My trash takes too long or doesn't empty at all.

I've tried the terminal option. I have trash preferences set to Secure Empty Trash everytime I empty the trash.
I updated to Mountain Lion two weeks ago, and I've been having trouble with my trash quickly emptying like it used to.
SHORT VERISON: I'm deleted shows, movies, documents, and photos (over 5,000) from my external 1TB drive. The progress bar moves slowly or not at all (I keep force quitting because it takes over three hours to delete a few files).
LONG VERSION: I have no backup of my laptop. Time Machine used to backup my laptop to this external, but it stopped deleting older version, so I had to manually delete the oldest version tonight (the only version for some reason, it doesn't show any others) to get it to try and back up, but then it said it was going to take 11 DAYS to do the backup, and I'm pretty sure I don't have enough room anyway, I even tried excluding huge files that I would be fine with losing.
So I decided to go through and delete a bunch of things on external to free up space, (and trust me, it will free up A TON of space... if they ever delete), but (and I've been experimenting) Finder can take anywhere from fifteen minutes to delete a single half hour episode, to never deleteing it at all.
I also can't move things to my laptop because I'm trying to free up space there too. I got a video camera and didn't realize that I'd downloaded over 110gigs of videos from my new camera. So I have no room on my laptop, but that won't delete it from the external anyway, it'll copy it I think.
I need to get this multitude of large and small files off my external before I can backup my laptop. But.... I can't do it! I have no idea what's wrong! It's driving me crazy. Normally some extreme form of emptying the trash worked in the past, but not now... nothing is speeding this up, or working at all.

I got to the Trash It! Link and tried that. It worked! I still don't know why Finder was acting up like that. But I'm glad to have all of this space (I also thought I would let Time Machine run for a bit while trying to figure this out, and it was up the 42 days as the estimated time).
THANK YOU! Thank you so much! I'm bookmarking that link for future reference.

Similar Messages

Sometimes my computer takes too long to connect to new website. I am running a pretty powerful work program at same time, what is the best solution? Upgrading speed from cable network, is it a hard drive issue? do I need to "clean out" the computer?

Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy. It is a Macbook Pro osx 10.6.8 (late 2010).

Almost certainly none of the above! Try each of the following in this order:
Select 'Reset Safari' from the Safari menu.
Close down Safari; move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false

AME CS6 rendering with AE and Pr takes too long

Hi Guys,
Need some help here. i have rendered a 30 secs mp4 video with 1920 x 1080 HD format 25 frames w/o scripting in AME for 4 hours!
Why does it take too long? I have rendered a 2 minute video with same format w/ scripting but only spare less than 30 minutes for rendering.
Im using After Effects and Premium Pro both CS6 and using Dynamic Link in AME.
What seems to be wrong in my current settings?
Any help would be appreciated.
Thanks!

This may be a waste of time, but it won't take a minute and is something you should always do whenever things go strangely wrong ............ trash the preferences, assuming you haven't done it already.
Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that only FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.
There is absolutely no danger in trashing preferences and you can do it as often as you like.
The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones . . . instantly.

Update statement takes too long to run

Hello,
I am running this simple update statement, but it takes too long to run. It was running for 16 hours and then I cancelled it. It was not even finished. The destination table that I am updating has 2.6 million records, but I am only updating 206K records. If add ROWNUM <20 to the update statement works just fine and updates the right column with the right information. Do you have any ideas what could be wrong in my update statement? I am also using a DB link since CAP.ESS_LOOKUP table resides in different db from the destination table. We are running 11g Oracle Db.
UPDATE DEV_OCS.DOCMETA IPM
SET IPM.XIPM_APP_2_17 = (SELECT DISTINCT LKP.DOC_STATUS
FROM [email protected] LKP
WHERE LKP.DOC_NUM = IPM.XIPM_APP_2_1 AND
IPM.XIPMSYS_APP_ID = 2
WHERE
IPM.XIPMSYS_APP_ID = 2;
Thanks,
Ilya

matthew_morris wrote:
In the first SQL, the SELECT against the remote table was a correlated subquery. the 'WHERE LKP.DOC_NUM = IPM.XIPM_APP_2_1 AND IPM.XIPMSYS_APP_ID = 2" means that the subquery had to run once for each row of DEV_OCS.DOCMETA being evaluated. This might have meant thousands of iterations, meaning a great deal of network traffic (not to mention each performing a DISTINCT operation). Queries where the data is split between two or more databases are much more expensive than queries using only tables in a single database.Sorry to disappoint you again, but with clause by itself doesn't prevent from "subquery had to run once for each row of DEV_OCS.DOCMETA being evaluated". For example:
{code}
SQL> set linesize 132
SQL> explain plan for
2 update emp e
3 set deptno = (select t.deptno from dept@sol10 t where e.deptno = t.deptno)
4 /
Explained.
SQL> @?\rdbms\admin\utlxpls
PLAN_TABLE_OUTPUT
Plan hash value: 3247731149
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Inst |IN-OUT|
| 0 | UPDATE STATEMENT | | 14 | 42 | 17 (83)| 00:00:01 | | |
| 1 | UPDATE | EMP | | | | | | |
| 2 | TABLE ACCESS FULL| EMP | 14 | 42 | 3 (0)| 00:00:01 | | |
| 3 | REMOTE | DEPT | 1 | 13 | 0 (0)| 00:00:01 | SOL10 | R->S |
PLAN_TABLE_OUTPUT
Remote SQL Information (identified by operation id):
3 - SELECT "DEPTNO" FROM "DEPT" "T" WHERE "DEPTNO"=:1 (accessing 'SOL10' )
16 rows selected.
SQL> explain plan for
2 update emp e
3 set deptno = (with t as (select * from dept@sol10) select t.deptno from t where e.deptno = t.deptno)
4 /
Explained.
SQL> @?\rdbms\admin\utlxpls
PLAN_TABLE_OUTPUT
Plan hash value: 3247731149
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Inst |IN-OUT|
| 0 | UPDATE STATEMENT | | 14 | 42 | 17 (83)| 00:00:01 | | |
| 1 | UPDATE | EMP | | | | | | |
| 2 | TABLE ACCESS FULL| EMP | 14 | 42 | 3 (0)| 00:00:01 | | |
| 3 | REMOTE | DEPT | 1 | 13 | 0 (0)| 00:00:01 | SOL10 | R->S |
PLAN_TABLE_OUTPUT
Remote SQL Information (identified by operation id):
3 - SELECT "DEPTNO" FROM "DEPT" "DEPT" WHERE "DEPTNO"=:1 (accessing 'SOL10' )
16 rows selected.
SQL>
{code}
As you can see, WITH clause by itself guaranties nothing. We must force optimizer to materialize it:
{code}
SQL> explain plan for
2 update emp e
3 set deptno = (with t as (select /*+ materialize */ * from dept@sol10) select t.deptno from t where e.deptno = t.deptno
4 /
Explained.
SQL> @?\rdbms\admin\utlxpls
PLAN_TABLE_OUTPUT
Plan hash value: 3568118945
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Inst |IN-OUT|
| 0 | UPDATE STATEMENT | | 14 | 42 | 87 (17)| 00:00:02 | | |
| 1 | UPDATE | EMP | | | | | | |
| 2 | TABLE ACCESS FULL | EMP | 14 | 42 | 3 (0)| 00:00:01 | | |
| 3 | TEMP TABLE TRANSFORMATION | | | | | | | |
| 4 | LOAD AS SELECT | SYS_TEMP_0FD9D6603_1CEEEBC | | | | | | |
| 5 | REMOTE | DEPT | 4 | 80 | 3 (0)| 00:00:01 | SOL10 | R->S |
PLAN_TABLE_OUTPUT
|* 6 | VIEW | | 4 | 52 | 2 (0)| 00:00:01 | | |
| 7 | TABLE ACCESS FULL | SYS_TEMP_0FD9D6603_1CEEEBC | 4 | 80 | 2 (0)| 00:00:01 | | |
Predicate Information (identified by operation id):
6 - filter("T"."DEPTNO"=:B1)
Remote SQL Information (identified by operation id):
PLAN_TABLE_OUTPUT
5 - SELECT "DEPTNO","DNAME","LOC" FROM "DEPT" "DEPT" (accessing 'SOL10' )
25 rows selected.
SQL>
{code}
I do know hint materialize is not documented, but I don't know any other way besides splitting statement in two to materialize it.
SY.

HT4352 apple tv takes too long to load photos

I am running iTunes (11.1.5.5) on Windows 7 and have setup home sharing and accessing the Photo Library from Apple TV 3rd Generation.
We have a lots of photos (approx 21000) organizaed in folders, eg:
Main Photo Folder
Folder 1 (5500 photos)
F1-Sub 1
F1-Sub 2
F1-Sub 3
Folder 2 (3500 photos)
F1-Sub 1
F1-Sub 2
F1-Sub 3
Folder 3 (12000 photos)
F1-Sub 1
F1-Sub 2
F1-Sub 3
Apple TV doesn't show the sub-folders beyond the first set of folders and as a result it takes too long to load our list of photos, is there anything that can be done to fix this?
Thanks!

I am having exactly the same issue. Moved house and now starting a movie takes minutes, not seconds... I've got both the Mac and ATV connected via ethernet to my Airport Extreme base station, but have no explanation for this bizarre slowdown. I also don't have internet currently, but I can't understand with content not purchased on iTunes, why that would make any difference...?

HT1338 audio midi initializing takes too long

I am having trouble with midisport 4x4 installation and setup. My Cubase 6 (and even garageband) take too long to initialize audio midi setup and finally don't succeed.As a result midisport 4x4 don't work. Even when it does there is notable latency.My audio interface is DIGIDESIGN 003 Rack. I've tried Avid MBOX PRO also. Problem remain the same.

Hi Brad,
Thank you for your quick response. I am sorry that I couldn't upload the file, and it also has some VI involved with as well, so I don't know if I can do it.
Since it doesn't work when I add 2 inspections to one, I decide go with the Select Inspection Function now; and it seems working well and doesn't take much time to load each of the inspection.
Thanks.

Accessing BKPF table takes too long

Hi,
Is there another way to have a faster and more optimized sql query that will access the table BKPF? Or other smaller tables that contain the same data?
I'm using this:
   select bukrs gjahr belnr budat blart
   into corresponding fields of table i_bkpf
   from bkpf
   where bukrs eq pa_bukrs
   and gjahr eq pa_gjahr
   and blart in so_DocTypes
   and monat in so_monat.
The report is taking too long and is eating up a lot of resources.
Any helpful advice is highly appreciated. Thanks!

Hi max,
I also tried using BUDAT in the where clause of my sql statement, but even that takes too long.
    select bukrs gjahr belnr budat blart monat
     appending corresponding fields of table i_bkpf
     from bkpf
     where bukrs eq pa_bukrs
     and gjahr eq pa_gjahr
     and blart in so_DocTypes
     and budat in so_budat.
I also tried accessing the table per day, but it didn't worked too...
   while so_budat-low le so_budat-high.
     select bukrs gjahr belnr budat blart monat
     appending corresponding fields of table i_bkpf
     from bkpf
     where bukrs eq pa_bukrs
     and gjahr eq pa_gjahr
     and blart in so_DocTypes
     and budat eq so_budat-low.
     so_budat-low = so_budat-low + 1.
   endwhile.
I think our BKPF tables contains a very large set of data. Is there any other table besides BKPF where we could get all accounting document numbers in a given period?

Report Takes Too Long Time

Hi!
I am in troubble
following is the query
SELECT inv_no, inv_name, inv_desc, i.cat_id, cat_name, i.sub_cat_id,
sub_cat_name, asset_cost, del_date, i.bl_id, gen_desc bl_desc, p.prvcode, prvdesc, cur_loc,
pldesc, i.pmempno, pmname, i.empid, empname
FROM inv_reg i,
cat_reg c,
sub_cat_reg s,
gen_desc_reg g,
ploc p,
province r,
pmaster m,
iemp_reg e
WHERE i.sub_cat_id = s.sub_cat_id
AND i.cat_id = s.cat_id
AND s.cat_id = c.cat_id
AND i.bl_id = g.gen_id
AND i.cur_loc = p.plcode
AND p.prvcode = r.prvcode
AND i.pmempno = m.pmempno(+)
AND i.empid = e.empid(+)
&wc
order by prvdesc, pldesc, cat_name, sub_cat_name, inv_no
and this query returns 32000 records
when i run this query on reports 10g
then it takes 10 to 20 minuts to generate report
how can i optimize it...?

Hi Waqas Attari
Pls study & try this ....
When your query takes too long ...
hope it helps....
Regards,
Abdetu...

OPM process execution process parameters takes too long time to complete

PROCESS_PARAMETERS are inserted every 15 min. using gme_api_pub packages. some times it takes too long time to complete the batch ,ie completion of request. it takes about 5-6 hrs long time ,in other time s it takes only 15-20 mins.This happens at regular interval...if anybody can guide me I will be thankful to him/her..
thanks in advance.
regds,
Shailesh

Generally the slowest part of the process is in the extraction itself...
Check in your source system and see how long the processes are taking, if there are delays, locks or dumps in the database... If your source is R/3 or ECC transactions like SM37, SM21, ST22 can help monitor this activity...
Consider running less processes in parallel if you have too many and see some delays in jobs... Also indexing some of the tables in the source system to expedite the extraction, make sure there are no heavy processes or interfaces running in the source system at the same time you're trying to load... Check with your Basis guys for activity peaks and plan accordingly...
In BW also check in your SM21 for database errors or delays...
Just some ideas...

Web application deployment takes too long?

Hi All,
We have a wls 10.3.5 clustering environment with one admin server and two managered servers separately. When we try to deploy a sizable web application, it takes about 1 hour to finish. It seems that it takes too long to finish the deployment. Here is the output from one of two managerd server system log. Could anyone tell me it is normal or not? If not, how can I improve this?
Thanks in advance,
John
+####<Feb 29, 2012 12:11:03 PM EST> <Info> <Deployer> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330535463373> <BEA-149059> <Module copyrequest of application copyrequest [Version=COPYREQUEST0002bb] is transitioning from STATE_NEW to STATE_PREPARED on server Pinellas1tMS3.>+
+####<Feb 29, 2012 12:11:05 PM EST> <Info> <Deployer> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <9baa7a67b5727417:26f76f6c:135ca05cff2:-8000-00000000000000b0> <1330535465664> <BEA-149060> <Module copyrequest of application copyrequest [Version=COPYREQUEST0002bb] successfully transitioned from STATE_NEW to STATE_PREPARED on server Pinellas1tMS3.>+
+####<Feb 29, 2012 12:11:06 PM EST> <Info> <Deployer> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330535466493> <BEA-149059> <Module copyrequest of application copyrequest [Version=COPYREQUEST0002bb] is transitioning from STATE_PREPARED to STATE_ADMIN on server Pinellas1tMS3.>+
+####<Feb 29, 2012 12:11:06 PM EST> <Info> <Deployer> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330535466493> <BEA-149060> <Module copyrequest of application copyrequest [Version=COPYREQUEST0002bb] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server Pinellas1tMS3.>+
+####<Feb 29, 2012 12:11:06 PM EST> <Info> <Deployer> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330535466809> <BEA-149059> <Module copyrequest of application copyrequest [Version=COPYREQUEST0002bb] is transitioning from STATE_ADMIN to STATE_ACTIVE on server Pinellas1tMS3.>+
+####<Feb 29, 2012 12:11:06 PM EST> <Info> <Deployer> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330535466809> <BEA-149060> <Module copyrequest of application copyrequest [Version=COPYREQUEST0002bb] successfully transitioned from STATE_ADMIN to STATE_ACTIVE on server Pinellas1tMS3.>+
+####<Feb 29, 2012 1:00:42 PM EST> <Info> <Diagnostics> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330538442300> <BEA-320143> <Scheduled 1 data retirement tasks as per configuration.>+
+####<Feb 29, 2012 1:00:42 PM EST> <Info> <Diagnostics> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330538442301> <BEA-320144> <Size based data retirement operation started on archive HarvestedDataArchive>+
+####<Feb 29, 2012 1:00:42 PM EST> <Info> <Diagnostics> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330538442301> <BEA-320145> <Size based data retirement operation completed on archive HarvestedDataArchive. Retired 0 records in 0 ms.>+
+####<Feb 29, 2012 1:00:42 PM EST> <Info> <Diagnostics> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330538442301> <BEA-320144> <Size based data retirement operation started on archive EventsDataArchive>+
+####<Feb 29, 2012 1:00:42 PM EST> <Info> <Diagnostics> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330538442301> <BEA-320145> <Size based data retirement operation completed on archive EventsDataArchive. Retired 0 records in 0 ms.>+
+####<Feb 29, 2012 1:10:23 PM EST> <Info> <Cluster> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <weblogic.cluster.MessageReceiver> <<WLS Kernel>> <> <> <1330539023098> <BEA-003107> <Lost 2 unicast message(s).>+
+####<Feb 29, 2012 1:10:36 PM EST> <Info> <Cluster> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330539036105> <BEA-000111> <Adding Pinellas1tMS2 with ID -9071779833610528123S:entwl2t-vm:[7005,7005,-1,-1,-1,-1,-1]:entwl2t-vm:7005,entwl3t-vm:7007:Pinellas1tDomain:Pinellas1tMS2 to cluster: Pinellas1tCluster1 view.>+
+####<Feb 29, 2012 1:11:24 PM EST> <Info> <Cluster> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330539084375> <BEA-000128> <Updating -9071779833610528123S:entwl2t-vm:[7005,7005,-1,-1,-1,-1,-1]:entwl2t-vm:7005,entwl3t-vm:7007:Pinellas1tDomain:Pinellas1tMS2 in the cluster.>+
+####<Feb 29, 2012 1:11:24 PM EST> <Info> <Cluster> <entwl3t-vm.co.pinellas.fl.us> <Pinellas1tMS3> <[STANDBY] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330539084507> <BEA-000128> <Updating -9071779833610528123S:entwl2t-vm:[7005,7005,-1,-1,-1,-1,-1]:entwl2t-vm:7005,entwl3t-vm:7007:Pinellas1tDomain:Pinellas1tMS2 in the cluster.>+
Edited by: john wang on Feb 29, 2012 10:36 AM
Edited by: john wang on Feb 29, 2012 10:37 AM
Edited by: john wang on Feb 29, 2012 10:38 AM

Hi John,
There may be some circumstances like when there are many files in the WEB-INF folder and JPS don't use TLD.
I don't think a 1hour deployment is normal, it should be much more faster.
Since you are using 10.3.5, I suggesto you to install the corresponding patch:
1. Download patch 10118941p10118941_1035_Generic.zip
2. Uncompress the file p10118941_1035_Generic.zip
3. Copy the required files (patch-catalog_XXXXX.xml, CIRF.jar ) to the Patch Download Directory (typically, this folder is <WEBLOGIC_HOME>/utils/bsu/cache_dir).
4. Rename the file patch-catalog_XXXXX.xml into patch-catalog.xml .
5. Start Smart Update from <WEBLOGIC_HOME>/utils/bsu/bsu.sh .
6. Select "Work Offline" mode.
7. Go to File->Preferences, and select "Patch Download Directory".
8. Click "Manage Patches" on the right panel.
9. You will see the patch in the panel below (Downloaded Patches)
10. Click "Apply button" of the downloaded patch to apply it to the target installation and follow the instructions on the screen.
11. Add "-Dweblogic.jsp.ignoreTLDsProcessingInWebApp=true" to the Java options to ignore additional findTLDs cost.
12. Restart servers.
Hope this helps.
Thanks,
Cris

RPURMP00 program takes too long

Hi Guys,
Need some help on this one guys. Not getting any where with this issue.
I am running RPURMP00 ( Program to Create Third-Party Remittance Posting Run ) and while running it in test mode for 1 employee it takes too long .
I ran this in background during off hours , but it takes 19,000 + sec to run and then cancels .
The long text message is No entry in table T51R6_FUNDINFO (Remittance detail table for all entities) for key 0002485844    and     Job cancelled after system exception ERROR_MESSAGE
I check the program and I found a nested loop within the program (include RPURMP02 ) and decided to debug it with a break point.
It short dumped and here is the st22 message and source code extract.
      ----Message -
" Time limit exceeded ".
"The program "RPURMP00" has exceeded the maximum permitted runtime without
Interruption and has therefore been terminated."
      ----Source code extract -
Include RPURMP02
172 &----
173 *&      Form get_advice_info
174 &----
175 *       text
176 ----
177 * --> p1        text
178 * <-- p2        text
179 ----
180 FORM get_advice_info .
181
182 * get information for advice form only if vendor sub-group and
183 * employee detail is maintained
184   IF ( NOT t51rh-lifsg IS INITIAL ) AND
185      ( NOT t51rh-hrper IS INITIAL ).
186
187 *   get remittance items employee number
188     SELECT * FROM t51r4 WHERE remky = t51r5-remky. "#EC CI_GENBUFF "SAM0632658
189 *     get payroll seqno determined by PERNR and RDATN
>>>>>       SELECT * FROM t51r8 WHERE pernr = t51r4-pernr
191                             AND rdatn = t51r5-rdatn
192                             ORDER BY PRIMARY KEY. "#EC CI_GENBUFF
193         EXIT.
194       ENDSELECT.
Has anyone ever come across this situation? Any input from anyone on this?
Regards.
CJ

Hi,
What is your SAP version?
Have you checked if some OSS notes is there on performance.
Regards,
Atish

My Query takes too long ...

Hi ,
Env   , DB 10G , O/S Linux Redhat , My DB size is about 80G
My query takes too long , about 5 days to get results , can you please help to rewrite this query in a better way ,
declare
x number;
y date;
START_DATE DATE;
MDN VARCHAR2(12);
TOPUP VARCHAR2(50);
begin
for first_bundle in
select min(date_time_of_event) date_time_of_event ,account_identifier ,top_up_profile_name
from bundlepur
where account_profile='Basic'
AND account_identifier='665004664'
and in_service_result_indicator=0
and network_cause_result_indicator=0
and   DATE_TIME_OF_EVENT >= to_date('16/07/2013','dd/mm/yyyy')
group by account_identifier,top_up_profile_name
order by date_time_of_event
loop
select sum(units_per_tariff_rum2) ,max(date_time_of_event)
into x,y
from OLD_LTE_CDR
where account_identifier=(select first_bundle.account_identifier from dual)
and date_time_of_event >= (select first_bundle.date_time_of_event from dual)
and -- no more than a month
date_time_of_event < ( select add_months(first_bundle.date_time_of_event,1) from dual)
and -- finished his bundle then buy a new one
date_time_of_event < ( SELECT MIN(DATE_TIME_OF_EVENT)
                         FROM OLD_LTE_CDR
                         WHERE DATE_TIME_OF_EVENT > (select (first_bundle.date_time_of_event)+1/24 from dual)
                         AND IN_SERVICE_RESULT_INDICATOR=26);
select first_bundle.account_identifier ,first_bundle.top_up_profile_name
,FIRST_BUNDLE.date_time_of_event
INTO MDN,TOPUP,START_DATE
from dual;
insert into consumed1 VALUES(X,topup,MDN,START_DATE,Y);
end loop;
COMMIT;
end;

> where account_identifier=(select first_bundle.account_identifier from dual)
Why are you doing this? It's a completely unnecessary subquery.
Just do this:
where account_identifier = first_bundle.account_identifier
Same for all your other FROM DUAL subqueries. Get rid of them.
More importantly, don't use a cursor for loop. Just write one big INSERT statement that does what you want.

Sql Query takes too long to enter into the first line

Hi Friends,
I am using SQLServer 2008. I am running the query for fetching the data from database. when i am running first time after executed the "DBCC FREEPROCCACHE" query for clear cache memory, it takes too long (7 to 9 second) to enter into first
line of the stored procedure. After its enter into the first statement of the SP, its fetching the data within a second. I think there is no problem with Sqlquery. Kindly let me know if you know the reason behind this.
Sample Example:
Create Sp Sp_Name
as
Begin
print Getdate()
Sql statements for fetching datas
Print Getdate()
End
In the above example, there is no difference between first date and second date.
Please help me to trouble shooting this problem.
Thanks & Regards,
Rajkumar.R

i am running first time after executed the "DBCC FREEPROCCACHE" query for clear cache memory, it takes too long (7 to 9 second)
Additional to Manoj: A
DBCC FREEPROCCACHE clears the procedure cache, so all store procedure must be newly compilied on the first call.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Query designer takes too long to save a query

Hi dear SDN friends.
I´m working with query designer in BI 7 and sometimes it takes too long to save a query, about ten minutes. Sometimes it never ends saving and some other times it saves the same query in 1 minute.
Can anybody please give an advice about this behavior of the query designer?
We have recently update BI to sp18. In query designer I have sp5 revision 529
Best regards,
Karim Reyes

Hello Karim,
I would suggest testing this again in the latest Frontend Patch available (FEP 602). In FEPs 600, 601, & 602 there were some performance and stability improvements made which may correct your issue. If the issue persists, I would suggest then opening a Customer Message via Service Marketplace.
It can be downloaded from:
http://service.sap.com/swdc
u2192Download
u2192Support Packages and Patches
u2192Entry by Application Group
u2192SAP Frontend Components
u2192BI ADDON FOR SAPGUI
u2192 BI 7.0 ADDON FOR SAPGUI 7.10
u2192 BI 7.0 ADDON FOR SAPGUI 7.10
u2192Win32
See SAP Note 1085218 for planned FEP releases.
I hope that helps.
Regards,
Tanner Spaulding
SAP NetWeaver RIG Americas, BI

Displaying PathGeometry into canvas take too long time

Hi every one,
I am working on spatial data with an application WPF and I would like to draw a map from data queries.
I got my data and I am able to draw them on a canvas with scroll bar and zoom.
My problem is when I want to zoom or scroll the canvas take a long time before draw the map.
The big problem is there :
Dim poly As New Polygon
poly.Stroke = Brushes.Red
poly.Fill = Brushes.Orange
poly.StrokeThickness = 5
Dim colPoint As New PointCollection
For i = 1 To geo.STNumPoints
Dim ls As New LineSegment()
colPoint.Add(New Point(geo.STPointN(i).STX.Value - extentA, geo.STPointN(i).STY.Value - extentB))
Next
colPoint.Add(New Point(geo.STPointN(1).STX.Value - extentA, geo.STPointN(1).STY.Value - extentB))
poly.Points = colPoint
masterCanvas.Children.Add(poly)
so the canvas is "masterCanvas" and i add each Polygon one by one. I would like if it is possible to gather all polygon into one "image" and then when it will refresh the canvas it will draw only one thing.
Regards.

Hi,
I found that you have posted it in the forum Acamar suggested.
http://social.msdn.microsoft.com/Forums/vstudio/en-US/e2d50b4e-0d76-4a3c-b229-521b648b54b3/displaying-pathgeometry-into-canvas-take-too-long-time?forum=wpf#e2d50b4e-0d76-4a3c-b229-521b648b54b3
Please just focus on that thread, and you could mark if any reply which is helpful as answer.
Thanks for your understanding.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My trash takes too long or doesn't empty at all.

Similar Messages

Maybe you are looking for