My transitions only apply's to the right video

Hi there,
I have a problem with my video transitions.
When I try to add a transition to both video's only the right video is getting the transition.
See the video please.
Hope somebody can help me.
Thanks!
Bertus

If one of the clips is not trimmed you cannot place the transition centre at cut, it will set itsself start/end of cut.
In your case you need to trim the right clip.
See this doc: it's all about handles.
http://help.adobe.com/en_US/premierepro/cs/using/WSE2A9B838-1422-4d8a-9A03-CFDF4332533B.ht ml#WS94AAD4E0-6BA0-49da-83BB-FE9E101A8BF2

Similar Messages

I have the Ipod touch and only can hear out the right ear bud

I have tried numerous ear buds, even when listing to ipod in car, via a cassette adaptor plugged into ipod touch - can only hear out of the right speak.
I even took back my initial ipod thinking it was defect, but it is happening on this new one as well - any thoughts please? thank you

Sounds like the headphone jack in the iPod is defective and needs replacement. Have you tried cleaning the jack?
Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
A third-party place like the following is less expenisve. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Sound only comes out from the right ear/head phone. :((

My iTouch was working perfectly fine til it was connected to the school speaker for my dance. When I used it afterwards (with my headphones), the sound only came out from the right phone. I tried using my spare earphones and still no sound from the left. The headphones/earphones are working fine as I tested it with my laptop and mom's iPhone. So the real problem's with my iTouch!
What do I do? I tried syncing it to iTunes, even resetting it... but nothing! HELP. :((

If you connect your iPod with your computer, and if you can hear from both channels, that it is clearly something wrong with the earphone jack, there are few cases reported the dust in the earphone (metal parts?) causing the problem.

Audio out jack only plays sound in the right speaker.

Whenever I plug anything (speakers, earphones, etc.) into the Audio Output jack, it only plays sound through the right speaker/earphone. The left speaker/earphone hardly has any sound at all.
How should I go about fixing this problem?
It ***** and it's annoying. At first, I thought it was just my earphones but they work perfectly fine with my iPod and other devices.

HI Chris,
my daughter has the ipod touch 4th generation and it started only having sound come out of the right speakers in both of my vehicles. I read also it could be a broken socket causing it. Do you know about this? How does one break a socket and how would I repair that? The person on y*hoo answers said to either send it to apple refurbished unit or replace it. Replace it? Really? It's a 64 GB ipod touch that I won at work with reward points which is the only reason I could afford it. Looking for better solution like your's above but I'm worried I will have to send it in. I was looking on my iphone 4 and noticed the volume balance was under Settings>General>Accessibility so I guess it's different on an ipod touch?

Only getting sound out the right side speaker

Just this morning, I realised that I am only getting sound out the right side (built-in) speaker on my iMac 24 inch.
Any ideas as to why/how this is happening. It was working fine last night.
Do I have to take it in for repair??

thanks- yes that was the answer!
god knows how i altered the setting. must have been a keyboard short-cut and i did it by mistake...!

Ipod touch shows up under devices on the left in itunes, but only shows "ipod" to the right

I have an ipod touch 4th generation 64 gb. I connected to iTunes using usb cord. normally, the device shows up in the left hand column of itunes. then on the right, you have the ipod info - summary- music- apps, etc. however, the only thing i get on the right is just the word "ipod" nothing else. no links or tabs or even a sync button. please help

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

IPod Classic 80GB will only play music through the right earphone

Hi everybody
a few days ago my ipod stopped playing music through both earphones and will now only play through the right one. it isn't the headphones because i brought a new set and used another set that i know work through both earphones but neither will work through both earphones on my ipod. This problem is really annoying me. I tried resetting it but nothing. I didn't do anything to it, i just didn't use it for a few days. and i really want to avoid restoring it to factory settings because it is almost full and only a handful of my songs are on my computer. any solutions?

Yeah I now know that after finding it in another thread. Thanks anyway. I live in Australia so I just gotta find someone who will repair it because I don't wanna risk ruining it by trying to do it myself. I asked an electronics place that replaces the batteries but they wouldn't do it. So if I can't find anybody to fix it, I'll probably buy a new one (cos I need one anyway) and try to fix the old one. The problem with finding someone to fix it is that I live in a country town and about 2-3 hours from Sydney and we don't have much here.

Why Does my sound only play out of the right ear when my headphones are fine

my headphones were working fine last night but this morning when I went to listen to music they would only work out of right ear. If anyone knows the solution to this please let me know

You don't have to post this more than once.
Let's continue to conversation where it started -- https://discussions.apple.com/thread/6748843

Audio only comes out of the right head phone on my iPhone 4?

I've just bought an iPhone 4 16GB off a family friend and the phone was in fully working order, I've seen it and used it. It's been restored back to factory default and now audio only comes out of 1 head phone through the audio jack? I've checked inside the jack for anything in there and I've used 4-5 pairs of head phones I know are working having used them in other devices. I've used this phone in the past with the head phones so I know it does work. I've tried doing a reset, same problem still occurs. Any idea's at all?

- Try cleaning out/blowing out the headphone jack.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. If not under warranty Apple will exchange your iPhone for a refurbished one for:
iPhone model
Out-of-Warranty Service
iPhone 5
$229
iPhone 4S
$199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone
$149
Apple Retail Store - Genius Bar
There are third-party places that will replae the jack for less. Here is one.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Use bluetooth headphones instead.

Is E17 the only WM/DE with the *right* Xinerama support?

Hi everybody,
I'd like to ask if you know of any other WM/DE that is capable of managing different virtual desktops (aka workspaces, pagers, etc.) on different monitors like E17 does.
For those that didn't try E17 with Xinerama, E17 lets you have a pager on each monitor and when you change virtual desktop on a particular monitor the content of the other monitor(s) won't get affected.
Before trying E17 I was using Gnome running on two different displays i.e. without Xinerama, but I want to be able to move windows from a monitor to another (and keep the two monitor separated and not have them treated as one big monitor).
Hope this makes sense, and sorry for my bad English!
Thanks in advance, Proc.

Hide wrote:I know that dwm is optimized for dual-monitor usage, but i'm not sure if that's the thing you're looking for.
actually dwm is not optimized for dual monitor usage, and specifically states that it does not support xinerama
you may confused with another wm
right now im using XMonad because it supports xinerama quite well.
Though I would like to get Awesome working better, i'm having trouble working it on my xinerama setup. (using twinview)

Why am i only hearing out of the right headphone

I have checked in System Prefs and the balance is centered for headphones output.
This problem occurs with multiple (i.e. all) headhpones.

Could be the contacts inside the stereo port are no longer making good contact.
Try rubbing alcohol on the male plugs to clean the oils off and inside the port contacts.
Sometimes the stereo mini plugs are not the full size, and a female to male adapter might work to make better contact.

Shuffle (2nd Gen) Will only play music through the right headphone

Hi all
the reason I have a 2nd Gen was ebcause my original Shuffle had the same problem, then wouldnt play through either unless I HELD the phones in the plug..
Now my new shuffle (2nd Generation) has the early signs of this problem. It will not play music through the left earphone at all (Ive tried 3 pairs, its not the phones)..
My shuffle was purchase december sometime but I dont think I registered it when I installed Itunes.
Still have recept if that helps?
Thanks
Spike
Pre-designed Windows XP 512 Ram

Hi all
the reason I have a 2nd Gen was ebcause my original
Shuffle had the same problem, then wouldnt play
through either unless I HELD the phones in the
plug..
Now my new shuffle (2nd Generation) has the early
signs of this problem. It will not play music through
the left earphone at all (Ive tried 3 pairs, its not
the phones)..
My shuffle was purchase december sometime but I dont
think I registered it when I installed Itunes.
Still have recept if that helps?
Get a replacement soonest.

Locked - Tips for Choosing the Right Video and DVD Converter

Spam content removed by moderator.

They are ALL 7200 RPM. I wouldn't suggest anything less.
I need something with 7200 RPMS +RAID Protection
For $600? Not gonna get more than RAID 1, and that isn't recommended for video editing...not really fast enough for anything other than DV. Of the ones I mentioned, only the Caldigit VR is capable of Raid 1. For hardware Raid 5 you need at least 3 drives (internally on a Mac Pro with a Caldigit Raid card, or Apple Raid card, for example)...or a 4-5 drive enclosure with eSATA or miniSAS connection. Can't be had for under $1000. Looking at least at $2000.
That Promise SmartStor...that's for DATA, not VIDEO. Software RAIDs aren't reliable for video. In my experience. But get what you want.
Shane

Why is some of my music only showing up in the my video playlists?

There are a number of songs that are only appearing in the playlists under 'Video.' And they aren't appearing in my main music library at all. I mean they still play and everything, but I'm a complete organization freak. And this is driving me up the wall.
Not to mention, the TV shows that I've purchased, keep deleting everytime I plug my iPod in. And I have to manually resync those on to it everytime. Is that normal?

In your sync boxes for TV shows have you checked the box for remove after viewing and/or don't sync after viewing?

Choosing the right video conversion software

I am pretty sure this topic has been discussed with interesting comparative analyses, but could not find it.
If it exists, can someone be kind enough to show me the thread?
If it does not exist, then may I expose my problem:
I am normally exporting my video clips (from XDCAM-EX-HD) into Quicktime Movie using the XDCAM-EX 1080p30 Compressor in my sequence setting, to burn a Blu-Ray. So far it works fine.
But I also want to export them in a format to be read in Full HD by Sony PS3. The only format I found which works is HD for Apple TV which is only 720p and the picture is of much lower quality than from the Blu-Ray.
I would like therefore a software which could convert the .mov file into a DVIX or MP4 file in 1080p resolution which can be read by the PS3.
Which is these numerous conversion software can do it?

This thingy...which is a pack of presets for Compressor...has one for PS3.
CRAM 1.0
Shane

My transitions only apply's to the right video

Similar Messages

Maybe you are looking for