My Touchpad Has Stopped Working, Please Help

My touchpad has locked itself. I can't click even with the buttons that are below the touchpad, it doesn't scroll or move, it won't do anything whatsoever. It has done this before, but usually it just works itself out on its own after a few minutes of leaving it alone. But not this time, this time it's been like this for a few days already. I tried to do the F2/F9/F10 solution that was talked about in one of the topics I read, but...pressing F2 doesn't do anything on the splash screen for me, let alone be able to do the other stuff that was mentioned. System Restore also hasn't done anything. I have a wireless mouse for the time being, but I'd rather have my touchpad back if possible because...being a wireless mouse...it basically eats batteries like they're candy...so to speak. >.> So, here's my model's info, I hope you guys can help me with it. Toshiba Satellite C55-A5354Part NO. PSCF6U-04T00CWindows 8.1 64-Bit If more info is needed, let me know and I'll try to find it.

I have turned off auto update, I'm not sure where to go to uninstall an update though, I can turn it off but not uninstall, lol. But the last update was a couple of weeks ago and my mouse has been fine up until like three days ago, so I don't think an update caused it. I uninstalled the driver and let it automatically reinstall twice now, but nothing. Just in case it's helpful, here's the driver info too. Driver Name: Synaptics PS/2 Port TouchPadVersion: 17.0.10.51

Similar Messages

  • Itunes has stopped working - Please help - Can't SYNC !!

    I have windows 7.
    I have the latest Itunes.
    My Itunes works fine.
    When I plug in my iphone 4 I tunes works fine.
    Whe I click sync Iphone, it gets to step 3/4 of the sync process and then it says " I tunes has stopped working" underneath that it says "Windows can check online for a solution to the problem". When I clikc view problem details I get:
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    iTunes.exe
      Application Version:    10.4.1.10
      Application Timestamp:    4e4e1904
      Fault Module Name:    QuickTime.qts
      Fault Module Version:    7.70.80.34
      Fault Module Timestamp:    4e13ba08
      Exception Code:    c0000005
      Exception Offset:    00146b30
      OS Version:    6.1.7601.2.1.0.768.3
      Locale ID:    2057
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt
    I have already tried uninstalling itunes, quick time and apple support programmes, and then reinstalling all of them.
    Help will be highly appreciated.
    Thanks.

    So sorry - I'm in the same boat!  Someone please help us out!!!!!

  • My keyboard has stopped working - please help!

    Hello.
    For some reason, the keyboard on my Satellite 1000 series notebook has stopped working (I think someone may have spilled some liquid on it...). Device manager shows 'easy internet keyboard' and 'logitech HID-compliant keyboard' (one of which relates to a USB keyboard i have been forced to buy).
    Any chance anyone knows what's happening and how I can get my keyboard working again? Maybe something to do with reinstalling drivers??

    Hi Adam
    If someone has spilled some liquid there must be hardware malfunction and I assume that keyboard is defect now. Try to contact service partner and pick up some information how much the new keyboard costs. You can also a Google a little bit around and find which keyboard fit to your notebook model.
    In my opinion you can exchange it alone.

  • My Refine Edge in Photoshop CS6 has STOPPED WORKING, please help!

    Photoshop CS6
    Windows 8.1
    I have been using refine edge with no problem for months.
    everything worked great!
    I was able to extract out hair and edges very, very, very well...
    but about 2 weeks ago...something changed... the refine edge brush no longer works.
    When I click on Refine Edge... instead of a brush icon, I get the CIRCLE with a SLASH and my system keeps dinging because the tool is just not available.
    I deleted my preferences...but it is still a problem
    NOW... when I adjust the sliders, i don't see a preview of the adjustments...
    Please help!!!!

    no difference.
    i have tried to check and uncheck everything...
    if i adjust the sliders, i get NO Preview... but when i click OK, the resulting photo has been completely ruined by the tool...
    I tried deleting preferences...no change
    the weird thing is that this problem was very sudden.  Just a few weeks ago, I was using refine edge with NO PROBLEM. it is my GO TO tool for extracting people out of pictures...
    but then one day, it just stopped working...
    Do i need to reinstall CS6???

  • Printing subsystem has stopped working - please help

    I have had my imac for 4 months and now priniting has stopped.
    I have a canon 4300 for prints and an HP office 6200 for B&W everyday stuff. The canon is directly attached via usb and the 6200 is attached to my new AEBS. i can configure my canon just fine using print and fax utility however it finds the HP via bonjour automatically but when i push ADD it gives an "error trying to add the selected printer" and the error says "successful-ok-conflicting-attributes."?
    I also seems to find the same 6200 printer as a shared printer and will config and add it ok but somehow i dont think thats correct.
    When i try to print to the canon i get an error from any application - some say not enough memory - I have 2GB. Same thing happens when i try and print to the HP. THe strange thing is that I can use the maintenance utiliies to get to the canon and it runs them so the connection is ok something with the print subsystem.

    Plot thickens, I can print to these printers just fine from my wireless attached macbook pro! Interesting it sees the HP as Bonjour and the Canon as direct attached - it does see the extra HP "shared". This seems to be isolating it to the imac and not the printers or connections. Please help this is tough,

  • Quicktime has stopped working - please help

    Hi,
    I've been using the quicktime that comes with the machine (haven't purchased the upgrade). A little while ago I downloaded a few add ons for quicktime from apple's quicktime components page (http://www.apple.com/quicktime/resources/components.html) because I thought they would help me play some obscure file types (they didn't).
    In any event, I don't know if it's related, be since then I'm getting a lot of blank screens on websites with just the Q symbol and a question mark. For instance, I can't play anything on youtube. Where the video should be is just that Q symbol and the question mark. I seem to have no problem playing things like the mac vs pc commercials on apple.com.
    I'm willing to put my quicktime back to the way it was if that would fix this, but I don't know how to do that.
    Any suggestions would be welcome. Thanks.

    YouTube videos are nearly all Flash media and to view them you must install Flash Player (free) and its browser plug-in.
    You may also need to "turn off" the QuickTime browser plug-in from trying to play Flash media.
    Sys Prefs/QuickTime/Advanced/MIME Settings button
    Remove the check mark (Miscellaneous) for Flash Media.
    Quit and relaunch any open browser and try the pages again.

  • Satellite C series - Touchpad has stopped working running Windows 8

    Hi
    I dont know if anyone can help.
    My touchpad has stopped working.
    At first it would only work on the login page. Now its not there at all.
    I have only had my Toshiba C for a few days and its the first time I have used Windows 8.
    I have tried F5 and I have tried going onto BIOS using F2 when booting but that wont come up.
    Help plz

    Hi
    Please check this Toshiba document:
    +How to change the Synaptics touchpad settings in Windows 8?+
    http://aps2.toshiba-tro.de/kb0/HTD3101Z30000R01.htm
    Be sure that the required touchpad settings are enabled!

  • My iphone 3g is not charging and the middle button has stoped working please help. My phone has no power now

    My iphone 3g is not charging and the middle button has stoped working please help. My phone has no power now an i need help

    For a broken home button you can find your options here http://www.apple.com/support/service/

  • The click at touchpad is not working, please help!!!

    I use Macpro, recently the click at touchpad is not working, please help!!! Thank you !!

    For this issue AppleCare support told me to so a SMC reset as follows:
    Power the machine OFF.
    At the SAME TIME hold down the following buttons:
    Shift
    Control
    Option
    Power
    Then release all buttons.  Power up the Macbook and see if the trackpad button work.
    Hope this helps.
    Bill

  • Adobe photoshop CC 2014 is closing shortly after opening. It is saying it has stopped working. HELP!

    Someone help me please!!!! I just spoke with Adobe support on chat and they gave me step by step instructions to clean my adobe and what not and download the new photoshop, and it worked fine but then it is saying it has stopped working shortly after opening. The chat is offline right now someone please tell me yo ucan give me instructions what to do?!?!

    A friend gave me a link to AMD to update my driver and it seemed to work.
    Sent from my iPhone

  • Safari has stopped working! HELP!

    Ok so I have been using safari for over a year now on my windows 7 hp pc. Recently however safari has "stopped working". When i open safari i get an error message stating "safari has stopped working" and then under that is a green loading bar stating "windows is checking for a solution." When i wait for a solution nothing happens and safari just shuts down. Ive tried uninstalling it and then reinstalling it but the same problem occurs. Ive even tried going into "uninstall a program" and repairing both safari and apple support center.....still no luck. Please help im using internet explorer right now and i hate is so much...i miss safari

    Recently however safari has "stopped working". When i open safari i get an error message stating "safari has stopped working" and then under that is a green loading bar stating "windows is checking for a solution."
    Fingers crossed, your Windows 7 will have been recording some additional information about those.
    First, open your Action Center and expand "Maintenance". Click "View reliability history":
    Once the reliability report has been generated, look for Critical events for Safari generated at the time of the "Safari has stopped working" messages. Doubleclick the name Safari in the critical events. (Don't click View solution.) Here's a screenshot showing what to doubleclick:
    You should see something that looks like the following screenshot:
    Copy and paste the contents of the problem report into a reply here. For example:
    Description
    Faulting Application Path:          C:\Program Files (x86)\Safari\Safari.exe
    Problem signature
    Problem Event Name:          BEX
    Application Name:          Safari.exe
    Application Version:          5.34.55.3
    Application Timestamp:          4f6ba239
    Fault Module Name:          StackHash_7100
    Fault Module Version:          0.0.0.0
    Fault Module Timestamp:          00000000
    Exception Offset:          7d3a1240
    Exception Code:          c0000005
    Exception Data:          00000008
    OS Version:          6.1.7601.2.1.0.256.1
    Locale ID:          2057
    Additional Information 1:          7100
    Additional Information 2:          710027e7a8d30022e5e0ee529f40121f
    Additional Information 3:          5158
    Additional Information 4:          5158ee4164428f7b514a5e7ee9654f7c
    Extra information about the problem
    Bucket ID:          2871481836

  • The "enter" key on the numeric keypad of my external mac keyboard has stopped working. Help!

    The "enter" key on the numeric keypad of my external mac keyboard has stopped working with my Macbook pro.  If I plug the keyboard into any other computer, that entier key works fine. I'm using a standard Mac wired keyboard, & it's worked fine for 2 years now. Help!
    This is the keyboard I am using: http://store.apple.com/us/product/MB110LL/B/apple-keyboard-with-numeric-keypad
    Not sure what I might have accidentily done to disable the enter key. (The normal enter key works fine, just the one on the numeric keypad.)
    Thank you for your help.

    Hi there,
    Do you have any resolution to this problem in the end? Because it happened to me an exact same thing.
    Please share if you have found a solution to your problem. I also cannot think of what I did wrong to disable the Enter key.
    Best Regards,
    Jeffri

  • TouchPad has stopped working in Satellite L300

    Hi Xaxer, hi there,
    as I dont know how to post a new topic, I just reply (I apologize for that way).
    The touch pad on my L300 has stopped working. (Vista 32 bit). Fn and F9 does not change anything.
    USB-Mouse works fine. Downloaded new touch-pad driver.
    Touch pad is not shown in the device manager.
    What should I do?
    Any idea?
    How can I check whether the tp-driver is installed properly?
    Thanks in advance.
    Heinz

    > How can I check whether the tp-driver is installed properly?
    Go to control panel -> mouse -> last tab (Advanced or Pointing device) -> Advanced button
    There you should see all touchpad settings.

  • When i use Adobe Premiere Elements 10, after about 10 minutes it stops working please help

    I recently purchesed Adobe premiere elemnts 10 and it installed correctly, and it loads up fine but once i start putting video together, it starts to mess up, the video i cant watch because its very slow and jumpy and then after a few minutes of me editing a message pops up saying Premiere elements 10 has stopped working, and windows dose not give me a reson why it just stops, i am stuck with what it could be, the video i am using is from a dslr and is in full hd but that works on windows movie maker fine but dose not seem to work on this programe any help with this would be appriceated

    >dont know what you mean by codec
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen
    shot works well to SHOW people what you are doing
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainfo.massanti.com/

  • My touchpad has stopped working. how can i fix it? HP Envy 15 2012

    HP Envy 15 A9P60UA#ABA
    WIndows 7 64-bit
    The touchpad has stoppped working suddenly. The pointer does not move when the touchpad is used. I have plugged in a USB mouse, but i did not select the option to disable the touchpad while the mouse is plugged in. It has worked for the past week with the mouse plugged in, but has suddenly stopped.

    http://www.apple.com/support/iphone/assistant/application/
    The step I expect will fix it is http://www.apple.com/support/iphone/assistant/application/#section_3

Maybe you are looking for