My touch screen isn't working so I can't use my iPad.any ideas how to get the touch screen working again?
My son has done something to his ipad2 and now his touch screen does not work so he can't get from the lock screen as the screen isn't responding to touch. Any idea I can't even switch it off to restart.
Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
If no joy... Try a Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
From Here
Unresponsive iPad
http://support.apple.com/kb/TS3281
Similar Messages
-
I set up a new PIN to lock my screen for security. Now I can't unlock it. Any idea how to undo this so I can use my phone again?
Someone else had replied with that same remedy and if that's all it takes, no worries. However, it is tellig me that after 10 unsuccessful tries it will reset my phone back to zero and I lose everything...pictures, emails, texts,etc. Is this true or not...do you know? Thanks.
-
I had a group account on mobileme...a family pack that each of us at work had an individual account and we all shared one account in the family. It kept our work calendar- a schedule telling who is in the office and who is on call. This is still on my macBook but not on my phone or my iPad. Any idea how I make my phone show the calendars on my MacBook? It was there before I went to iCloud.
If your email account offers a webmail access, I suggest checking the webmail - log in to your account using the webmail access, and I predict you will see all those "unread" emails there and can dispose of them from there.
This happens because the iPhone that went bad, when reading those emails, did not remove them from your email provider's servier. -
i bought an IPAD air (32 gb wifi only) from USA just one month ago and the screen is not working correctly(picture attached) and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?
Have you tried a soft-reset to see if that fixes it ? You might be able to get warranty service in Egypt for your iPad, but the warranty includes :
IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
As it's wifi-only you should have a better chance of it being serviced under warranty, but there are no guarantees, it might depend upon the repairer.
Egypt authorised service providers : https://locate.apple.com/eg/en/ -
My iPod touch is not connecting to my iCloud account, under iCloud settings it has my old email account and username that I have since updated and are working correctly on my iPad, any idea how I can reset this on the iPod or otherwise? This old account info keeps coming back on my iPod and messing up access to my apple account and now the icloud. last time a system restore needed to be done to fix it....
It won't give me the option to sign out of the old account, it's that light grey color that you can't click on. And since it has the old email address that it's telling me to go into to verify the account, I can't actually change it... I'm stuck
-
i have recently had my hard drive replaced due to a fault whilst in Germany working. Happy with the replacement, however when i go to log on as a user that screen is in German? Any idea how to change the language?
Greetings Lex,
Kind of you to comment ... but you are also adding years to my signature! I know I'm 76 but I don't want to think about it.
Regards 71. -
The voiceover on my ipod touch has stopped working. Not sure what i have done to stop it. anyone any idea how i get it started again?
Turn VoiceOver on or off: Go to Settings > General > Accessibility > VoiceOver. You can also set Triple-click Home to turn VoiceOver on or off. See “Triple-click Home” on page 129.
copied from page 120, ipod touch user guide 5 -
I can not charge my Ipad after I droped it,also the home screen dos not work,whats the solution?
i can not charge my Ipad after I droped it,also the home screen dos not work,whats the solution?
Hard Reset
Press and hold BOTH the Sleep/Wake button & the Home button until you see the Apple logo on the screen.
if no result try to back up and restore via itunes on a computer.
if wont restore try this
recovery mode
open itunes on computer
plug cable into computer not iOS device
turn device off
hold home button and plug cable into IOS device. do not release home button until an itunes graphic appears on IOS device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808 -
How to get the webcam to work?
Hi,
As I don't have an instruction book for this computer, can anyone tell me how to get the webcam to work please?
There is supposed to be something that pops up from the side of the screen, but I've left the mouse sit there for ages on all sides and nothing. Please assist me.
Kit_eI refer you back to my original question.
There used to be a bar at the side that popped up when you left the mouse sit there for a bit. It no longer pops up ... ie: it's disappeared and will not return ... this is what "started" the webcam for use as a webcam.
I have no idea on how to use the webcam from any other place. There is no icon. There is no mention of it in the programs list. There is nothing. There is a webcam sitting there in the laptops lid, but I can't find where to "access it". Like I said there is no icon, nothing in the programs list.
I want to be able to use it. You know, like you use a webcam. On the web, as a camera. No particular website or software that I have in mind.
Thanks. -
HT5437 How can I use apple TV to connect my computer to the tv screen as an external monitor?
How can I use apple TV to connect my computer to the tv screen as an external monitor?
Morning jotref,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
About AirPlay Mirroring in OS X Mountain Lion
http://support.apple.com/kb/ht5404
Best of luck,
Mario -
I have just reset my my iPhone 4s and it is stuck on the apple screen, not being recognised by iTunes and fully charged, any ideas how to get it to turn on properly?
Hi Cjroyle,
Thank you for using Apple Support Communities.
From your post I understand that your iPhone will not boot past the Apple logo on the screen. To troubleshoot this issue I'd like you to please follow the steps in the article below.
iOS: Not responding or does not turn on
Take care,
Alex H. -
I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?
You need to use the right arrow on the remote to go all the way to the right. The submit button will be highlighted and you can then press select on the remote to proceed.
-
Bridge CC keeps crashing on start up but was working last week - Any Ideas how to get it back. Have tried uninstalling and re installing software. All other CC software working fine (Mac)
Also some problems since the CC2014... For me i can launch bridge but the crash occurs when i try to change access to any bridge preference... i open a discussion about it
-
How to Get the Debugger Screen in WEB Front end of SRM
Hi Gurus,
I have couple of questions for SRM.
1. How to Get the Debugger Screen in WEB Front end of SRM so i can debug the application which is running in EBP system??
2. How to set the flag for external debugging (HTTP)??
3. Using SICF how to set the ITS services ( Like BBPSC01 )for internal ITS so as soon as i place the order it should stop at the break point which i have set in the application.
Thanks.
Regards,
Manoj TiwariSetting up Debugging for Integrated ITS
Tcode SICF.
Select service (e.g. default_hostàbcàguiàsapàitsàbbpsc01).
Change service settings and insert parameter ~GENERATEDYNDPRO=1.
Find program to debug. E.g. SE93. Enter bbpsc01 à Display and get Program field (SAPLBBP_SC_UI_ITS)
Execute SE38 and enter program name.
Turn HTTP Debugging ON. UtilitiesàSettingsàDebugging. Click Actv and username.
Add HTTP Breakpoint. Display source code and select Utilitiesàbreakpointsàset.
On External Debugging select HTTP Breakpoint.
Remember to remove breakpoints, deactivate debugging and remove parameter GENERATEDYNPRO.
Can run program RSBREAKPOINTS to find which programs you have breakpoints set in.
Have fun with EBP
If you have any more questions i would be happy to help you. Send me mail on [email protected] -
I have a new airbook, 10.7.4 LION, thunderbolt ethernet adapter and when trying to install 1.2.1 thunderbolt upgrade it says "this software not supported on this system"? Any advice on how to get the adapter to work?
Welcome to Apple Support Communities
If you purchased the computer before 2010, your computer hasn't got Thunderbolt, so you can't use it
Maybe you are looking for
-
How do I get numbers spreadsheets to open at the last entry?
I work with Numbers spreadsheets often and find it very frustrating that on opening a document it opens at the top rather than at the last place of entry. My frustration is that some of the spreadsheets I work with are fairly long and require me to t
-
I don't have any tool space on the top of the page. only home and favorites google too. I also don't have to bottom where I can press to get to my programs. I do like firefox. But the text is way to small. How do I fix these things?
-
Hello Planning Guru's, how is it possible to insert a blank line in the webform in planning? Many thanks, whitebaer
-
DMS integration with QM Notification
Hello, I have configured DMS screen in QM customizing and have created a DIR that I linked to a Quality Notification and attached an original file. My issue is that when I go to the Notification and select the Documents tab, the DMS documents do not
-
I have a zone created for FTP users I am trying to create home directories for individual users. I am using useradd command and /home/user-name as the home directory but there is no direcotry being created. The zone is created on a Veritas Volume. Wh