My tv screen is blank
I baught all the cables and connected my iPad 2 to my tv Sony Bravia played something on you tube and got the message that it is connected and playing on my tv but the tv had a blank screen what am I doing wrong
You need to restore via iTunes
Make sure steps are followed exactly (remove all cables, connect micro USB. If using a 3rd gen reconnect power. Connect directly to computer. Try a different cable
Restore your Apple TV (2nd and 3rd generation) - Apple Support
Similar Messages
-
I just recently bought IPAD2....Whenever i inserted my microsim into sim tray, the screen goes blank with only apple logo to show...It does not start till i remove the sim and press both Home and Power buttons simulataneously...Can somebody help what shall i do????
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
When I am on a phone call and I double click the button to go to my home screen, then open another application (usually my calendar program, Calengoo), my screen goes blank and I am not able to return to either the app, the phone, or the home screen. If I am speaking to a person, if they hang up then I am back to the phone application. If I'm leaving a message, I am unable to return to the phone screen to end the call, and have to wait until the other phone hangs up. I'm also unable to switch back and forth to look at my calendar if I'm calling someone about scheduling. This has only started happening since the most recent iOs update. I run into situations similar to this about once per day during the work week, as I use my phone is this manner quite often. While not life altering it is quite frustrating. Can anyone here help me figure out a way to avoid this? If it helps, I have noticed a general downgrade in overall performance starting two system updates ago (apps opening more slowly, closing unexpectedly more often, etc.). I have an iPhone 3GS with the latest OS update.
Thank you for any help or suggestions,
ChrisI could be corrupted backup.
You can check the notification settings for message.
Settings>Notification Center>Messages>Alert Style
It should be on Banners or Alerts.
Settings>Messages> Turn on Imessage and send as SMS and below that "Blocked" to check if you have any numbers block might be blocking the message.
You can also do a hard reset by holding power and home till it restarts and release after seeing the apple logo.
Still doesn't work? Settings>General>Reset>Reset all settings -
I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords and it doesnt recognize it . It says it is in recovery mode and i need to restore . after clicking restore it says that my iphone cannot be restored . I am very frustrated because i have been online searching for solutions all day and nothing seems to work . As soon as i turn on my phone it goes to the apple logo for about 2 seconds then the connect to itunes screen . SOMEBODY PLEASE HELP ! my phone is my life and i need it back on .
Connect the device to iTunes and restore from the most current backup.
If the issue continues, restore as new. -
My Mac's screen is blank white when starting up...Help!
This afternoon my web browser suddenly did not response. I had to shut down the computer by holding the power button.
Then I restarted up my Mac and the screen became blank gray, and then a flashing question mark.
Did some research, found a solution and followed: http://support.apple.com/kb/TS1440.
I met a trouble on the fourth step: Click the First Aid tab. The "repair disk" button is unavailable. After clicking the "verify disk permissions", First Aid failed because of "no valid packages".
Then, I tried to install Mac OS X. However, no destination volume showed up in "select a destination" page.
At this time, I feel exhausted and disappointed>_<. People here are so nice, so I am looking for some advices: what is my Mac's problem? How to fix it? Thanks a lot!Hi,
Recently i also got this flashing question mark error. The apple told me that its an Internal HD error.
Well how common is that with the macbook ?
The apple did changed my Internal HD ( for free). New one - Hitachi. I also have backup on my External HDD where the latest backup was 2 weeks before my Intenal HD crashed.
Is it safe to do the system restore completely on my new internal HD without causing any new problems ? As i have heard that the complete system restore can give lot of trouble.
And one more question, after getting repair, am I eligible to apply for Apple Care protection Plan ?
My warranty expires on 26th January 2010.
Thank you
Milan -
When I search a music artist in the itunes store and then click to view all albums the screen is blank. Why is itunes store not showing me all of the Albums?
This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode -
My App Store shows 3 updates but when I go to it the screen is blank. It will not give me the option to update all or one at a time, it doesn't show the apps at all.
Many people are having this problem for the last couple of days. This is a problem that Apple has to fix. If you look around the forum, you will see many, many discusssions about this and they have been going on for a few days.
According to Fly150 in another discussion, this is a workaround - for the time being.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store. -
Screen Goes Blank, Hard Drive Stuck, Cannot Re-Install, or recover
I have somewhat a bizzar problem that even with several years of IT experience I seam not to be able to figure it out. I thought I toss it our here at Toshiba community in hopes of people's collective experience shedding some lights on my problem.
I hava a 3 year old Toshiba Sattellite A305D with updated BIOS to version 2.10. It came with Windows Vista Home 32bit and I had upgraded it to Windows 7 64-bit last Christmas. It was working fine till last month that I started getting sporadic blank screens. Here is the symptome with details: screen goes blank, backlight it on, but there is no content on screen. At this time the Hard Disk Drive activity light is steady lit. Initially the problem happened intermitently and sometimes it fixed itself after few minutes and screen would come back on, but when it started to happen more often, I started to look for some troubleshooting. Some people suggested that blank screen could be due to bad lid close button being stuck or Windows power management's CPU power being set to 5%. I have tried cleaning the lid button and fixing power management but no luck. Then, I tried re-installing Windows from DVD, screen never went blank till after the first few steps of setup to the point that it says "Extracting Windows Files". At this time I started to think this is a hardware issue. I took out the RAM, I installed it on my MacBook Pro and used it for few days, and I had no problem. I even diagnosed them with Windows Memory Checker in the list of Recovery Options and no problem was detected. So, the next suspecious thing was the video card or display inverter. I tried connecting the laptop to an external monitor to test the screen's inverter, and same thing happened and external monitor went blank. I used Windows Recovery options and left it on that screen over night and nothing happened so I concluded the video card is fine. Next, I had turned off the Wifi and Lan, but nothing seamed to change, so I concluded those are OK as well. My last coclusion was that the hard drive is bad. I took the drive out and coonected it to my Desktop PC and ran disk utiility scan to check for bad sectors and none was detected. So, I thought the drive might be totally broken. I went to local electronics store and bought a brand new HITACHI SATA II drive and installed it. At first same thing happened so I gave up. Since I didn't have the recovery disks, I ordered recovery disks from Toshiba and tried that. Save thing happend and as soon as it started copying files, it blanked out. OK. So this time I ran a different recovery option and formatted the entire hard disk and zeroed out all sectors. That took approximately 3 days to finish for a 500GB brand new hard drive. Seams a long time.After that I could install Windows 7 64-bit from scratch up to the end. However, things got gorry again when I started installing Updates and driver packages. I had read about some problems with ATI drivers and Catalyst software with .NET updates, so I did not install any driver from update site and made sure all .NET updates are installed. I had to install the updates slowly chosing a few at a time. Otherwise same thing would happen. I got stuck to the point that I could not update anything. Windows files seamed to be corrupt and turning on/off Windows Features in controll panel was blank, so I had to re-install again. I did Re-install successfully using the upgrade option. This time I installed .NET updates first before any other updates. Then I started downloading all Toshiba drivers. Aazingly, the laptop worked for few ours without the symptom. I managed to install most of the drivers and updates including Value Added Package, HDD/DVD Rom Patch, Registry Patch, Sound, Modem, Atheros Wireless, and Catalyst. Up till now things were ok. Then I ran Toshiba Hardware update patch, and things got really messed up. Windows never booted again and symptoms showed right after boot tried to load WIndows. I tried recovery options but System restore kept getting errors too and I could not restore any more. Since Windows 7 Install and Windows Vistal recovery to Factory Default from recovery disk did not work, I thought maybe I should try Windows XP. So, I got a hold of my old Windows XP CD-ROM and I took a stab at it. Everything went fine till it started to copy windows files. This time symptom was different. I got one of those XP Blue Screen of deaths saying Hard Drive is bad and I must run chdsk /F. So, I concluded HDD is the problem. Ran CHDSK and no problem. I formated the drive again using DISKPART and the problem still exists. This is a brand new hard drive. What is the problem?Please include your full model number when posting problems on the forums. It can be found on the bottom of your laptop. "A305D" is only partial.
That's quite the problem. How often was it doing this? At some steps in your diagnosing, it seemed to get better, but I wonder if it was actually (temporarily) fixed, or if it didn't occur by chance.
Unfortunately I don't have an answer for you. Normally I'd suggest you get it serviced, but then you'd also be throwing more money at a three year old notebook when clearly you're knowledgeable yourself.
Hopefully someone in the community will have some suggestions. I have noticed that some people shy away from posts with large paragraphs of text. (I'm not saying that's correct, but it happens.) I'd suggest putting some bullet points at the top summarizing. If you feel like doing that, you can edit your message.
Good luck!
- Peter -
I downloaded a tv show from the iTunes store . I started to play it and put it on pause and then when I tried to play it later the screen is blank. Other downloaded shows will play but not that one...please help.
How to report an issue with Your iTunes Store purchase
-
Unmountable Boot Volume on XP and screen goes blank before repair begins
The XP Windows partition was seemingly working fine until I turned on the laptop this afternoon. Took a minute or so longer to boot than usual and I was prompted when it did load to update Acrobat, which I did and it rebooted. Took longer to boot, perhaps two or three minutes and I received an Unmountable Boot Volume error. I rebooted a few more times, same result. I tried system restore to three previous dates over past ten days and was told after attempted reloading that it had failed and I should try another day. Worried about my data, I went to safe mode to back up C: drive.
The general advice from MS is to use the Windows installation CD to repair the boot sector. With the CD in, Windows will boot and show my normal desktop and files, though will on perhaps the third item to load to memory, the screen goes blank and the loading seems to continue, as I hear sounds though not sure if it is the programs or the repair.
There does seem to be an ability for it to boot, just not maintain it through full load. Any suggestions short of reinstalling windows would be welcomed. Thank you.I was unistalling some usless programs when my laptop died & when I turned it on I had unmountable boot volume 0x000000ED (the blue screen)
If I hit repair windows it goes to a black screen with the mouse (nothing else)
Now I tried f8 & then did command prompt but after it had gone to the loading files screen it had gone back to the blue screens with unmountable boot volume 0x000000E
I DL windows 7 repair but how do I get it to install when I cant get past the blue screen?
so i decide to repair it my self and then i found this great solution what helps me -
Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?
Yes, your battery is likely toast and in need of replacement. Not much else for troubleshooting here. Sorry.
B-rock -
My IPAD has a blank screen. It is on and working because I can hear the ping of my emails arriving. I turned off and on as best I could which is tricky as the screen is blank. I synced with itunes and checked for updates. All ok.
Screen is still blank.
I can reset the ipad but I did this a month or so ago and it took forever and it lost all of my music which then took forever to get back on properly.
SO If I can avoid this I would.
Any help would be so appreciated!!
ThankyouTry reset iPad (not Restore)
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
IPod Nano Screen is blank and dosen't turn on or off.
I leave my ipod nano on for 2 seconds. Screen turns blank and dosen't turn on or off. iTunes dosen't recognize it. Nothing I do works. Charging dosen't work. iPod, however seems to be on sleep mode.
After leaving the iPod to charge for a minimum of at least 30 minutes, have you tried a hard reset of the device? To do this, make sure the hold switch along the top is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock -
I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
i locked my Ipod 1st generation in zombie farm went to the toilet came back tried to unlock it but i cant screen was blank i have tried everything please help
If you have tried everything, then by definition, there is nothing else to try.
Perhaps if you explained what you tried someone can help.
If you have actually tried everything, then there is nothing anyone can do to help.
Did you try reset?
iPod touch User Guide (For iOS 4.3 Software) -
Screen become blank during the Manual Target Group creation
Hi SAP,
In the Marketing Segmentation, there is an option to allow the manual Target Group creation. I have a list of 5000 BP and I upload it via "Import Business Partner". It is just 5krecords and the screen goes blank. We have tried several times and encountering the same thing which there is no enhancement applied. Any idea if there is limit on BP to be uploaded?Hi Subhashish,
High Volume Segmentation is recommended for segmentation activities for more than 500.000 BPs. In your case Classic Segmentation fits perfectly.
Please read the SAP documentation for more information:
Segmentation - SAP Library
Furthermore since the Import Business Partner functionality is not Java based this cannot be a Java problem.
Do you receive a dump in transaction "st22" after trying the import?
Regards,
Markus
Maybe you are looking for
-
Is possible to have a script that makes a text randomly have caps and lower caps... i would love to create a kind of effect so it would look like manuscript - but it cannot be only the same letter in caps or lower caps - I wOuld NeEd oF SOmeTHing Lik
-
Why isn't there any complete video editor in the N...
Hi! Got a bit disappointed in my N86 when i discovered the very very poor "video editor", in which you can put in a sound, text either in the beginning or in the end, and stitch together videos. I find this very poor compared to my N95 video edito
-
Flash CS3 timeline display problems
I have just upgraded to Flash CS3 and immediately noticed a problem when viewing and working with the Timeline window. When I click on a frame (keyframe or other) it highlights that frame completely white, which means I can no longer tell what type o
-
Report results of test in different step
Hello All, I have a section of a test sequence that loops through several iterations while looking for an acceptable result. The only result I am interested in is the passing result (or the last iteration if a passing result is not found). I've tr
-
Logical port error (WS_LOGICAL_PORT) when consuming WS in PI
Hi All, I am trying to integrate simple Currency Conversion Web Service witm my ECC program. Program displays two fields in the selection screen (Currency From and Currency To) WS is: http://www.webservicex.com/ws/WSDetails.aspx?WSID=10&CATID=2 The s