My TX2 suffers from the bad cpu socket syndrome Lawsuit?.

My TXT does the bad cpu light flash at start up. If I do the "bake" the motherboard thing to reflow the cpu socket, or remove the keyboard and use a heat gun to heat the socket solder, it will work fine. It will last about a week, longer if I don't allow it to shut off. The thermal cycling of the cpu socket is a problem and most if not all the TX2s suffer from this. It was blamed on an overheating gpu byt that is not the problem in most cases. What can be done to get HP to rectify the design/build problem.
Stew

Clear CMOS Guide (remove power cord before proceed) and insert memory stick in DIMM slot close to CPU socket.(ensure its filled well too)
if no go try with different memory stick.

Similar Messages

How can we take the cursor to a different sub-screen from the BADI?

Hi,
We have to do some validation on Header, Operation and Relationship of any work order (IW31, IW32). We have checked that validations can be done at BADI WORKORDER_UPDATE in the method u2018AT_SAVEu2019. But user wants us to take the Cursor back to the field and screen due to which the error is coming. How can we take the cursor to a different sub-screen from the BADI?
Thanks in Advance,
Pranav

You 'ran out of room' because you tried to put your entire question into what is the 'Topic line' of the post.
This is a fairly common error, as a scan of the topic list will show, and likely due to a design flaw in the layout of the composition page.
Most posters who make this error do so on their first post, and are able to avoid a similar misstep on their second and subsequent questions.
Regards,
Barry

I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

I tightened all HD screws and it didn't help. With the machine running and side of the case off, I physically stopped both the video card fan and the front case fan with my finger for a couple seconds and the noise continued. I also took all hard drives out one by one and rebooted each time. Again, the noise continued until I took out the Mac HD in Bay 1, rebooted, and I had a very quiet, silent machine. The issue is the hard drive in bay 1 that shipped with the computer, it's without a doubt causing the hum/woosh sound. I still need to know if I can safely swap the Mac HD from bay 1 to bay 4 without any issues to the operating system. I would like to try that to see if it dampens the noise but I also want to make sure this swap won't screw up my machine at all.

Is Your Footage Suffering from the Massive Difference in Export Quality Between FCPX

I read this article today and considering I do all my rendering through Premiere or AME it made me a little concerned. What does Adobe think of this? and has any else experienced this problem?
Cheers,
Moja.
I took this article from: Is Your Footage Suffering from the Massive Difference in Export Quality Between FCPX & Premiere?
A rational person might assume that the program from which you export your media wouldn't have a noticeable impact on the quality of the final image, especially if the export settings are identical in both programs. A recent test by filmmaker Noam Kroll might just teach us to think twice before making assumptions.
First, a little bit of background on Kroll's test. Having noticed that exporting from Adobe Media Encoder yielded quicker results than using the same settings and exporting from FCPX, he tended to use Media Encoder for the bulk of his exporting. When a recently exported project came out with some nasty compression artifacts, blocky rendering of certain areas, and a noticeable change in color quality, Kroll put on his detective's hat and tried exporting again from FCPX. To his, and soon to be your, surprise, the exported result from FCPX yielded significantly higher image quality with the EXACT same export and compression settings.
Don't believe it? Have a look for yourself. According to Kroll, "both FCP X and Premiere Pro were set to output a high quality H.264 file at 10,000 kbps." The image on top was exported from FCPX and the bottom was exported from Premiere Pro.
Exported from FCPX
Exported from Premiere Pro
In the shots above, you'll notice more blocky compression artifacts in the version exported from Premiere, especially on the lower part of the woman's face, and there's a fairly significant reddish hue that's been introduced into the midtones and shadows of the Premiere export. Here's a version of the same shot that is cropped in on the woman's face by 400%. This is where the difference between the two starts to become painfully obvious. Again, FCPX is on top, and Premiere on the bottom.
Exported from FCPX
Exported from Premiere Pro
Here's the conclusion that Kroll came to in his post.
After seeing this I can confidently say that I will not be compressing to H.264 using Premiere Pro or Adobe Media Encoder any more. [sic] The image from Premiere is so much blockier, less detailed, and muddy looking, not to mention that the colors aren’t at all accurate. In fact I even did another output test later on with Premiere Pro set to 20,000 kbps and FCP X only set to 10,000 kbps and still the FCP X image was noticeably higher quality, so clearly something is up.
It's really difficult to speculate as to what's going on behind the scenes that's causing such a drastic difference in results between the two programs. However, what is clear is that you should take caution when exporting to h.264 from Premiere and Media Encoder. Regardless of the program that you're using, perform your own tests and make sure that the export process is leaving your media with a visual quality appropriate for the delivery medium.
The good news here is that Adobe is extremely receptive to feedback from their user base, and their Creative Cloud subscription model allows them to roll out updates with a much higher frequency than they could with the boxed version of the Creative Suite. If more people are experiencing these problems and reporting it to Adobe, chances are that we'll see an update with fixes sometime in the near future. With that said, I have no idea how Adobe handles the technical process of exporting, so it could very well take a complete overhaul of how the program encodes h.264 to fix the problem.

Well, I did my own little comparison with a shot from my A7s (XAVCS 50mbps) and seeing as I don't have FCP X I used FCP 7. The AME H264 looks nicer than the FCP one in this instance.
Dropbox - WALKING 444.jpg
Pro Res 444 from Premiere
Dropbox - WALKING AME.jpg
H264 from AME at these settings:
Dropbox - WALKING FCP.jpg
H264 from FCP 7 at these settings:

Anyone suffering from the same panics?

Hello,
Today, I had several kernel panics, mostly while trying to shutdown/restart the computer (but now always)...
No new software/hardware to declare.
I've run Apple Hardware Test but it didn't find anything suspicious.
I was running the GeForce 9400 (not reproduced with the 9600).
Anyone with the same issue?
Thanks for your feedback!
Interval Since Last Panic Report: 220936 sec
Panics Since Last Report:          6
Anonymous UUID:                    F872AE23-65E8-4E4F-AB31-8A6FB12AF931
Sun Oct 30 21:14:12 2011
panic(cpu 0 caller 0xffffff7f81ff4c8c): "AGC GPU REGISTER RESTORE FAILED : rdar://7254528"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.0.16/src/AppleMuxControl/kext/AGCPowerManagement.cpp:928
Backtrace (CPU 0), Frame : Return Address
0xffffff806d593e30 : 0xffffff8000220702
0xffffff806d593eb0 : 0xffffff7f81ff4c8c
0xffffff806d593f20 : 0xffffff7f81ff8a0f
0xffffff806d593f40 : 0xffffff800063c091
0xffffff806d593f70 : 0xffffff800023db2c
0xffffff806d593fb0 : 0xffffff8000820057
      Kernel Extensions in backtrace:
         com.apple.driver.AppleMuxControl(3.0.16)[F23C08B3-9067-32EC-B7AF-BAB315A38518]@0xffffff7f81fe6000->0xffffff7f82005fff
            dependency: com.apple.driver.AppleGraphicsControl(3.0.16)[77F64D0E-E357-3B27-BC05-43EBEBBFE 665]@0xffffff7f81fd1000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[4A5A4624-7A52-3EA0-BB8D-5B265B086727]@0xfffff f7f807cc000
            dependency: com.apple.iokit.IOPCIFamily(2.6.7)[6D54F06A-46B7-37FC-AF22-DE68DC18A1A3]@0xffff ff7f8087f000
            dependency: com.apple.iokit.IONDRVSupport(2.3.2)[6517D9A6-58F5-3CFC-B021-C882306150D5]@0xff ffff7f808f1000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[55FF26D3-292D-3B4B-8AB7-1D25C8B4313B]@0 xffffff7f808b9000
            dependency: com.apple.driver.AppleBacklightExpert(1.0.3)[0A996825-0CA7-3ABF-B492-9826A5F046 0F]@0xffffff7f81fe3000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11C74
Kernel version:
Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
System model name: MacBookPro5,2 (Mac-F2268EC8)
System uptime in nanoseconds: 4175172774091
last loaded kext at 3552732393546: com.apple.filesystems.msdosfs          1.7.1 (addr 0xffffff7f807fc000, size 57344)
last unloaded kext at 3714739231422: com.apple.driver.AppleUSBCDC          4.1.15 (addr 0xffffff7f807ee000, size 12288)
loaded kexts:
com.apple.filesystems.smbfs          1.7.0
com.apple.driver.AppleBluetoothMultitouch          66.3
com.apple.driver.AppleHWSensor          1.9.4d0
com.apple.filesystems.ntfs          3.8
com.apple.driver.AGPM          100.12.42
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleHDA          2.1.3f7
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.AppleMCCSControl          1.0.26
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleMikeyDriver          2.1.3f7
com.apple.driver.SMCMotionSensor          3.0.1d2
com.apple.filesystems.autofs          3.0
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.5d4
com.apple.GeForce          7.1.2
com.apple.driver.AppleSMCLMU          2.0.1d2
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.1
com.apple.driver.AppleMuxControl          3.0.16
com.apple.driver.AppleLPC          1.5.3
com.apple.driver.AppleUSBTCButtons          225.2
com.apple.driver.AppleUSBTCKeyboard          225.2
com.apple.driver.AppleIRController          312
com.apple.driver.MaxTranserSizeOverrideDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.iokit.SCSITaskUserClient          3.0.1
com.apple.iokit.IOAHCIBlockStorage          2.0.1
com.apple.driver.AppleFWOHCI          4.8.9
com.apple.driver.AppleEFINVRAM          1.5.0
com.apple.driver.AirPort.Brcm4331          512.20.18
com.apple.driver.AppleUSBHub          4.5.0
com.apple.driver.AppleAHCIPort          2.2.0
com.apple.nvenet          2.0.17
com.apple.driver.AppleUSBEHCI          4.5.0
com.apple.driver.AppleUSBOHCI          4.4.5
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleRTC          1.4
com.apple.driver.AppleHPET          1.6
com.apple.driver.AppleACPIButtons          1.4
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.4
com.apple.driver.AppleAPIC          1.5
com.apple.driver.AppleIntelCPUPowerManagementClient          167.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1
com.apple.driver.AppleIntelCPUPowerManagement          167.0.0
com.apple.driver.AppleMultitouchDriver          220.62.1
com.apple.driver.IOBluetoothHIDDriver          4.0.1f4
com.apple.driver.DspFuncLib          2.1.3f7
com.apple.kext.triggers          1.0
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.iokit.IOFireWireIP          2.2.4
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.IOPlatformPluginFamily          4.7.5d4
com.apple.driver.AppleHDAController          2.1.3f7
com.apple.iokit.IOHDAFamily          2.1.3f7
com.apple.iokit.IOSurface          80.0
com.apple.iokit.IOBluetoothSerialManager          4.0.1f4
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.driver.AppleSMC          3.1.1d8
com.apple.iokit.IOAudioFamily          1.8.3fc11
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.ApplePolicyControl          3.0.16
com.apple.driver.AppleGraphicsControl          3.0.16
com.apple.driver.AppleBacklightExpert          1.0.3
com.apple.nvidia.nv50hal          7.1.2
com.apple.NVDAResman          7.1.2
com.apple.iokit.IONDRVSupport          2.3.2
com.apple.iokit.IOGraphicsFamily          2.3.2
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.1f4
com.apple.driver.AppleUSBBluetoothHCIController          4.0.1f4
com.apple.iokit.IOBluetoothFamily          4.0.1f4
com.apple.driver.AppleUSBMultitouch          227.1
com.apple.iokit.IOUSBHIDDriver          4.4.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.0.1
com.apple.iokit.IOUSBMassStorageClass          3.0.0
com.apple.driver.AppleUSBMergeNub          4.5.3
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.0.1
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.7
com.apple.iokit.IOCDStorageFamily          1.7
com.apple.driver.XsanFilter          403
com.apple.iokit.IOAHCISerialATAPI          2.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.0.1
com.apple.iokit.IOFireWireFamily          4.4.5
com.apple.iokit.IO80211Family          411.1
com.apple.iokit.IOUSBUserClient          4.5.3
com.apple.iokit.IOAHCIFamily          2.0.7
com.apple.driver.AppleEFIRuntime          1.5.0
com.apple.iokit.IONetworkingFamily          2.0
com.apple.iokit.IOUSBFamily          4.5.3
com.apple.driver.NVSMU          2.2.9
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          165.3
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          331
com.apple.iokit.IOStorageFamily          1.7
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.4
com.apple.iokit.IOPCIFamily          2.6.7
com.apple.iokit.IOACPIFamily          1.4

I'll open a new discussion as the problem is still there; I just get an additional panic:
Interval Since Last Panic Report: 50004 sec
Panics Since Last Report:          1
Anonymous UUID:                    F872AE23-65E8-4E4F-AB31-8A6FB12AF931
Sat Nov 19 21:20:09 2011
panic(cpu 1 caller 0xffffff7f81fe9c8c): "AGC GPU REGISTER RESTORE FAILED : rdar://7254528"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.0.16/s rc/AppleMuxControl/kext/AGCPowerManagement.cpp:928
Backtrace (CPU 1), Frame : Return Address
0xffffff80a302be30 : 0xffffff8000220702
0xffffff80a302beb0 : 0xffffff7f81fe9c8c
0xffffff80a302bf20 : 0xffffff7f81feda0f
0xffffff80a302bf40 : 0xffffff800063c091
0xffffff80a302bf70 : 0xffffff800023db2c
0xffffff80a302bfb0 : 0xffffff8000820057
      Kernel Extensions in backtrace:
         com.apple.driver.AppleMuxControl(3.0.16)[F23C08B3-9067-32EC-B7AF-BAB315A38518]@ 0xffffff7f81fdb000->0xffffff7f81ffafff
            dependency: com.apple.driver.AppleGraphicsControl(3.0.16)[77F64D0E-E357-3B27-BC05-43EBEBBFE 665]@0xffffff7f81fc6000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[4A5A4624-7A52-3EA0-BB8D-5B265B086727]@0xfffff f7f807cc000
            dependency: com.apple.iokit.IOPCIFamily(2.6.7)[6D54F06A-46B7-37FC-AF22-DE68DC18A1A3]@0xffff ff7f8087f000
            dependency: com.apple.iokit.IONDRVSupport(2.3.2)[6517D9A6-58F5-3CFC-B021-C882306150D5]@0xff ffff7f808f1000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[55FF26D3-292D-3B4B-8AB7-1D25C8B4313B]@0 xffffff7f808b9000
            dependency: com.apple.driver.AppleBacklightExpert(1.0.3)[0A996825-0CA7-3ABF-B492-9826A5F046 0F]@0xffffff7f81fd8000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11C74
Kernel version:
Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
System model name: MacBookPro5,2 (Mac-F2268EC8)
System uptime in nanoseconds: 21599304200501
last loaded kext at 14755986063216: com.apple.iokit.IOAVBFamily          1.0.0d22 (addr 0xffffff7f8089d000, size 36864)
last unloaded kext at 14900749753787: com.apple.driver.MaxTranserSizeOverrideDriver          3.0.1 (addr 0xffffff7f81c95000, size 8192)
loaded kexts:
com.apple.filesystems.msdosfs          1.7.1
com.apple.driver.AppleBluetoothMultitouch          66.3
com.apple.filesystems.smbfs          1.7.0
com.apple.driver.AppleHWSensor          1.9.4d0
com.apple.filesystems.ntfs          3.8
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AGPM          100.12.42
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleMikeyDriver          2.1.3f7
com.apple.driver.AppleHDA          2.1.3f7
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.AppleMCCSControl          1.0.26
com.apple.GeForce          7.1.2
com.apple.driver.SMCMotionSensor          3.0.1d2
com.apple.driver.AppleSMCLMU          2.0.1d2
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.1
com.apple.driver.AppleMuxControl          3.0.16
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.5d4
com.apple.driver.AppleLPC          1.5.3
com.apple.driver.AppleUSBTCButtons          225.2
com.apple.driver.AppleUSBTCKeyboard          225.2
com.apple.driver.AppleIRController          312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.iokit.SCSITaskUserClient          3.0.1
com.apple.iokit.IOAHCIBlockStorage          2.0.1
com.apple.driver.AppleEFINVRAM          1.5.0
com.apple.driver.AppleFWOHCI          4.8.9
com.apple.driver.AppleRTC          1.4
com.apple.driver.AppleUSBHub          4.5.0
com.apple.driver.AirPort.Brcm4331          512.20.18
com.apple.driver.AppleHPET          1.6
com.apple.nvenet          2.0.17
com.apple.driver.AppleAHCIPort          2.2.0
com.apple.driver.AppleUSBOHCI          4.4.5
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleUSBEHCI          4.5.0
com.apple.driver.AppleACPIButtons          1.4
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.4
com.apple.driver.AppleAPIC          1.5
com.apple.driver.AppleIntelCPUPowerManagementClient          167.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1
com.apple.driver.AppleIntelCPUPowerManagement          167.0.0
com.apple.driver.AppleMultitouchDriver          220.62.1
com.apple.driver.IOBluetoothHIDDriver          4.0.1f4
com.apple.driver.DspFuncLib          2.1.3f7
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.nvidia.nv50hal          7.1.2
com.apple.NVDAResman          7.1.2
com.apple.iokit.IOFireWireIP          2.2.4
com.apple.driver.AppleHDAController          2.1.3f7
com.apple.iokit.IOHDAFamily          2.1.3f7
com.apple.kext.triggers          1.0
com.apple.iokit.IOSurface          80.0
com.apple.iokit.IOBluetoothSerialManager          4.0.1f4
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.iokit.IOAudioFamily          1.8.3fc11
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleBacklightExpert          1.0.3
com.apple.driver.ApplePolicyControl          3.0.16
com.apple.driver.AppleGraphicsControl          3.0.16
com.apple.iokit.IONDRVSupport          2.3.2
com.apple.iokit.IOGraphicsFamily          2.3.2
com.apple.driver.AppleSMC          3.1.1d8
com.apple.driver.IOPlatformPluginFamily          4.7.5d4
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.1f4
com.apple.driver.AppleUSBBluetoothHCIController          4.0.1f4
com.apple.iokit.IOBluetoothFamily          4.0.1f4
com.apple.driver.AppleUSBMultitouch          227.1
com.apple.iokit.IOUSBHIDDriver          4.4.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.0.1
com.apple.iokit.IOUSBMassStorageClass          3.0.0
com.apple.driver.AppleUSBMergeNub          4.5.3
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.0.1
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.7
com.apple.iokit.IOCDStorageFamily          1.7
com.apple.driver.XsanFilter          403
com.apple.iokit.IOAHCISerialATAPI          2.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.0.1
com.apple.iokit.IOFireWireFamily          4.4.5
com.apple.iokit.IOUSBUserClient          4.5.3
com.apple.iokit.IO80211Family          411.1
com.apple.iokit.IONetworkingFamily          2.0
com.apple.iokit.IOAHCIFamily          2.0.7
com.apple.driver.NVSMU          2.2.9
com.apple.driver.AppleEFIRuntime          1.5.0
com.apple.iokit.IOUSBFamily          4.5.3
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          165.3
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          331
com.apple.iokit.IOStorageFamily          1.7
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.4
com.apple.iokit.IOPCIFamily          2.6.7
com.apple.iokit.IOACPIFamily          1.4
Model: MacBookPro5,2, BootROM MBP52.008E.B05, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.42f4
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.100.98.75.18)
Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500420ASG, 500,11 GB
Serial ATA Device: HL-DT-ST DVDRW GS21N
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24400000 / 2
USB Device: USB Storage, 0x05e3 (Genesys Logic, Inc.), 0x0715, 0x26300000 / 4
USB Device: External HDD, 0x1058 (Western Digital Technologies, Inc.), 0x0701, 0x26200000 / 3
USB Device: FreeAgent Go, 0x0bc2 (Seagate LLC), 0x2100, 0x26400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0237, 0x04600000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8217, 0x06110000 / 4

Is Cisco 2901 router suffering from the heartbleed problem?

I am not quite familiar with networking product. So may be this is a stupid question.
We have recently bought a Cisco 2901 router.
http://www.cisco.com/c/en/us/products/routers/2901-integrated-services-router-isr/index.html
We checked the cisco heartbleed info page.
http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20140409-heartbleed
But Cisco 2901 is not listed neither in "Vulnerable products" or "Products Confirmed Not Vulnerable".
So, is Cisco 2901 vulnerable or not?
Or does it depend on the firmware version? How to check?

Just to add to the above. It actually say's that IOS is NOT affected.
The following Cisco products have been analyzed and are not affected by this vulnerability:
Cisco 1000 Series Connected Grid Routers
Cisco 200 Series Smart Switches
Cisco 300 Series Managed Switches
Cisco 500 Series Stackable Managed Switche
<<<<<<<<SNIPPED>>>>>>>>>
Cisco Identity Service Engine (ISE)
Cisco Insight Reporter
Cisco Integrated Management Controller (IMC)
Cisco Intelligent Automation for Cloud
Cisco IOS XR
Cisco IOS
Cisco IP Communicator
Link: http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20140409-heartbleed

My iMac crashed once and so I held the on/off button and it was fine. It did it again while I wasn't around and my mum unplugged it from the socket.

So my iMac crashed - just left normally with safari while I was listening to music on Pandora and suddenly the screen became full of fray lines and nothing could be seen or done. I then had to force it off by turning it off from the on/off button at the back. I then turned the Mac back on and it was working like normal. I turned it off that night.
My mum then turned it on and was playing spider solitaire like she always have. The same thing then happened to (while I was not around). She does not know much about computers and she couldn't turn it off after a while so she decided to then turn it off by unplugging it from the powerpoint/wall socket. It then would not turn back on.
Whenever I try to turn it on I can hear the usual clicking sound of the CD/DVD side, but nothing happens, it's just a blank screen.
What should I do? I've had this iMac for about 2.5 years almost 3 years now and this only happened last night.
Please help??

Ok so it turned back on, and after leaving it on for less than 30 minutes and was not running any applications and it suddenly turned to a black screen and when I touched the back of it, it was completely boiling. Could it be that something is wrong with the fanning system? If I have purchased this iMac for almost 3 years already. Would I still be able to bring it out to the apple store and have it looked at?
Would I have to pay anything to have it fixed by the apple store?

How can i create multiple apple ids from the same mac

There seems to be a limit on how many apple ids can be created from the same cpu. Trying to create 100 apple ids for a client to use on ipads distributed to employees i found i could only create three or four before i got the message account cannot be created, contact itunes support. Had the same problem creating multiple itunes accounts through the App Store.

I found this discussion because I need to create dozens of Apple IDs for the faculty and staff of the school for which I'm the IT Director.
This is weak.
Apple, PLEASE upgrade the Apple ID system so it represents the current needs and paradigm.
What am I thinking, Apple (like Google) don't follow user discussion forums, except by accident when an employee sees something and is motivated enough to carry the water for users in need.

MaxDB to HANA replication via SLT suffers from 8 characters password limitation?

Hi experts,
We are trying to replicate data from a NW BPM instance (SAP NW PO (Java) on MaxDB with, let's say, sid PO7) via SLT to SAP HANA.
(Version info: MaxDB 7.9, SLT DMIS 2011 SP5, HANA 1.0 SP6 Rev68.)
So we use the ADBC connection route, via the DBCON table.
We want to use the SAPPO7DB user because it is impossible (we think) to have another MaxDB-user connect to the SAPPO7DB (personal) SCHEMA with all the authorizations described in 1778969 - SAP LT Replication Server: Using MaxDB as non-SAP source .
So we resort to the SAPPO7DB user who has a password of 8+ characters. Connecting via SQL Studio is no problem, however via DBCON and testing via ABAP report ADBC_CHECK_CONNECTION we get "sql error 4.008- occured: POS(1) Unknown user name/password combination" errors.
When connecting a DUMMY maxdb user with a passowrd of 8 chars, the connection test is successful. With a password of more than 8 chars, the test fails.
So is the DBCON connectivity indeed suffering from the ancient 8 characters password limitation?
If so, how to fix this? Our workaround would be to change the SAPPO7DB password to a new one of 8 characters in length. Of course, we want the PO system to keep on running, so in which configuration thingy would we need to change this password so the app server can connect to the db? (This is my lack of Java Basis knowledge showing...)
Cheers, Wout

Hi Wout,
I am also performing similar replication from PO to HANA which is not working.
Replication scenario : BPM(PO) -> SLT -> HANA
Please see my post : Table BC_BPEM_EL_ENTRY not found in the control table DMC_MT_TABLES
Please help if you have any idea on this? Thanks in advance.
Cheers,
Naresh

My i7 macbook pro suffers from insomnia

My old C2D macbook never slept, although I had the energy settings set to sleep after 10min of inactivity.
I recently bought a new i7 macbook pro and used the migration assistant to transfer the settings to my new laptop. I soon realized that it also suffers from the same disease, so I guess there is a setting or preference that was transferred and is causing the problem.
I originally suspected that dropbox is the problem, but I have the same symptom, even when dropbox is not running.
Can anybody help me identify what the problem is?
Thanks a lot!

Have you called Apple technical help? I had a few issues recently that didn't even involve Apple but it was software allowing me to use external hard drives with no partitions on Mac and PC. It was 3rd party software and they figured it out as well as giving me all the sites I needed to get it all working. I have had other questions as well and they seem to work on it until it is figured out.

Does the 2012 Mac Pro have 2 CPU socket always? If I buy one CPU setup, can I upgrade it later to 2 CPU?

Does the 2012 Mac Pro have 2 CPU socket always? If I buy one CPU setup, can I upgrade it later to 2 CPU?

If money is no object, OWC will swap 2010 or 2012 Processor shelves for whatever you want as long as you have a working Mac Pro 5,1 shelf to swap and a ton of money.
http://eshop.macsales.com/shop/turnkey/MacPro/2010_Xeon_Processor
The basic charge is US$949 starting from the 2.8 Quad.
• to move up to the 3.33 hex add US$550 to the base price for a total of about US$1500.
• to move to dual Quads or dual hex ADD $1470 to $4250 to the base price.

What does the message ``Bad CPU type in executable'' mean in terminal window?

All the time I have been using TEX on my computer to handle mathematical symbols.
I have several macintosh machines.
Usually I used tex on the terminal (rather than texshop or texwork).
Quite recently when I input ``platex filename.tex,’’
I received the message ``Bad CPU type in executable.’’
On another machine, I receive the message which says “platex” failed: the
PowerPC architecture is no longer supported.
I have no idea why this happens.
Will anyone help me?
It occured when I typed ``platex foo.tex,'' in an attempt to compile a tex file.

PowerPC architecture is no longer supported.
This mean you have an old executable that was compiled for a Power PC Mac (the ones before they got the Intel chips). On systems running 10.6 (Snow Leopard) there was code called Rosetta that was able to run the PPC code on the Intel CPU, That went away in 10.7
Sounds like you recently upgraded to 10.8 from 10.6 or earlier and copied the binary to the new OS.
If you compiled the code yourself you need to recompile it for the new OS. If you installed the binary you need to go to the site you got the binary from and see if there is a newer version for Intel Macs.

My hard drive went bad and I lost a lot of purchased items from the iTunes store. I want to re-download them but can not. They still show up on my purchased items. How do I solve this?

My hard drive went bad and I lost a lot of purchased items from the iTunes store. I want to re-download them but can not. They still show up on my purchased items. How do I solve this?

Update to iTunes 10.3.1
After you have finished, you can re download your iTunes purchases without having to re purchase.
iTunes 10.3.1
" Download Previous Purchases. Download your past music purchases again at no additional cost. Your purchases are available in the iTunes Store on your Mac or in the iTunes app on your iPhone, iPad, or iPod touch. Previous purchases may be unavailable if they are no longer on the iTunes Store."
"Available on iTunes in the U.S. and Canada only. Title availability is subject to change."
From here. http://www.apple.com/itunes/

I purchased bad boys 1 and 2 from the itunes store and they would not play so i restarted my laptop and now they are not on my itunes

i purchased bad boys 1 and 2 from the i tunes store but they would not play so i restarted my laptop and now they are not even on my itunes

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Delete the songs and redownload:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

My ipod will not charge from a wall socket but will charge using the same cable if the usb end is plugged into a computer or an airport power source. My iphone and ipad charge fine on the same cable usin ghte same wall plug in the same wall socket?

My ipod will not charge from a wall socket but will charge using the same cable if the usb end is plugged into a computer or directly into an airport power source. My iphone and ipad charge fine on the same cable using the same wall plug in the same wall socket. This makes no sense but I see that it has been posted as a problem elsewhere. This must be due to some kind of degredation of the Ipod. . It is not fixed by IOS resets as others have noted.
Has anyone asked Apple directly about this?

Hi there Apples or Pears,
I would recommend taking a look at the troubleshooting steps found in the articles below.
Charging your iPod battery
http://support.apple.com/kb/ht1384
iPod's battery doesn't charge
http://support.apple.com/kb/ta44551
-Griff W.

My TX2 suffers from the bad cpu socket syndrome Lawsuit?.

Similar Messages

Maybe you are looking for