My UPS tracking # is NOT working!

The status on the VZ page says shipped 10/11, and that I should receive it by the 14th.  But when i click on the tracking number, I get this:
>>> UPS could not locate the shipment details for your request. Please verify your information and try again later.
>>> 
It's been this way all day, and I got that tracking number at 6am today. 

lmwsport, same here.  i just want to be able to track it.  frustrating.  this phone is for a family member (i got the 4 back in February).  last time, I ordered through Apple, and ended up getting it a day and a half later than my friend who ordered through Verizon.  figured it would be different this time.  i guess only time will tell.
on an amusing side note, it was hilarious tracking my iPhone 4 back in February, because it kept bouncing back and forth for 2 days to and from "Chek Lap Kok, China".   

Similar Messages

  • E-commerce Sales Tracking is not working in magento (ver 1.7.0.2)

    Hi,
    e-commerce Sales Tracking is not working in magento for my website - [Link removed], I implemented remarketing tag (dc.js ) with it.
    Please help me find out the problem.
    Thanks
    Vimlesh

    This is Adobe Business Catalyast, this is not the Magento forums and that is not an Adobe product. I suggest you go try over there for help.

  • Motion tracking is not working for videos but works for images?

    Motion tracking is not working for videos but works for images. When the videos is drop onto the tracking object the videos corner don't appear highlighted. I am working on windows 7 with version 13.1.

    ivanhoeeurope
    Are you within 30 days of purchase for the Premiere Elements 13? And, did you purchase as a download from Adobe? If so, you can
    apply for a return/refund for 13. If you purchased elsewhere, then you would be governed by the return/refund policy of the seller.
    Adobe no longer sells version 12, so you would have to find a vendor who still has it in stock and purchase it. There is no way to "downgrade"
    13 to 12.
    What you may want to do is to download and install the Premiere Elements 12 tryout from the following web site to verify that 12 Motion
    Tracking works for you; whereas 13 cannot with regard to use of video for the Motion Tracking source media.
    Adobe Photoshop Elements 12 Direct Download Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
    Apparently this web site does not sell the tryout. It just makes it available for use.
    Before I posted my reply to you I looked at Motion Tracking with video source media on both Premiere Elements 12/12.1 and 13/13.1 on the same Windows 7 64 bit computer.
    If any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

  • Currency Tracker Widget not working

    Hi
    Anyone else have their Apple Currency Tracker Widget not working - when I drop it on my dashboard it shows up but cannot be edited - when I try and click on the i button nothing happens - any ideas??

    Try deleting this pref/plist file in your /Library/Preferences folder:
    widget-com.cocoade.widget.currencytracker.plist

  • Tracking Number not working

    Hi,
    I recently ordered an Y50 laptop. On the order detail page, it says it had been shipped on the 29th, however, the 10-digit reference number does not work on the UPS website (I also tried using the link on that page and in the email that was send to me). I know it says it is expected to be delivered on the 5th, but I find it very strange that I am unable to track the shipment.
    Any ideas?
    Thanks in advance.

    Welcome to the Lenovo Community !
    With both U.S.P.S. and U.P.S. I have experienced problems in the past with their tracking not being updated in a timely manner especially during holiday periods like we just had.   My last U.P.S. shipment I received two weeks ago wasn't updated til the day it was on the truck for delivery.  I wouldn't worry at this point,
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

  • Key board and track pad not working

    Ok, My situation is similar to some of the other things posted but not quite.
    I tried to wake my computer up from sleep the other day and it wouldn't "wake up" so I did a hard shut down and restart. When it restarted the key board and track pad did not work. The caps lock light wouldn't come on or anything. I tried connecting a usb apple keyboard and mouse and those didn't work either.
    When switching to windows in bootcamp, everything works. So... I guess that means it's a software thing.
    I called Apple support and we did all the possible key combinations and restarts possible and it came down to this: I need to archive install tiger again, then install all of the updates, then install leopard back on (I don't have leopard disk because it was a family pack and im at college). My roomate's macbook (White, bought in aug 2008) install disks which are 10.5.2 do not work with my computer.
    My question is: Is this really the correct solution to my problem? Will archiving and installing tiger then leopard affect my files? I haven't backed up using time machine in a month, so is there a way to backup through osx with my keyboard and trackpad not working or can I do a good back up through my windows partition in bootcamp? Any more tips? Thanks, this has never happened before and I guess I'm a little clueless.

    Do you have access to another Mac? If so, possibly you could use Firewire Target Disk Mode to access your drive and do a current Time Machine backup:
    http://support.apple.com/kb/HT1661
    Since you have a family pack of Leopard at home, possibly you could have someone burn a safety copy of it and send it to you so that you can reinstall Leopard. Once you have the OS installed and brought up to date, you could even restore from Time Machine if you had to.
    Since we don't know all the steps you took, it's hard for any of us to say if this is the right solution. Evidently the Apple tech came to the conclusion that your software had become corrupted, and this could well be the case, since everything works on the Windows partition. Hence the suggestion to reinstall the OS.
    I think you need to get a copy of the Leopard disc so that you can bring your OS completely up to date. I'm not sure of the logistics of doing an Archive and Install with both Tiger and Leopard, especially if much of your work has been done on Leopard. I'm not even sure if it's necessary to reinstall Tiger--it might be better to just reinstall Leopard using Archive and Install.
    It's always a good idea to have a good up to date backup like Time Machine before attempting an Archive and Install, because things can go wrong. If they do, you may end up having to do an erase and install. If that happens, you can restore from your Time Machine backup.
    I think what you should do is to get a copy of your Leopard disc, and then boot from it and try to do the Archive and Install. Navigate to Disk Utility first and verify both permissions and the disk and repair if necessary. Then proceed with the Archive and Install. Once you're done, run all the updates. Then go to Disk Utility and repair permissions.
    Good luck!

  • HT1338 track pad not working after upgrade to mountain lion

    I have just finished installing Mountain Lion and it apears to be ok but I have two imediate problems.  Firstly the track pad gestures are not working, I can only select anything with the click switch, single selection by finger is not working.  Secondly I have used the migrate assistant to transfer my files but I appear to have lost all my desktop shortcuts.  I have installed all the upgrades which were advised on start up.  I hope someone can help.

    For the first problem, you need to re-enable 'tap to click' in Sys Prefs:

  • TS1248 Track Pad not working correctly after upgrading to OSX10.8

    I've the same issue since yeterday night after upgrading to OSX10.8 from OSX10.6. The problem I am having is only right side of the track pad is not working.. Did some one already experience this issue ?
    See screen shot
    Cheers,
    Vivek

    In addtion to Altenbach's comments - 
    I'd recommend trying another VI function to get the power spectrum for
    your signal to see if the behavior is the same.  You can find some
    examples of VIs using the power spectrum functions using the NI Example
    Finder.
    You can go to LabVIEW's Example Finder by going to Help >> Find Examples.
    Then search for FFT. There should be some results that include FFT and
    Power Spectrum Units.vi, Power Spectrum Measurement.vi, Basic Spectral Measurements.vi,  and Spectrum Measurements.vi. Try opening and
    running these examples to see if the VIs are returning the proper
    results.
    Mark Walters
    Application Engineer
    National Instruments

  • Repeat Track is not working, is

    hi,
    Can everybody try to play mode "repeat track"? In my zen micro it doesn't work properly..
    When i use that mode it is working like normal mode.. Is this a bug or my firmware does not work properly..
    firmware version: .02.05
    I'm wating for replies zen micro users..

    I just checked it on my own Zen Micro (with the same firmware version), and it seems to work fine. Have you tried reloading the firmware yet?
    Cat

  • New mask tracker is not working

    I am trying to use the new mask tracking feature in Premiere Pro CC 2014 and it does not work.  I am using native AVCHD footage from a Canon C100.  Editing on a mid-2012 Macbook Pro with Retina and OSX 10.9.3.  The project has GPU enabled.
    I drop a Gaussian Blur effect on a track and set a mask to blur someone's face.  So far so good.  However, when I click to track the mask forward, it steps exactly one from forward then stops.  It does not lock the computer, just seems to stall.  The dialogue box is still up showing that it's working but does not show any progress.
    I suspect this is a bug.  Anyone else having issues?

    I did a remote session with Adobe yesterday. I was able to show him the problem with the complex mask around the person that I was using, but we did a simple oval around one persons face and it created all the key frames. He suggested that only simple oval or rectangle masks are supported and that I open a feature request for a more complex mask. I realized I wasn't going to get any further help or research from this person and filed a feature request that PR should track any mask I'm allowed to create. I used around 75 added points to the rectangle mask to cover a person from the waist up who was not very animated. Still seems like a bug and I hope we can get an Adobe employee to test it out and acknowledge that it's a pretty big issue with their new feature and get a fix soon.

  • Track pan not working

    panning right & left not working; i definitely changed setting from volume to pan & properly highlighted & rotated the nob; i also used the help section in garage band header menu & as it suggested, i also turned off the master reverb, master compression, etc...still not working. i also tried rebooting & didn't help any.
    any suggestions or help is much appreciated.
    w.w.w.

    Thank you for taking the time to answer.
    Here is what I expect: When I pan left whatever is in that particular track (1) is heared from the left speaker. Panning to the right you hear track 2 from the right speaker. Pan in middle position centers it between right and left speaker (normal position (track 3). (depending on the pan position, I could have anything in-between).
    I am recording a 3 part composition with me playing 3 different instruments. I would like the 3 parts to be heard as if 3 musicians played them one standing on the left, one in the middle and one on the right in stereo. I am sure this should be possible with Garage Band 09. Right now changing the pan-position only lowers the volume not it's position.
    W.W.

  • Please help- M-audio mic nova and fast track usb not working

    Hi All,
    I just purchased a m-audio nova microphone and the fast track usb interface. I was hoping to use this to record overhead voice. However, it doesn't seem to work. I plugged in a regular microphone in both the mic and guitar input and it seemed to work. Am I missing something? I have set audio-in to fast track in both systems preference and garageband preference. The output remained built-in because my speakers are plugged into my desktop. I also tried output using the fasttrack and plugged my speakers into the fast track's interface and the my old microphone also worked ok. Is it my newly purchased m-audio nova microphone that is not working?
    Thanks.

    Sorry about that, the regular mic is not the m-audio, it has an on/off switch. I am not familiar with audio gear terms, I apologize that. When I plug this mic in, it works in both the guitar input and the mic input on the usb interface (m-audio fast track). I can also plug this mic into a guitar amp. I hope that makes sense. Even when I plug it into my G5, it works, although I use an adaptor for the plug (same size as a headphone jack).

  • My track pad not working properly

    Hi Guys
    I have been reading loads of forums on trackpads not working due to updates but I only have 10.7.5.
    My track pad was working fine all day then when I get home to open computer again it starts playing up randomly selecting folders and wont click.
    I restarted my computer checked for udates now I cant click and drag but the cursor and tapping and two three fingers is fine.  Any suggestions. 
    The pad can click all the way to the bottom and if I want to use soming in the top bar I can click on it but nowhere else
    Please help

    Hello Vikas,
    It certainly can be inconvenient and frustrating when your trackpad is acting erratically.  I recommend reviewing the following article for an issue like this:
    Portables and Magic Trackpad: Jumpy or erratic trackpad operation
    http://support.apple.com/kb/ts1449
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Track pad not working & cannot find server message when searching

    I tried rebooting, the track pad has worked on and off for months and now when I try to search anything on the browser it comes up with a unable to find requested server message

    Hi mugssy10,
    Welcome to the BB Community...
    I too was having some issue with my trackpad...atfirst it was not a permanent issue(at times trackpad was working and at times not), but later the trackpad tollay stopped working...i got it replaced by the BB service center...
    So, i wud suggest u to visit a BB service center and get it clarified...do take backup of ur BB before going to a service center coz they will reinstall ur OS too after replacing the trackpad...
    with regards
    simply abhik...
    Please click "Accept as Solution" if your issue has been solved and to give thanks/appreciation, click thumbs up...
    For BB OS update: http://us.blackberry.com/software/smartphones/update.html
    BB Simulators: http://us.blackberry.com/sites/developers/resources/simulators.html

  • Bamboo Track Pad not working properly

    My Bamboo track pad is not working properly.  Plugged it in into my macbook pro via USB like usual today and for some reason when I try to use it and begin using the pen tool in illustrator my pointer only stays in the top left corner of my screen and wont move with my pen.  This is the first time I have had this problem with my Bamboo track pad.  Not sure why it is doing this.  My MBP recognizes the track pad but for some reason it just won't work properly.  Not sure if I need to reinstall the driver or what?  Any help would be grateful, thanks.

    Ralph, thanks for the quick reply.  All of the Trackpad preference boxes are checked for "Point & Click" except "Three finger drag."  Once "Three finger drag" is checked, this action spawns a simultaneous action in the Trackpad "More Gestures" area that changes the gesture for Mission Control from "three finger swipe up" to "four finger swipe up."
    Since I am having this problem on an early 2009 iMac, I decided to check-out my 2013 MBPr for the same behavior.  Amazingly, all was working well with the built-in trackpad functionality regarding the "double-tap select and drag" until i checked and then un-checked the "Three finger drag" box (in Trackpad preference > point & click).  Now my "double-tap select and drag" is BROKEN on my 2013 MBPR.

Maybe you are looking for