My touchSmart tm2-2150us screen is not responding to my touch or pen

MY screen is not responding to my touch . i also get a Notification   "USB device not recognized" i try updating that USB and dosent work. wHAT can i do?

Okay, in that case you may try re-installing the chipset driver and the touch driver from the following links and check if the issue has been resolved. The following are the links:
Chipset driver:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-86107-1&cc=us&dlc=en&lc=en&...=
Touch driver:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-84031-1&cc=us&dlc=en&lc=en&...=
If the issue is not resolved, it would be better to complete a full system recovery after taking backup of all your data. Issues as such would also occur if there are driver conflicts and these can be resolved with the recovery.
However, as I had mentioned earlier, since you are receiving a "USB device not detected" error, there is a possibility that the hardware is malfunctioning. If recovery is also not resolving the issue then you may need to get the unit serviced at an authorized HP service provider.
I work for HP.

Similar Messages

  • My ipad is locked and it tells me to update my icloud but the screen is not responding to my touch?

    How do I get my screen unlocked so that I can update my ipad.  The screen is not responding to my touch, instead it is telling me... " This ipad hasnt been backed up in  12 weeks. Backups happen when this ipad is plugged in, locked and connnected to wi-fi".  Does this mean that I cant use this untill it is all done backing everything up? And how do I begin to use it since it says its locked?

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    After it boots up again, you will be able to use the iPad. You should backup the iPad like the message is telling you to do.

  • My phone freezes and the touch screen does not respond to my touch.

    My i-phone 4 has been freezing up on me as of late.  The buttons will still work but the touch screen does not respond to my touch.
    Is my phone hooped or can I do sometinhg to fix it?

    First thing to try is a reboot of your iPhone. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPhone restart. See if that fixes your problem.

  • My screen does not respond to any touch commands on new 4S

    The screen on my new 4S does not respond to swiping in order to configure.  In addition, when I try to turn it off, it will not respond to cancel or swiping.  I have tried to reset to no avail.  Is there something else to try?

    Try a reset:
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

  • My ipad screen is not responding to my touch

    I can charge my ipad and it will vibrate and i can also print screen so i know my ipad is turned on but i cant see the home page.
    It wont respond to my touch. Ive tried turning it off but it wont respond. Ive tried restarting it but it wont restart. Ive put it on charge and it will vibrate so i know its charging but i cant see anything on the homepage. Ive tried everything. Anyone got an idea on what i can do next. My ipad is a 3rd generation ipad. Please and thank you

    Nadiya321 wrote:
    . Ive tried everything.
    Have you tried this... Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414

  • My ipad is spamming touches in some place in screen and not respond to my touchs

    My ipad is spamming a fast touchs in one place in the screen and it really annoys
    but when i lock and unlock the device the touch disapper and it gets normal
    but after a while this touch spam begins .. Tried hard reboot. But useless ..

    Try some basic troubleshooting:
    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    (C) Setup as new (data will be lost if you do not have backup)
    Settings>General>Reset>Erase all content and settings

  • My Iphone 4s touchscreen is not working i keep restarting it and it will not work, the screen will not respond to my touch what do i do?

    i need help immediatly

    need more information, when you say not working, is it frozen, is it powered off and not comming on, "NOT WORKING" is not going to help us help you.

  • HT1430 hOW CAN i JUMP START MY IPAD MINI WHEN THE SCREEN DOES NOT RESPOND TO MY TOUCH.  tHE INSTRUCTIONS ON THE SUPPORT PAGE DOES NOT WORK EITHER

    Tried this any other suggestions?

    This did not solve anything.  It just added to my frustration.  I've only had this since Christmas and I was hard to get started aat first but then started working and now it seems stuck.

  • HT4623 My iPad mini's screen is not responding to any touch.

    Tonight when I turned on my iPad mini, it booted up like normal but the screen won't do anything when I touch it to unlock it or try to do anything else.  The buttons work but I can't do anything else.  Could it be because the operating system needs to be updated or could it be another related issue?

    Have you tried a soft-reset to see if it works ok after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • My screen will not respond to me touching it. And i cant turn it off to reset it, and i cant access it of my coputer when i plug it in because it has a password on it. what do i do?

    I have no idea what happen I just got on my ipad to face time with a friend and I lost my Wi-Fi signal then. My friend called me back on face time and I couldn’t use my Ipad and I don’t know what happened. And I looked it up online to see how to fix this I found an article on apple saying how to fix this problem. So I fallowed the directions and it told me to plug in my device and to restore the IoS software on the iTunes summary pane. Anyways long story short is that I can access my ipad to do this because I have a password on my ipad so I can do this reboot.
    So I am going to let my battery run down and see it that fixes the problem.
    Conclusion
    The main problem I am having is I cannot shut down my ipad because I can’t slide over the shutdown slide.
    And I can’t do the recovery software on iTunes because my ipad is locked. And this is my dilemma 

    First Try This...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy...
    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If you try these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • My ipod nano touch screen is not responding please help, and i tried to hold down the volume and power button but its still not working

    ipod nano touch screen is not responding to my touch and whenever i click on something it just shows up as a white box

    Have you double check to make sure VoiceOver and other accessibility features have not been turned on?  See this article for more information and assistance.
    iPod nano (6th generation): How to use VoiceOver
    B-rock

  • I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?

    I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?

    You need to use the right arrow on the remote to go all the way to the right. The submit button will be highlighted and you can then press select on the remote to proceed.

  • My touch screen is not responding, I have reset the phone, plugged into different charger and tried to update it to itunes but they will not connect because I cannot put my passcode in, HELP please!

    My touch screen is not responding, I have reset the phone, plugged into different charger and tried to update it to itunes but they will not connect because I cannot put my passcode in, HELP please!

    ME TOO.  NOW MY IPHONE 6 PLUS IS SAME LIKE YOU.
    iphone is diabled- connect to iTunes because i forget passcode.
    i cannot connect iTunes because it's always asking to enter passcode on iphone.
    So, i cannot make restore my iphone 6+. And then, I cann't erase "device" in icloud.
    My iphone is new. No icloud. didn't connect to itune backage.
    That's why I try to connect iTunes but it need to enter passcode.
    So, my iphone just keep "iphone is disbled-connect to iTunes".
    IPHONE 6 PLUS

  • IPad touch screen does not respond even after full restore and update

    I have an iPad 2 64 GB
    It has for a number of months intermittently stopped responding to any touch screen inputs. This issue began almost as soon as I opened the iPad for the first time. As it was happening very rarely and normally responded eventually, so I thought nothing of it.
    This week the iPad will not respond to any touch input at all (Home, On/Off, Volume and Mute buttons still respond). I have tried the hard reset process a number of times and still nothing.
    I backed up the device to my machine and applied the latest update 5.1.1 and still no response. I then did a factory reset and still nothing.
    I have never dropped or damaged my iPad in any way.
    Does anybody know of any ongoing issues with the touch screen or a solution to this problem?

    Thank you.
    I've already booked myself in to the Genius Bar this week.
    I suspect it is a hardware failure and more specifically a loose internal connection.

  • Feedback screen does not respond to input

    I have a probklem with the new Firefox 9 upgrade (none of the images are shown in my yahoo emails, they are all blocked. I have tried everything that has been suggested in the forums re Page Info, etc etc, but none of it has helped.)
    I tried to send a message about this problem to Mozilla via their Firefox Feedback screen using the option for those "not happy", but the screen does not respond at all to any input you type in. You can hit "Submit Feedback" as often as you like, but nothing happens!
    I am running XP Pro.

    Yes you can still try webOS doctor by holding the volume up and the power buttons while you connect your USB cable. Go to this following web site to get the webOS doctor and follow the steps on the web page.
    http://ws.hpwebos.com/webosdoctor/sorry.htm

Maybe you are looking for

  • Having problems installing Ovi player.

    This problem would not happen if I did not format my PC. After format using Vista SP2, I can't install my  Ovi Player but before the format it was fine. The installation starts normally but until half way the downloading process the status turns to f

  • Something is eating up my memory!

    Hi all, Last year, for no reason I could discern, all of my memory dissapeared. I have an 80gig G5 - so lots of space. I have no music, no films no nothing saved on it. I have run programmes to delete all foreign languages. I've done everything I can

  • Just sick to death of shared printing issues

    I have two printers connected to my G4 server upstairs. I have an iMac and an iBook. The iBook can print to the IP4000 printer no problem, but if I try and print to the IP3000 I get a message about I have selected the wrong paper size. I have not, ev

  • Concept of  Snapshot method in inventory

    Can anyone please help me understanding the concept of  Snapshot inventory loading in BW?? What is the technique used on a broad level?? I tried to read how to inventory pdf but, im not easily getting the essense of it.In that doc, market update meth

  • Activatate second local currency(Group currency)

    hi Experts , I am going to activate activate second local currency(Group currency) on the current company [ which i close 2 years on it ] i face serious problem to evaluate the amount has been entered for the previous year is there any to way to eval