My trackpad is not working! Please help!
Hello! So I bought a trackpad not to long ago, and I needed to replace the batteries. So I did. I put the batteries in the correct way and everything. I don't know if it was the batteries or what but when I tried to press the on button, nothing was happing. The trackpad will not turn on. I'm starting to think I broke it.. i tried replacing the batteries with another set of new batteries, but that hasnt help. I don't know whats going on. The trackpad will not turn on, no matter how long i press the on button. I'm geeting really stressed. I payed like $100 for this thing, and it wont even turn on even when I put new batteries in it. Please help me!
Holding the power button turns it off. Just tap the power button once, wait a minute and then do a physical click. It should connect.
Similar Messages
-
The click at touchpad is not working, please help!!!
I use Macpro, recently the click at touchpad is not working, please help!!! Thank you !!
For this issue AppleCare support told me to so a SMC reset as follows:
Power the machine OFF.
At the SAME TIME hold down the following buttons:
Shift
Control
Option
Power
Then release all buttons. Power up the Macbook and see if the trackpad button work.
Hope this helps.
Bill -
my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.
Sounds like it may be a hardware issue.
Please contact Apple Support in your country.
Here is a list of numbers: http://support.apple.com/kb/HE57
Regards
J -
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
-
I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.
I live in South Africa, and I had the same problem with my iPhone 4.
After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
***** that i cant use Find my iPhone, but atleast i can use my phone. -
I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .
If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp -
this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
is there any other method to download ios 6.1.2.
my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
kindly help.
thankswell in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone. -
while updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me
I would imagine your iPhone was hacked to make it work on your local carrier.
Updating the iOs to 5.xx will lock it back to the original carrier .The carrier holding the lock are the only
entity able to authorise the unlock .You will have to contact them and see if they unlock and the terms the apply -
HT1414 my handsfree is not working please help me
Hi There!
I am using Iphone 4s and ny handsfree in not working please help meTry restarting you iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo.
-
I have ne iphone 5, i been setting my email using AT&T global but it is not working, please help me on the correct configuration
Contact the email provider and obtain the correct setup information.
-
The built-in mic in g50 122ca laptop model is not working. please help me out.
the built-in mic in g50 122ca laptop model is not working. please help me out. OS: Windows Vista (32-bit)
here is a sample code .
so far you procedure looks good but
i bet you have to specify the name of report , instead of 'filename'.
see this
Plist_id := GET_PARAMETER_LIST('P_name');
IF NOT ID_NULL(Plist_id) THEN
DESTROY_PARAMETER_LIST(Plist_id);
END IF;
Plist_id := CREATE_PARAMETER_LIST('P_name');
ADD_PARAMETER( Plist_id, 'P_Receive_date', TEXT_PARAMETER, TO_CHAR(Receive_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_date', TEXT_PARAMETER, TO_CHAR(Hearing_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_time', TEXT_PARAMETER, TO_CHAR(Hearing_time,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Issue_date', TEXT_PARAMETER, TO_CHAR(Issue_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Workshop_date', TEXT_PARAMETER, TO_CHAR(Workshop_date,'mm/dd/yyyy'));
-- RUN_PRODCT(REPORTS,'..\Reports\Pro_License',SYNCHRONOUS, RUNTIME, FILESYSTEM, Plist_id, NULL);
-- here Pro_License is the name of report.
did you tried to see if the parameter passed using a message ?
try
message('parameter name'); pause; write this before "run_report". -
my itnues for pc is not working it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me
Please helppppp
-
All my old tv shows are not working please help my computer sed I have to Atheris 5 computers to play all my old tv shows I Pade for with eney Itunas cards.
What do y mean by not work?
What happens when y try to play them on yur iPod?
What happens when yo try to play them in iTunes on yur computer?
If you get a message what is the exact wording of the message?
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Some countries do not allow redownloads some kinds of media -
hi
i tried to update to ios 8.2 on my iphone 5s when message popup to me now my iphone not working, please help i dont want to lose my dataWhat is the exact text of the message you got? And did you not back up before you updated?
-
After I updated my new Ipad with IOS 6, now Map& Dictation icon are not working. please help me
Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?
-
Whenever I go to facetime on my macbook air it says call failed. Both my WiFi and Facetime are connected. I tried turning my Facetime on, and off,yet it still does not work. please help.
Hey Ekfree95,
Thanks for the question, and great troubleshooting so far. The following article provides additional steps that may have to resolve your issue:
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/TS4185
Thanks,
Matt M.
Maybe you are looking for
-
How do i send a rented movie from my computer to apple tv?
I rented a movie from iTunes on my computer, but I want to watch it on my Apple TV. The rental shows up in my "rentals" category on my computer, and is finished downloading. The Apple TV is linked to the same Apple ID as my computer, and Home Sharing
-
RSA1 - Source system connection : Change in logical system name
Dear friends, Can you please tell me how can i change the logical system name for a source system connection. There is no change in source system & source system connection check works well, just we have decided that from current logical system name
-
Authorization issue after upgrade
Hi Everyone, We just upgraded from BI 3.5 to BI 7 last week. At the moment, there is an issue with Information Broadcaster now, all the information broadcaster settings are created by different business units general account (Eg. BW_unitA, BW_unitB,
-
Update Operation to SAP Failed using BDC Model
Hi All, I am working in Duet Enterprise 1.0 development in SharePoint. At SAP front Query, Read and Update operations have been developed and the corresponding WSDL and Endpoint URLs are generated. I need to use these WSDL and Endpoint urls and perfo
-
This is my second project of all stills - about a 100 in each project. I have them in the timeline with a transition on each. The still duration is 5 seconds. I have one issue - There is a slight nudge to the image as it goes from transition to full