My USB connection wont work for my iphone

i tryed to connect my iphone to mu mac book pro nd the usb wont connecet. i thought it was the cable it self but i tryed it on another computer nd it work. why could it not work on thr mac book pro?

Reset SMC.     http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help try a new usb cable for the iPhone
or contact Apple.

Similar Messages

  • Facebook apps wont work for my iphone 4 please help

    facebook apps wont work for my iphone 4 please help

    Ok, what you have here is a basic 'blown fuse' problem.
    With the iPhone 3G and 3GS if you drop them in water and they stop working you can almost always revive the phone simply by oepning them up, finding the corrosion on the motherboard then cleaning it and putting it back together.
    With the iPhone 4 (and 4S) it's a different story though in that water damage causes a fuse on the motherboard to blow. Once blown, the phones can no longer receive power from the battery. They can however receive power from a wall charger, which is why your phone runs whilst plugged into a charger but dies as soon as it's disconnected. Trying to run it from a USB port wont work either as the 5V power supply gets interupted whilst the phone is booting, as such it dies part way through booting, and the cycle repeats. 
    At this stage you have 3 options:
    -have the phone replaced by Apple, or
    -replace the damaged fuse on the iPhone motherboard yourself, or
    -send the phone to a company to have the fuse repaired
    There is a company that sells the replacement components, and  they have an installation sevice too. I've fixed a couple of iPhones in my day, and unless you are very proficent with a soldering iron I strongly recommend having the repair done for you.
    See the link below:
    http://fonefixer.webs.com/apps/webstore/products/show/2684671
    Sorry it's not good news, but at least you know what's going on with the phone now and can weigh up your options.

  • Usb connection not working for itouch

    I have a 1st generation iTouch and when connecting to my laptop via usb, it does not show in iTunes.  Have worked through the online support steps and they did not remedy the issue.  Even downloaded the lates version of iTunes.

    - Try here:
    iOS: Device not recognized in iTunes for Windows
    - Try another cable
    - Try another computer to help determine if a computer or iPod problem.

  • Usb charger stop working for my iphone

    I have had my Iphone since july and my charger has been working just fine. Last week my charger stopped working and i get a code 43. I have uninstalled apple products and reinstalled and still the same issue. Someone please help.

    One of the drivers may be corrupted. Try unplugging all of your USB devices and restarting your computer.

  • Why is my home wifi connection wont work with my Iphone?

    After I upgrade my Iphone OS 5.0, my Iphone does not connect with my home wifi but works with other wifi. I tried many ways to reset my Iphone and it remain the same.  Hope someone can help me out here.  Thanks! WEC

    did you try to reset the router?
    are other devices connecting to the wifi?

  • I have added an iPhone 4 to my household and the wifi in our home no longer works for my iPhone 4S or the new iPhone 4. Both will connect to the wifi, but we are not able to view anything i.e. google just runs circles, app store just runs loading, gps on

    I have added an iPhone 4 to my household and the wifi in our home no longer works for my iPhone 4S or the new iPhone 4. Both will connect to the wifi, but we are not able to view anything i.e. google just runs circles, app store just runs loading, gps on maps not found just runs? I have check all wifi issues with ATT&T, Verizon network all believe that it is the phones? I am confused as my 4S worked fine before adding the 4 to the mix....any thoughts are hits to what to do

    Have you rebooted your home router?

  • TS2774 hi i have done the settings that mentioned in apple support threads but it wont work for me i am using BSNL cellone SIM and activated 3G too but unfortunately internet is not connecting but my facebook is updated and also showing the data statistic

    hi i have done the settings that mentioned in apple support threads but it wont work for me i am using BSNL cellone SIM and activated 3G too but unfortunately internet is not connecting but my facebook is updated and also showing the data statistics

    They are not a supported carrier. You'll have to take it up with them.

  • When I try to login to icloud I get a message that says my appleid is valid but it wont work for icloud. What do I do?

    when I try to login to icloud I get a message that says my appleid is valid but it wont work for icloud. What do I do?

    Hi ljzimprich!
    To have a better understanding of your issue, please let everyone know which model printer you own and what operating system you are connecting it to. That way, community will be able to assist you with suggestions appropriate for your product.
    Thanks!

  • The backlight wont work on my iphone 3gs?

    the backlight wont work on my iphone 3gs?

    The only backlight issues I've heard of were from the LCD having gone bad.  They're easy to replace, and inexpensive (around 20USD) on eBay including the tools needed to do the job.  Alternativly, you can have it done at apple for ~150USD.

  • After Update USB Devices wont work anymore

    Hello,
    after my first Arch installation on my ASUS UX31 I had 2 problems after makeing updates:
    1. My USB Devices wont work anymore, but I belive they are still recognized because they are displayes via "lsusb -t":
    2-1.1:1.0: No such file or directory
    2-1.2:1.0: No such file or directory
    2-1.4:1.0: No such file or directory
    1-1.5:1.0: No such file or directory
    1-1.5:1.1: No such file or directory
    1-1.7:1.0: No such file or directory
    1-1.8:1.0: No such file or directory
    1-1.8:1.1: No such file or directory
    /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
    /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
    |__ Port 1: Dev 6, If 0, Class=hub, Driver=hub/4p, 480M
    |__ Port 1: Dev 7, If 0, Class=HID, Driver=, 1.5M
    |__ Port 2: Dev 8, If 0, Class=HID, Driver=, 1.5M
    |__ Port 4: Dev 9, If 0, Class=vend., Driver=, 480M
    /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/2p, 480M
    |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/8p, 480M
    |__ Port 5: Dev 3, If 0, Class='bInterfaceClass 0x0e not yet handled', Driver=, 480M
    |__ Port 5: Dev 3, If 1, Class='bInterfaceClass 0x0e not yet handled', Driver=, 480M
    |__ Port 7: Dev 4, If 0, Class=vend., Driver=, 480M
    |__ Port 8: Dev 5, If 0, Class='bInterfaceClass 0xe0 not yet handled', Driver=, 12M
    |__ Port 8: Dev 5, If 1, Class='bInterfaceClass 0xe0 not yet handled', Driver=, 12M
    I need these Devices because they are my only network access via the Asix USB to Ethernet Adapter.
    After the installation I have compiled and used the drives for the Asis adapter.
    The both other devices are my USB Keyboard and Mouse.
    2. My other problem is, that after the update my resulution of my console is very weak, this is just bad but not a real problem, I can live with that.
    Thanks in advance for helping me

    on plugin
    May 4 21:07:06 localhost kernel: [ 49.202535] usb 2-1.2: new high speed USB device number 10 using ehci_hcd
    May 4 21:07:06 localhost kernel: [ 49.287984] hub 2-1.2:1.0: USB hub found
    May 4 21:07:06 localhost kernel: [ 49.288333] hub 2-1.2:1.0: 4 ports detected
    May 4 21:07:06 localhost kernel: [ 49.555951] usb 2-1.2.1: new low speed USB device number 11 using ehci_hcd
    May 4 21:07:07 localhost kernel: [ 49.712506] usb 2-1.2.2: new low speed USB device number 12 using ehci_hcd
    May 4 21:07:07 localhost kernel: [ 49.865853] usb 2-1.2.4: new high speed USB device number 13 using ehci_hcd
    unplug:
    May 4 21:06:57 localhost kernel: [ 40.059117] usb 2-1.2: USB disconnect, device number 3
    May 4 21:06:57 localhost kernel: [ 40.059128] usb 2-1.2.1: USB disconnect, device number 7
    May 4 21:06:57 localhost kernel: [ 40.059269] usb 2-1.2.2: USB disconnect, device number 8
    May 4 21:06:57 localhost kernel: [ 40.059342] usb 2-1.2.4: USB disconnect, device number 9
    I rebooted several times of course and it was no kernel update.

  • My apple id is not working for my iPhone activation. Please help me.

    my apple id is not working for my iPhone activation. Please help me.
    i'll just restore it.

    Not working in what way?
    Only the Apple ID that was used to enable "Find My iPhone" on the device can be used to bypass Activation Lock.

  • My ipad 1 for no apparent reason no longnet. Our home wireless connection is working for all other devices. Any clues?

    My Ipad 1, for no apparent reason, no longer connects to the Internet. Our home wireless connection is working for all other devices.Any clues?

    You can also try to reset your network settings on the iPad.  Go to Setings>General>Reset>Reset Network Settings.
    Good Luck!

  • My facebook app no longer works for my iphone after i sync it to my laptop!

    Why does my facebook app no longer works for my iphone after i sync it to my mac book pro?
    I added this app for facebook and then i synced it up with my mac book pro, but afterwards it lost the app, and I can't download it anymore... why is that?
    And how do I manage to put it back on my iphone?

    Hello hersheygirle,
    Welcome to the Discussions Boards.
    Re-download the Facebook APP on your computer and then sync it to the iPhone.
    Make sure your computer is logged into the same iTunes ID that shows up on your iPhone when you try to download an APP on the iPhone.
    http://support.apple.com/kb/HT2519
    Hope that helps,
    Charles H.

  • My homepage button is not working for my iphone 4 after installing ios 5

    my homepage button is not working for my iphone 4 after installing ios 5 has anyone got any suggestions please

    Hope it works.
    When i was in iOS 4 nothing happen quite like this.
    BTW, does it do anything with iCloud thing?
    Thank you.

  • I installed itunes 11.1.3 and now my itunes store wont work - for example the movie list comes up blank

    i installed itunes 11.1.3 and now my itunes store wont work - for example the movie list comes up blank- does anyone knw how to fix this?

    Looks like blame is incorrectly placed. Turns out my iSCSI connector is struggling with Mavericks. When I placed the iTunes library on a local drive, everything came back to normal.

Maybe you are looking for

  • Opening Adobe Reader PDF

    Four months ago I wrote that when I tried to open Adobe Reader PDF for any reason, Photoshop Elements 4 took over and Adobe Reader was opened in PE4. I was given advice toopen and check in a word document my file association and to "tell" the system

  • Query in PLD

    Hi There, Is it possible to have a query in the PLD to state that If the Item is a Stock Item then the description should NOT be displayed, if the Item is not a stock Item then the description should be displayed in the Production Order Layout. Regar

  • How to use SQL query result in DOS commands

    Hi Currently i am runnig below DOS commands manually d:\apps\bin>TrueGridsCalc period="Aug 2010" Now I want to write one batch file and schedule job on windows and make value of "period" to be dynamic. So to get that value i need to fetch it from DB

  • Unproper ADF BC behaviour after database exception

    Hi, A have a problem with ADF session. I use ADF Business Components in my application and generally it works good. Unfortunatelly I experience problem when I face database exception (i.e. packages I use are not compiled). I catch such an exception i

  • How to connect input string value to numerical values

    Hello, I am trying to figure out how to connect a single user's input string value to numerical values. Basically I want the user to input the name of a gas that I have a list for (I believe i put the list of gasses in an array>). Then I want to matc