My unit will not turn on. was working turned unit off and it will not turn back on.
My I-pad touch was working. Turned unit off and charge unit and now it will not turn on.
Try here:
iPod touch: Hardware troubleshooting
Similar Messages
-
How do I get the keyboard in the notes section of the ipad to pop up? It was working all day today and then stopped.
I find it's touchy. Tap anywhere on the note to bring up the keyboard. If you tap and hold, you won't bring up the keyboard. Just tap momentarily.
If you can't get it to work, try restarting your iPad. Press and hold the Sleep/Wake button until a red slider appears, then drag the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
If it still doesn't work, try resetting your iPad. Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears. -
After downloading and installing additional content, no sound will play. Logic has no connection to sound library. No level meter activity.
Right before i installed the additional content I was working on a project, and everything was OK. What is wrong. How do I make Logic reconnect to the instrument files?Whitelab Records wrote:
So, 20 views and nobody's anybody the wiser?
A small update to this issue....
I have been trawling the forums to find an answer but to no avail...
And... I've tried exporting and bouncing individual stems and the full session, either by muting all bar the stem or soloing the stem.....and still nothing.
Same problems.....everything is audible in audition but nothing plays on playback.
Since the 'prelisten' channel strip is Solo safe this would indicate that you have a track or channel strip soloed somewhere else, out of sight. Are the Mute buttons on your channel strips blinking?
To view all objects in your mixer, click the button. You may have to scroll sideways to check the whole mixer. -
I bought Apple TV3 , it was working fine until today and stopped showing the status light. Please help.
try another cable it's a std cable that most consumer electronic use
if that does not help then I would try to connect it by a microUSB cable to see if I could restore the firmware from a computer running itunes
if that does not help then I would say that the appletv have died -
Well my ipod 4th gen was updated it shut off and now when i try to turn it on it stays on the apple logo for abit then gets stuck on a white screen od blue or mixed colores i really need help fixing this plzz help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have a iMac was working with no problems and suddenly without any reason became attached and there is a loud voice what to do
Go under the apple logo into system preferences, then select either accessibility or universal access and turn voice over off
-
Bridge CC keeps crashing on start up but was working last week - Any Ideas how to get it back. Have tried uninstalling and re installing software. All other CC software working fine (Mac)
Also some problems since the CC2014... For me i can launch bridge but the crash occurs when i try to change access to any bridge preference... i open a discussion about it
-
My adobe is now making my mouse zoom instead of scroll. This was working perfectly yesterday. How do I change it back?
What is "My Adobe"? Did you try to reboot your system?
-
I updated my ipad mini to iOS 6.1.2 and have not been able to udate my apps in the AppStore since. It say I have updates available but the page remains blank. I have tried switching the unit off and on and to no avail. Can anyone help?
Try this:
1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down until you see the Apple Logo. -
# Question
when i try to get my email at mail/google.. wildblue I get a small box in the upper left area. It was working OK this morning and started this in the afternoon. I can access my mail fine in Internet ExployerGood luck with this!!!
EVEN USING what WAS my Username, this is the exact problem I am having having entered my correct ID and Password.
Rgds
Rod -
My IMac 21.5 mid 2010's HD is going bad on it, after upgrading to mavericks it slowed way down and after it shut off and now won't come back on, I call apple support and they told me to bring it in but the nearest store is about two hours away. They said I need it to erase my hard drive but I have too many family pics on it.
would Seagate Barracuda ST2000DM001 2TB Serial ATA Hard Drive - 7200RPM, 64MB, SATA 6Gb/s worked on it? I could replace the internal and get an enclosure for the original until I get the pics out of it?
Please advise, it's like five years of family pics I don't wanna loose them and I am worried.
Thanks
Al FlorezA Brody,
I really apprecate your very quick respond, Its too late to back up as of now, my hard drive wont load at all so I cannot follow your instruction to back it up. Learn a hard lesson but I will from now on following your link.
Also my hard drive it is not available to do the free exchange program.
I read the OWC instruction on how to replace the drive I was just wondering if the 2TB would work on it instead of the 1 TB they offer, I specifically asked for the Seage Barracuda because I had great experiences with it on PCs.
Again, Thank you -
Should iphone 4 receive messages when turned off and display them when switched back on
should iphone 4 receive messages when turned off and display them when switched back on
It's up to the cellular carrier, but I believe most (if not all) will enqueue the messages when your iPhone is off.
So generally speaking, a few minutes after you turn your iPhone on, your messages should display. Similarly, your voicemails would arrive. -
My one day old MacBook pro just turned off and it won't come back on either through mains or battery power it's as if the unit is completely dead. Even with the mains plugged in there is no green or orange light to say its charging or full charged. The battery was fully charged anyway seconds before the screen went off.
When you say no green or orange light are you refering to the little led on the magsafe connector? That could mean either the charger/cable are bad or the circuitry in the MBP is faulty. Since this is a brand new MBP best bet is to take it back to an Apple Retail store and have the genius bar staff take a look. They can determine if it needs to be reparired or replaced.
-
Just upgraded to latest iOS and my iPad does not come back up - the following appeared as the first thing after turning back on. It displays a line from the power/USB connector to an iTunes logo and then goes off and after some minutes comes back on. I cannot reset it or anything else. It is completely non-functional.
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers, Tom -
iMac 10.1, OS X 10.7.5
4 GB RAM (2 of 4 slots used)
201 GB free on 999.35 GB HD
The iMac gets slower the longer I use the Internet - to the point that it takes several seconds for each typed character to appear. This is very noticeable with the online browser game Forge of Empires. But, it happens even if not logged on to that game.
Turning the iMac off and restarting it brings it back to what seems like full speed for an hour or so. Then, it starts to noticeably slow down again.1st thing : from my point of view upgrade your mac os to latest version.
(their is mac os x mavericks from apple its free for upgrade so download it and install it.)
(https://itunes.apple.com/in/app/os-x-mavericks/id675248567?mt=12)
2nd thing : then upgrade your all browser plugins to latest version.
3rd thing : and use ccleaner to keep clean your mac from junk data or other unuseable data that are created.
(http://www.piriform.com/mac/ccleaner)
4th thing : verify and repair your disk permissions with the use of disk utility or ccleaner
i am sure your computer recover speed.
Maybe you are looking for
-
Time machine full (yes, I know its been posted before but I have no answer)
I have a macbook with 80GBhd, my time machine drive is a USB 80GB drive. I have 15GB free on my local machine and TM has 6.67. So its telling me that it needs 10.4GB to complete its backup.... and is no longer backing my drive up. I want to say "Hey,
-
I have recently been having an error message pop up every now and then in photoshop CC. It usually happens after editing every other photo. It goes away if I close out of photoshop and load it back up. But then it comes back after another couple p
-
Incomplete Recovery and Read Only
Ok, I seem to be missing something. I've performed an incoplete recovery to a specified SCN. Everything is great if I open the database with resetlogs. But, the documentation (see quote below) says I can open the database as read only to check the re
-
Help - slowing/performance issues
I've been using imovie with no problems until just recently my little 10 minute movie won't play back properly from the timeline. It looks like it's in slow motion & rebooting my computer doesn't help. Also, when I choose 'extract audio' from a clip,
-
Is SELECT FOR UPDATE lock ever released?
Hi, Does any one know whether the lock acquired by SELECT FOR UPDATE will ever be released if user session ends without commit or rollback(e.g. crashed)? If it does, is there a default parameter to control the maximum wait time for Oracle to release