My Touch ID has stopped working after I updated to 7.1! I restored it using iTunes even then the Touch ID works only sometimes ?? What to do?
I updated to 7.1. And since then the Touch ID has not been functioning, I restored it by using iTunes even that has not helped. Please suggest what should be done?
Same Problem....
Heeeeeeeelllllp!!
Similar Messages
-
the message:" Mozilla Firefox plugin-container has stopped working properly" appears regularly in my maintenance center. I am on Windows 7 and Firefox 3.6.17
I had the same type of failure. It was caused by a FF upgrade from V4 to V9.1. Dearing 1955 did not say what version caused the problem. My USB ports started acting up. I could not install the Webcam that was installed before. The HP Scanner of my OJ 8500 stopped working (USB). Did get it to work via Wireless. Removing FF did not clear the problem. Believe I have infected USB driver now.
-
My macbook wi-fi has stopped working altogether. What can I do to remedy this?
My Macbook wi-fi has stopped working completly. It was not a matter of the wi-fi being off and on but rather when it failed, it failed and never worked again.
Has anyone experienced this happening and what are the remeddies to the problem?You should check if this is a hardware problem. In OS 10.9.2 you can do this:
Apple menu / About This Mac / More Info / Overview / System Report.
(note the details of this path are different in other versions of Mac OS X.)
Under Network in the left column, select Wi-fi. If your hardware has failed, the right side will say something to the effect of no device detected.
If the hardware has failed you will have to open the Macbook and replace the card - assuming your MB model allows that. If the hardware is detected, there are steps you can try, but they depend on details about your computer that you have not provided.
If you follow up with another post, please tell us what version of Mac OS X you are running, and the Model Identifier of the Macbook. -
Bingo Blingo has come up with an updated version 6.2. It is not showing up in the App Store. How do I get the latest update?
Check the updates through the App Store and if there has been a revision of the app for your device you will be able to compare the app on your device. If the app has been updated and the app update is not available through the App Store, delete the app then reinstall it to see if that resolves the problem.
-
Firefox Plugin container has stopped working (no matter what I try)
Windows 7 64 bit
Firefox 32.0
Dell Inspiron 5423 14z
I cannot get Firefox to stop crashing. I really don't want to switch to Chrome but it seems stable.
Things I've tried:
1. Uninstalling Firefox, erasing all App data. Downloading a fresh copy and installing it again.
2. Updating Adobe Flash.
3. Restarting Firefox with Add-ons disabled. (It still crashes)
Firefox still crashes.
Can anyone help me troubleshoot this? Thanks!Your System Details list shows an outdated Shockwave Flash 11.7 r700 version.
You can find the latest Flash player versions for Firefox on this page:
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html
If you have submitted crash reports then please post the IDs of one or more recent crash reports that have a "bp-" prefix:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the Report ID of recent crash reports on the "Help > Troubleshooting Information" page (about:support).
*Click the "All Crash Reports" button on this page to open the <b>about:crashes</b> page and see all crash reports.
If necessary then you can open <b>about:</b> pages via the location/address bar.
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter -
Approximately two weeks ago, I installed an update to Firefox. Immediately after that, I keep getting signed out of my email, even while I'm in the middle of reading it or composing an email! It's very frustrating!
Check the Security panel of System Preferences and see if there's a select under the "General" tab of "Log out after xx minutes of inactivity". If that's not the case, launch the Console utility and see if there are any messages that might explain the log out.
-
Adobe Dreamweaver CS6 has stopped working on windows 7 32 bit
I just installed CS6 on windows 7 32 bit. When I try Dreamweaver, it is showing the error 'Adobe Dreamweaver CS6 has stopped working'.
This is what I am seeing:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-01-24T16:09:38.000000000Z
EventRecordID
41162
Channel
Application
Computer
MJ31H6V
Security
EventData
Dreamweaver.exe
12.0.3.5861
50be54e4
ntdll.dll
6.1.7601.18247
521ea91c
c0000374
000c3873
2bbc
01cf191eab5b3117
C:\Program Files\Adobe\Adobe Dreamweaver CS6\Dreamweaver.exe
C:\Windows\SYSTEM32\ntdll.dll
ec6e2868-8511-11e3-8811-f80f418906ef -
My sound has stopped working only on games
Works fine for Internet and music
How do I fix this?If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
I have a problem "premiere cc has stopped working" and SpeedGrade too.
Windows 8.1,lenovo Z500,GT740M,HD Graphics 4000
I use CS6 before and it's work correctly but when i try to use a Premiere Pro cc i always have a problem "premiere cc has stopped working"
but sometime it's work so I link it to SpeedGrade to do a color collection and it have same problem "SpeedGrade cc has stopped working"
How can I do with this?
Thanks.>GT740M,HD Graphics 4000
IF that means you have two graphics adapters, read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2 -
Pro L10: After using a wireless mouse, the touch pad has stopped working
Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. On start up the touch pad icon shows and the touch pad operates intermittently, after a few minuets the icon disappears and the touch pad stops functioning. In the control panel/mouse & or device drive I can the program operating and then disappears.
I have removed the software and reinstalled to no avail. On occasions I get a message to say that another pointer is in operation.
Can you help?Hi
It seems that the wireless mouse or the wireless mouse drivers/software has a bad influence on the touchpad.
I dont have a proper solution for this issue. Well, you can check the Toshiba driver page for newest driver updates. If the updates doesnt solve this issue so I suggest to use either the wireless mouse and disable the touchpad with the key combination FN+F9 or to use a common USB mouse.
I assume that you dont have any problems with a common USB mouse. -
"iTunes Has Stopped Working" when syncing iPod Touch
So in the last few days, I've been getting an error message when I try to sync my iPod Touch 2g with software version 3.1.2. After a few seconds, I get this error message "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." It only happens when I plug in my iPod for syncing.
I've been up and down the message boards here looking for a solution and I can't seem to find anything that works. I've uninstalled/reinstalled quicktime, then the iTunes software, I've deleted and remade my iTunes library file... I'm just at a loss. Here's the error information windows gathered up...
Source
iTunes
Summary
Stopped working
Date
1/10/2010 1:45 AM
Status
Report sent
Description
Faulting Application Path: C:\Program Files (x86)\iTunes\iTunes.exe
Problem signature
Problem Event Name: BEX
Application Name: iTunes.exe
Application Version: 9.0.2.25
Application Timestamp: 4afca401
Fault Module Name: StackHash_0a9e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 00000000
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Extra information about the problem
Bucket ID: 830098715
Anyone know how to help???Hi Zainabe_nachaby,
If you are having issues with iTunes unexpectedly quitting when syncing, you may find the following article helpful:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Regards,
- Brenden -
"itunes has stopped working" after downloading album artwork??
For years I've avoided ipod and itunes like the plague...but about 2 weeks ago I gave in. I got an ipod touch and installed itunes. Everything was fine - until this afternoon when I clicked on find album artwork in itunes. After itunes finished going through the process of finding the artwork ( 1400 of 1600 files found, 1450 of 1600 found, etc...or something like that ), i got the error message that *itunes has stopped working*. I've been searching forums all night and tried uninstalling eveything "apple" and reinstalling. Apparently this error comes up for A LOT of people ( problems like this are why I never wanted an ipod... ). None of the recommended fixes are working. I'm assuming something went wrong during artwork downloading????? Or not? I don't really care why actually, but, if itunes crashes every time i hook up my ipod, what good is it ( or the ipod )...and i don't know what to do with the ipod ( how to download apps, or add music, photos and videos ) w/o the itunes. My previous media players were all drag and drop ease.
I'm a newbie - and i'm rally frustrated - so please be kind. Can anyone tell me - in plain terms - how to get my itunes to not "stop working" every time i hook up my ipod?? Please?
THANKS.OK, so after looking everywhere for an answer - with no luck - I figured it out on my own ( don't ask me how... ). I'll tell you what I did. I bet you have the same problem. Honestly, I thought I'd be returning the **** thing, but it's fine now.
I'd plug in my ipod ( 32gtouch, like yours ), and itunes would open. Everything was fine until it started to sync my music. Then it would freeze, give me the error message, and then shut down. I did this probably 10 times throughout the day, and always the same. Then I noticed it always froze at the same place during the sync. Soooo, I finally realized I must have a corrupt file.
Step 1: Do as I did, but when it starts to freeze, take note of the name of the song it freezes on. That's probably the culprit .Remember it. Let the error message come up and close as always...
Step 2: Open itunes again! Click on your ipod, and then on the music tab. Immediately un-check "Sync music" ( top of the page ) and then click "apply" ( bottom right ). DO THAT FAST...before it has a chance to sync, or it will just freeze again!
Step 3: Go into your music library on itunes, and DLETE/REMOVE that song.
Step 4: Close itunes.
Step 5: Open itunes, and go again to your ipod, and click on music tab. This time, check the "sync music" box ( and apply ).
That should fix it. If it doesn't you have more than one corrupt file. In that case, close itunes and then open it again. Follow step 1 and 2 again. Remove any songs from your library that aren't that important to you ( especially those that were from questionable sources... ). Basically, you need to figure out which song ( or songs ) are causing the problem. If you just delete them all, you'd have to add them again one at a time to avoid the problem again, and that would be a pain. So, just remove as many as you feel like ( out of 1500 songs or so, I removed a couple hundred ). I left mainly the ones that were from my actual CDs or that I had bought through Amazon ( or other legit source ). I removed most of my Limewire downloads. Most of them are probably fine, but I'll add them later one at a time to be sure...
I still have plenty of Limewire songs on there, and they are fine, but, as you know, you do get bad files sometimes.
Anyways, once I did this, everything is fine and works great. I even started adding album art manually, and at one point it froze again. So, I did steps 1 and 2 again, and removed the album art I last added, and then synced again, and it was fine. Usually, the album art I add is OK, but I had that one pesky photo I guess ). So, I guess the thing is after you get the majority of your music on, just add and adjust things a little at a time, and you'll always know which file is causing you problems ( hopefully no files will!! ).
I hope this works for you. Let me know if you have any questions, and let me know if it solves your issue too!
Peace.
-*** -
I have a problem with my viber.It has stopped working.I tried reinstalling it again .On the setup option after entering my phone number and continuing ..it either exists or gives no service message .My other applications are working fine ..other applications that require internet too are working fine.
Please get in touch with Viber's customer support.
-
Hello,after the last apdate iOS 7.1.1 my iphone has stop work with the bose dock station. why it is happens?
Natan turbo hadar,
I have the same exact problem.
I put an iPod shuffle on the Bose system, it plays just fine.
My iPhone 4s works just fine connected to my car stereo.
My iPhone 4s on the Bose will charge, it "thinks" it's playing, song shows, time line shows it's playing, can pause if I touch the phone's screen.
The remote for the Bose WILL NOT pause it, forward to next song, etc. It does work with the iPod shuffle.
So it's not the Bose, it's not connections, it's the iOS 7.1.1
Everything worked fine before, any one else have suggestions? -
my ipod touch has stopped working. I will plug it into a wall, or computer, and it will register that it is plugged in, but it will not charge and turn on. does anyone have any advice? thank you.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Journal post request failed with an ERROR, and refers to see LOG file Which displays following LANGUAGE, that is not understandable by me please tell me how to resolve the issue General Ledger: Version : 12.0.0 Copyright (c) 1979, 1999, Oracle Corpor
-
Hi all I have an IDES EP 6.0 system along with BW 3.5 in the same system. Now when i logon to the sld home page through http://localhost:50000/sld, i need to see the technical description of the BW system Will i be able to see that? Pls help. Thanks
-
ClassCastException While using ArrayDescriptor
Hi, Can anybody help me with this,I'm trying to insert some data in a nested table(Oracle 8i) , for which i need to create an ArrayDescriptor which needs to be passed to the ARRAY on creation , if i directly get the Connection from the driver , it wo
-
Saplogon.ini paramters for v7.2
Can Themes/Colors/and other settings be controlled by this file? There are entries in HKLM for some SAP setting but did not know if this .ini has any priority over registry settings. Also is there an OSS note that gives me all the values and settin
-
Need help transferring downloads...
My old computer is completely ruined and I want to access the music I have downloaded from iTunes on my new laptop, is that even possible? Home sharing is not an option, nor are any of the other methods listed on the help sites.