My updater shows only the restore button

i downloaded the old updater again because it doesnt work with the itunes 7 etc.
i have now the updater 28.06.2006
it only shows the restore button.. i clicked to it..
it restores my ipod.. and says that i should wait for a while.. and then it shows the restore button again..
when i connect my ipod itunes start automattcly (itunes 6) but ma ipod doesnt show up on the left side...

i ve tried so many things....
i will tell my "story" from the beginning...
my ipod is new.. i had everything in it.. videos films musics.. etc...
then i had a problem.. it shows the "www.apple.com/support/ipod" link.. well i took it to an apple center here and they restore it etc..
everything was okey... as i was home it didnt recognize my ipod.. i dont understand why... my pc reconized it but not itunes.. i saw that there is a new version for itunes.. (itunes 7) so i download it...
my ipod shows up... in itunes! it says that i should restore it again.. well i said yes...
and i couldnt see my ipod in itunes again..
i look up in the diagnostic where i saw the ipod..
when it regnozise my ipod there why not in the left bar..
i ve tried all the options that i have read here...
i uninstall the itunes 7 and install itunes 6 ...
i instal the old updater etc...
reset, restore.. everything... but nothing works...
the funny thing is that when i connect my ipod to the pc itunes opens automattlicly.. but you know my problem there is "no ipod"...
so i don't know what to do.. my ipod is 1 week old =)
and i could only listen to it 1 time funny isnt it??
when somebody knows a solution.. pleas help...

Similar Messages

  • What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

    What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • Restore Session no longer works properly, the window shows as blank, and the restore button is greyed out. On the history tab, the three associated links are also greyed out and unusable. How do I restore functionality?

    Just as the question says, I get a restore session tab whenever I open Firefox, but it no longer shows my tabs, and the Restore button is greyed out. If I open and then close a side, it no longer shows up in the "recently closed tabs" in the History menu. "restore previous session" and "Recently closed windows" are also greyed out.
    I'd like this function to work correctly again.

    Make sure that you do not use Clear History to clear the <i>Browsing History</i> when you close Firefox.
    *Tools > Options > Privacy: History: [X] Clear history when Firefox closes > Settings
    *https://support.mozilla.com/kb/Clear+Recent+History
    Using the "Show my windows and tabs from last time" setting is a more reliable way to restore session data.
    * Tools > Options > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

  • Unable to text after update.  Also, the dock buttons are frozen.  I've tried restoring, but it doesn't fix problem.  Any suggestions?

    I am unable to text after update. Also, the dock buttons are frozen. I've tried restoring, but it doesn't fix problem. Any suggestions?

    You posted in a thread that has not had any activity in 2 years!  Please start your own topic.  Also, please describe in detail all you have attempted to do in order to resolve the issue. 
    It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions. 
    Please complete or update your system profile so the users here can properly help you. 

  • My ipod has a black screen with only the resisitive button on show. HELP

    i dropped my ipod touch and the restart button doesnt work, so i got the resisitve touch and now my ipod has a black screen with only the resisitive button on show. HELP ME PLEASEE
    PLEASE HELP OR IM GOING TO END UP THROWING IT AWAY
    Message was edited by: Sadiiaa_

    Try:
    - iOS: Not responding or does not turn on
    Where it says place the iPod in recovery mode use this program.
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT201210 Itunes wont let my iphone restore, an unknown error occured (2003). I only pressed restore button.

    Itunes wont let my iphone restore, an unknown error occured (2003). I only pressed restore button.

    Hey there Palmer
    How are you?
    Well, I have an iPod Classic, it gave me the error -1436 error and would not restore on iTunes.
    I did the following:
    My Boss (@work) has a fairly old iBook but it has OS-X, so I decided to give it a try and connected my iPod to it.
    The system showed a window telling me that the disk is not MAC formated and needs to be validated prior further action. Snce it is a Mac product, I thought "yeah, go ahead".
    It then opens the disk manager utility for the Mac and showed the disk. It's window has some tabs, one is to verify the disk, so I verified it. Guess what, it had some invalid clusters.
    Then I formatted the iPod to OS-X Plus file system (next tab to the right). After formating the iPod, I "ejected" the iPod and reconnected to my PC. The Windows iTunes found an iPod with Mac file system and asked me to restore it. As I clicked on the "restore" button, I crossed my fingers as this was the last resource I have.
    Finally, after the file extraction was done, it began to restore the iPod!!
    I'm so happy about being able to restore the iPod that I decided to share with all you guys this solution as it is the most usefull, in my opinion.
    Hope you can find someone with an iBook or a desktop Mac, so you can fix yours.
    If it works for you, make sure to share the tip!!
    Kind regards
    Salvador Rivera

  • Where is the restore button in iTunes

    I cant see it anywhere, even when i clock on my iPod nothing is coming up, except a list of everythin thats on it and you cant do anything on that page...help!

    What version of iTunes are you using? In iTunes 7 if you click on the iPod icon when you are connected to iTunes that should bring up the preference tabs in the main pane on the right. The restore button is on the first tab which is called Summary. If you are using iTunes 6 then the iPod is restored using the separate iPod Updater program:
    Restoring iPod to factory settings with iTunes 7
    Restoring iPod to factory settings with iPod updater

  • My emails show only the header and no content or attachments ?

    My emails show only the header with no content or attachments on my iPad?

    Quit the mail app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    If that doesn't work, reset the iPad.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Itunes gives me the message that it has detected an ipod in recovery mode, you must restore the ipod.  when I clikk the "restore" button the download begins and after 30 minutes, I get the original message that itunes detects an ipod in recovery mode.

    iTunes gives me the message that it has detected an iPod in recovery mode and that I need to restore the factory settings.  When I click the "restore" button iTunes downloads the software.  This is a 30 minute process.  Once the download completes, I get the same message "iTunes detects an iPod in recovery mode....".  I'm running Windows Vista and ZoneAlarm security software.
    I've tried this restore function multiple times and still get the same results. 
    I've also tried resetting the iPod by holding the wake/sleep button and the Home button at the same time.  The iPod turns on but shows the icons of a usb cable connecting to iTunes.
    Any help would be greatly appreciated.

    This maybe yuor problem:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .

  • I know its been asked before, but really, where is the restore button????!!

    OK clever people... lets get this straight:
    I start up itunes (updated, downloaded this morning)
    I plug in ipod
    Then i click on my ipod in the source list
    I then see all my music appear in a long greyed out list
    AND, where is the summary tab? What is the SUMMARY TAB?
    Where is the restore button? It is NOT there.
    Really!
    Can someone screen dump me itunes with the restore button present, so i can actually see that it does exist?!?!?!!?
    Dazed and Confused
    (but still love my ipod!!!!)

    I have iTunes 6.0.5 and I have the iPod updater on the Start menu under iPod.
    Start>iPod>iPod Updater
    Presumably intalled with the iTunes software?
    If not check here
    http://docs.info.apple.com/article.html?artnum=304215

  • Safari 4.0 is slower to show only the first web site

    Safari 4.0 is slower to show only the first web site. Once Safari is open, the first site may take 4 to 5 seconds to show, and Console indicates:
    11/06/09 17:15:09 [0x0-0x99099].com.apple.Safari[1029] Debugger() was called!
    Subsequent sites load in just one second or so (and Console does not show any messsage).
    If I quit Safari and open it again, the same issue arises: it takes longer to show the very first site (whatever it is) but not the subsequent ones (for which it is quicker), and Console shows a similar string on such very first site (but not the subsequent ones). Other examples of such string:
    11/06/09 17:15:58 [0x0-0x9b09b].com.apple.Safari[1033] Debugger() was called!
    11/06/09 17:15:58 [0x0-0x9b09b].com.apple.Safari[1033] Debugger() was called!
    11/06/09 17:17:06 [0x0-0x9c09c].com.apple.Safari[1036] Debugger() was called!
    How to prevent such Console message and make Safari also quick to show the very first page or site after opening Safari?
    Thanks.

    Not to get your hopes up, did you ever hear or figure out any resolution to this. I have a (slightly) similar issue passed along from one of my bosses, that when he upgraded to 4.0.2 it started causing issues with FTP logins through Safari. He would have to enter passwords multiple times on the same site. So initial entry worked and then every subsequent event needed a password entry. Just curious if this could be part of your problem. I tried to emulate the problem on my machines and only on the one I have the 4.0.2 update does it happen.

  • My fire fox download helper not detected current video on you tube. It's always shows only the first video which i was downloaded.pls help

    My fire fox download helper not detected current video on you tube. It's always shows only the first video which i was downloaded.pls help

    You need to refresh the page (F5) to update the items in the download menu. Apparently YouTube refreshes the page in such a way that the extension doesn't gets notified, so you need to refresh the page manually if you want to download a media file from this page.

  • When Mozilla upgraded, it complained that my Adobe Flash Player also should be upgraded. The upgrade downloaded but no icon appeared, and when I found the EXE and ran it, only the Quit button in the dialog window was an active link, so I got nothing.

    The Installation instructions allow for Firefox or IE. I have both, but the IE path was dead. The Firefox path said to use the icon on the desktop - but there is no such icon. The downloaded executable is there, but when I invoke it and read the license agreement, I still only have the dialog window with Quit and Install - however, only the Quit button is live.

    1. There are two different versions of Flash. The ActiveX version for IE, and the Plugin version for Firefox and other browsers. You need to install both versions if you continue to use IE along with Firefox.
    2. Did you close Firefox before attempting to install Flash? Did you download it to the Desktop, because it wouldn't end up there automatically with the default download settings in Firefox?
    Tools > Downloads = does that download show in the Downloads window? <br />
    If so, right-click on it and use '''Open Containing Folder'''. <br />
    Does that downloaded file have '''-ax.exe''' at the end of the name of that file? <br />
    If so, you got the ActiveX version and need to download it again. <br />
    If not, close Firefox while keeping that "containing folder" open. <br />
    Wait about 20 seconds and then try installing Flash.

  • HT4623 where is the restore button to unlock my phone

    Where is the restore button on i tunes tolock my i phone?

    Select your device in iTunes sidebar under Devices. Click on the Summary tab in the main window. You should now see a Restore button.
    IPhone, iPod Touch, and iPad iOS Compatibility
         Device                                       iOS Verson
    iPhone 1                                       iOS 3.1.3
    iPhone 3G                                    iOS 4.2.1
    iPhone 3GS                                 iOS 6.1
    iPhone 4                                       iOS 6.1
    iPhone 4S                                    iOS 6.1
    iPhone 5                                       iOS 6.1
    iPod Touch 1                               iOS 3.1.3
    iPod Touch 2                               iOS 4.2.1
    iPod Touch 3                               iOS 5.1.1
    iPod Touch 4                               iOS 6.1
    iPod Touch 5                               iOS 6.1
    iPad 1                                           iOS 5.1.1
    iPad 2                                           iOS 6.1
    iPad 3                                           iOS 6.1
    iPad 4                                           iOS 6.1
    iPad Mini                                      iOS 6.1
    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS to Version 6.0.x from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

  • What to do when the restore button is unavailable in Time Machine?

    I've had no problem with backups in the past, but my list of backups now (dating back to June '11) has no Restore button available. For any of them. Including today's backups. What should I do?
    Edit: The restore buttons appears when I choose a file from inside the Time Machine. I guess I was forgetting how Time Machine works. I was under the assumption that when I chose a backup I could restore the entire thing. Does that mean it is impossible to a total restore of a Mac from Time Machine and only individual files and folders?

    Thanks, I also read around a bit more and found this
    http://support.apple.com/kb/HT1427

Maybe you are looking for

  • Error While Adding a Software Component

    Hi All, While adding a software component in the SLD, i am getting the below error. Can anybody please suggest me the possible reason for the same. Storing changes to persistence failed. Please check both your J2EE engine and database are in a health

  • Contact not selected when sending SMS

    Hello, I am using PC Suite 7.0.8.2 on WinXP Sp3 (standard user or admin: no difference); Nokia 6080; connection: USB. Evereything seems to be ok but I have problems when composing/sending sms: if I key in the phone number my sms is sent; but if I cho

  • JBO-25001 Business Components Error

    Hi to all, I am experiencing some VERY STRANGE behaviour in JDeveloper ADFBC. I am using Jdeveloper 10.1.3.1.0.3984 to build an application using ADF and Business Components. I have four tables, JAAS_USERS, JAAS_ROLES, JAAS_REALMS and JAAS_MAPPINGS.

  • How to clear hard drive space?

    my hard drive is "full" i need a way to clear space or compress files, without taking them off of my computer, Ive already put all my photos and movies on an external hard drive all thats left is 25 gigs of music and applications really. hard drive i

  • How to popup email template in CRM 2013

    Hi, I am doing customization in CRM 2013. I have an entity named "Agreement" and it has a optionSet field named "SendEmail" it has two values "Yes","No". My scenario is that When I select "Yes" then Email form will display in popup window. Please tel