My tx2-1274dx notebook pc has blinking lights and wil not start up. Battery or CPU?
Blinking lights? I had previous messages of a low internal battery. The light sequence says cpu. other inquries say internal battery can't start up the computer?
Good Morning JDLWI,
I see that the lights blink 9 times slowly and there is no code for that sequence.
Here is a link to Testing for Hardware Failures (Windows 7, Vista) that may aid with this difficulty.
If you still are unable to boot into Windows and have not determined the cause, I suggest contacting HP support for further assistance.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region Technical Support Sitemap .
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
Similar Messages
-
Mac Book Pro has blinking folder and will not start.
MY Mac Book Pro mid 2010 has the blinking folder and is froze, I have entered into the Internet recovery mode and tried to reinstall OSX system. And in the Disk Utility there is no hard drive to select. What is the next step?
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
My IBOOK has shut down, and will not start back up
ok here is what has happened. yesterday my 1.2ghz g4 ibook started randomly shutting down. it would shut down and it would take a while of me pushing the power button to get it to start back up. when it would come on, it would switch between charging and not charged quite rapidly even though my power cord was in. now however, it has shut down and will not start up. the battery is fully charged. anyone have any ideas?
I'm telling you. I have lost all faith with Apple. The old iBook I had, 800MHz G4, simply worked fine with no problem waking up or starting up, although it's just a bit slow. Now, I am super frustrated when it just couldn't wake up, either with the sleep light flashing or not, ie it's black screen initially and when I press the Power button once to get it back to life, it just stays black!!!
So the only thing to do is to force power down by pressing the Power button for 10 seconds. Then I press the Power button once to start up, but it just stays black screen. I've left my iBook in that state for a day now, hoping that it will come back alife. But no! And the worst is, I had a similar problem starting up from wake just the day before. I called the Help Desk and they advised me step by step, from taking out the battery, to pressing OptionsCommand+PR, and OptionsCommand+OC, and doing Apple Hardware Test. The iBook seems to just work fine while on the phone with them. And barely 3 hours later, the thing just couldn't wake up. I've powered down and up many times now, and I've left it powering up, but still black screen till now (one day already).
Finding out about resetting PMU on the support page, I've also tried that, but it still can't work.
And you know what? I've sent this unit for repair 3 times already! First they say it's the HDD problem, so they changed that. Then when it still happened, they say it's the logic board problem, so they changed that for me. And again when it happened, they changed another logic board for me. So now, it's the fourth time, what do you think I should do? I don't think going back changing another logic board will help!
I am in fact ****** off! If Macs are great, then why me? Why my iBook? I am telling this forum that we cannot accept a big corporation giving us sub-standard products. I've since read this forum carefully and found that many of us faced the same problem! We just cannot sit down idly and let the company get away with it. This is a warning to fellow users out there that face this same problem. Let us voice out our frustrations and make Apple give us some compensation for it. I say this because I depend on my laptop iBook for presentation to clients, and this happened exactly twice when I was in front of my clients. I don't mind losing face but can Apple compensate me for my loss of business and future business from my clients?
Voice out strongly your unhappiness to Apple now! -
I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one? Also, the software is not updated as the computer hasn't worked for about 2 months.
Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well? It is not saved in the cloud.
Thanks for your help, it is much appreciated.You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line -
My ipada mini has over heated and its not starting
my ipada mini has over heated and its not starting
What do you mean by 'frozen' ? Have you tried a soft-reset to see if that gets it to work ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
My airport express has a blinking yellow light and is not working. I have tried resetting it a few times, to no avail.
My airport utility on my desktop detects it and will attempt to connect. However, after a few moments it says "An unexpected error occurred Try again."
I'm running Mavericks on a 24-inch 2007 mac, 2.4 GHz Intel Core 2 Duo, 4 GB 667 MHz DDR2 SDRAM, OS X 10.9.3 (13D65). The Airport Express is model A1264. I connect to it via an Airport Extreme with 7.6.4.
Thanks in advance.I have the same problem with my airport express – a blinking yellow light and it is not working. I have tried resetting it a few times.
My airport utility detects it and try to connect. However, after a few moments it says "An unexpected error occurred Try again.
Airport Express is model A1143
And I have tried to connect with iPhone - same same. -
My Apple TV just has a white blinking light. Will not turn off. The TV shows nothing but the Apple logo. It worked fine yesterday. PS - I am not an IT person.
pull the plug for 30sec and try reconnecting power
if that don't help
Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support -
What is this code mean, ( 14 slow blinking lights and 5 fast blinking lights) mean
need to know what this means please, 14 slow blinking lights and 5 fast blinking lights) mean
thank you thank you for taking an interest. this is so frustrating.
i only have apple keyboard, mighty mouse, and 20 inch cinema display connected. this morning took out memory and tried to boot up with individual pairs in the first bank. first the (2)256, the (2) 1g, and then the other (2) 1g modules. everytime I get the weird fuzzy wheel under the logo after a while, black screen flashes, then grey apple logo fuzzy screen then black forever.
I ran tiger updates this morn. still will only boot to safe mode. then tried to run leopard disk to install it
will not boot from leopard disk.
tried safe boot, then doulble click install leopard, restart, then the saga repeats with the pixely red square around the wheel.
these are fresh drives with only what came on instll disk loaded.
thanks again for taking an interest.
i love this system(well at least i did). I want to install leopard on my powerbook too but am terrified to do so right now since it is working and I have work to do. Can't afford to have no computer to do my work on...self employment is great?!
This is making me crazy. I anxiously await your words of wisdom. -
My Airport, even after a Factory default reset, just has a rapidly flashing white light and will not boot up. What should I do?
Thanks for you response! I have had it for about 5-6 years ... don't know if that is "vintage" or not. I just got back from our local Geneis Bar and they declared it "DOA." So, I've got a new one and getting ready to install. Thanks, again!
-
What does Warning SUID file System/Library/Core has been modified and will not be repaired mean?
what does Warning SUID file System/Library/Core has been modified and will not be repaired mean how does that happen?
its a Macbook Air 2009 i clicked on notebooks yet it put iPod
-
What does this message mean? "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired" I get this when I try to repair permissions in disk utility.
It's an innocuous error you can ignore. It was introduced with previous updates for ARD and/or Java before Lion. These are messages, not errors. They will cause no harm, and they will be repeated each time you repair permissions.
-
I have been transfering photos and movies to an external hard drive and when I try and secure trash contents off my computor i get the message it will not continue In utilities the message is: SUID file syst/library/coreS has been modified and will not be repaired. Hence I cannot free up space on my computor. What can i do?
Do not worry. It is probably a permission you should ignore, but you should check that the permission appears in this site > http://support.apple.com/kb/TS1448?viewlocale=en_US&locale=en_US
-
I have a mid 2007 iMac running OS Mavericks and the hard drive is failing. When doing a disk permissions verify it shows SUID file system/library/coreservices/remotemanagement/ARDAgent/contents/MacOS/ARDAgent has been modified and will not be repaired. I do not have a backup of my system due to my external drive I use for backing up my system has stopped working. Can I repair this myself without having to reinstall the OS so I don't loose my any of my files.
You can safely ignore that.
Disk Utility's Repair Disk Permissions messages you can safely ignore -
Tried to upgrade to osx 10.9 from 10.7 and I didn't notice that it downloads in the launcher. I turned my mac off and ever since then it has glitched out and will not download no matter what I do. I have had it for 3 years which is out of warranty. It now has a blank bar under the launch pad and no matter how many times I try re-downloading it or restarting my computer it does not work. I use too play starcraft and other games on this computer although new patched/updates have made it that I can no longer do that now. Really frustrating having to deal with this especially after buying this computer upfront and now out of warranty.
Go to your Applications folder and find a file called "Install OS X Mavericks". Send it to the trash and delete it. Then try the download again.
-
In Photoshop Elements 11, the editor workspace has stopped working and will not open.
In Photoshop Elements 11, the editor workspace has stopped working and will not open.
Operating system? and how are you opening it? From a shortcut, from the welcome screen, from the organizer, from the program/application file itself?
Maybe you are looking for
-
Performance Issue for BI system
Hello, We are facing performance issues for BI System. Its a preproductive system and its performance is degrading badly everyday. I was checking system came to know program buffer hit ratio is increaasing everyday due to high Swaps. So asked to chan
-
Computer sees monitor-but monitor does not see computer.
I have a MacBookPro with the older 29 pin DVI out. I own an 8.4" HD monitor for video production and want to use it for editing. I am trying to get my Marshall V-R84DP-HD monitor to see the computer and it does not recognize it. I have Mac OS X Versi
-
Hi,,, I have to convert one of my reports made on 6i version which contains bar chart that is working on this version after upgrade to 10g I couldn't work with it because its depraceted what to do pls help Best Regards Maher
-
Bridge shows always the same JPGs files crippled
Hi together, since yesterday Bridge shows *some* JPGs in a destroyed preview (or no preview). Screenshot of the Bridge preview panel: The curiosity: I have deleted all the Bridge Cache (manually in "users/library/caches/...."), also the exported cach
-
Roaming Wifi network and home sharing
Hi all, I have the following situation: my iPad (3rd gen) uses my Wifi network to stream my home shared iTunes library. I have a wireless router at one side of my house and an Airport Express at the other side (wired to the router). Both wireless net