My updates are failing. Adobe application manager may be damaged. I have downloaded and installed a new copy and the problem persists. Please help.
I am trying to update Photoshop CS6 in order to read my camera's RAW files. It is a camera that is supported by Adobe Photoshop CS6. However, when I try to get the Adobe Application Manager to update the software, it fails to do so. (The spinning wheel tells me it is checking for updates and then quits, saying that "Update Failed - Updates could not be applied. Adobe Application Manager may be damaged. Download and install a new copy of Adobe Application Manager.")
I have tried to reinstall the Adobe Application Manager 8.0, which gives me the following error message "We've encountered the following issues. Installer failed to initialize. Please download Adobe Support Advisor to detect the problem." However, when I go to the link provided to download the Adobe Support Advisor, this piece of software NO LONGER EXISTS. "
The Adobe Support Advisor has been discontinued
The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation."
So, I have gone to the forums and took the recommended step to update my software manually - getting the update Photoshop_CS6_13_0_6upd-2.dmg. However, this update also fails stating that my Adobe Application Manager may be damages. Download and install a new copy of Adobe Application Manager. Which puts me right back where I started.
I have also taken the step of completely reinstalling Photoshop CS6. This did not solve the problems outlined above.
Please help!
reset your preferences:
dreamweaver: http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
indesign: https://forums.adobe.com/thread/526990
lightroom: http://www.lightroomforums.net/showthread.php?14226-Resetting-%28or-Trashing-%29-the-Light room-Preferences-file
photoshop: https://forums.adobe.com/thread/375776
if that fails, uninstall ps, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and reinstall. then use the manual updates.
Similar Messages
-
I got a new laptop and installed FM10. To avoid getting the License expired error, I tried installing TCS update 3. But the system displays an error Adobe Application Manager may be damaged. I re-installed Adobe Applicaiton Manager, but still the same error.
Adobe support provides free installation assistance. Call them.
Art
Art Campbell
[email protected]
"... In my opinion, there's nothing in this world beats a '52 Vincent and
a redheaded girl." -- Richard Thompson
No disclaimers apply.
DoD 358
I support www.TheGrotonLine.com, hyperlocal news for Groton MA. -
This morning when I tried to open my CC2014 Photoshop, it started to open, then quit suddenly. Same with Dreamweaver and InDesign. I am a professional and do not have the time to screw around with this. When I tried to run CC app, I get an error that says "Adobe creative cloud is needed to resolve this problem. However, it is missing or damaged. Please download and install a new copy of the Creative Cloud from 'http://www.adobe.com/go/adobecreativecloudapp'." I did so and tried to run the app and got the same error. I tried the cleaner and it removed all of my apps, then I tried to install again, and got the same error. I am getting desperate now, I have clients waiting for their projects. I need help, please.
Allisonf55952352 have you utilized the steps listed in Error: "Failed to install" | Creative Cloud Desktop to resolve the current error? If not do you have any questions regarding the steps listed with the document?
-
Hello guys... i get this message up. please help!!!
Hi Willie,
Please download and install the Adobe application manager from the link below:
MAC: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
WIN: Adobe - Adobe Application Manager : For Windows : Adobe Application Manager
Regards,
Sheena -
when i reinstall the older version it works fine,but when i update it to latest version it will stop working nothing happens when i click on it
Still the same,i downloaded from the main sit and installed it after that it will start and check add ons compatibility and then just nothing.
-
How do I open the updates window in "Adobe Application Manager"?
How do I open the updates window in "Adobe Application Manager"? Or can I or should I....??
I am a brand new Cloud member. I heard of the Retina update. Assuming this was where the updates would logically appear I went to the "Adobe Application Manager" app first. Without closing the "Adobe Application Manager" I opened Photoshop and went to the help menu and selected "Updates..."; a second window opened in the already open "Adobe Application Manager".
I selected update all.
The result is below:
DW CS6 12.1 Creative Cloud
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Dreamweaver CS6 12.0.1 update to address critical issues
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Photoshop 13.1 for Creative Cloud
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe InDesign CS6 8.0.1 update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Bridge CS6 5.0.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Illustrator CS6 Update (version 16.2.0)
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
DPS Desktop Tools CS6 2.05.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Dynamic Link Media Server CS6 1.0.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Photoshop Camera Raw 7.2
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Extension Manager 6.0.4 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Media Encoder CS6 6.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Now, I closed the "Adobe Application Manager" and opened "Photoshop" again and again selected "Updates..." from the help menu. The "Adobe Application Manager" opened again with just one window this time and the updates happened correctly.
I was hoping one of the updates would be to the "Adobe Application Manager", I don't think so.
So, If I were you I wouldn't select "Updates..." from an Adobe app unless the "Adobe Application Manager" is closed until they fix it...
Current version: Adobe® Application Manager - Version 7.0.0.128 (7.0.0.128) Note the Two windows in the "Adobe Application Manager" in the attached image.The updates are currently available by going to Help>Updates within the Application. Once you invoke the Updater, which is a component of the Adobe Application Manager, it will locate and apply the updates. It looks like most of your updates have failed to install. I would recommend you begin by trying to apply the updates that are available on our product update page at http://www.adobe.com/downloads/updates/ and seeing if you face the same difficulty.
If you continue to experience problems with applying the updates then please review your installation log to determine the cause of the failure. You can find details on how to locate and interpret the installation log at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html. -
Tried to check on updates for CS6 64 bit - Received message saying application manager may be damaged - download and install new copy - when I try this I receive message ERROR 404 I have a PC - any help would be gratefully received - thanks - William
reset your preferences:
dreamweaver: http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
indesign: https://forums.adobe.com/thread/526990
lightroom: http://www.lightroomforums.net/showthread.php?14226-Resetting-%28or-Trashing-%29-the-Light room-Preferences-file
photoshop: https://forums.adobe.com/thread/375776
if that fails, uninstall ps, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and reinstall. then use the manual updates. -
CS6 not starting says "Adobe Application Manager Required" but I already have it AND I reinstalled.
CS6 not starting says "Adobe Application Manager Required" but I already have it AND I reinstalled. All I know is that I have CS5 on my computer and it's not a permission error. Please help
We are not ignoring you...we are checking into it! Sorry for the delay.
Pattie -
When creating a new site column of the managed meta data type in SharePoint2010, and you select "customize your term set", you are presented with one of the following errors:
- This operation cannot be completed. The term store may be unavailable.
- Failed to read from or write to database. Refresh and try again. If the problem persists, please contact the administratorHi,
I have been facing the same issue, however managed to resolve it.
This is due to the uncommitted statements. From Powershell try running the following script
#Connect to Central Admin, Replace the url with the environment specific URL
$taxonomySite = get-SPSite http://centraladmin:40000
#Connect to Term Store in the Managed Metadata Service Application, Ensure you put the right Metadate service application name
$taxonomySession = Get-SPTaxonomySession -site $taxonomySite
$termStore = $taxonomySession.TermStores["Managed Metadata Service"]
write-host "Connection made with term store -"$termStore.Name
#Connect to the Group and Term Set
$termStore.RollbackAll()
Hope it would help -
How to remove preinstalled files of adobe photoshop from my mac mini so that i can install a new version of the same software.The previous version was removed using the app cleaner software.Could not continue installation of the new version because of the existance of files from the previous version.plz help
What "app cleaner software" ? I ask because installing Photoshop over a previous version has never been a problem. Perhaps your difficulty stems from another source, eg. "cleaner software" ?
If you look in your hard drive, at the root level there is a Library. In there is a folder called Application Support, and in that you will find a folder called Adobe. Files from your previous version are there.
However, I urge you to call Adobe support to make sure you are not doing anything that would mess up other Adobe applications.
http://www.adobe.com/support/connect/connecthostedsupport.html -
I've been building a site in Muse successfully until today when I get this error message in the browser, publishing to business catalyst as a test bed:
Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.
Clearing the cache has no effect and I have checked the assets and there are no error symbols. This happened after trying a google translate code in the <head> and a HTML snippet on the master template, I've since removed it but that the last action I took that I can think may have had an effect.
Viewing the source of the page in Safari hash;t helped other than it shows ALOT of html (including some elements i can;t relate to in my site design) and states there are three errors:
[Warning] Invalid CSS property declaration at: ; (index.html, line 1)
the site is Kingsdown Holiday Homes - Self Catering Chalet Rental at Kingsdown Park, Kent | Home
I started this site in Muse CC and then recently upgraded to Muse CC 2014, and I had install issues so deleted the original program (this then forced the download of the new version which was not automatically downloading even though CC notified me that an update was required.
Any information gratefully received.
Thanks,
AndrewSame problem here but it has nothing to do with a cellular connection.
Created the site http://www.blackdot.com in Muse 7.4.3 with no issues. Just updated the .muse file today to Muse CC 2014 and reloaded to our web server. Now I am getting the error "Some files on the server may be missing or incorrect." when viewing the site from the latest version of all browsers (Safari, Firefox, Chrome) on a Mac and all browsers on a PC (Safari, Firefox, Chrome, Explorer), also mobile Safari on an iPad.
My connection is wired broadband, not a mobile or wireless connection. I am not using the Muse "Upload to FTP host…" option and will not be using it. I am simply exporting as HTML and copying the files to my server. I have deleted all files from the web server and recopied the updated site with the same error result. This is the exact same procedure I used to load the initial site with the prior version of Muse.
It does not seem like there is an existing solution to this problem although many others are experiencing it. It looks like I will need to manually edit each page to remove the error message coding from the html files. Any tips on how to strip out the alert message from the html?
UPDATE
For anyone else experiencing this issue, I was able to edit the .html files for my site to remove the code responsible for this alert message. If you wish to edit your .html files you must make the same edit to every .html file in your site export including the top level "index.html" and all .html files inside the "tablet" and "phone" folders if you have them.
The coding to remove is at the bottom of each .html file:
(Muse.assets.outOfDate.length||Muse.assets.required.length)&&alert("Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.")
Make sure you do not remove any semicolons or braces {} when making this edit. Just remove the text shown above. You will obviously need to remake these edits if you export your site as HTML in the future. -
When I publish my site on one specific page where I've added {tag_pagecontent} I get the error:
'Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.'
I'm trying to get a blog module going, I've even deleted the html insert bog with the tag in and re-published which then I don't get the error but as a result no blog either. But then I add the tag in again and publish the error comes back. I've used the dev console and it says that my musicians sample.css is out of date but why is it only out of date when I add in html to my muse site?
HELP!!!! I've searched other threads and to no avail I'm publishing so no direct ftp going on. the only thing I changed in business catalyst was the module stylesheet in order to style the blog. I've tried uploading and replacing all files nothing seems to work. the site is here:
http://www.musicstudentsforhire.co.uk/musicians-samples.html
It's only this page as it has the blog on. Also I've noticed when I've re-published occasionally it will show the mobile version on my desktop and not the desktop version??? no idea why that's happening so I've had to turn that off. any explanation on why that is happening would also be much appreciated.I haven't received an answer as of yet, I'll post t on here when I do. I de-activated the mobile site because it's my clients site so he needs it to be operational during the day. I hope someone gives me an answer soon.
-
Firefox has been crashing all the time after I updated to the newest version. I tried to uninstalled firefox and all addons. Restarted the computer to reinstall Firefox and it's still crashing all the time. Please help.
https://support.mozilla.com/en-US/kb/Firefox%20crashes#w_get-help-fixing-this-crash
Type '''about:crashes''' in the URL bar and hit Enter. <br />
Click the hyperlinks to bring up the Crash Report pages and copy'n'paste the URL of each of those reports into the message box here. We'll see if we can help you figure out what is causing those crashes to happen. -
The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk.
what does this mean?? why can't i backup before i have to get my hard drive replaced?!!? arghhbrahr3 wrote:
I am getting the same error message: "The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk." I don't have a TC but rather an external drive, which is twice the size of my harddisc, and it still has plenty of free space. The problem has lasted for 5 days. I even used a different external drive -- still same error message. Needless to say that I have run Disc Utility several times. Can anybody help? Thanks
I am having issues with some USB drives on Mountain Lion.. work perfectly on another computer with Snow Leopard.. not even recognised by ML.
Is the disk recognised?
If so and TM cannot pick it up.. do a full reset of TM and try again.
A4 http://pondini.org/TM/Troubleshooting.html -
Is my iPhone 4 greyed out wifi and non working bluetooth software or hardware... seems that the forums are full of this issue with no consistent or official answer. is it all coincidence that so many are having the problem? Please help... I have scoured the net trying everything the last few days.
Please correct your porfile: iPhone 4 do not have IOS 6.1.4.
The usual troubleshooting steps are, also remember to test it after every step:
1. Restart
2. Reset
3. Restore from backup
4. Restore as new.
If no joy, make an Appointment with the Apple genius and have them evaluate
Maybe you are looking for
-
Problem: What is this? Pictures included...
This is the only problem I have noticed with the images on my screen not appearing correctly. It's during the Arabesque screensaver. It should be all black, with like faded colors. But there is black, and then a gray hard line. I took a picture with
-
Report error after upgrading to 2.1
Hello, I upgrade my MBAM integrated with SCCM 2012 setup to 2.1 from 2.0 and now I get an error whenever I run the reports. The error is the same wither I run the report from SSRS or from the SCCM console. Any ideas? Error : the 'MBAM Policy' view
-
Pr CC Mac: third party audio VST plugs issue
The GUIs are garbled and useless on my VST plugs from WaveArts. But, the AU versions work fine. Another bug in Pr CC Mac. Anybody else?
-
HOW TO ENABLE EXTENDED STANDBY MODE
I am unable to locate "Extended Satndby Mode" in Power management. Can anybody Help ? I am attaching a screenshot Solved! Go to Solution.
-
In OS 10.10 Yosemite can we get App Task Bar always
In the new OS when running an apps like Pages or Numbers the Task bar ( File,edit view,etc) is not showing until you mouse up to the top of the screen. Is there an option setting anywhere to make it work the way it did in the older systems so the tas