My TV Model 32AV502RZ will not turn on

After a power outage last night my TV wouldn't turn on no matter what I did. I unplugged it for awhile, then plugged it back in that didn't work. I left it alone for hours and nothing happened. I tried holding down the Power button for a period of time still nothing. I would like to know what I have to do to get my TV to work ether there's something I'm not doing that I should or it needs to be repaired or it completely done and I need to get a new TV.

It sounds like it definitely needs to be repaired. The price would change depending on what damage has been done, so I can't say for sure how much it would be or if it'd be worth it to you.
- Peter

Similar Messages

Mid-2009 Macbook Pro will not turn on

Hi Folks,
so my mid-2009 15in Macbook Pro will not turn on. I updated the OS to Mavericks in December 2013. I'm from California, but I recently moved to the Guam/Marianas area where it is more humid and generally around 87 degrees F all day. For the past month my computer has worked fine, albeit I did notice the fan was running a little more than usual. I usually would just put it into sleep mode when I would finish using it (apparently a bad idea based off of reading other posts concerning humidity and, more importantly, heat). One day I finished using it, closed it and the next day went to open it; I could hear the fans start to work, but then it stopped. It hasn't turned on since. You press the power button and nothing happens. I tried all the troubleshooting stuff.
So, my question is this: what do you think is the problem? Moreover, how much do you think it could cost to repair it? My experience with computers suggests to me that it's probably a dead motherboard. I'm wondering if it's worth trying to salvage this thing or if it would be prohibitively expensive. There are no Apple stores in the area to take it in to get advice unfortunately.
Now, I just want to vent a little frustration. I have many apple products, and I've even switched my mother over to an apple computer, but now that I need some very basic support, apple doesn't provide a contact e-mail or a free chat? I think charging someone $19 for 'one time assistance' is ludicrous. I bet if I brought this into an apple store I could at least get some advice, and thus get some idea how I want to proceed with repairs or not. I suppose I'm also rather frustrated that my macbook, which I have been most happy with all these years, breaks because I go somewhere a little more humid and generally warmer? It would appear that the hardware failure is connected to the climate. This makes me skeptical about purchasing another mac if it can't handle a little humidity. (I have not spilled liquids on it, nor have used this computer while transitioning from an air-conditioned/humid location which could potentially cause condensation). I do not think I'm being unreasonable (yes I do think a $2500 computer should not fail after less than 5 years), but if you think I am unreasonable, please enlighten me.
Thanks for any help. I really appreciate it.
Ken

Ken,
the “Important Handling Information” in the little white manual that came in the box with your MacBook Pro states that its operating temperature range is from 50 °F to 95 °F (10 °C to 35 °C), and that its operating range of relative humidity is 5% to 90% (non-condensing). If your corner of the Pacific is outside of these ranges, the manual states that “Failure to follow these handling instructions could result in damage to your MacBook Pro”.
I have no idea what problem your MacBook Pro has; since you’ve tried all of the troubleshooting stuff, you’ll need to somehow get your MacBook Pro to a qualified service facility to diagnose the problem. If the logic board does need to be replaced, it would probably cost hundreds of dollars for a replacement, and you might find that purchasing a replacement used MacBook Pro of the same model to be price-competitive with just replacing your MacBook Pro’s logic board.
If you find Apple’s out-of-warranty policies unacceptable, then your only alternative to venting would be to purchase your next computer from a different company which has out-of-warranty policies more to your taste.

I bought 2 new memory card to 4 grams each - replace them in your MacBook Pro 13-inch but it will not turn on - If you are installing a card for 2 and one for 4 d all works - tell me what could be the problem

I bought 2 new memory card to 4 grams each - replace them in your MacBook Pro 13-inch but it will not turn on - If you are installing a card for 2 and one for 4 d all works - tell me what could be the problem

I assume that you have installed new RAM in your MBP.
It would be helpful if you indicated the EXACT model/year MBP that you have.
What the the RAM specifications that you are trying to install?
Ciao.

HP Touchsmart PC 520-1155 will not turn on

I have several Touchsmart PC 520-1155 that all appear to be suffering from the same issue. In short they will no longer turn on.
These computers were all purchased at the same time in late 2012, and now, one by one the stop turning on. I have read other forums where users are experiencing the same issue with this model.
It is often suggested that troubleshooting the Power Block / AC Adapter wil help, (see link below) however in this case the steps provided were not relevant.
I have tested the power block / AC adapter with computers that still continue to function and they work without questions, however the computers and the little green LED light will not turn on.
I have spoken with HP phone support and because these failures occurred outside of the manufactures warranty period it will cost up to $300.00 per machine to identify and potentially fix the machine allow them to turn on.
Has anyone identified the root cause of this issues?
Can anyone provide steps to fix?
Using and Testing the AC Power Adapter
www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00363266

I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Macbook Pro Early (2008) will not turn on!

I have same problem with my macbook pro early (2008)
I think is unfair to have this problems in the "perfect world notebook"
I hope you can help me on this
Regars,
Carlos.
---- MrAngel Discussion-----
Ok. It looks like does not matter what model is but anyway here is my specs:
Macbook Pro 15'
Model: A1260,
2.5 Ghz Core2Duo/2Gb/512 Mb Vram/250 GB 540RPM
I would like you review the following posts:
http://discussions.apple.com/thread.jspa?messageID=10071744&#10071744
My macbook pro won't turn on. I press the power button and the little light on the bottom goes white only while I hold it down, the second i don't it goes off. When I do hold it down for a few seconds first it will be solid for like 3 seconds then start flickering
http://discussions.apple.com/thread.jspa?messageID=10115278&#10115278
When i tried to turn on my mbp today it only turned on for like a second and then shuts off. The light on the front turns on and the battery is fully charged, but it just turns off in a second
http://discussions.apple.com/thread.jspa?messageID=10285598&#10285598
Hi, I have an Early 2008 Macbook Pro and I used it this morning but two hours later, I found it off. When I push the power button, the white light briefly comes on but it doesn't sound like it's starting up. When I hold the power button down, the white light comes on solid for about 5 seconds, then flashes rapidly. During this time I can hear the DVD drive and other components kick on, but once the rapid flashing stops, all power is lost again
The problem: Mac will not turn on.
1. If I hit the power button it is trying to start working (white light is blinking, HDD rotating, CD noise and so on), but gets shutdown as soon as I release my finger from the power button.
2. The maximum "Working" time is about 5 secs. During this time fans are working, white light is lighting, HDD working, CD does its usual noise. At the last two seconds white light starts flickering.
3. If I remove all memory slots it is working as usual!!!, I mean working without pressing a powerbutton constantly... and asking for a memory of course.
How it happened: well, it is usual thing then you are in hurry. Accidentally I hit restart. I didnt want mac to load again, so I did a force shutdown (5 secs an a power button). Thats it.
What I tried to do: I did all those "shaman" hotkeys to restart SMC. I spent a day!!! by driving around my city and asking Apple providers to fix it with no luck.
What I am planing to do:
1. I have an Apple service center here in the Tallinn who are ready to do some diagnostics. The only thing is - I dont trust them my HDD. So I am gonna clone my hard drive data somethere before they get my mac in their hands.
2. As soon as diagnistics is done I will get a price offer to fix it. It definitely wont be a cheap, since my mac is year and two months old (funny, two months and you are screwed).
3. If it will be too expencive I gonna do DIY repair.
What I would like to say to the Apple: please investigate that problem. The motherboard is definitely working. I can not fix it myself with no necessary equipments here, so I have to do expensive motherboard logic purchase.
Aleks

since my mac is year and two months old (funny, two months and you are screwed).
Not if you had of purchased Apple Care. You would have been covered for 3 years.
What I would like to say to the Apple:
This is not the place as Apple does not come to these forums.
These are user-to-user forums where everyday folk post "technical" questions and offer answers to each other voluntarily. No one here works for Apple nor does Apple get involved in responding. Not even sure if they "lurk."
"Say" it here -
Product Feedback

MacBook Pro A1260 will not turn on! Found some similar posts, got mine too.

Ok. It looks like does not matter what model is but anyway here is my specs:
Macbook Pro 15'
Model: A1260,
2.5 Ghz Core2Duo/2Gb/512 Mb Vram/250 GB 540RPM
I would like you review the following posts:
http://discussions.apple.com/thread.jspa?messageID=10071744&#10071744
My macbook pro won't turn on. I press the power button and the little light on the bottom goes white only while I hold it down, the second i don't it goes off. When I do hold it down for a few seconds first it will be solid for like 3 seconds then start flickering
http://discussions.apple.com/thread.jspa?messageID=10115278&#10115278
When i tried to turn on my mbp today it only turned on for like a second and then shuts off. The light on the front turns on and the battery is fully charged, but it just turns off in a second
http://discussions.apple.com/thread.jspa?messageID=10285598&#10285598
Hi, I have an Early 2008 Macbook Pro and I used it this morning but two hours later, I found it off. When I push the power button, the white light briefly comes on but it doesn't sound like it's starting up. When I hold the power button down, the white light comes on solid for about 5 seconds, then flashes rapidly. During this time I can hear the DVD drive and other components kick on, but once the rapid flashing stops, all power is lost again
The problem: Mac will not turn on.
1. If I hit the power button it is trying to start working (white light is blinking, HDD rotating, CD noise and so on), but gets shutdown as soon as I release my finger from the power button.
2. The maximum "Working" time is about 5 secs. During this time fans are working, white light is lighting, HDD working, CD does its usual noise. At the last two seconds white light starts flickering.
3. If I remove all memory slots it is working as usual!!!, I mean working without pressing a powerbutton constantly... and asking for a memory of course.
How it happened: well, it is usual thing then you are in hurry. Accidentally I hit restart. I didnt want mac to load again, so I did a force shutdown (5 secs an a power button). Thats it.
What I tried to do: I did all those "shaman" hotkeys to restart SMC. I spent a day!!! by driving around my city and asking Apple providers to fix it with no luck.
What I am planing to do:
1. I have an Apple service center here in the Tallinn who are ready to do some diagnostics. The only thing is - I dont trust them my HDD. So I am gonna clone my hard drive data somethere before they get my mac in their hands.
2. As soon as diagnistics is done I will get a price offer to fix it. It definitely wont be a cheap, since my mac is year and two months old (funny, two months and you are screwed).
3. If it will be too expencive I gonna do DIY repair.
What I would like to say to the Apple: please investigate that problem. The motherboard is definitely working. I can not fix it myself with no necessary equipments here, so I have to do expensive motherboard logic purchase.
Aleks
Message was edited by: MrAngel
Message was edited by: MrAngel
Message was edited by: MrAngel
Message was edited by: MrAngel

Hi rightturn,
Thanks for replying.
I am still not sure about the success story. According to the http://www.xlr8yourmac.com/feedback/MacBookProvideofailure.html topic and comments you have to have "chime" sound and numlock (or capslock ???) button to work. Those two are the main criterias to pass the nvidia failure test.
Another thing is the USB which is should be powered on as well.
As you could see on the youtube video this macbook does not have chime, and keyboard seems does not work too.
So... will see what happens next after the weekends I am gonna call them for an updates.

Monitor will not turn on

After years of good service, my monitor will not turn on when I turn on the MacPro.

I am sorry to hear that.
Tell us some model numbers for your display, your display card, which Mac Pro, and stuff like that and Readers would love to speculate on what the most likely problem (and maybe even solutions) might be.

TS1363 My ipod will not turn on at all. When I connect it to the laptop by the USB, it does not recognize it at all. What could possibly be the problem? The Nano was working like 30 minutes ago.

About 30 minutes ago, I was adding some music to the ipod Nano. Everything was working fine. Now, the ipod will not turn on at all. When I connect it to the laptop with the USB, the computer does not even recognize it. The screen has a fant image of the plug on it and it says connected. I followed the procedures for disconnecting it when I was finished with it earlier. Any idea what is going on here???
Thanks

It probably needs to be reset. The procedure is different for different Nano models: http://www.apple.com/support/ipodnano/assistant/itunes/

My MacBook Pro will not turn on, bought a new charge still no power, My MacBook Pro will not turn on, bought a new charge still no power

My MacBook pro will not turn on bought a new charger and it still will not turn on

Then your problem isn't with the charger/adapter. Which model MacBook Pro do you have (e.g., "15-inch Late 2011")?
It's likely that you'd be best served by taking your machine into your local Apple Store or AASP and having the Apple techs run diagnostics. The diagnosis and estimate to repair should be free.
Clinton

HP Pavilion 23 will not turn on- can hear fan, power light is on, nothing on screen

HP Pavillin 23 will not turn on/power up???.
When we press the power button:
- can hear fan
-power light on back of computer is lit (where power cord is plugged in)
-power light on top of computer is lit
-but nothing happens with the screen. No light at all, no screen at all; it remains black.
Help please!
Thank you so much!

It is important to know the exact model #, and current OS of this AIO. Just saying 23 is like owning a Chevy.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Any suggestions for iPhone 4 that got wet in the washer and will not turn on?

Any suggestions for iPhone 4 that got wet in the washer and will not turn on?

davga wrote:
Any suggestions for iPhone 4 that got wet in the washer and will not turn on?
Get a new phone, either by buying the latest model or getting an OOW replacement and you will receive one like the one you have now.

G5 iMac Will Not Turn On - Power Supply Diagnosis?

My A1145 20" iSight PPC G5 iMac will not turn on - it doesn't respond to the power button. It had been shut down for a few days, I turned on the power and it booted up as normal, the desktop appeared and I was about to open the web browser when it suddenly went dead; the screen immediately turned off with no warning or noise. There is no fan or disk noise coming from it when the power lead is plugged in, just a very, very faint electronic hum from inside.
From reading various webpages, it seems possible that the power supply could have failed. Is there a simple way that I can diagnose this before deciding whether to attempt to replace it myself or not? I understand that there should be some diagnostic LEDs which could help identify a problem - I've removed the surround from the iMac and peeled back the black EMI film below the display but I'm not sure for what or where I should be looking (they seem to be easier to find on the 17" models).
Whilst I know a repair might not be cost-effective on such an old machine, I have 220GB of photographs, documents and music on it - none of which is backed-up - so I am very keen to get it working and backed-up as soon as possible.
Could anyone suggest how to diagnose the problem?

Hi there:
My experience with Macintosh computers has not included the G5 iMac even though I almost got one to replace a failed-under-AppleCare iMac G4 17" 1.25GHz after three/four major failures and no local support.
...So, I think you may be able to pull the hard disk drive out of that computer and see if an external enclosure could allow you access those files IF the drive spins up at all. Sometimes odd things happen, and the G5 iMac had some history of capacitor and other failures that could be a problem. I see there are a few free information guides here that may be helpful: http://www.ifixit.com/Device/iMac_G5
If the battery on the logic board was dead, but the computer kept in running condition by leaving it plugged in, once the computer was left unplugged for a time then the device may fail to start. There is a way to reset the power management chip (different names for same idea as technology moved forward) and that could help in the process of troubleshooting most power related issues in the PPC Macs of later G3/G4/G5 design.
There are troubleshooting items of interest in here http://www.apple.com/support/imac/g5/ ie: what to do when your computer won't turn on...
Sorry to not be of direct help in this matter.
Good luck & happy computing!

My Laptop will NOT turn on!!! please help!

My Toshiba Satellite L305D-S5892 will not turn on. It has been this way for almost a month. I had left my computer on while going to the bathroom and when i came back it was turned off. I tried turning it on but it wouldn't. The battery light and the charger light were both green, and the power light is very dimly green. My sister has the same exact laptop as i do, so i tried exchanging the chargers, but it didn't help. I tried exchanging the batteries, which didn't help. I tried letting both batteries sit out for a while then put it back in, but it still wouldn't turn on. I have tried holding down the power button to turn it on, but no matter how hard or how long i hold it down it won't turn on. My dad thought it may be the battery connection but i have no idea, and it is currently just out of the 1 year warranty as it was bought black friday of last year. PLEASE HELP!! PLEASE!....thank you

Unplug the AC adaptor, remove the battery, then press and hold the power button down for a minimum of 30 seconds. Now replace the battery and see if it powers up. If not repreat the process but this time leave the battery out and only plug in the AC. If it still doesn't power on repeat the process again and this time replace the battery and plug the AC back in. If it still doesn't power up it's time to start checking the hardware. Remove the ram and try it with only one stick. You might need to try each one individually to see if either works. If that doesn't help remove the hard drive and see if it will post to the Toshiba screen. If that doesn't help you'll probably need to take it to a service center.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Iphone 4 will not turn on with or without charger. Lock/sleep button is broke. Itunes will not identify phone.

My Iphone 4 shut off randomly last night while charging. It will not turn on with or without charger (I have tried multiple working outlets and usb ports. Didn't work)
The lock/sleep button is broke (I tried pushing it down on multiple surfaces as hard as I could while holding the home button. Didn't work.)
My Itunes will not identify the phone is hooked up to the computer (my itunes is completely up to date. I tried all the methods of pressing down the home button and pluuging in the usb chord while Itunes is running.Tested my roomates Iphone 4 with my chord and it charged and Itunes identified it. Tried his chord as well. Didn't work.)
All the advise I can find in these communities involves using the phone. The screen is black completely black no matter what I do. It makes no noise either (called it several times) I have read about 15 different posts on here and tried every method I found more than once. Do I just need to take it in?

Slugsworth wrote:
Do I just need to take it in?
Apple won't repair it, they just offer you an out of warranty replacement, cost is US $149. Me? I wouldn't spend that kind of money on a discontinued model. I'd sell it for parts on eBay or go to a third-party repair shop. Be aware, if you go the third-party repair shop route, you forfeit all support from Apple, including the right to an out of warranty replacement.

My MacBook Air will not turn on. I get a white screen with the apple logo and a spinning star that just does that for hours

My MacBook Air will not turn on. I get a white screen with the apple logo and a spinning star (search icon). It will spin for hours and never go away unless I power off.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My TV Model 32AV502RZ will not turn on

Similar Messages

Maybe you are looking for