My touch screen will not work at all. I cant even turn it off, so i dont know what do to?

My touch screen will not work.

Hey ajnissly25,
Thanks for the question. If I understand correctly, the touchscreen on the iPhone wont work. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
Thanks for using Apple Support Communities.
Have a great day,
Mario

Similar Messages

  • My touch screen is not working at all and I've tried numerous times to turn it off and on but with no success to getting the touch screen to work again.  Any suggestions to get it back working?

    My touch scree will not work at all.  It just stopped one day and has not worked since.  I've tried numerous times to restart it but with no success at all.  The only tning I haven't tried is resetting it back to it's original setting when I bought it 2 years ago>  Any suggestions??

    When resetting the iPod to factory defaults/new iPod fails to resolve a problem, the problem is likely due to a a hardware problem. An appointment at the Genius Bar of an Apple store is then in order.

  • My ipods internet doesnt look how it should , and my app store will not work at all , should i bring it to the apple store to see what they say ?

    my ipods internet doesnt look how it should , and my app store will not work at all , should i bring it to the apple store to see what they say ?

    What do you mean by "my ipods internet doesnt look how it should"?
    What happens when you try to use the App store? Error message?

  • The screen on my ipod touch 3rd generation will not respond to touch, it will not work at all.

    My ipod touch 3rd generation fell off of a chair, it worked ok fow a while then the bottom half of the screen would not work, now the entire screen is not working
    I'm not sure what to do.

    You can try the following to rule out a software probem:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to  factory defaults/new iPod
    If you still have the problem they yu very likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My iPhone 4s touch screen will not work with an active SIM card in it.

    A few months ago my touch screen stopped working suddenly on my iPhone 4s. After I removed my active SIM card from the 4s, the touch screen started working again. As soon as I put my SIM card in again, it stopped working. I finally broke down and took it into a store where they replaced the screen. It started working again for about 5 days. Then this morning it just quit working again. I have restarted it and reset it. All of the software was up to date when it stopped working, so I haven't done anything with that. Could someone please help me with this? It's getting a little frustrating.

    Hi ironmaiden316,
    If the touch screen on your iPhone isn't responding, you may find the troubleshooting steps outlined in the following article helpful:
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Regards,
    - Brenden

  • My screen will not work at all. Any advice?

    My touch screen as completely quit working.

    See Here...
    iOS: Not responding or does not turn on
    TROUBLESHOOTING iiPod Touch Hardware
    http://support.apple.com/kb/TS2771

  • My iPod touch screen will not work.

    Ever since last night, my iPod's touch screen has been messed up. I didn't use it incorrectly or anything; I just used my iPod like I normally did for the past eight months. I have seen no problems until now. The iPod's keyboard is screwed up, when I press the letter "a" the capitalizing button is activated. They same is repeated over and over among over letters as well. The first sign of the issue was when I was trying to watch a video, the play button refused to be pressed and random things were constantly activated while I did nothing. The lock screen slide doesn't work either, the only way to get into my iPod is my activating the lock camera and then pressing the home button. Should I restore the iPod or is there a quick way to fix this?

    Your screen digitizer needs to be replaced. See options in link below.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • My ipod 4th generation touch screen will not work when i touch it its not reconizing my finger when you put a blanket on a screen and try to touch it wouldnt do anything help please

    does any body know why

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • TS1399 My ipod will not booot up, it continues to blink the apple logo, and i dont know what to do. Also i have a second ipod touch 4th generation and it is llocked and needs to be connected to itunes, but wont even be reconized, i no longer have the orig

    My ipod touch wont boot up it shows the apple logo and then blinks on and off.
    My second ipod touch wont connect to itunes/be recononized it is totally locked.. i looked at videos on the internet, and they say connect it to the FIRST computer that it was connected to,, the only thing is i no longer have that computer... so what do i do

    For both
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My iPad 2 touch screen will not work. The screen is currently locked. The sliders work, but the number pad doesn't! My screen was shattered months ago, and worked fine until recently. I need to delete confidential info before replacing the glass. HELP!

    Again, everything worked perfectly until about two days ago. Out of nowhere, the numbers on the unlock screen stopped working. The sliders still work, the photo button still works. I've tried reseting it multiple times, and powering it off multiple times as well! Any help would be very helpful. It needs to be fixed as soon as possible for a private buyer. Thank you!!

    Have a read at all this, including the links. I personally would then proceed in this order.
    Open iTunes on your computer. Connect your device (iPad or whatever) to the computer.  Hold both home and power buttons for exactly 10 seconds, release the power button, keep holding home button until your device recognises it is in Recovery Mode. (Perhaps 10-20 seconds.) If the device screen is black (blank) then it is in DFU Mode.
    See this link and note the sentence commencing, 'If you restore from a different computer.... ' down near the bottom of the page.
    http://support.apple.com/kb/HT1808
    Unresponsive iPads
    http://support.apple.com/kb/TS3281
    http://www.youtube.com/watch?v=OXlY-VcxbCU&feature=youtu.be

  • Have a 3rd generation ipod touch and the touch screen will not work.

    What should I do?  My iPhone sometimes does this and there is a key on the side that I always hit and it makes it work again but my ipod doesn't have that.  What to do what to do what to do

    Try the standard fixes:
    - Reet. Nothing is lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/nw iPod.
    If you still have the problem it is likely a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My i pod touch touch screen will not work it will not unlock or power of i tried restoring 2 times that did not work out does anyone know how to fix this massive problem

    i need help please

    Restore to factory settings/new iPod if you have not do so already. If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • The touch screen will not work properly and squares appear around the icons but I cannot remove them

    H

    You can not delete Apple supplied apps, such as Contacts, Reminders, Text, etc. You can only get the X to delete 3rd party apps downloaded from the App store.

  • HT4528 My touch screen is not working at all.  I can't get into my phone at all.

    I can't access anything in my phone.  Using my bluetooth in the car I can answer/make phone calls.  But that is it.  I can't even turn my phone off. 

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • I just took my new MacBook Pro out of the box and the screen will not work. Display is, black no life to the screen at all

    So I just ordered my first Mac book Pro. I took it out of the box and hit the power button to do the start up and the screen will not work at all. I shut the computer off and back on again. I plugged it in and unplugged it. I've done everything I can think of and the screen still stays blank with no life at all

    Is the battery charged? Press the little button on the left edge, near the front. If no green dots, no charge.
    Does it charge? When you connect the MagSafe charger, does the pilot light on the plug light up?
    Does it actually start? Should sound a chime after you press the power button on the top/right corner. If it chimes, does the Caps Lock pilot light when you press it?
    If it starts and Caps Lock does flash on and off, have you tried pressing the screen brightness control for awhile? F2 turns up the brightness, may be turned fully down.

Maybe you are looking for

  • Unable to install Adobe Muse

    Hi there. I'd very much like to try out Muse (I'm a paying Creative Cloud member), but I'm about to say to hell with it. Muse refuses to install. Here are the steps taken. Ran the Muse installer throughApplication Manager. Installed. Clicked Launch A

  • How to clear open posting change notices (Movt type 309)

    Hi, I want to clear the open PCN's created with mov type 309 (Posting change, general) being shown in LL01. All these posting change quantity are positive. I am not able to nullify them because there is no stock of those materials. Whenever I try to

  • Signed applet throws security exceptions

    Since nobody seems to be reading the Signe Applet forum, I decided to try here: Hi all I have problems with signed applet (self-made cert), and after reading this forum I see this is more or less common. The problem that I am having is, that I can no

  • PO receipts getting linked to differrent PO

    Hi We are facing an issue in which the PO receipts are stuck in the interface and receipts are automatically getting linked to a wrong PO. A single receipt is linked to two different PO's but when i look at the source file it should have been linked

  • Execution time of a SQL

    Hi, I have a sql which loads a table (84 million rows) across the network from one instance to another in another server. How do I know the elapsed time during loading? ( I know this sql takes over 2 hrs to copy the table. But at any given (the sql r