My trial version ps cs5 worked for a few hours, now there are errors?

I am trying out cs5, and might possibly buy it soon. I want to try some of the new features while cleaning up an old pixelated logo. last night i was able to use ai. and ps. no problemo, but this morning every time i open a new file to the clipboard size of my image, this error signature and a lot of other stuff i cant copy and paste pops up ...
AppName: photoshop.exe     AppVer: 12.0.0.0     ModName: photoshop.exe
ModVer: 12.0.0.0     Offset: 017950a9
anyone?

That's not enough info... If there is "otehr stuff" then the answer is probably there somewhere. And without providing info on your system hardware, scanners, plug-ins, otehr software and other things like virus scanners/ security tools that might interfere, even that extra info is useless. You will have to tell us a lot more than just saying that it stopped working...
Mylenium

Similar Messages

  • My siri is not working for a few days now..?

    pls help me , my siri has not been working for a few days now ... pls advice

    Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Some users have reported that Apple is aware of the issue.
    http://www.apple.com/support/systemstatus/

  • I downloaded the new software on my iphone 4 and it worked for a few hours and now won't turn on

    i downloaded the new software on my iphone 4 and it worked for a few hours and now won't turn on

    Reset, hold both home and power buttons until the iPhone begins to restart. If still nothing, connect to Wall Charger for 10 minutes, iPhone may turn ON itself. If still nothing keep on charger and Reset. It can take about 20 seconds of holding both buttons while on charger.

  • I have reset this firefox daily... it works for a few hours, then will not open a website for 15 mins, and I cannot get emails addresses to show up when sending

    This new updated firefox is awful.. I cannot get websites to open for about 10-15 mins it keeps showing S1 Yimg.com ans s.ytimg, and says shockwave plug in is bad, and all other kinds of crap..
    The connection was reset.. I got this msg below and had to reopen this page in another window, and reload it to be able to write on this now... and my network connection is working xlnt, and there is no firewall blocking firefox...
    The connection to the server was reset while the page was loading.
    The site could be temporarily unavailable or too busy. Try again in a few moments.
    If you are unable to load any pages, check your computer's network connection.
    If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
    Try Again
    I never had this until I got all these new automatic updates with this new firefox.. I did a system restore, which helped for 1 day, and I have had to reset firefox daily to use it.. And now it took 10 mins to open this page, and then I had to reload this page twice to write this..
    I've used firefox for years, and never never had any problems with it. And I see alot of similiar complaints like mine on this forum now..
    What suggestions do you have for me NOW... much appreciated, Cyrus

    I uninstalled all the old flash players and installed the flash player v16.0.0.235 from the Adobe website posted.
    And Firefox is still the same. It takes forever to web search, It takes a long time to get on Youtube, and a longer time now to open a video..
    It's actual worse since I upgraded to the newer flash player.
    I'll do one more fifefox reset (this is the 8th one in a week)
    and it works for a few hrs, and goes back to the slowww way of working...
    Many of my friends I talked to about this, told me to switch over to Chrome like they had to do..
    I guess that's the only alternative now..
    Thankyou all for your help and suggestions anyway.. :)

  • I plugged my iPhone 4s into my macbook air and it asked me if I wanted to update to the latest iOS update and when I did, it stayed on the black update page for a few hours now and it is not turning on. How do I get my phone to restore?

    After plugging my phone into my computer, it asked me to update and then got stuck on the update page and the bar hasn't moved at all.
    Then I plugged it into my computer after it died just like it told me to and it asked me if i wanted to restore my phone. i pressed 'okay' and it is stuck on the black page again for a few hours without the bar moving at all and my phone is completely useless.
    How can I get my phone to update and restore?

    If you're in recovery mode, all data is ALREADY lost.  You've no choice but to restore.

  • I restarted my computer and it went to the screen withy the Apple logo and processing bar and it loaded half way but has been stuck there for a few hours now, and I don't know what to do?

    I restated my computer and the apple logo and processing bar came up and it loaded half way then stopped and has been sruck like that for a few hours and I don't know how to fix it?  I really need to use my computer because I have a big test and all my information is on there

    OS X 10.9 Mavericks/ 10.10 Yosemite
      1. Repair Disk      http://support.apple.com/kb/PH5836
      2.  Reset PRAM:   http://support.apple.com/kb/PH14222
    Best.

  • Site to Site Replication only works for a few hours in the morning (each morning)

    We have been fighting an odd active directory replication issue for over a month now and I am hoping that someone can provide some insight. We have 5 AD servers in the following orientation...
    Site HQ
    - PRIME running Windows 2008 R2
    - AD2 running Windows 2008 R2
    Site COLO
    - AD3 running Windows 2008 (not R2)
    - AD3NEW running Windows 2008 R2
    Site BRANCH
    - AD4 running Windows 2008 R2
    The domain is at the Windows 2008 Functional Level.
    There are always on site to site VPNs between all 3 sites and IP Intersite Transports Site Links defined for all 3 possible connections with Cost of 100 and interval of 15. Each IP site link is configured with a schedule of available all day long.
    Every day the following sequence of events happens...
    * Somewhere between 6:30 and 7:30am all the servers start to sync with each other perfectly. We can make AD changes and they replicate across all servers without issues. During this time all the repadmin commands work well across all servers.
    * Typically somewhere in the 10:30 to 11:30am time frame we start to get errors replicating data - specifically between the HQ and COLO sites. This manifests itself as Event 1232 Call Timeout from the DC RPC Client and and Event 1925 from the KCC. Additionally
    repadmin commands fail when attempting to connect to the BRANCH servers.
    * For the rest of the day the intra-site replication between PRIME and AD2 work fine - and periodically the BRANCH AD server is updated as well. But the COLO sites remain unreplicated and continue to get errors for the remainder of the day. While this down
    - the ability to ping and remote desktop between the servers is perfectly fine - so even if there were a network hiccup that happens - the network is stable for hours without the sites recovering.
    * Magically the next morning around 6:30 and 7:30am all the servers are able to replicate without issue and we get 3-5 hours of immediate replication and then it happens again.
    As I stated above - there is always on site-to-site VPN connections between all 3 sites that are actively monitored by PRTG. These connections remain open all day long. The Site topology has the COLO servers attempting to replicate with the HQ servers -
    and both sites have 100MB data connections that remain active during the entire time. Additionally PRTG bandwidth monitoring shows that these links have no spikes in traffic anywhere near the max capacity of those links during the time that the outages begin
    nor during the rest of the day.
    Does anyone have any insight as to why these servers would stop communicating with each other about the same time every day and report errors? Also why it would magically start to work again each day without any changes being made to the network or the AD
    configuration?
    This has been going on for over a month now. When it first started to happen we had 1 Windows 2008 server and 2 Windows 2003 servers in the HQ. We phased out the Windows 2003 servers and upgraded the functional level to Windows 2008 - that did not solve
    the problem. We tried to put a new Windows 2008 R2 server out at the COLO site hoping that if it was limited to the other server then only the one server would be impacted. But now they both appear to be having connectivity issues at the same time.
    It is as if there is one hung connection that is blocking all the other syncs to this site and then someone each morning that bottleneck is released.
    Thank you in advance for any direction you can provide.

    As was stated above - ALL Domain Controllers have direct access to each other through Firewall to Firewall site to site VPNs and the Inter-Site Transport Links mirror that setup. So from the OS perspective any of the AD servers can directly connect to any
    other one.
    There are 3 IP Inter-Site Transport Links defined
    HQ < - > COLO   (Contains HQ and COLO sites) Cost 100  Replication Interval 15
    HQ < - > BRANCH  (Contains HQ and Branch sites) Cost 100 Replication Interval 15
    COLO < - > BRANCH  (Contains COLO and Branch sites) Cost 100 Replication Interval 15
    And on IP Inter-Site Transports "Bridge all site links" is enabled (although disabling it doesn't fix this problem as we have already tried that).
    Right now the servers are claiming (via Active Directory) to be unable to replicate with each other. But I am able to do direct pings as well as open stream sockets using "telnet <otherserver> <port>" on ports 3268 (gc), 88 (kerberos),
    389 (ldap), 135 (replication), 636 (ldap ssl), 53 (DNS). So there is nothing that I can see between the servers that is blocking TCP connectivity.
    I cannot seem to make this any clearer. The sites are 100% functional and responsive for several hours per day - and then mysteriously go into a state of complete denial for a lack of a better word for the rest of the day - only to return back to normal
    again reliably each morning.
    It is as if the sites get into a mode where something in the RPC area are simply refusing to talk to each other despite the servers having full access at the network level.
    Another data point to add to this mystery. While it is in the state where the HQ and COLO servers are refusing to sync with each other. You can launch the AD Users and Computers snap-in, right mouse click on the domain, change the Current Directory server
    and all 5 servers show up as ONLINE. You can pick any of them (including the one that is unable to replicate with) and make a direct change on that server.
    So while the servers are complaining about being unable to talk to each other - the snap in is connecting between those servers and is able to modify it without issue.
    Conversely - when the replication is failing the DNS management tool is unable to connect to the remote servers (i.e. COLO can show itself and the other COLO server. HQ can show PRIME, DC2, and DC4 without issue. But no overlap).
    Not sure that helps at all - but shows our frustration when two servers refuse to replicate but you can easily remote connect from one to the other and make the change.

  • Hello, my Mozilla hasn't work for almost 24 hours now (not responding right after opening it), and it was crashing a lot a few days before that

    For a few months Mozilla was crashing at least once a day, and a few days ago it started going completely out of hand, crashing, closing unexpectedly every now and then. Since yesterday night it hasn't worked at all, i wasn't able to open any singlel web-site. I have Windows 7 on my laptop, updated McAfee (no viruses detected) and fix-it utilities (optimized 100%). I never got crash ID, can't open troubleshooting page as Mozilla wouldn't even open completely.

    Can you get your home page?
    If you can't even get your home page, I suggest creating a new Firefox profile. In addition to bypassing current add-ons and custom settings, it should have completely fresh settings databases and a fresh cache folder.
    First, I recommend backing up your Firefox settings (profile folder) in case something goes wrong. See [https://support.mozilla.org/en-US/kb/Backing+up+your+information Backing up your information]. In Windows 7, your profile folder is in here:
    C:\Users\''username''\AppData\Roaming\Mozilla\Firefox\Profiles
    You can copy that entire Firefox profile folder somewhere outside of the Mozilla folder.
    Next, with Firefox closed, start up in the Profile Manager as described in the article [https://support.mozilla.org/kb/Managing+profiles Managing profiles]. Any time you want to switch profiles, close Firefox and return to this dialog.
    If the new profile browses normally, you can migrate key settings like bookmarks from your problem profile to the new one. See [https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile].
    Hope this helps.

  • My baby daughter was alone with my iPad for a few minutes & now there's a rainbow stuck on the screen?!

    My iPad has a rainbow stuck on it

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • HT1766 i have been trying to update my wifes iphone 4 for a few hours now. the update it fine i cant seem to get the phnoe off the the et up phone sceen! help

    ok my last back up was on itunes @3 :22 now its connected with itunes but i cant get the phone back to making call yet why?

    Why not?
    What is displaying on the screen?

  • Photoshop CS5 trial version has stopped working.  Will the Full version do the same?

    Once I try to open a file or create a new file in the trial version it stops working and Windows closes the program. I have read on the forum that others had this problem so I tried the solutions without luck.  A sales live chat guy tonight told me that the trial version will not allow a lot of the features and I should have  no problem with the full version.  Does anyone know if this is accurate?  That is a lot of money to spend for a full version to stop working when a file begins to open.

    Hi Iamrami,
    You've posted in the forum for Photoshop.com (an  online service and product info portal).
    For a speedier response regarding Photoshop CS5 iisues, please repost here: http://forums.adobe.com/community/photoshop.
    thanks,
    - Don

  • Hello, I have installed Reader, Adobe Acrobat, trial versions of Photoshop and Illustrator. Some more than once. They work for a few days at most then I am told to re-install. I cant look at any pdf file even though I can still see reader in my programs.

    Hello, I have installed Reader, Adobe Acrobat, trial versions of Photoshop and Illustrator. Some more than once. They work for a few days at most then I am told to re-install. I cant look at any pdf file even though I can still see reader in my programs. What is going on and what can I do to fix this?

    Unfortunately no, It says "Adobe not responding" as well when I try to open a pdf. It has done this a few times where I had to uninstall and reinstall. Also, Illustrator tells me to uninstall/reinstall as well.

  • Will a Serial Number for Photoshop CS5 Work for CS5 Extended?

    Hello,
    I've recently subscribed to Photoshop CS5 and Dreamweaver CS5.5. In my Order History, it says 'Photoshop CS5', not 'Photoshop CS5 Extended'. However the download links in my Order History does not work (yes, I do have Adobe Download Assistant--in fact, I used it to download Dreamweaver CS5.5 without any problems).
    So, I decided to download the trial version instead and enter my serial number that way. However, the problem is that I see Photoshop CS5 on Adobe's Products page, yet when I click on it, it leads me to Photoshop CS5 Extended.
    I don't want to waste my time downloading CS5 Extended, only to find out that my serial number for CS5 does not work on it. So my question is: Will a Serial Number for Photoshop CS5 work for Photoshop CS5 Extended?
    Thank you for your time!
    -Mari

    Resolved!
    For anyone else having the same problem: I contacted Adobe via phone, and they said that a serial number for Photoshop CS5 will work with Photoshop CS5 Extended.

  • How's Adobe Media Encoder CS5 working for you?

    This is the first thread on the new Adobe Media Encoder forum, so I thought that it would be appropriate to open it up by just asking a general question:
    How is Adobe Media Encoder CS5 working for you?
    Please be sure to install the Adobe Media Encoder CS5 (5.0.1) update. Instructions for updating are included in this post about the Premiere Pro CS5 (5.0.2) update.
    If you're having a specific problem that you want help with, or if you have a specific question, please start your own thread on this forum. This thread is intended for general feedback about how Adobe Media Encoder CS5 is working out for you.

    First of all IT IS GREAT and I use it a lot I also used the CS4 version before!
    But I have to report two issues about version CS5:
    1. I bought the English version of the production premium CS5 but I have a German operating system (win7 64bit) all other adobe application are in English except Adobe Media Encoder it shows up in German language! Not a show stopper but should be fixed.
    2. Recently I wanted to encode a video into an h264. I made some custom settings for that and the encoded video played very stuttered in Microsoft Media Player 12 (like 12fps instead of 25fps [settings were set correct in AME]) but fine in Quicktime and VLC Player (execpt for the gamma bug but that's an other story...)
    I did a lot of testings and found the issue! Sometimes when you change a lot of the h264 settings (don't know when it happens exactly) Media Encoder seems to not set the fps correctly allthough AME shows 25fps in it's settings this setting is not encoded into the final file!
    Quicktime and VLC seems not to care about the missing information but Windows Media Player gets confused.
    It does not happens when using a preset in AME it only happens when changing a lot and using custom settings!
    You can see the missing fps setting when right clicking the encoded file and choose properties (german:Eigenschaften) switch the tap to Details and there is no fps setting in the stuttering files but when encoded with a preset in AME there is the correct 25fps setting!
    I have attached a screenshots to demonstrate it:
    My workaround so far was to choose a preset with 25fps and close to my desired settings and change as few as possible - Fingers crosses and with a chance of 3/4 I was able to encode a working file containing the fps setting in it which plays perfect in Microsoft Media Player!
    I hope you take a look into this issue because if you have a long file and you have to encode it again because it fails....... uiuiui
    Thanks Todd for the possibility to give this direct feedback to Adobe
    This is real support!

  • I have a trial version of Photoshop and Lightroom installed with a view of taking out a subscription. Some of the features in this trial version do not work is this just because it is a trial version.

    I have a trial version of Photoshop and Lightroom installed with a view of taking out a subscription. Some of the features in this trial version do not work is this just because it is a trial version.

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

Maybe you are looking for