My two finger scroll is not working

My two finger scroll does not work on Firef

hey natchilds, try to switch off smooth scrolling in preferences > advanced > general

Similar Messages

Two finger scrolling does not work on my MacBook (late 2008)

Two finger scrolling does not work on my MacBook (late 2008) with either the notebook trackpad or a b/t conected magic trackpad. Yes, I've set system preferences. Suspect a driver or s/w problem. Ideas?

Saw another post that hinted that you need to go to accessibility settings:
System Preferences > UniversalAccess > Mouse & Trackpad > Trackpad Options
Enable scrolling (and I enabled dragging while I was at it and it worked. Looks like wierd things can get set even if you don't mean it to.

MB Air two finger scroll does not work for a user but does for another

Hi
MB Air. 10.9.3.
Defective Trackpad was just replaced. Two finger scroll does not work for the main user. I made a test log in and two finger scroll works. I booted off an external drive and two finger scroll works.
I pulled all of the user preferences out, logged out and in and still does not work. Zapped PRAM. Checked all trackpad settings. No luck.
Tried this in Terminal:
defaults write -g com.apple.trackpad.scrollBehavior 2
Any ideas?

This sounds strange but check the settings in Settings>Accessability for the track pad. I belive your problem lies there not in Track Pad set up in Settings.

Two finger scrolling does not work ONLY on Firefox

This just started today, suddenly my two finger scrolling doesn't work but only when I'm in Firefox, offline and on Safari and Chrome it's fine. Restarting Firefox only fixes it for a few minutes, then it stops working again. All of the suggestions I've found that I've tried haven't worked, please if anyone could help and also break it down fairly easily, I'd really appreciate it.

''guigs2 [[#answer-674567|said]]''
<blockquote>
Does this happen in Safe Mode?
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
:[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
</blockquote>
The same issue happens on Firefox 35.0 running in safe mode, Mavericks 10.9.5, both with Magic Mouse and normal standard mouse...
It's unbeliaveble this issue is going on since more than one year ago, I can find people complaining about it since December 2013!
Oh, one more thing: I don't have a two finger swipe configuration, I have single finger swipe, so the actual problem is about scrolling the page in itself (considering I've tested it with a normal standard mouse as well....).

Satellite C50-B-14D - Two finger scroll is not working

I have had my laptop for about 6 months now and am generally happy with it. However, the two finger scroll has stopped working (it was working fine when I got it and for a while after). I know it's not essential, but it makes such a difference for the work I end up having to do, which often involves copying and pasting etc, and I really miss it!
I've read many threads saying that you should go to Control Panel, click on Mouse and go to device settings. However when I get to that point, my Mouse box just says "buttons; pointers; pointer options; hardware" and there is no "device settings" panel along the top. What can I do? I also can't find the synaptics driver anywhere to uninstall it, as some other people have suggested.

Obviously this additional touchpad feature isn’t available because the touchpad driver isn’t installed.
I recommend you to visit the Toshiba EU driver page and to download the touchpad driver for this notebook model.
I’m not quite sure what touchpad module this notebook supports (Synaptics or ELAN) but I think you could try to check both drivers.
If one would not work, check the other one…
After that you should see the additional tab within control panel -> mouse

Two finger scroll down not working on touchpad

Hi,
The two finger scroll function on the touchpad is not working.
The driver is updated as well.
Overall the touchpad seems unresponsive as well. It gets stuck and cursor stops moving. It is the only thing that I am not happy with regarding the spectre x360.
Can you please help.
Thanks

Hello @ukx360 ,
Thank you for visiting the HP Support Forums and Welcome. I have read about your HP Spectre x360 Notebook and mouse freezing. Here is a document on how to troubleshoot the mouse and Touchpad sensitivities.
If you will go to the section on Adjusting TouchPad, you will see a restore defaults button. If you select that it will restore the original settings.
Hope this fixes things up.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Two finger scrolling does not work on Synaptics touchpad + clicking problems in web browsers

Hello, Since yesterday, i have problems with my synaptics touchpad on my HP Elitebook 8570w.The two finger scrolling and scrolling at the edge of the pad does not work.Also in google Chrome, all the links open in a new tab and when i try to click the new tab, it closes (normally that is the action when i click it with the middle touchpad button) Even in the practice mode of the synaptics settings of the touchpad, the two finger scrolling and edge scrolling does not work. Both options are enabled in the settings. I already tried to roll back the driver and reinstall the driver, without any effect.I expect the problem is the touchpad or the buttons itself. Is there a way to test the buttons and touch pad? How can i solve this problem? please help me sincerely, Karel

I would try installing the Windows 8.1 (64-bit) Synaptics touchpad driver available in your sleekbook's web support download section before using compatibility mode. Try the available earlier versions if the current driver does not work for you.
If you still do not have positive results, then use compatibility mode (choose Windows 8) on all three Windows 8.1 synaptics touchpad drivers, starting with the most current one.
To use compatibility mode to install the driver softpaq just right click on the file and choose troubleshoot compatibility. Choose Windows 8 and run the installer.
The following video has a decent explanation, but the narrator does not get to the point for a bit. Skip forward to minute 4 and watch it from there.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

My two finger scrolling is not working for my hp envy 4 1017nr

my hp envy 4 1017nr touchpad has stopped responding. the tapping , two finger scolling and edge scrolling has all become non responsive. I have reinstalled the synaptics driver but the problem still persists.

Hi abbhey,
Take a look at this document and let me know if the troubleshooting steps help to resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

[SOLVED]Two finger scrolling/tapping stoped working after xorg update

Hi everyone, i updated my system yesterday to the new xorg server (1.11.1-2). Everything works except for the two finger scrolling on my synaptics touchpad.
There is some info:
Kernel: 3.0.6-2 (stock)
Synaptics Touchpad driver: 1.5.0-1 (lastest)
Right side scrolling works fine, two or three finger tapping doesn't work either.
Here's my Xorg.log:
[ 172.989]
X.Org X Server 1.11.1
Release Date: 2011-09-24
[ 172.989] X Protocol Version 11, Revision 0
[ 172.989] Build Operating System: Linux 3.0-ARCH i686
[ 172.989] Current Operating System: Linux Xenogears 3.0-ARCH #1 SMP PREEMPT Fri Oct 7 10:11:05 UTC 2011 i686
[ 172.989] Kernel command line: root=/dev/sda2 ro quiet fastboot init=/sbin/e4rat-preload
[ 172.989] Build Date: 10 October 2011 08:49:15AM
[ 172.989]
[ 172.989] Current version of pixman: 0.22.2
[ 172.989] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 172.990] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 172.990] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 13 13:27:22 2011
[ 172.990] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 172.990] (==) No Layout section. Using the first Screen section.
[ 172.990] (==) No screen section available. Using defaults.
[ 172.990] (**) |-->Screen "Default Screen Section" (0)
[ 172.990] (**) | |-->Monitor "<default monitor>"
[ 172.990] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 172.990] (==) Automatically adding devices
[ 172.990] (==) Automatically enabling devices
[ 172.991] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 172.991] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 172.991] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 172.991] (II) Loader magic: 0x8228580
[ 172.991] (II) Module ABI versions:
[ 172.991] X.Org ANSI C Emulation: 0.4
[ 172.991] X.Org Video Driver: 11.0
[ 172.991] X.Org XInput driver : 13.0
[ 172.991] X.Org Server Extension : 6.0
[ 172.992] (--) PCI:*(0:1:5:0) 1002:791f:1631:c108 rev 0, Mem @ 0xc0000000/268435456, 0xfd8f0000/65536, 0xfd700000/1048576, I/O @ 0x00008800/256
[ 172.992] (II) Open ACPI successful (/var/run/acpid.socket)
[ 172.992] (II) LoadModule: "extmod"
[ 172.993] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 172.993] (II) Module extmod: vendor="X.Org Foundation"
[ 172.993] compiled for 1.11.1, module version = 1.0.0
[ 172.993] Module class: X.Org Server Extension
[ 172.993] ABI class: X.Org Server Extension, version 6.0
[ 172.993] (II) Loading extension MIT-SCREEN-SAVER
[ 172.993] (II) Loading extension XFree86-VidModeExtension
[ 172.993] (II) Loading extension XFree86-DGA
[ 172.993] (II) Loading extension DPMS
[ 172.993] (II) Loading extension XVideo
[ 172.993] (II) Loading extension XVideo-MotionCompensation
[ 172.993] (II) Loading extension X-Resource
[ 172.993] (II) LoadModule: "dbe"
[ 172.993] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 172.993] (II) Module dbe: vendor="X.Org Foundation"
[ 172.993] compiled for 1.11.1, module version = 1.0.0
[ 172.993] Module class: X.Org Server Extension
[ 172.993] ABI class: X.Org Server Extension, version 6.0
[ 172.994] (II) Loading extension DOUBLE-BUFFER
[ 172.994] (II) LoadModule: "glx"
[ 172.994] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 172.994] (II) Module glx: vendor="X.Org Foundation"
[ 172.994] compiled for 1.11.1, module version = 1.0.0
[ 172.994] ABI class: X.Org Server Extension, version 6.0
[ 172.994] (==) AIGLX enabled
[ 172.994] (II) Loading extension GLX
[ 172.994] (II) LoadModule: "record"
[ 172.994] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 172.994] (II) Module record: vendor="X.Org Foundation"
[ 172.994] compiled for 1.11.1, module version = 1.13.0
[ 172.994] Module class: X.Org Server Extension
[ 172.994] ABI class: X.Org Server Extension, version 6.0
[ 172.994] (II) Loading extension RECORD
[ 172.994] (II) LoadModule: "dri"
[ 172.994] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 172.995] (II) Module dri: vendor="X.Org Foundation"
[ 172.995] compiled for 1.11.1, module version = 1.0.0
[ 172.995] ABI class: X.Org Server Extension, version 6.0
[ 172.995] (II) Loading extension XFree86-DRI
[ 172.995] (II) LoadModule: "dri2"
[ 172.995] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 172.995] (II) Module dri2: vendor="X.Org Foundation"
[ 172.995] compiled for 1.11.1, module version = 1.2.0
[ 172.995] ABI class: X.Org Server Extension, version 6.0
[ 172.995] (II) Loading extension DRI2
[ 172.995] (==) Matched ati as autoconfigured driver 0
[ 172.995] (==) Matched vesa as autoconfigured driver 1
[ 172.995] (==) Matched fbdev as autoconfigured driver 2
[ 172.995] (==) Assigned the driver to the xf86ConfigLayout
[ 172.995] (II) LoadModule: "ati"
[ 172.995] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 172.995] (II) Module ati: vendor="X.Org Foundation"
[ 172.995] compiled for 1.11.0, module version = 6.14.2
[ 172.995] Module class: X.Org Video Driver
[ 172.995] ABI class: X.Org Video Driver, version 11.0
[ 172.995] (II) LoadModule: "radeon"
[ 172.996] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 172.996] (II) Module radeon: vendor="X.Org Foundation"
[ 172.996] compiled for 1.11.0, module version = 6.14.2
[ 172.996] Module class: X.Org Video Driver
[ 172.996] ABI class: X.Org Video Driver, version 11.0
[ 172.996] (II) LoadModule: "vesa"
[ 172.996] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 172.996] (II) Module vesa: vendor="X.Org Foundation"
[ 172.996] compiled for 1.10.99.902, module version = 2.3.0
[ 172.996] Module class: X.Org Video Driver
[ 172.996] ABI class: X.Org Video Driver, version 11.0
[ 172.996] (II) LoadModule: "fbdev"
[ 172.997] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 172.997] (II) Module fbdev: vendor="X.Org Foundation"
[ 172.997] compiled for 1.10.99.902, module version = 0.4.2
[ 172.997] ABI class: X.Org Video Driver, version 11.0
[ 172.997] (II) RADEON: Driver for ATI Radeon chipsets:
********************LOTS OF VIDEO CARDS*******************************
[ 173.004] (II) VESA: driver for VESA chipsets: vesa
[ 173.004] (II) FBDEV: driver for framebuffer: fbdev
[ 173.004] (++) using VT number 8
[ 173.015] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 173.015] (II) [KMS] Kernel modesetting enabled.
[ 173.015] (WW) Falling back to old probe method for vesa
[ 173.015] (WW) Falling back to old probe method for fbdev
[ 173.015] (II) Loading sub module "fbdevhw"
[ 173.015] (II) LoadModule: "fbdevhw"
[ 173.016] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 173.016] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 173.016] compiled for 1.11.1, module version = 0.0.2
[ 173.016] ABI class: X.Org Video Driver, version 11.0
[ 173.016] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 173.016] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 173.016] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 173.016] (==) RADEON(0): Default visual is TrueColor
[ 173.016] (==) RADEON(0): RGB weight 888
[ 173.016] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 173.016] (--) RADEON(0): Chipset: "ATI Radeon X1200" (ChipID = 0x791f)
[ 173.016] (II) RADEON(0): PCI card detected
[ 173.016] drmOpenDevice: node name is /dev/dri/card0
[ 173.016] drmOpenDevice: open result is 9, (OK)
[ 173.016] drmOpenByBusid: Searching for BusID pci:0000:01:05.0
[ 173.016] drmOpenDevice: node name is /dev/dri/card0
[ 173.016] drmOpenDevice: open result is 9, (OK)
[ 173.016] drmOpenByBusid: drmOpenMinor returns 9
[ 173.016] drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
[ 173.017] (II) Loading sub module "exa"
[ 173.017] (II) LoadModule: "exa"
[ 173.017] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 173.017] (II) Module exa: vendor="X.Org Foundation"
[ 173.017] compiled for 1.11.1, module version = 2.5.0
[ 173.017] ABI class: X.Org Video Driver, version 11.0
[ 173.017] (II) RADEON(0): KMS Color Tiling: enabled
[ 173.017] (II) RADEON(0): KMS Pageflipping: enabled
[ 173.017] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 173.190] (II) RADEON(0): Output VGA-0 has no monitor section
[ 173.190] (II) RADEON(0): Output LVDS has no monitor section
[ 173.356] (II) RADEON(0): EDID for output VGA-0
[ 173.356] (II) RADEON(0): EDID for output LVDS
[ 173.356] (II) RADEON(0): Manufacturer: AUO Model: 8174 Serial#: 0
[ 173.356] (II) RADEON(0): Year: 2006 Week: 1
[ 173.356] (II) RADEON(0): EDID Version: 1.3
[ 173.356] (II) RADEON(0): Digital Display Input
[ 173.356] (II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 173.357] (II) RADEON(0): Gamma: 2.20
[ 173.357] (II) RADEON(0): No DPMS capabilities specified
[ 173.357] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 173.357] (II) RADEON(0): First detailed timing is preferred mode
[ 173.357] (II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
[ 173.357] (II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 173.357] (II) RADEON(0): Manufacturer's mask: 0
[ 173.357] (II) RADEON(0): Supported detailed timing:
[ 173.357] (II) RADEON(0): clock: 71.1 MHz Image Size: 331 x 207 mm
[ 173.357] (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
[ 173.357] (II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
[ 173.357] (II) RADEON(0): Unknown vendor-specific block f
[ 173.357] (II) RADEON(0): AUO
[ 173.357] (II) RADEON(0): B154EW08 V1
[ 173.357] (II) RADEON(0): EDID (in hex):
[ 173.357] (II) RADEON(0): 00ffffffffffff0006af748100000000
[ 173.357] (II) RADEON(0): 01100103802115780a1cf59758508e27
[ 173.357] (II) RADEON(0): 27505400000001010101010101010101
[ 173.357] (II) RADEON(0): 010101010101c71b00a0502017303020
[ 173.357] (II) RADEON(0): 36004bcf100000180000000f00000000
[ 173.357] (II) RADEON(0): 00000000000000000020000000fe0041
[ 173.357] (II) RADEON(0): 554f0a202020202020202020000000fe
[ 173.357] (II) RADEON(0): 004231353445573038205631200a0043
[ 173.357] (II) RADEON(0): Printing probed modes for output LVDS
[ 173.357] (II) RADEON(0): Modeline "1280x800"x60.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
[ 173.357] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 173.357] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 173.357] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 173.357] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 173.357] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 173.357] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 173.357] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 173.357] (II) RADEON(0): Output VGA-0 disconnected
[ 173.357] (II) RADEON(0): Output LVDS connected
[ 173.357] (II) RADEON(0): Using exact sizes for initial modes
[ 173.357] (II) RADEON(0): Output LVDS using initial mode 1280x800
[ 173.357] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 173.357] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fbd8000
[ 173.357] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 173.357] (==) RADEON(0): DPI set to (96, 96)
[ 173.357] (II) Loading sub module "fb"
[ 173.357] (II) LoadModule: "fb"
[ 173.358] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 173.358] (II) Module fb: vendor="X.Org Foundation"
[ 173.358] compiled for 1.11.1, module version = 1.0.0
[ 173.358] ABI class: X.Org ANSI C Emulation, version 0.4
[ 173.358] (II) Loading sub module "ramdac"
[ 173.358] (II) LoadModule: "ramdac"
[ 173.358] (II) Module "ramdac" already built-in
[ 173.358] (II) UnloadModule: "vesa"
[ 173.358] (II) Unloading vesa
[ 173.358] (II) UnloadModule: "fbdev"
[ 173.358] (II) Unloading fbdev
[ 173.358] (II) UnloadModule: "fbdevhw"
[ 173.358] (II) Unloading fbdevhw
[ 173.358] (--) Depth 24 pixmap format is 32 bpp
[ 173.358] (II) RADEON(0): [DRI2] Setup complete
[ 173.358] (II) RADEON(0): [DRI2] DRI driver: r300
[ 173.359] (II) RADEON(0): Front buffer size: 4000K
[ 173.359] (II) RADEON(0): VRAM usage limit set to 228499K
[ 173.359] (==) RADEON(0): Backing store disabled
[ 173.359] (II) RADEON(0): Direct rendering enabled
[ 173.359] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
[ 173.359] (II) RADEON(0): Setting EXA maxPitchBytes
[ 173.359] (II) EXA(0): Driver allocated offscreen pixmaps
[ 173.359] (II) EXA(0): Driver registered support for the following operations:
[ 173.359] (II) Solid
[ 173.359] (II) Copy
[ 173.359] (II) Composite (RENDER acceleration)
[ 173.359] (II) UploadToScreen
[ 173.359] (II) DownloadFromScreen
[ 173.359] (II) RADEON(0): Acceleration enabled
[ 173.359] (==) RADEON(0): DPMS enabled
[ 173.359] (==) RADEON(0): Silken mouse enabled
[ 173.359] (II) RADEON(0): Set up textured video
[ 173.359] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 173.359] (--) RandR disabled
[ 173.359] (II) Initializing built-in extension Generic Event Extension
[ 173.359] (II) Initializing built-in extension SHAPE
[ 173.360] (II) Initializing built-in extension MIT-SHM
[ 173.360] (II) Initializing built-in extension XInputExtension
[ 173.360] (II) Initializing built-in extension XTEST
[ 173.360] (II) Initializing built-in extension BIG-REQUESTS
[ 173.360] (II) Initializing built-in extension SYNC
[ 173.360] (II) Initializing built-in extension XKEYBOARD
[ 173.360] (II) Initializing built-in extension XC-MISC
[ 173.360] (II) Initializing built-in extension SECURITY
[ 173.360] (II) Initializing built-in extension XINERAMA
[ 173.360] (II) Initializing built-in extension XFIXES
[ 173.360] (II) Initializing built-in extension RENDER
[ 173.360] (II) Initializing built-in extension RANDR
[ 173.360] (II) Initializing built-in extension COMPOSITE
[ 173.360] (II) Initializing built-in extension DAMAGE
[ 173.378] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 173.378] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 173.378] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 173.378] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 173.378] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 173.379] (II) AIGLX: Loaded and initialized r300
[ 173.379] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 173.380] (II) RADEON(0): Setting screen physical size to 338 x 211
[ 173.458] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 173.458] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 173.458] (II) LoadModule: "evdev"
[ 173.458] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.459] (II) Module evdev: vendor="X.Org Foundation"
[ 173.459] compiled for 1.10.99.902, module version = 2.6.0
[ 173.459] Module class: X.Org XInput Driver
[ 173.459] ABI class: X.Org XInput driver, version 13.0
[ 173.459] (II) Using input driver 'evdev' for 'Power Button'
[ 173.459] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.459] (**) Power Button: always reports core events
[ 173.459] (**) Power Button: Device: "/dev/input/event4"
[ 173.459] (--) Power Button: Found keys
[ 173.459] (II) Power Button: Configuring as keyboard
[ 173.459] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 173.459] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 173.459] (**) Option "xkb_rules" "evdev"
[ 173.459] (**) Option "xkb_model" "evdev"
[ 173.459] (**) Option "xkb_layout" "us"
[ 173.497] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 173.497] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 173.497] (II) Using input driver 'evdev' for 'Video Bus'
[ 173.497] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.497] (**) Video Bus: always reports core events
[ 173.497] (**) Video Bus: Device: "/dev/input/event5"
[ 173.497] (--) Video Bus: Found keys
[ 173.497] (II) Video Bus: Configuring as keyboard
[ 173.497] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input5/event5"
[ 173.497] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 173.497] (**) Option "xkb_rules" "evdev"
[ 173.497] (**) Option "xkb_model" "evdev"
[ 173.497] (**) Option "xkb_layout" "us"
[ 173.498] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 173.498] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 173.498] (II) Using input driver 'evdev' for 'Power Button'
[ 173.498] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.498] (**) Power Button: always reports core events
[ 173.498] (**) Power Button: Device: "/dev/input/event1"
[ 173.498] (--) Power Button: Found keys
[ 173.498] (II) Power Button: Configuring as keyboard
[ 173.498] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 173.498] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 173.498] (**) Option "xkb_rules" "evdev"
[ 173.498] (**) Option "xkb_model" "evdev"
[ 173.498] (**) Option "xkb_layout" "us"
[ 173.499] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 173.499] (II) No input driver/identifier specified (ignoring)
[ 173.499] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 173.499] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 173.499] (II) Using input driver 'evdev' for 'Sleep Button'
[ 173.499] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.499] (**) Sleep Button: always reports core events
[ 173.500] (**) Sleep Button: Device: "/dev/input/event2"
[ 173.500] (--) Sleep Button: Found keys
[ 173.500] (II) Sleep Button: Configuring as keyboard
[ 173.500] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 173.500] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 173.500] (**) Option "xkb_rules" "evdev"
[ 173.500] (**) Option "xkb_model" "evdev"
[ 173.500] (**) Option "xkb_layout" "us"
[ 173.501] (II) config/udev: Adding input device CNF7050 (/dev/input/event10)
[ 173.501] (**) CNF7050: Applying InputClass "evdev keyboard catchall"
[ 173.501] (II) Using input driver 'evdev' for 'CNF7050'
[ 173.501] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.501] (**) CNF7050: always reports core events
[ 173.501] (**) CNF7050: Device: "/dev/input/event10"
[ 173.501] (--) CNF7050: Found keys
[ 173.501] (II) CNF7050: Configuring as keyboard
[ 173.501] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.5/usb1/1-7/1-7:1.0/input/input10/event10"
[ 173.501] (II) XINPUT: Adding extended input device "CNF7050" (type: KEYBOARD, id 10)
[ 173.501] (**) Option "xkb_rules" "evdev"
[ 173.501] (**) Option "xkb_model" "evdev"
[ 173.501] (**) Option "xkb_layout" "us"
[ 173.502] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 173.502] (II) No input driver/identifier specified (ignoring)
[ 173.502] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event6)
[ 173.502] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[ 173.502] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons'
[ 173.502] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.502] (**) Asus Laptop extra buttons: always reports core events
[ 173.502] (**) Asus Laptop extra buttons: Device: "/dev/input/event6"
[ 173.502] (--) Asus Laptop extra buttons: Found keys
[ 173.502] (II) Asus Laptop extra buttons: Configuring as keyboard
[ 173.502] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input6/event6"
[ 173.502] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 11)
[ 173.502] (**) Option "xkb_rules" "evdev"
[ 173.502] (**) Option "xkb_model" "evdev"
[ 173.502] (**) Option "xkb_layout" "us"
[ 173.503] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 173.503] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 173.503] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 173.503] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.503] (**) AT Translated Set 2 keyboard: always reports core events
[ 173.503] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 173.503] (--) AT Translated Set 2 keyboard: Found keys
[ 173.503] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 173.503] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 173.503] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 173.503] (**) Option "xkb_rules" "evdev"
[ 173.503] (**) Option "xkb_model" "evdev"
[ 173.504] (**) Option "xkb_layout" "us"
[ 173.504] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 173.504] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 173.504] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 173.504] (II) LoadModule: "synaptics"
[ 173.505] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 173.505] (II) Module synaptics: vendor="X.Org Foundation"
[ 173.505] compiled for 1.11.0, module version = 1.5.0
[ 173.505] Module class: X.Org XInput Driver
[ 173.505] ABI class: X.Org XInput driver, version 13.0
[ 173.505] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 173.505] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 173.505] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 173.505] (**) Option "Device" "/dev/input/event9"
[ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 173.716] (**) Option "TapButton1" "1"
[ 173.716] (**) Option "TapButton2" "2"
[ 173.716] (**) Option "TapButton3" "3"
[ 173.823] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 173.823] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 173.930] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input9/event9"
[ 173.930] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 173.930] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 173.930] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 173.930] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[ 173.930] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 173.930] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 173.930] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 173.930] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 173.930] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 173.930] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 173.930] (II) No input driver/identifier specified (ignoring)
[ 173.931] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 173.931] (II) No input driver/identifier specified (ignoring)
[ 180.276] (II) RADEON(0): EDID vendor "AUO", prod id 33140
[ 180.276] (II) RADEON(0): Printing DDC gathered Modelines:
[ 180.276] (II) RADEON(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
[ 183.590] (II) RADEON(0): EDID vendor "AUO", prod id 33140
[ 183.590] (II) RADEON(0): Printing DDC gathered Modelines:
[ 183.590] (II) RADEON(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
I deteled the part where it lists all the suported video cards...
Thanks in advance.
Last edited by Hyugga (2011-10-20 06:46:11)

Same problem here
Worked like a charm before.
/etc/X11/xorg.conf
# NOXORGCONFEXISTED: No X.org configuration file existed when this backup was created.
/etc/X11/xorg.conf.d/10-evdev.conf
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
/etc/X11/xorg.conf.d/10-synaptics.conf
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
EndSection
Xorg log
[ 90.424] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 90.424] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 90.424] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 90.424] (II) LoadModule: "synaptics"
[ 90.424] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 90.424] (II) Module synaptics: vendor="X.Org Foundation"
[ 90.424] compiled for 1.11.0, module version = 1.5.0
[ 90.424] Module class: X.Org XInput Driver
[ 90.424] ABI class: X.Org XInput driver, version 13.0
[ 90.424] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 90.424] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 90.424] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 90.424] (**) Option "Device" "/dev/input/event6"
[ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5598
[ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4670
[ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 90.500] (**) Option "TapButton1" "1"
[ 90.500] (**) Option "TapButton2" "2"
[ 90.500] (**) Option "TapButton3" "3"
[ 90.532] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 90.532] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 90.564] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[ 90.564] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 90.564] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 90.564] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 90.564] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[ 90.564] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 90.564] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 90.564] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 90.564] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 90.564] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 90.564] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 90.564] (II) No input driver/identifier specified (ignoring)
Last edited by akurei (2011-10-14 10:28:45)

Two finger scroll no longer working in windows 7 HP Pavillian 15t- n200

Hello! My two finger scroll on the touchpad is no longer working! I have run the BIOS again and disconnected battery with power off for 60 sec but still not working. Please help! Thank you so much

Hi eg1978
Welcome to the HP Forums! I see that you are having issues with your two finger scrolling. I have a couple of things for you to try. This HP document Using and Configuring the TouchPad has a section on Turning individual gestures off and on and make sure that the two finger scrolling is enabled. If that does work then reinstall your Synaptics TouchPad Driver.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Two-finger scroll doesn't work in the "comments list" in Adobe Reader

Adobe Reader XI version 11.0.07, Mac 10.9.3
Two-finger scroll works great in the main pane. However it doesn't work in the comments list area (View -> Comments -> Annotations).
Dealing with 500+ annotations that I have to approve. Not being able to scroll through them easily is frustrating.
Any suggestions?
Thanks!
Tom

https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
On Sun, Jun 8, 2014 at 12:30 PM, YesThatTom <[email protected]>

Touchpaad dual finger scrolling is not working

i have hp 15-d107kx i had installed the drivers but it is not working smoothly and also the dual finger touch scrolling is not working properly...... what should i do now...........

Shanks_Jd wrote:
i have hp 15-d107kx i had installed the drivers but it is not working smoothly and also the dual finger touch scrolling is not working properly...... what should i do now...........
Hi Shanks_Jd
Please give your following details: Operating system & 32 or 64-bit?
Hope the model you are having is HP 15-d103 Notebook PC. Hope you have downloaded the latest Synaptics Touchpad driver from your HP product website.
Go to: Troubleshoot your touchpad and follow the steps given there.
Go through HP Notebook PCs - Using and Troubleshooting the TouchPad or ClickPad specifically.
Also, check whether 2-finger scrolling is enabled in Synaptics touchpad controls:
Go to Control Panel --> Hardware & Sound --> Synaptics Touchpad icon below
It'll open Propeties of Synaptics touchpad window.
Enable Multi-finger gestures, Two-finger scrolling & Scrolling by checking mark them. Click Apply, OK.
Restart the system.
Hope this resolves your issue
Thanks
Visruth
*CLICK "ACCEPT AS SOLUTION" TO HELP OTHERS WITH THE SAME PROBLEM*
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Two finger scrolling doesn't work after switching to lion

I recently upgraded my 2011 macbook pro to lion. All trackpad functions seem to work except two finger scrolling, which worked fine before the upgrade. I found the discussion forum that I've pasted below on how to fix this problem. Being something of a luddite, I don't know how to either check or change the settings in the users global preferences. Some instruction or other thoughts would be greatly appreciated, as I miss two-finger scrolling!
Thanks!
The correct value in the users global preferences file for com.apple.trackpad.scrollBehavior is 2 to enable scrolling.
To set it correctly open a terminal window and type the following:
defaults write -g com.apple.trackpad.scrollBehavior 2
You will have to log out and back to see the setting change. Worked for me.
you can check your current setting by typing:
defaults read -g com.apple.trackpad.scrollBehavior

It'd be much easier to go to System Preferences > Universal Access > Mouse & Trackpad tab > Trackpad options... button > check Scrolling.
Regards,
Captfred

Two-finger pinch zoom not working with safari

Suddenly, the two-finger pinch to zoom is not working with Safari. MBP 13", SL 10.6.8 andf Safari 5.1. The View Menu Zoom control works fine, and the Pinch gesture works once thereafter, but then not. I have reloaded the Safari .plist. Gesture works with the Desktop icons and iPhoto. Any suggestions?
TIA
Picman

Ditto with the Newsstand-blocks-the-Home-Screen bug.
I was eager to see the revised New York Times layout and disappointed when Newsstand wouldn't pinch closed.
The irony is, we can finally "hide" the Newsstand in a folder but now it takes over our Home Screens. I'm hoping this will be fixed in the first update.

Two finger swipe is not working in mavericks

In mountain lion (MAC OS X 10.8) I use " command+alt+Y " key combination to watch the photos from any folder and use my two finger to swipe photos foreword and backward.
But it seems missing this functionality in mavericks, if not please any one help me to get it back in mavericks (MAC OS X 10.9).

Read through this thread. There are a few things that might help you.
https://discussions.apple.com/message/23467302#23467302

My two finger scroll is not working

Similar Messages

Maybe you are looking for