My USB drive is not working,

I plug in my Iphone to charge or connect a flash drive into the USB slot but the computer does not acknowledge that it is there.

I have same problem but didn't find solution… If I put USB drive no files shown on finder… But If I use ForkLift files are showing but only in Forklift…
Need some clue how to fix it...

Similar Messages

Usb drives are not working, usb drives are not working

USB drives are not working. Please help

Non of my Western Digital drives are working anymore on several different Mac computers, one Mac can still work with the drive so I am not getting it up dated to the new OS.
If they told me that all my 2 TB drives would no longer work if I got the new OS I would not have updated.
There needs to be a fix, I can't afford all new drives plus they have video on them that I need to use.
Also iPhoto and Garage Band have disapeared I can't find any trace of them???

After installing OS X Yosemite my USB drive is not working as it was. It does not show any files in USB drive.

After I installed the latest OS X Yosemite my USB drive is not loading any files or folders which is located in it. Sometime it just show a blank window and sometime it shows folders and files but not clickable.

I have same problem but didn't find solution… If I put USB drive no files shown on finder… But If I use ForkLift files are showing but only in Forklift…
Need some clue how to fix it...

Hp split 13X2 pc usb drives do not work

I have an hp split which is about 6 months old. The usb drives have stopped working first one and then the other. I now cannot use my usb mouse or plug in my iphone....help!

Hi
Find the link given below might help you to fix your issue.
Link
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

USB Drive does not work when connected to Airport Extreme

I had an external drive connect directly to my iMac and recently purchased an Airport Extreme. When I plugged it into the USB point on the back of the AX has an odd name and won't allow access. When it was configured directly to my iMac it was named TheVault, now it is TheVault???. When I try to access via Go>Network in finder menu, I get "The operation cannot be completed because the original item for "TheVault??? cannot be found." Another detail if found in the GetInfo it that it shows 0kb available. All things point to it's existence as a drive but it has no access to the data that was clearly there when it was plugged into the back of the desktop. Jack sends.

TheWack wrote:
I had an external drive connect directly to my iMac and recently purchased an Airport Extreme. When I plugged it into the USB point on the back of the AX has an odd name and won't allow access.
Did you use AirPort Utility to enable disk sharing?

Connected usb driver is not detected in window 8.1

hey .....
HP 250 G3 notebook
connected usb driver is not detected in window 8.1 after update BIOS software ....my current BIOS software version F.22 .... so plsss...fix this problem......

@jeet2113
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

External USB HD does not work with HAL:

External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.

I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

USB ports does not work

Hi I have problems with not working USB ports. It used to work. I downloaded actual drivers at msi.com for my gaming notebook GX 60 Destroyer and now my USB ports does not work. What should I do?

What driver have you updated?
Try to do an EC firmware reset by removing the battery and the AC adapter then put the battery back with AC adapter attached.
Same questions like Pegasus asked, does all ports not working? which one exactly? What OS are you using?
Have you done any changes to the system? (for example: self-install OS or changing OS)

TS1538 What do I do after step 6 in "If the Apple Mobile Device USB Driver is not listed"?

i'm very confused about step 5, "Verify that the Apple Mobile Device USB Driver is installed" > "If the Apple Mobile Device USB Driver is not listed", what do I do after step 6? I looked for and found the entry that recognizes the device as a camera, "Apple iPhone, now what? I'm trying to resolve an issue. After an iTunes upgrade in July 2012, I have not been able to get my iTunes to recognize any of my devices. I have uninstalled/reinstalled iTunes, all the steps. Now I'm on this one and I don't know what to do after this step 6. I looked and found the entry.... now what??? I am out of room on my phone because everything I buy on iTunes on the computer mysteriously appears on my iPhone 4, and everything I buy on my iPhone mysteriously uploads onto my iTunes the next time I open it. My phone will charge when connected to the computer, and Windows recognizes it and asks how I want to open pictures, etc. But in iTunes it will not show up under Devices. This is getting beyond ridiculous and I have to get some of this music off of my phone!

Found a possible solution for me.
While the phone was plugged into my computer and iTunes is CLOSED.
1. I went to Services in Windows.
2. I selected Apple Mobile Device and right clicked and selected "Stop".
3. Then I right-clicked again and selected "Start".
4. Then I went to Device Manager and right clicked my iPhone with the yellow alert icon and selected "Uninstall". You will get a warning about uninstalling the device. Click OK.
5. At the top of Device Manager I clicked the Action menu and selected "Scan for Hardware Changes".
This re-installed the iPhone and everything started working again.

Hp pavilion g6-2305tx left side usb 3.0 not working after installing windows 7 home premium

Hi ,
The left usb ports are not working on my pavillion g6 2305tx after a fresh win 7 installation. Already installed chipset drivers, but this doesnt solve the problem.
Please check the screenshot below.
Kindly help.
Thanks

Hi,
Please try installing window 7 USB 3.0 driver for the following issue
For Win 7 64 bit
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?
cc=us&lc=en&dlc=en&softwareitem=ob-102571-1
For Win 7 32 bit
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescript
ion.jsp?
cc=us&prodSeriesId=5260575&prodNameId=5260578&taskId=135&swItem=w
k-106309-1
Regards,
Sumit
I am an HP Employee.
The opinions expressed here are my personal opinions, not of HP.
Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.
Click on Kudos if my post helped you.

External hard drive is not working on airport time capsule even after 7.7.2 firmware update.

External hard drive is not working on airport time capsule even after 7.7.2 firmware update.
I have the latest Airpor Time capsule 2gb. I specifically bought it so that I could have an external hardrive set up to wirelessly house my itunes library and movies. When i connect the drive, all i get is that the disk needs to be repaired.
the drive can works fine when connected to the macbook pro and I have run the verify and repair features in disk utility. I have also reset the airport timecapsule as well following these changes and still no change.
The 7.7.2 update says that it addressed the usb issue of not showing the drives but there are still problems as I cannot get it to appear.
Please help.
Thanks

How is the hard drive formatted?
Have you tried using a powered USB hub with the drive when it is connected to the Time Capsule?
(The USB port on the Time Capsule is borderline as far as power is concerned....you may need to use a powered hub.....even if the hard drive has its own power supply)
If the drive is formatted correctly....and....it has ample power, it will "show up" when you open AirPort Utility, click Edit, then click the Disks tab at the top of the next window.
In the example below, my Time Capsule drive is named "Backups" and another drive named "WD Drive" is connected to the USB port on the Time Capsule.
You should see the name of your Time Capsule drive (named "Data" unless you have changed the name) and the name of the USB drive if you perform the same check.
What do you see?

Satellite P25-S520 - DVD drive is not working properly

Fix DVD Drive or buy external drive
My DVD drive is not working properly, in fact it may never have been working proper. Recently I tried to back up my PC to a DVD using Norton 360. Norton did not recognize the DVD was present. I then tried writing a text file to a DVD and was unsuccessful. Both DVD+R and DVD-R media were tried (Maxwell 16X).
I could have probably lived with this however, I got a copy of Dragon NaturallySpeaking version 10 on a CD and my Toshiba would not recognize it. I tried the CD in my neighbors laptop and it was recognized.
An attempt at updating the driver was also unsuccessful.
I was able to rip a music CD last night so that at least is working correctly.
Does anybody know how I can fix this? The important part is being able to load my new program.
Searching some forums I've found that other people have had problems with the Pioneer drive. If the drive cannot be fixed I am not adverse to buying an external DVD drive. Unfortunately where I live there are no brick-and-mortar stores which sell external drives and I would prefer to avoid the hassle of getting a drive online and discovering that it does not work with my Toshiba. Can anyone suggest an external USB drive which will read and write CDs and DVDs and which is certain to be compatible with my Toshiba?
Thank you for any help,
Humbaba3000BC
Satellite P25-S520
PIONEER DVD-RW DVR-K12D
Driver Provider: Microsoft
Driver Date: 7/1/2001
Driver Version: 5.1.2535.0
Digital Signer: Microsoft Windows Publisher

Any external USB CD/DVD drive will be compatible with your laptop.
However you wont be able to boot of CD's (Run Recovery for example) if you use an external drive.
So your best option would be to replace the internal drive with a Toshiba drive designed for the laptop. Call an ASP and ask for a quotation.

Curve 9220 BlackBerry App World registration error MTP USB Driver is not installed

Hi,
Recently I have purchased Curve 9220, trying connect to BlackBerry App World setup in the first instance I get
1. Get the BlackBerry App World Browser Plug-in (I get tick mark) then when I get
2. Connect your smartphone I get the drop down of my pin no I select my PIN no here I get a error message (An error has occurred communicating with the BlackBerry App World Web plugin. Please restart your device and try again. If you have content protection enabled on your device, please disable and try again.)
I have tried rebooting my device no of times it does not work.
I have removed all USB driveres thats was there in PC rebooted the system it is still not working.
I have even tried in another PC having win7 it gives error message MTP USB Driver is not installed.
For information Content protection is not eabled the encription is not ON in my hand set
Another problem whenever I connect my deice to USB every time it takes up the driver asks me to reboot the sytem (I have even tried the same 4-5 times) still not wokring.
The hand set is communicating with the BlackBerry desk top software (I have downloaded the latest one and using the same).
I need to install few apps which was there in my earlier BB so please help.
Best regards,
Shaibal Ghosh

Hello shaibalghosh,
Welcome to the Community,
As you having difficulty in connecting to apps. world , On your Homescreen Go to Options > Security > and check
encryption is disable For your device and Media card and also Check Firewall it may prevent connecting Apps
World.
Please have a look at this article of KB Apps world web plug-in error appear when attempting to install applications from a computer
Try installing OTA .
Good Luck
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

After updating to iTunes 12 the Apple Mobile Device USB Driver is not listed, I use Windows 8.1, how can i solve this?

After I updates ITunes to the latest version (12), ITunes wont find my iphone and Ipad anymore, after searching I found that the Apple Mobile Device USB Driver is not listed anymore, on the support website of Apple it doesnt explain how to solve this,.
I use Windows 8.1 and so now also ITunes 12, both my Iphone 4S and Ipad Air have the latest IOS version.
I hope anybody can tell me how to solve this that the Apple Mobile Device USB Driver is back, thank you

Found a possible solution for me.
While the phone was plugged into my computer and iTunes is CLOSED.
1. I went to Services in Windows.
2. I selected Apple Mobile Device and right clicked and selected "Stop".
3. Then I right-clicked again and selected "Start".
4. Then I went to Device Manager and right clicked my iPhone with the yellow alert icon and selected "Uninstall". You will get a warning about uninstalling the device. Click OK.
5. At the top of Device Manager I clicked the Action menu and selected "Scan for Hardware Changes".
This re-installed the iPhone and everything started working again.

T420 USB Ports do not work after installing XP

Hello my office has been using Lenovo's for some time now but we recently purchased a T420 and installed Windows XP SP3 on it. The issue we are having is that the uSB ports do not work. I have tried every driver I can find but still no luck, can anyone help?

hey chris0277,
could you check in Device Manager and see if there is any ? or ! symbol on the USB area.
If there is, i do recommend uninstalling the drivers from it and then visit http://support.lenovo.com and update your unit
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

My USB drive is not working,

Similar Messages

Maybe you are looking for