My touchscreen doesn't work properly when I'm on louspeaker

Can someone please help me as my touchscreen doesn't work while i use my phone on loudspeaker

Hello, Dean6.
Thank you for the question. You may find this article helpful in troubleshooting your touchscreen response issue that you are experiencing.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Cheers,
Jason H.

Similar Messages

The cable doesn't work properly when connected as data cable.

Hi,
I have recently encountered problem of the cable. The thing is that if i use it just for charging with the plug, it works fine. But when i wanna use it with computer (i.e., accessing itunes, etc) or with my car, it doesn't work properly, it keeps switching between charging and discharging very fast. I will appreciate your quick support!
Regards,
Farhan

Just for all the people to know, I found out the solution. You have to mark the correct side of the charging cable which connects at inlet of the phone. Because this point acts as a chip when used as data cable or auxiliary use (car,etc). That's why it charges with the plug on any side. I don't know what's the frequency of it happening to iphone 5s users, because I bought it recently (iOS 7.1.1) Hope it helps to others in future.

Preview ok,but doesn't work properly when build dvd

everything is ok when preview but when i built to dvd folder,media player classic only could play separate dvd file,and no main menu. then i try windows media player, the main menu came out but none of the buttons work.
Any ideas? Thanks a lot

sorry about the multiple posts. mines is encore DVD 2.0 trial on windows XP. I've checked the help and FAQ but none of them related to my situation. I've got 1 sub menu with 1 main menu. no problem when preview but when i built a dvd folder it doesn't work properly. media player classic couldn't play the main menu, sub menu work but not the buttons on it. windows media player can play the main menu but none of the buttons work either!! I've been working on it for a whole day. course work deadline is this Thu, so please give me some advice. Many thanks.

Ipad's touchscreen doesn't work properly.

Suddenly the touchscreen started dont responding properly .It has a month that i bought it and it was working normally until i was playing a game . I tried to restart it and pressing/heloding the sleep/wake button but still the problem is there . I holded the home button and tried to reset the "history" but i can't . The screen doesnt respond properly and it takes wrong commands . I appreciate any help and thanks .

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

My Macbook Pro with Maverick doesn't work properly when I restart it.

Hello,
I updated my O.S to Maverick in my Macbook Pro and this doesnt work properly with my wifi device BEAREXTENDER 1200.
I got this error when try to restart my computer.
I need some help : (
Thank u
Anonymous UUID:       2978698B-71D7-C168-62D2-BD94545F8053
Thu Dec 5 13:40:36 2013
panic(cpu 0 caller 0xffffff80040dc19e): Kernel trap at 0xffffff8004050944, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000008, CR3: 0x0000000005bb7000, CR4: 0x00000000001606e0
RAX: 0x0000000000000000, RBX: 0xffffff801999efd8, RCX: 0x0000000000000000, RDX: 0xffffff80046cb940
RSP: 0xffffff80f4bfba00, RBP: 0xffffff80f4bfba30, RSI: 0xffffff801999e000, RDI: 0xffffff8006bdd360
R8: 0xffffff80046d2b30, R9: 0x0000000000000000, R10: 0xffffff80f4bfb990, R11: 0x0000000000000009
R12: 0xffffff801999e008, R13: 0x0000000000000000, R14: 0xffffff801999e000, R15: 0xffffff8006bdd360
RFL: 0x0000000000010246, RIP: 0xffffff8004050944, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x0000000000000008, Error code: 0x0000000000000002, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80f4bfb690 : 0xffffff8004022f69
0xffffff80f4bfb710 : 0xffffff80040dc19e
0xffffff80f4bfb8e0 : 0xffffff80040f3606
0xffffff80f4bfb900 : 0xffffff8004050944
0xffffff80f4bfba30 : 0xffffff800405151a
0xffffff80f4bfbb10 : 0xffffff80044836e6
0xffffff80f4bfbb30 : 0xffffff7f859ad608
0xffffff80f4bfbb60 : 0xffffff7f859959b7
0xffffff80f4bfbb80 : 0xffffff800444c3d3
0xffffff80f4bfbbb0 : 0xffffff800444c24d
0xffffff80f4bfbbd0 : 0xffffff8004461e74
0xffffff80f4bfbbf0 : 0xffffff8004490e44
0xffffff80f4bfbc70 : 0xffffff8004490477
0xffffff80f4bfbcb0 : 0xffffff800449020a
0xffffff80f4bfbd10 : 0xffffff80044917dc
0xffffff80f4bfbd20 : 0xffffff7f84a7172a
0xffffff80f4bfbd40 : 0xffffff7f84c30b46
0xffffff80f4bfbd80 : 0xffffff7f84c305b6
0xffffff80f4bfbde0 : 0xffffff7f84c26980
0xffffff80f4bfbe20 : 0xffffff7f84c293a9
0xffffff80f4bfbe70 : 0xffffff800449fe19
0xffffff80f4bfbf00 : 0xffffff8004498b6b
0xffffff80f4bfbf20 : 0xffffff800404a15a
0xffffff80f4bfbfb0 : 0xffffff80040d6aa7
      Kernel Extensions in backtrace:
         com.apple.iokit.IOUSBFamily(650.4.4)[972D3024-AF9C-3E09-A9EC-D9AB2A559B38]@0xff ffff7f84a5d000->0xffffff7f84abbfff
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f846ba000
         com.apple.driver.AppleUSBHub(650.4.4)[1229941E-4CB9-3F57-B0A6-4A0AD595025D]@0xf fffff7f84c24000->0xffffff7f84c3afff
            dependency: com.apple.iokit.IOUSBFamily(650.4.4)[972D3024-AF9C-3E09-A9EC-D9AB2A559B38]@0xff ffff7f84a5d000
         com.Ralink.driver.RT2870USBWirelessDriver(4.2.5)[EFF2AF46-F4BA-4385-137E-84630B 6FD95B]@0xffffff7f85994000->0xffffff7f85a2bfff
            dependency: com.apple.iokit.IONetworkingFamily(3.2)[1EAD69CB-6AB4-387F-94C4-8FAAFF28354C]@0 xffffff7f856fc000
            dependency: com.apple.iokit.IOUSBFamily(650.4.4)[972D3024-AF9C-3E09-A9EC-D9AB2A559B38]@0xff ffff7f84a5d000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:     0x0000000003e00000
Kernel text base: 0xffffff8004000000
System model name: MacBookPro10,2 (Mac-AFD8A9D944EA4843)
System uptime in nanoseconds: 6704494044889
last loaded kext at 4782368779468: com.apple.driver.AppleUSBCDC          4.2.1b2 (addr 0xffffff7f8559b000, size 20480)
last unloaded kext at 4972309781655: com.apple.driver.AppleUSBCDC          4.2.1b2 (addr 0xffffff7f8559b000, size 16384)
loaded kexts:
com.Ralink.driver.RT2870USBWirelessDriver          4.2.5
com.apple.driver.AudioAUUC          1.60
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.driver.AGPM          100.14.11
com.apple.driver.ApplePlatformEnabler          2.0.9d1
com.apple.driver.X86PlatformShim          1.0.0
com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.driver.AppleIntelHD4000Graphics          8.1.8
com.apple.driver.AppleHDA          2.5.2fc2
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleMikeyDriver          2.5.2fc2
com.apple.driver.AppleThunderboltIP          1.0.10
com.apple.driver.AppleBacklight          170.3.5
com.apple.driver.AirPort.Brcm4331          700.20.22
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.AppleSMCLMU          2.0.4d1
com.apple.driver.AppleHWAccess          1
com.apple.driver.AppleLPC          1.7.0
com.apple.driver.AppleIntelFramebufferCapri          8.1.8
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.driver.SMCMotionSensor          3.0.4d1
com.apple.driver.AppleUSBTCButtons          240.2
com.apple.driver.AppleUSBTCKeyboard          240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          35
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.4.0
com.apple.driver.AppleSDXC          1.4.0
com.apple.driver.AppleUSBHub          650.4.4
com.apple.driver.AppleAHCIPort          2.9.5
com.apple.driver.AppleUSBEHCI          650.4.1
com.apple.driver.AppleUSBXHCI          650.4.3
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          2.0
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
com.apple.nke.applicationfirewall          153
com.apple.security.quarantine          3
com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.iokit.IOSurface          91
com.apple.driver.DspFuncLib          2.5.2fc2
com.apple.vecLib.kext          1.0.0
com.apple.iokit.IOAudioFamily          1.9.4fc11
com.apple.kext.OSvKernDSPLib          1.14
com.apple.iokit.IOBluetoothFamily          4.2.0f6
com.apple.iokit.IO80211Family          600.34
com.apple.iokit.IONetworkingFamily          3.2
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.driver.AppleHDAController          2.5.2fc2
com.apple.iokit.IOHDAFamily          2.5.2fc2
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IONDRVSupport          2.3.6
com.apple.iokit.IOAcceleratorFamily2          98.7.1
com.apple.AppleGraphicsDeviceControl          3.4.12
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
com.apple.driver.X86PlatformPlugin          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.5.1d27
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.iokit.IOGraphicsFamily          2.3.6
com.apple.driver.AppleSMC          3.1.6d1
com.apple.driver.AppleThunderboltDPInAdapter          2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily          2.5.0
com.apple.driver.AppleThunderboltPCIDownAdapter          1.4.0
com.apple.driver.AppleUSBMultitouch          240.6
com.apple.iokit.IOUSBHIDDriver          650.4.4
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.driver.AppleUSBComposite          650.4.0
com.apple.driver.AppleThunderboltNHI          1.9.2
com.apple.iokit.IOThunderboltFamily          2.8.5
com.apple.iokit.IOUSBUserClient          650.4.4
com.apple.iokit.IOAHCIFamily          2.6.0
com.apple.iokit.IOUSBFamily          650.4.4
com.apple.driver.AppleEFINVRAM          2.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          278.10
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.AppleKeyStore          2
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.iokit.IOReportFamily          21
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.8
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
com.apple.kec.pthread          1
Model: MacBookPro10,2, BootROM MBP102.0106.B03, 2 processors, Intel Core i5, 2.5 GHz, 8 GB, SMC 2.6f59
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x10F), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Network Service: Thunderbolt Ethernet, Ethernet, en3
Serial ATA Device: APPLE SSD SM128E, 121,33 GB
USB Device: Hub
USB Device: 802.11 n WLAN
USB Device: FaceTime HD Camera (Built-in)
USB Device: USB Receiver
USB Device: Hub
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: MacBook Pro, Apple Inc., 23.4

The panic was caused by the Ralink device or its software. I suggest you disconnect the device, back up all data, and then remove the software according to the developer's instructions.

Album Shuffle Doesn't Work Properly When Albums Have The Same Name

I'm using the latest versions of iTunes 7.0.2 and 5.5G iPod v1.2.1, but this problem has existed in (as far as I know) all iPods to date. It certainly still continues to occur on the latest iPod.
Example of the problem: I have many Albums by different Artists. I listen to them on my iPod by using "Album Shuffle" which plays the contents of an album in sequential order, but successive albums in random order. This is good when it works. However, iTunes and iPod have a problem when more than 1 album has the same name. So, let's say you have 3 albums by 3 different groups (Band A, B, and C), all called "Greatest Hits". The expected behaviour is that "Greatest Hits by Band A will play tracks 1-10, then another random album, and then sometime later, the album "Greatest Hits" by Band C will play tracks 1-15. That would be good, but this does not happen. Here's what actually happens:
Some Album / Band X / Track 14
Some Album / Band X / Track 15
Some Album / Band X / Track 16
Greatest Hits / Band A / Track 1
Greatest Hits / Band B / Track 1
Greatest Hits / Band C / Track 1
Greatest Hits / Band B / Track 2
Greatest Hits / Band A / Track 2
Greatest Hits / Band C / Track 2
Greatest Hits / Band B / Track 3
Greatest Hits / Band C / Track 3
Greatest Hits / Band A / Track 3
... (until all "Greatest Hits" tracks by Bands A, B, and C have finished)
Another Album / Band Z / Track 1
Another Album / Band Z / Track 2
Another Album / Band Z / Track 3
As you can see, the iPod treats all 3 "Greatest Hits" as one humungous album. Now, until version 7, even iTunes appeared to be pretty confused about this, but with the latest version added the "Album Artist" tag (which I've applied correctly to all tracks in my Library), so that it can identify albums as separate entities properly, even if they have the same name. (This was necessary for Cover Flow to work.) Sadly, this logic has not made it to the iPod, and we still have the crazy playback situation above.
Since the first day I bought my first iPod back in 2002, I've always used Album Shuffle, and this has always been a problem. I was surprised to find that even the latest iPod still hasn't fixed this, even though iTunes seems to have. Apple, please could you fix this?
iPod 5.5G, iTunes 7.0.2 Mac OS X (10.4.8)
Power Mac G5 Dual 2.3 GHz Mac OS X (10.4.8)

BTW, I'm not looking for workarounds that involve renaming albums. What if I have 158 "Greatest Hits" albums?

MacBook Air (mid-2011) updated to EFI 2.9.1 - now password/trackpad doesn't work properly when trying to log in from sleep.

Hi, hopefully someone can help me with an issue I've had with my mid-2011 MacBook air.
It was running fine until I installed the 2.9.1 EFI update from the app store; I believe this fixes problems caused with the 2.9 update however since installing it I've now got a problem when trying to log in. This is what happens:
I close the lid or put it to sleep.
I open the lid and the login screen appears.
The trackpad is non-responsive and I am unable to enter my password as the keyboard is unresponsive.
I then set the machine to sleep, wait a few minutes and wake it up again - still unresponsive.
The only thing that works is to hold the power key down to shut it down and start it up afresh. This time I am able to move the cursor and enter my password.
Its was perfectly fine prior to the 2.9.1 update (and I've not installed anything else in the meantime) but since the 2.9.1 update the above login problem has happened.
This is my Macbook Air's system (10.9.4) info if its of any help to anyone:
     Model Name:    MacBook Air
     Model Identifier:    MacBookAir4,1
     Processor Name:    Intel Core i5
     Processor Speed:    1.6 GHz
     Number of Processors:    1
     Total Number of Cores:    2
     L2 Cache (per Core):    256 KB
     L3 Cache:    3 MB
     Memory:    4 GB
     Boot ROM Version:    MBA41.0077.B11
     SMC Version (system):    1.74f4
Anyone else had similar problems?

Hi Roj,
Since the update, I have a different problem (when the laptop is in sleeping mode, screen turned down, fan runs after a certain...)... Did not have time to contact support yet.
One member suggested me to visit: https://getsupport.apple.com/GetproductgroupList.action.
Hope it can help...
Luke

Gradient Maps doesn't work properly when editing a photo from Lightroom

When I open a file in photoshop to edit and apply a gradient map to the image, it works fine. However, when I open an image from Lightroom (right click image, EDIT IN Photoshop) and apply the exact same adjustment layer, NOTHING HAPPENS. It's the strangest thing and for the life of me, I can't figure out what I'm doing different! As far as I can tell, the only difference is that the image from Lightroom is in 16 bit ... but when I change it to 8, still nothing happens.
My process: I apply a pastel gradeient on top of the image (preset: brown, tan, beige) and choose the "Pin Light" blending mode. Normally (as in opening an image outside of Lightroom), this gives my picture the desired effect. But when I open the image from Lightroom and apply the exact same gradient map, nothing happens. If I shift the color within the selector in the map window, I can eventually get the gradient map to reveal itself and the picture to show different colors, but ONLY if I move the color selection to the more saturated end and away from where I actually need it to be.
My setup: I'm working on an iMac, OS X > Lightroom 5 > Photoshop CS5. I'm clicking on DNG pictures within Lightroom and then selecting EDIT IN Photoshop > then working within photoshop.
Any suggestions would greatly be appreciated! Thank you.

Why not keep things simple and create a shortcut on the user's machine that uses this target command:
\\SRV2\d$\dir1\subdir1\subdir2
Simply because dir and subdirs are no constants.
Just imagin you have a webpage that looks like this :
Proj. #   Custommer    directory    bunch-of-other-stuff
4538      Microsoft        \\SRV2\Big_contracts\US\2014\software   etc
4539      Nokia             \\SRV3\Prototypes\EU\2012\hardware      etc
4540      So-else          \\SRV3\Big_contracts\EU\2013\software etc
Instead of the full path you have a small folder icon (to save space). And clicking on this icon will bring you directly to said path.
It was extremely convenient, very user-friendly. And it has been working for over a decade, and today my users are frowning...
I think you are pushing psexec.exe beyond its limits.
No, it's working perfectly on Win XP. I just find it too sad that it no longer works on Win 7. I view this as a regression.
When you run it the way you do it you actually do open a further Explorer process but it remains invisible to you because it runs in the background.
No, the user does get a new explorer windows that pops to the foreground. The
only trouble is that it opens in "My Documents".
Of course I could (try and...) teach them to right-click, copy the link, paste it in an explorer and so on, but they are going to hate me.
Thank you

Tag-copying doesn't work properly when using "Edit in..."

Hi folks!
I make use of Nik-plugins a lot to finish off my pictures. That's why I often use the "Edit in..." context-menu for hand over my Lightroom images to the Nik software. Usually I have tagged my images before, so I expect the created TIFF-file to receive the same tagging. But somehow that's not what happens.
The situation: I'm working on images which are tagged with a certain keyword, i.e. only these images are shown (I clicked the right-arrow on the category to show exactly those images). I hand over the file to the plugin (edit in...). LR creates the TIFF-file. The selection of the image I've created the TIFF of disappears, no new image is selected. I edit the image in the Nik product and save it. Afterwards I cannot see the image in my LR category. I have to switch to the "All Photos" view, find it there, select it, uncheck (strange!?) the tagging for the image, recheck the tagging and then switch to that tag again.
Does anyone have the same problem? Does anyone have a solution? This really slows down my speed...
Regards,
Kopi

Hi folks!
I make use of Nik-plugins a lot to finish off my pictures. That's why I often use the "Edit in..." context-menu for hand over my Lightroom images to the Nik software. Usually I have tagged my images before, so I expect the created TIFF-file to receive the same tagging. But somehow that's not what happens.
The situation: I'm working on images which are tagged with a certain keyword, i.e. only these images are shown (I clicked the right-arrow on the category to show exactly those images). I hand over the file to the plugin (edit in...). LR creates the TIFF-file. The selection of the image I've created the TIFF of disappears, no new image is selected. I edit the image in the Nik product and save it. Afterwards I cannot see the image in my LR category. I have to switch to the "All Photos" view, find it there, select it, uncheck (strange!?) the tagging for the image, recheck the tagging and then switch to that tag again.
Does anyone have the same problem? Does anyone have a solution? This really slows down my speed...
Regards,
Kopi

Safari doesn't work properly with Ebay

Safari doesn't work properly when listing items on Ebay. Fix it.

Hi Occo
I would rather Apple updates Safari
Then tell Apple, this a user to user forum, although I don't think Apple will update just for your problem as hardly anybody is experiencing the same issue, just a couple on this troubleshooting forum.
this IS NOT A EBAY PROBLEM
Please don't use all caps, it is considered shouting. No this may well not be an ebay problem, but it is not a Safari issue either, it is an issue on your Safari and on your computer. Everyone I know has no trouble with ebay at all. In fact Safari 4.0.4 has made it even faster to log in and browse, buy etc.
id rather apple fixed their software
Again, tell Apple, not us, through the Apple feedback page or file a bug report. They will update Safari if and when they decide, but it will not be to fix what is not broken.
Im sure there would be similiar sites that arent compatible with safari
I agree, as stated before that some sites are just lazy in updating their coding, usually not the high traffic sites though. Other sites only update their code for Windows IE and forget the rest of the world. Firefox, Opera, Camino etc. also can't access some sites.
So in conclusion, try Safari and OSX maintenance and if that fails, then try an archive and install. Because there is nothing wrong with Safari 4.0.4 and ebay, or else this forum would be inundated with thousands upon thousands of users complaining and that is not the case.
Cheers and Good Luck

Satellite P500-127: microphone or sound doesn't work properly using skype

Hi Toshiba team,
Recently bought a new notebook.
However the microphone or sound driver (connexant pebble high definition ) doesn't work properly when using skype. Also read about this matter in various forums such as the skype forum.
People encountered similar problems such as:
We can usually talk for a bit longer than 20 seconds, however the call will drop at a random time between 1 and 15 minutes. The strange part is that sometimes the quality of the call is good, but more than often my friend can only hear *half of what I am saying* while I usually do not have a problem hearing what has been said. The video will work so my friend can see me talking but can simply not really hear what I am saying.
Before the drop the call will usually freeze for a couple of seconds and then skype sometimes crashes. We have tried talking together without the video, however the problem remains.
I also found a suggestion by the toshiba service, just to simply increase the volume under control panel etc, but it doesn't work either..
Can you please help me on this one?
Cannot use skype at all as it just to annoying for everyone I talk to.. Quality is just to poor!!
Many many thanks
+Message was edited: link has been removed - not allowed+

Hi
Every day I use Skype with the internal webcam, microphone and speakers but I didnt have any problems as yet.
In your case I would try updating the drivers. Therefore download the latest sound and webcam driver (microphone is a part of webcam). Both you can get here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
If your friend cant hear you, check also the settings for internal microphone. I have activated microphone boost in Windows sound settings so I could improve the microphone quality.
By the way: Do you use the latest version of Skype? With older Skype version I had also some problems on Windows 7. As far as I know only newest version is fully Windows 7 compatible.

I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly. Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again. Is there any solution?

I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly.
Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again without letting me take any action. Is there any solution?

Hey, There are afew things you can try.
- Simply turn your phone off and back on again
- Hold down your home button and your lock button and let goes as soon as the screen goes black (Phone will power down) - Then turn on your phone and hey presto!
- Back up your iPhone to your PC, then restore it..
this ones last cause I think you may have tried it already..
- Close all open applications
Hope this helps!
Kieran.

I imported videos from photo into iMovie when I set up iMovie (obvious mistake) and now iMovie doesn't work properly, nor can I move specific videos into a folder where I want them. How do I fix this?

I imported videos from photo into iMovie when I set up iMovie (obvious mistake) and now iMovie doesn't work properly, nor can I move specific videos into a folder where I want them. How do I fix this? I even tried deleting iMovie, bought a new copy and installed it, but the folder "iPhoto Videos" is still there and I can't get new clips loaded to iMovie, especially where I want them. Please help.

The iPhoto Videos do occasionally have problems. I've seen a lot of people write messages to this Discussion group describing similar problems. The only thing that seems to get around this problem is to pull the video clips out of iPhoto then import them directly into iMovie. Once the troubles with iPhoto Videos starts, I haven't yet seen anyone write back with something that they did to fix it.
The most difficult part of doing this is the movies in iPhoto might be a little difficult to track down. But you can create a smart alum that does that for you. Go to iPhoto > File Menu > New Smart Album:
Set the first pulldown menu to keyword, second to contains, then in the last box type Movie with a capital 'M'. Then click OK. This smart album more or less does as search of the whole iPhoto Library and only displays items that match your search tearm of "Movie" exactly. In that smart album then you can find the original Movies you want to move out of iPhoto and into iMovie, <CTRL> click on the Movie clip, then choose Reveal in Finder. That will jump you out of iPhoto temporarily and into the iPhoto Library folder. From there you can move that movie file to the desktop. Move all the clips you want, once they're all collected up go to iMovie and go to the File Menu > Import Files. Then point it to the desktop where you moved your video clips.
This will put all those videos into an Event folder in iMovie and bypass iPhoto Videos altogether.

I m using apple mac pc, when we start windows 7 , apple mouse doesn't work properly it take to much time to gain signals from the pc and many times it not work but when we use mac it moves fastly and works properly. please suggest me. thanks ravi

i m using apple mac pc, when we start windows 7 , apple mouse doesn't work properly it take to much time to gain signals from the pc and many times it not work but when we use mac it moves fastly and works properly. please suggest me.
thanks
ravi
<Email removed by Host>

sounds more like Bluetooth rather than moue, but w/o knowing w/o posting mac model type/year we... will... not... know... what you have
All computers are personal computers, a PC though is also "non-Apple" in common usage.
Mac also is platform and OS.
Very confused reading what you are trying to tell us.

My palm m105's touch screen doesn't work properly after a sync.

I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
My palm m105's touch screen doesn't work properly after a sync.
I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
Thanks in advance!
Post relates to: Palm m105
Post relates to: Palm m105

Maldoman578,
Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
EfrainM_VZW
Follow us on Twitter @VZWSupport

My touchscreen doesn't work properly when I'm on louspeaker

Similar Messages

Maybe you are looking for