My TX2 doesnt boot !

hi guys
i have a problem with my tablep pc TouchSmart Tx2-1125 ee
several times my device going to hibernate cuze of battery charge was end and when i turn on , it doesnt boot any thing and just too light on the keyboard was flashed , and i restart my device and then it was booting correctly , but at the last time when i do this , it doesnt work and my laptop couldnt turn on , just power LED is on and two light on the keyboard are flashing
i show u this on my utube channel : http://www.youtube.com/watch?v=YT0vgMtQuZo
i hope some one have an answer for this situation

@ MJ2011
>   too light on the keyboard was flashed
How many times would you say?   ; )
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01732674&tmp_track_link=ot_recdoc/c01443371/en_...
(BING search with
     site:hp.com black screen LED lights count TX2

Similar Messages

Nokia booklet doesnt boot and no bios

hi
Ive bought a new booklet and installed all the updates. While surfing on the internet i suddenly wasnt able to use the keyboard or the touchpad. I wanted to restart but the power button didnt react too. So i took the battery out of the booklet.
But now it doesnt boot and theres a black screen. I cann hear the fan but after a few minutes the booklet turns off aggain. What can i do???

There is no fan, but what you hear might be the hard disk. BTW, does the Booklet/BIOS really not offer an option to boot from SD cards (which has been a common feature for ages on many notebooks featuring such readers), or do they just need to be formatted in some particular/peculiar way? I did see an "Operating System not found" error message when waking up from hibernation while an SD card was plugged in, so under some circumstances it DOES seem to try (and give preference over the hard disk).

MacBook doesnt boot when wi-fi router is on.

Greetings.
Thats pretty weird but it is how it is. First time my mac refused to boot i was really confused: tried everything and it didnt help: i saw a loader on the screen but it didnt boot further. Then i decided to re-install Mac Os. Did it, but next time i turned my Mac off i wasnt able to boot it again.
A miracle solved the problem: occasionally i unplugged power supply from my wi-fi router (D-Link DI-524 that is. Latest firmware update installed. original Release:B), and voila my MacBook did a happy beep-beep and started to load a system. So as it is now my MacBook Doesnt boot when my router is on and it does boot if i turn router off.
My MacOsX 10.4.1 is freshly installed with all latest updates that i downloaded via "update software" thing. Did no tuning to it, almost no 3rd party software installed so far, apart from MS Office 2004. My question is pretty simple: How can i make my MacBook boot without unplugging power from my router (since its pretty weird to do it every time i turn my Mac on).
Any suggestions?
Thank you for your help.

Could it just be stuck trying to join a Network, or mounting a Share of some kind?
Might try dragging these to the Desktop, reboot, and see if it works...
/Users/YourUserName/Library/Preferences/com.apple.internetconnect.plist
/Library/Preferences/SystemConfiguration/preferences.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
/Library/Preferences/com.apple.sharing.firewall.plist
Also any...
~/Library/Preferences/ByHost/com.apple.networkConnect.<12 digit number>.plist

IBook doesnt boot anymore

Servus alltogether,
I really have a BIG problem with my iBook here. I've installed the Screen Spanning Doctor in order to activate a second screen, and my iBook doesnt boot anymore. It gets to the point with the grey apple and the wheel, and then (using apple+v) there seems to be a problem by loading a file called dyld
dyld:library not loaded: usr/lib/libz.1.dylb
etc/rx line 262 55 trace / BPT trap couldnt find root user usr/sbin /update
I tried to reset nvram in open firmware without any sucess. I can log on in single user mode, but i dont know what i can do now from there.
It would be also very helpfun if soneone could tell me how to mount a external hard drive (I have a Lacie hard drive, perhaps I can rescue my data. Its still there, I checked it in single user mode.) or a usb-stick.
Perhaps it is also helpful when I tell you this: It is a G4 ibook, using the newest patch of mac os x tiger, and my graphic chip is a ati readon 9200 (which should work with the screen spanning doctor but apparently didnt).
I am really in trouble here, because I need this iBook for university. So please help me if you can.

Try starting up from a CD (Apple-C) or in safe mode: http://docs.info.apple.com/article.html?artnum=107393
Either of these methods should get your booted. Then, back up your data! Next, try Disk Utility to fix your disk. You may have to reinstall the OS. Luckily, you have that backup now.

My netbook doesnt boot or charge!

All of a sudden, i press the power button and tow lights appear for about 5 seconds and nothing happens! And i dont see the red ligh when i power to power cord in the notbook, please tell me how to fix this? The notebook doesnt boot at all

please, take a look at the tread first. if the suggestions don't work, i believe you'll need battery replacement as you said.
http://forum.lenovo.com/t5/IdeaPad-Y-U-V-and-Z-series/Lenovo-Ideapad-Y560D-AC-Adapter-Battery-Proble...

Lenovo G400 doesnt boot

Hi Guys
my lenovo doesnt boot
the installation was messed up
windows was setup in drive d
doesnt really matter
is there something i can download to format the laptop
it keeps on restarting
doesnt even reach the login page
thanks

If the battery-LED is blinking fast (approx. 2 times per second) remove the battery, disconnect from power supply and press the power-button for 30 seconds. Then attach the power-supply leave the battery off and try to poweron the notebook. Dead batteries also can lead to the symptoms you described.
More hints:
The Z60 is based on the ThinkPad T43. It also can get "Flexing".
Other causes may be contact with liquids in the past, damaged keyboard, crashed BIOS-update, a short in the USB-ports.
To reset the CMOS you also can remove the BIOS-battery but take care: If BIOS-passwords had been set, you only can run the computer after entering the supervisor-password.
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

Qosmio x70-a doesnt boot

Hello. I'll try carefully to describe my problem. My notebook wont boot at all. After playing 15-30 min my notebook just shut down and wouldn't start. This notebook is only month old after coming from factory. I've tried to plug in and out the battery, thinking that some os problem occuried but the notebook just doesnt boot. Thx for answering.

Your best bet is to call Tech Support at 1-800-457-7777 and get on record immediately as having problems as well as getting some real time help.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Fsb increase = xp doesnt boot

i was just wondering (as i have no reason to oc its just a query) why windows xp doesnt boot when i up the fsb to say 140...
i have a kt4, amd2000+ & 1gb of pc2100 twinmos memory

well that would be good if i was willing to search for such a cpu (those are actually rare, i can't find it in stores catalogs), and it would cost me around 70 euros if i did. i don't hink i could sell my palomino xp2000+ for that money, so wouldn't it be best for me to perform the unlocking of the palomino?
i have read that some people experienced no improvement in performance. i also don't know what can go wrong if the unlocking goes bad. will it fry my cpu? will it need periodic re-unlocking (conductive paint could be damaged)?
i would only try to do this if i knew i would have a clear advantage, and a clear conscience of what i am doing and what can go wrong....
the temptation is big, but the fear overrides it.

Powerbook doesnt boot ?

Hi, I've tried to power my powerbook g4 this morning and it doesnt boot up?
When pressing the power button you can hear it attempt to power up but then it just make a funny beep.
What can i do? the screen doesnt come on as well

Your best best is to stick with Crucial, Kingston, or Samsung. Crucial is sold by direct and thru retailers. The Crucial UK site is at http://www.crucial.com/uk/ . Kingston's site is at http://www.kingston.com/ukroot/ (note, avoid their valueram line of memory as it usually doesn't work in our Powerbooks). Samsung is sold thru retailers. Online in the US you can get it from http://www.macsales.com - sorry, can't give you a UK retailer. You can pick up the stock number of the memory needed from the vendors sites then look locally too

MSI FM2-A75IA-E53 doesnt boot.

Hi,
My setup is: all new
MB: MSI FM2-A75IA-E53
CPU: AMD APU A6 6400K
ram: Kingston hyperX ddr3 1600Mhz KHX1600C9D3B1K2/8GX
It doesnt boot, there is only 2 short beeps and it loops like that. Please share some ideas on what is the problem?
Thank you.

Quote from: eligiusz on 04-December-13, 01:28:14
Hi , thank you for this post...
the serial number of the board is: 601-7792-010B1303109964
but how is it possible ? on the box it says it supports AMD A10 A8 A6 A4 processors.
yes it needs updating like Flobelix said as its a unsupported CPU by the BIOS the board has!
but how is it possible ? on the box it says it supports AMD A10 A8 A6 A4 processors. - answer is yes it does support the A4-A10 processors but only the Trinity ones (Eg: A6-5400k Trinity APU out the box) not your new Richland one as its not supported without updating the board BIOS to recognize the APU itself!

Laptop doesnt boot after installing a new hard drive

HP G60-630us laptop ...replaced hard drive ...installed 3 startup discs.. after you remove the last disc, when you hit continue it is supposed to boot up ...it reads no bootable device ......if you put the first disc in to boot up, you end up back where you started.....i changed the boot order & put hard drive first ...still doesnt boot up
This question was solved.
View Solution.

Hi,
The image you download should just appear as 1 file. You should then use the 'Burn a disc image' option in Power2Go to write this correctly to a disc.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

LED blinks upon switching on, system doesnt boot up!!!

I have HP Pavilion dv4 1225dx laptop
While switching on LEDs located near caps lock and num lock are blinking, without any beep sound. At the same time, the exhause fan runs. But the system doesnt boot up. The LED blinks continously, with out stopping. Time to time the system boots up and i was able to work normally, still with blinking LED signals.
To note, i dont see anything in the screen and i tried with alternative screen, but the situation remains...
I checked in the Hp support, which conveys the problem in the CPU. but I was able to login my system even after this problem.
So im not sure my CPU is having a problem.
Before this issue, there used to be a message while switchign on about replacing the internal battery. This i havent done yet. Im suspecting this issue.
Also, recently i cleaned the exhaust windows using an air gun.
Presently, My system is working on windows 8 OS.
I hope to have answers to my problem
Thanks in advance

Thanks for the reply!
But how to overheat the system.
I tried leaving it on for at least 7-8 hrs, then sometimes it starts and not sure about all the time.
Moreover how to switch off the fan to overheat the system.
Anyway both suggestions will take time to switch on, is there any instant solution???
thanks in advance

G5 doesnt boot- common tricks seem not to work

hi,
today I found a suspicious folder on my HD with a 3letter name I had never seen before, after seraching through it and finding several folders (share, lib, bin etc) I found an item called instanthijackserver. i moved the whole folder into the trashcan, moved a sinlge file called .raw on my desktop and then decided, to move the whole folder back on to the desktop. then my browsers startet to act up (google told me about a spelling check error when I tried to enter search words and firefox wouldn't even start), so I shut the computer down. since,
my ppc doesnt get past the grey apple when booting, then the vents go off crazy.
I have tried:
-start up from Install Disk with holding C while turning on
-holding ALT while starting, selected HD and Install Disk (after doing that i get prohibitory sign)
-safe mode
-single mode: can't type anything (fsck)
-open firmware mode: can type, did the nvram and pram reset, nothing changed
-unplugged it, took out the battery and started without, then again with
-did the cuda reset
nothing gets me past the grey screen
i get the following after entering verbose mode:
Using 2621 buffer headers and 2621 cluster IO buffer headers
AppleKauaiATA shasta-ata features enabled
DART enabled
FireWire (OHCI) Apple ID 52 built-in now active, GUID 001451ff fe358888; max speed s800
CSRHIDTransitionDriver: : probe: -v
CSRHIDTransitionDriver: :start before command
Security Auditing service present
BSM Auditing present
Disabled
Rooting via boot-uuid from /chosen: F485CDBC-7F36-3851-9084-CB17430DAC87
Waiting on <dict ID=“0“><key>IOProviderClass</key><string ID=“1“>IOResources</string><key>IOResourceMatch</key><string ID=“2“>boot-uuid-media</string></dict>
Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@9/IOPCI2PCIBridge/k2-sat a-root@C/AppleK@SATARoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageD river/IOAtABlockStorageDeviceIOBlockStorageDri ver/Maxtor 6L250M0 Media/IOApplePartitionScheme/Untitled 3@3
BSD root: disk0s3, major 14, minor 2
AppleSMU: -- shutdown cause = 3
Load of /sbin/launchd, errno 2, trying /sbin/mach_init
Load of /sbin/launchd failed errno 2
AppleSMU: :PMU vers = 0x000d00a0, SPU vers =0x69, SDB vers = 0x01,
CSRHIDTransitionDriver: :stop
IOBluetoothHCIController: :start Idle Timer Stopped
then the fans start acting up again...
i removed my original RAMS and put em back in, unplugged all peripherals - nothing.
anyone witha a good idea??

You could do that, but suggest you insure no Disk Corruuption first, this can be Done in T mode also without booting from the Install Disc...
Try Disk Utility
1. Insert the Tiger Mac OS X Install disc , then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, *you must select your language first.)*
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk
If all the above fails, then it appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.

X220 doesnt boot after spill

Hello,
i spilled water on my keyboard. at first my x220 continued working without any issues but i took the opportunity to take off all the keys and whipe it clean. my computer was in standby at this time. after reinstalling all the keys i intended to start my system and it refuses to boot.
while reinstalling the keys i noticed that the display "flashed up" once what apperead to me as if the computer was switching from standby to hibernating mode. it did this as i was applying pressure to put the left shift key, being just above the vga slot.
when i know press the power button it starts blinking a few times but the screen stays black, no further reaction. if i take out and replace the battery and press the power button, the screen flashes up shortley as it did while replacing the keys of the keyboard and it does so showing a few colored vertical stripes.
what can be the problem here? will it be due to possibly entered water (are they not supposed to be spill resistant) or might i have squeezed the graphics adapter or other sort of hardware when reinstalling the keys? is there anything i can do now? hooking the x220 up to an external monitor doesnt help either. the external screen stays black and the system still does not boot;
thanks for any help. unfortunately i will not be close to any lenovo dealership for support for the next few weeks as there arent any in northern chile.

Hi,
The image you download should just appear as 1 file. You should then use the 'Burn a disc image' option in Power2Go to write this correctly to a disc.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Windows doesnt boot anymore , amd format gives problems aswell. [K8N Neo2]

hi guys,
i made a thread about this issue in the dutch MSI forums aswell, but the more help the better no?
i'll first start with my system specifications , so we have that out of the way:
Motherboard: MSI K8N Neo2 Platinum (s939) bios v1.5 (tried 1.B but that didnt solve my problem)
Processor: AMD Athlon 64bit 3500+ (2.2Ghz) (dont know the core , i think it was newcastle)
Geheugen: 2X Crusial BallistiX CL2 PC 3200 512MB (i also have 2x Corsair XMS PC3200 CL2 memory, but i only equipped my computer with the Crusial BallistiX memory atm)
Videocard: Sapphire Radeon X850 XT PE
Power Supply: Enermax 20 / 24pins 32A on the 12V line
well, my problem started about 2 days ago, when i shut down my computer, since the F.E.A.R demo ran a bit laggy ( i had all 4 of my memory modules in my PC then, and i wanted to remove the corsair memory ) once removed i only had the Crusial BallistiX memory in it , in dual channel , slot 1 and 2 (slots closest to CPU) , but once i booted my computer, i got a BSOD just after windows loaded.. something about the ACPI. the STOP number was:
STOP: 0x000000A5(0x00000011,0x00000007,0xF771F180,0x0100000E)
then i putted my corsair memory back in, but then i still got this BSOD.. and it said something about the BIOS, so i updated my bios to 1.B , but that didn't help a bit, so i donwgraded my bios again to v1.5 , hich i have now. i only have the crusial ballitix installed atm, which runs stable according to memtest (ran it for 14 hours, then i stopped it) with this timing: 2.5-2-2-5 1T (Cas latency 2 just wont run stable)
so my memory is OK i suppose.. and wlel, i couldnt get into windows, so as a final solution, i decided to format the harddrive, so i entered my WindowsXP CD , and it began loading the drivers (and i pushed F6 , and loaded the S-ATA / Raid Drivers ) , but straight after it loaded the things of the CD i get:
- a BSOD , with something about the ACPI
- reboot
- flashing underscore in the upper left courner..
so i cant really do anything , except get into the BIOS. i also tried to start windows in safe mode, but then i get a message similar to this:
'Cannot start windows , because the following file is damaged or missing:'
<windows-mainfolder>\system32\ntoskrnl.exe
so i first thought about a virus, but that seems kinda odd , since i run a virus scan everyday (my virusscanner is NOD32) , and i think a virus with such destructive power will be detected..
another number from a BSOD (i get this one most of the times now) is this:
*** STOP: 0x0000007E (0xC0000005,0x804F35C1,0xF7C45F10,0xF7C45C10)
hopefully you guys have an idea what to do, and as a final solution, i am willing to afford a new harddrive, but will that solve my problem? or is something else causing this problem?
Yordy_
(sorry for my bad english, i'm dutch )
*edit*
something i forgot to mention, is that sometimes when i enter the BIOS , it just freezes ( i cannot do anything.. )

Quote
Try another CmosClear like mentioned before for the DMI-Pool and PNP Area to reinitialise.
didnt really get that, but i removed the CMOS battery , and placed it back in again , but that didnt help, and by the way, my problem got worse :(
i didnt do anything really.. just trying to start my computer .. but i can currently do this:
1. Press power on button
2. watch screen
3. press power button to shutdown
and that is as good as it gets :(
it sais to press del to get into the BIOS,but no matter what i press, it doesnt matter.. it then goes to the post screen, and displays this message:
CMOS Checksum failed! Loading defaults
something like that.. and here the system is totally frozen so i have to power off / reboot
and before hat message i cannot push a button!
I dont think my motherboard can be rescued can it?

My TX2 doesnt boot !

Similar Messages

Maybe you are looking for