My TV doesn't recognize my 2010 MBP

Help! I've been trying to get this to work for hours.
I just purchased a 32" Dynex LCD yesterday. I connect my MacBook by mini-display port adapter to HDMI, to the TV. The computer recognizes the TV (the model number shows up in display preferences and everything), but the TV just has a black screen.
Just so you know, I have already reset the PRAM, my software is up to date, tried every resolution, yes it is on the right input (I tired both HDMI connections on the TV as well), mirroring is enabled and the cord (generic) works fine between my computer and another TV. If it's not on the right resolution, the TV will say no signal. My television is 720p, so when I have that selected as the resolution, the tv doesn't say no signal, just has a black screen. I have also tried rebooting, turn the tv on and off, unplugging the tv, etc., etc.
I have read discussion after discussion, and no one seems to have an answer. I have also called Dynex and Apple, and neither company seems to know what the issue is, they just say "I don't know why it's not working, it should work." Well... it should, but it's not! HELP!

Try to find the native specs of the TV for resolution, aspect ratio, color depth, etc and set it to those on the Mac. Also, try non-mirrored display, and test your cables on something that you know is working.

Similar Messages

ITunes 10.5.2.11 doesn't recognize Outlook 2010

Hi,
i'm facing a problem with my itunes which is it doesn't recognize the outlook.
I just install Windows, Office and iTunes into my new pc and when i tried to sync my iphone, it appear there in info to install outlook to sync the contact and calendar. But i already did it.
Please help me out.
Thanks.

anyone?..please help me out..
i tried to sync my contact but itunes says to install outlook.
Outlook already installed.
Btw already update my itunes to 11.01..but still no luck..
Message was edited by: mexec

Adobe Shared Review Doesn't Recognize Outlook 2010 as Default Email Program

We just received new laptops from our company with Windows 7 on them and Acrobat 9.4.0. Previously, we were using Windows XP with Acrobat 8.3.2 and didn't have the following issue.
When I begin a shared review and get to the Add Email dialog, I click To: and Acrobat pops up an error that Outlook is not the default email program. Fact is, though, it is the default email program. I checked under Default Programs and made sure Microsoft Outlook was set.
Needless to say, this completely prohibits us from using Shared Review. There is no way around this that I can see (I tried just typing in email addresses but then it tells me it can't send it because I don't have an email client).
Outlook opens fine via email links from my browsers (IE and FF), other documents, etc. The IE default email is set to Outlook as well (not sure that makes a difference).
My fear is that this is a result of Windows 7 'not being fully supported by Adobe until an undisclosed release'. Please tell me I am wrong and there is a setting I am missing.
I am inserting an image of the error.

There have been other messages concerning compatibility issues with MS Office 2010
Since Outlook is part of Office, I will guess that is your problem
Will NOT work with MS Office 2010 - http://forums.adobe.com/thread/687988?tstart=0
http://ptihosting.com/blog/it-blog/microsoft-office-2010-rtm-and-adobe-acrobat-incompatibl e/
Also discussed in the Acrobat FAQ http://www.adobe.com/products/acrobat/faq/

This Question is at least 2.5 years old. But still an issue. I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7. Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.

I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7. Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.

iTunes does not use the .xml it uses the .itl
If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one.

My MBP doesn't recognize my iPhone3

It's been about 19 applications since I last synced my iPhone3 with my MBP (OS 10.4.11) and now the MBP doesn't recognize the phone at all. Doesn't even see it as connected. I have no software updates available when I check and I have no idea what to do.
I wanted to upgrade my iPhone version from 3.1.2 to 3.1.3, hopefully that is still possible. I'm missing out on an important app and upgrading to Leopard at this time is not an option.

I'm afraid you have no choice but to update if you want to update your apps or OS. The minimum Mac requirements are:
# Mac computer with USB 2.0 port
# Mac OS X v10.5.8 or later
# iTunes 9.2 or later (free download from www.itunes.com/download)
OS 3.1.3 is no longer available from Apple. Only iOS 4.0.2 is available now. If you're still using a 3G iphone, I would recommend waiting until iOS 4.1 is released before you update. However, you need to update your computer to 10.5.8 or later & itunes to 9.2 or later. If you've got an intel Mac, you can go straight to SL, the $29 upgrade disk will work regardless of what you might read or be told otherwise. Apple no longer sells leopard, so if you went that route you'd have to find a retail disk on someplace like eBay.

MBP doesn't recognize Panasonic HDC-TM900

My MBP doesn't recognize Panasonic HDC-TM900 videocamera. I tried to connect both devices through an USB cable, but the camera is not recognized by the computer, no trace of the camera in System Profiler or Disk Utility. What should I do to solve this problem? Any tip welcomed.

It's very possible that the card was not formatted properly inside the camera or you are recording in 1080p60 (or 50) and your editing software does not recognize that format.
I hope that makes sense

Mid 2010 MBP crashes frequently

Hi,
I have mid 2010 MBP and lately crashes have increased in frequency. Posted is a crash log. Appreciate your help.
Yosomite 10.10.1    2.4Ghz, Core i5 4GB RAM
Panic (system crashes) log:
Source: /Library/Logs/DiagnosticReports/Kernel_2014-12-15-142314_Vishal-Jains-MacBook-Pr o.panic
Size: 10 KB (10,123 bytes)
Last Modified: 12/15/14, 5:50 PM
Recent Contents: Anonymous UUID:       2F557098-4680-D2FD-DFFD-C9916F4A7FFB
Mon Dec 15 14:22:59 2014
*** Panic Report ***
panic(cpu 3 caller 0xffffff7f8695ef63): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff80ab729000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.7.21/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 3), Frame : Return Address
0xffffff80995230f0 : 0xffffff8003d3a811
0xffffff8099523170 : 0xffffff7f8695ef63
0xffffff8099523250 : 0xffffff7f848c2b9f
0xffffff8099523310 : 0xffffff7f8498c18e
0xffffff8099523350 : 0xffffff7f8498c1fe
0xffffff80995233c0 : 0xffffff7f84c0b056
0xffffff80995234f0 : 0xffffff7f849af82d
0xffffff8099523510 : 0xffffff7f848c95f1
0xffffff80995235c0 : 0xffffff7f848c70fc
0xffffff80995237c0 : 0xffffff7f848c807a
0xffffff80995238a0 : 0xffffff7f85f43446
0xffffff80995238e0 : 0xffffff7f85f52dff
0xffffff8099523900 : 0xffffff7f85f81493
0xffffff8099523930 : 0xffffff7f85f814ed
0xffffff8099523970 : 0xffffff7f85f58a1f
0xffffff80995239c0 : 0xffffff7f85f23027
0xffffff8099523a60 : 0xffffff7f85f1eda1
0xffffff8099523a90 : 0xffffff7f85f1c873
0xffffff8099523ad0 : 0xffffff800430064c
0xffffff8099523b60 : 0xffffff8004302773
0xffffff8099523bc0 : 0xffffff8004300003
0xffffff8099523d00 : 0xffffff8003dea517
0xffffff8099523e10 : 0xffffff8003d3e91c
0xffffff8099523e40 : 0xffffff8003d235a3
0xffffff8099523e90 : 0xffffff8003d33e8d
0xffffff8099523f10 : 0xffffff8003e0a142
0xffffff8099523fb0 : 0xffffff8003e3ac66
      Kernel Extensions in backtrace:
         com.apple.nvidia.classic.NVDAResmanTesla(10.0)[796AE430-39FB-3255-8161-D52AFA28 EE2B]@0xffffff7f84872000->0xffffff7f84adbfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f84524000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[F4738C55-B507-3627-A9CA-3D29A5230A03]@0xff ffff7f84862000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7f8481b000
         com.apple.driver.AppleMuxControl(3.7.21)[32B7E2DE-1F9D-3555-B687-7A76A62B81D2]@ 0xffffff7f86950000->0xffffff7f86963fff
            dependency: com.apple.driver.AppleGraphicsControl(3.7.21)[62689710-EEA7-307A-AC83-B8F25DA88 A6A]@0xffffff7f86948000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[70E2B65E-A91A-3522-A1A0-79FD63EABB4C]@0xfffff f7f847a9000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f84524000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7f8481b000
            dependency: com.apple.driver.AppleBacklightExpert(1.1.0)[0183904C-6A16-32C4-9405-EEFD7F820B 02]@0xffffff7f8694b000
         com.apple.nvidia.classic.NVDANV50HalTesla(10.0)[7FE40648-F15F-3E18-91E2-FDDDF4C DA355]@0xffffff7f84ae6000->0xffffff7f84d8ffff
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(10.0.0)[796AE430-39FB-3255-8161-D52AFA 28EE2B]@0xffffff7f84872000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f84524000
         com.apple.GeForceTesla(10.0)[67CD214F-0F26-3BEF-BAD0-CF0F83C2616D]@0xffffff7f85 f00000->0xffffff7f85fcdfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f84524000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[F4738C55-B507-3627-A9CA-3D29A5230A03]@0xff ffff7f84862000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7f8481b000
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(10.0.0)[796AE430-39FB-3255-8161-D52AFA 28EE2B]@0xffffff7f84872000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
14B25
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide:     0x0000000003a00000
Kernel text base: 0xffffff8003c00000
__HIB text base: 0xffffff8003b00000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 1304308326930
last loaded kext at 80098701151: com.apple.driver.AudioAUUC 1.70 (addr 0xffffff7f861ed000, size 32768)
last unloaded kext at 284478661603: com.apple.driver.AppleUSBUHCI 656.4.1 (addr 0xffffff7f8510f000, size 65536)
loaded kexts:
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.37
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.1f2
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 267.0
com.apple.driver.AppleHDA 267.0
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleIntelHDGraphics 10.0.0
com.apple.GeForceTesla 10.0.0
com.apple.driver.AppleHV 1
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleMuxControl 3.7.21
com.apple.driver.AppleIntelHDGraphicsFB 10.0.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBCardReader 3.5.0
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 327.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.7.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleUSBHub 705.4.1
com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 267.0
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.iokit.IOSurface 97
com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleGraphicsControl 3.7.21
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.nvidia.classic.NVDAResmanTesla 10.0.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.iokit.IOBluetoothFamily 4.3.1f2
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleHDAController 267.0
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOHDAFamily 267.0
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.driver.AppleSMC 3.1.9
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.0
com.apple.iokit.IOUSBMassStorageClass 3.7.0
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.CoreStorage 471
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IO80211Family 700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
System Profile:
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.1f2 15015, 3 services, 19 devices, 1 incoming serial ports
Thunderbolt Bus:
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: Built-in iSight
USB Device: IR Receiver
Serial ATA Device: Hitachi HTS545032B9SA02, 320.07 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.4 GHz, 4 GB, SMC 1.58f17
Network Service: AirPort, AirPort, en1
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB

You have the MacBookPro6,2—the Edsel of Macs. It may have the logic-board defect that was covered by this recall.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider, to have the machine tested. The routine hardware diagnostics used by service providers do not detect the fault. There is a specific test for this issue that Apple calls "VST" (for "Video Switching Test.") Ask for it. A "Failed" result means that the fault is present. However, according to reports, some units may pass the test, and yet still be deemed eligible for repair under the program. Your experience may vary.
Print the first page of the panic report, if any, and the support page linked above, and bring them with you.
Note that the recall only applies within three years of purchase. After that, Apple may refuse the service. In that case, you may be quoted a price of about $300 (in the U.S.) for a "depot repair," which involves shipping the unit to a central repair facility and takes about two weeks. For that flat fee, anything found wrong with it should be fixed, not just the logic board.
The model was discontinued on February 24, 2011, so the recall has nominally ended. Some units may have been sold after that date by Apple as refurbished, or by resellers as new, and they might still be covered.
Residents of the EU may be entitled to warranty service for up to six years after purchase.
Some owners report that their unit was repaired under the program after the deadline had passed. Others report that the repair was covered by the extended warranty from a credit-card issuer. Again, your experience may vary.
Sometimes the replacement part is also defective, so be prepared for that possibility. If you decide to pay for a new logic board, test thoroughly during the 90-day warranty period on the repair. Some owners have reported that they went through as many as three replacement boards before getting one that worked.
If it's too late for your unit to be repaired free of charge, and you don't want to pay for the service, you may (or may not) be able to stop the panics by disabling automatic graphics switching. To use the discrete graphics processor, you'll need a third-party utility to switch to it manually.
Often the problems start after an OS upgrade. If the upgrade was recent, and you have backups, then you can revert to a previous OS X version.
If you're dissatisfied with Apple's response, please keep in mind that no one here represents the company or can help with customer-service issues.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed.

2012 Macbook Pro 15" doesn't recognize VGA monitors plugged into displayport

We have a 2012 Macbook Pro 15" (and a 2010, and a 2011). The 2012 doesn't recognize VGA/DVI (old) monitors plugged into it, but it does recognize new DVI monitors.
What gives? I'm not even sure how to diagnose or attempt to treat this.
2012 Macbook Pro
OS X 10.8.3
Wacom Cintiq
Vuzix iWear
etc

Does it see, recognize, any usb devices?
Have you tried a smc reset?
http://support.apple.com/kb/HT3964
If that doesn't fix it and no usb device is being seen by that port then you have a hardware problem and you need to take the system to apple to be fixed before your warranty runs out.

White apple remote and 2010 MBP

The white apple remote which came with my 2007 24" iMac randomly stops working on my 2010 15" 2.4 MBP during my slide show which is very annoying, I have to switch out of keynote presentation to system preference panal and click on the pair botton under Security settings to get it back to work again. (I teach so it's very distracting for both my students and me), it happened once yesterday during class I thought it was the battery so I went out and got a new one during class break. Guess what, it happened twice today too. I checked with Photo Booth by clicking the remote directly into the iSight camera to make sure that it has no problem emitting infrared beam.
What's weird is it had no problem working on my wife's 13" 2010 MBP what so ever (I used to take her computer to class before I got my 15" last week).
Anyone can offer me any help or has ever gotten in to situations like this? I'd hate to go back to the apple store for a exchange since the new 15" runs pretty well and the both apple stores in Beijing are always packed.
Thanks in advance!
oh and also, ever since 10.6.5 update I have to restart my computer before every class to get it to recognize a projector, any one knows how to fix this too?

This might not be the best forum for solving your problem, you might do better on <http://discussions.apple.com/forum.jspa?forumID=1296&start=0>, for interfaces.

IMovie 8.0.6 doesn't recognize my iSight camera.

I have a Mid 2010 MacBook Pro running OS X 10.9.5;
iMovie 8.0.6 doesn't recognize my iSight camera. The iSight camera works on Skype, Photo Booth and FaceTime. I hadn't used iMovie in almost a year, however, the last time it recognized the iSight camera without a problem.
Does anyone have any ideas on how to fix this?
Thanks!

rudsmac4me,
The article linked below details a potential solution that may help get iMovie to recognize your iSight camera.
In iMovie 7.1.2 or later, you may not be able to use your built-in iSight camera to capture footage in iMovie. iMovie may not recognize the camera. This may occur even if you are able to activate the camera in other applications, such as iChat.
iMovie '08: Built-in iSight camera not recognized
http://support.apple.com/en-us/TS2472
Cheers,
Allen

APE8 worked OK with mp4 files, not doesn't recognize

I started a project last fall and brought all my .jpg stills and all the .mp4 HD video from my camera into Premiere Elements 8. I used organizer to create folders by location and put all relevant stills and video into the folders.
Everything played OK and I even did a couple of test movies which worked fine.
I've now re-opened the project and the the software is responding that the file format is not recognized by premiere elements 8 or I don't have the proper codec installed.
I had installed xvid and divx pro, but these files HAVE NOT been converted into those formats.
Please advise as to why the videos were working OK last September (2010), and now (Jan 2011) the product doesn't recognize.
Thanks,
Jack

Thanks for the suggestions!!
I got the GSpot.exe and it shows "status undetermined" for the H264 codec.
I reinstalled QuickTime, but a new H.264 codec is not shown when I list the installed codec in gspot under system.
I reviewed info on DivX and they do indicate that they install their own version of the H.264 codec. Even tho the files were recorded NOT in the DivX format and had not been converted, maybe the install of DivX pro did screw up the H.264 codec and now APE8 doesn't know what to do.
I haven't rebooted the machine yet, but I'd like to keep the DivX software. If I uninstall it, I don't think a previous version of the H.264 will be restored.
I got a file called x264.exe from free-codecs.com and ran it, but i'm worried because it didn't respond with any install messages and doesn't show up in the installed program listing. i ran a malwarebytes scan with the current database but it didn't find anything.
After all this, the H264 status using gspot is still undetermined. I restarted the APE8 project and the file thumbnails show up OK from the prior import (if I update they go to the "broken" icon), but trying to use still results in the unknown codec.
I'll reboot and see if there are any changes.
Thanks again

DNG Converter Doesn't Recognize NEF for D7000

I have been lon time user of Adobe DNG Converter with Olympus E-500 but I recently got the new Nikon D7000. I have Elements 9 and I am using DNG Converter 6.3.0.79. I download the Elments Verison of the Camera Raw update that came out in December 2010. When I open up my DNG Converter it doesn't recognize any of the NEF files on my camera. I must missing somthing but not sure what it might be. Do I need to add a profile somewhere for it to see the NEF extention? I am bit at a loss.
Thanks for any help

What do you mean by reinstall? Do I reinstall PSE 9 and then apply the patch or do I just do the patch again? I have installed the patch a couple of times and nothing is different. There is something wrong with the installation because now my Olympus RAW files do not show up either and they did as of yesterday prior to the installation of the 6.3 update.
And yes I can load the NEF into Elements but I like the batch convert option for RAW files.
Thanks everyone for your help.
Kevin

6140 + CSM200 - Doesn't recognize drives

Our company have 6140 with 16 HDD's and bought used CSM200 tray with 8 HDDs
The problem is - CAM doesn't recognize drives in CSM200:
TRAY,SLOT     STATUS      CAPACITY     CURRENT DATA RATE     PRODUCT ID FIRMWARE VERSION
1, 1      Removed     0 GB      4 Gbit/s      ST330055FSUN300G 3192
1, 2      Removed     0 GB      4 Gbit/s      ST330055FSUN300G 3192
1, 3      Removed     0 GB      4 Gbit/s      ST330055FSUN300G 3192
1, 4      Removed     0 GB      4 Gbit/s      ST330055FSUN300G 3192
1, 5      Removed     0 GB      4 Gbit/s      ST330055FSUN300G 3192
1, 6      Removed     0 GB      4 Gbit/s      ST330055FSUN300G 3192
1, 7      Removed     0 GB      4 Gbit/s      ST330055FSUN300G 3192
1, 8      Removed     0 GB      4 Gbit/s      ST330055FSUN300G 3192
Events:
Date/Time: Sun Feb 21 10:25:03 GMT+03:00 2010
Sequence number: 5158
Event type: 2401
Event category: Notification
Priority: Informational
Description: Hot swap monitor detected drive insertion
Event specific codes: 0/0/0
Component type: Drive
Component location: Tray.01.Drive.06
Logged by: Controller in slot A
Date/Time: Sun Feb 21 10:25:04 GMT+03:00 2010
Sequence number: 5119
Event type: 2401
Event category: Notification
Priority: Informational
Description: Hot swap monitor detected drive insertion
Event specific codes: 0/0/0
Component type: Drive
Component location: Tray.01.Drive.06
Logged by: Controller in slot B
Date/Time: Sun Feb 21 10:25:10 GMT+03:00 2010
Sequence number: 5169
Event type: 2229
Event category: Notification
Priority: Critical
Description: Drive failed by controller
Event specific codes: 0/0/0
Component type: Drive
Component location: Tray.01.Drive.06
Logged by: Controller in slot A
Date/Time: Sun Feb 21 10:25:10 GMT+03:00 2010
Sequence number: 5170
Event type: 2229
Event category: Notification
Priority: Critical
Description: Drive failed by controller
Event specific codes: 0/0/0
Component type: Drive
Component location: Tray.01.Drive.06
Logged by: Controller in slot B
Tried to reboot, reinsert drives...
Upoaded supportdata to:
https://rapidshare.com/files/2236386494/supportdata-BIS-STORAGE-02-21_2_2012-4_19.zip

Hi.
It's look like that new disk was used at array with FW 7.x and have new version of DACstore.
You can read
http://www.ibm.com/developerworks/forums/thread.jspa?threadID=340296&tstart=0#14528182
support.oracle.com : ID 1019666.1
For check:
Connect serial cable to array controller, set boudrate. Reseating one new disk.
message like:
08/25/08-17:50:45 (GMT) (ssmDriveSpinTask): WARN: Unsupported dacstore: dev = 0x1
means that is true.
Possible solution: Connect CSM200 directly to server and clear disk. ( dd for example).
For test - start with 1 disk and check.
After - Connect CSM200 back to 6140 and check this disk.
Regards.

GarageBand doesn't recognize my "one" mic.

THIS NEW VERSION OF GARAGE BAND!!!!!
IT DOESN'T RECOGNIZE MY "ONE" MIC AND QUITS EVERY TIME I TRY TO RECORD. I HAVE A RADIO SHOW AND CANNOT DO IT. I'M REALLY, REALLY, REALLY UPSET!!! CAN ANYONE HELP ME?
<Re-Titled By Host>

Judy,
when you installed GarageBand 10.0 the installer should have moved your GarageBand 6.0.5 to a subfolder in Applications. This version should still be working. If you are working on a tight schedule, use that GarageBand 6.0.5 version for the time being, to get your show done.
GargaeBand 10.0 seems to have a bug causing crashes, i.e. on 2007 models (iMac, MBP) and mid 2011 models. If you have one of these models, use GB '11, until there is a bug fix.
See: GarageBand 10.0 crashes
If you are using older drivers for Audio interfaces or are using plug-ins for custom instruments and sound effects, check with manufacturer's for compatibility with GarageBand 10.0 and Mavericks.
-- Léonie

FCP doesn't recognize VTR mode on HVX camera

I'm new to FCP7 and can't figure out why log and capture doesn't recognize the VTR mode on my Panasonic HVX. I turn on the camera, switch it to VTR (by pressing the MCR/VCR button) and the launch FCP with my MBP connected to the camera by FireWire. When I launch L&C and the click on the now button, I get a black screen that says the camera must be in VTR mode. Yet when I launch iMovie, the capture window will play and record the video on the camera just fine. The video is on a miniDV tape. I don't have a P2 card so can't try that method.

L&C! Did that work?
Works for you & I can do it from my MBP, but evidently not from my iPad. Weird.
OK...the thing you need to do first in FCP is choose the DV/NTSC Easy Setup. THEN try to capture from tape.
Yeah, did that first. I'll try again when I get home tonight.

My TV doesn't recognize my 2010 MBP

Similar Messages

Maybe you are looking for