My USB drives have "Disk Repair" issues, with "limited functionality."

The only way I can transfer files between my PowerMac G4 with OS X v10.5.2 and my PowerMac 5500/225 with OS 8.6 is with Iomega Zip drives. My 100 MB disks work perfectly in OS 8.6 but they seem to get corrupted when I open them on the G4. I've had this problem with other USB drives on the G4, including an external USB hard drive and my USB SD card reader. Things will seem to work fine transferring files but then I'll get the following message:
*+Disk Repair+*
+The disk "disk" was not repairable by this computer. It is being made available to you with limited functionality. You must back up your data and reformat the disk as soon as possible.+
Then I drag the files over with the Zip drive until everything blows up and I have to reformat the disk. I'm scared what might happen with the SD cards, if that will have any effect on the camera or if the disk will stop working entirely. The external hard drive was the first to blow up but we didn't know that this was going to be a trend so we had returned that to Best Buy. It had worked beautifully under OS X v.10.3.
Does anyone have any ideas on what is going on here and how to fix it? I do not have vast sums to upgrade hardware and software nor do I even really want to. I'm quite fond of the old Power Mac 5500 and OS 8.6.
Any suggestions are greatly appreciated!

Have you tried backing up again by manually running a Time Machine backup? Unfortunately, if your backup is corrupted I don't know of a way to fix it except to start over.

Similar Messages

  • TS1398 I have the ipad retina display version - I have a BIG issue with this when out and about that on about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!

    I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
    The HTC hotspot works fine with everything else I connect to it.
    Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
    I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!

    I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
    I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr...........

  • I just got the iPhone 5s, I have had a 4 for the last few years, my husband uses a galaxy.  I have never had issues with any of our phones connecting the the cars Bluetooth until this one sometimes it will connect and sometimes it won't.  I drive a gm car

    I just got the iPhone 5s, I have had a 4 for the last few years, my husband uses a galaxy.  I have never had issues with any of our phones connecting to the cars Bluetooth until this one sometimes it will connect and sometimes it won't.  I drive a gm car.  A friend of mine drives an Acura and said she is also having the same problem?  I have to connect the phone every time I get in the car. 

    Turn Off BT on your Phone & ReBoot..
    Delete the phone from the vehicles memory..
    Restart the Vehicle & go thro' the Pair set up..........

  • I am experiencing some major problems with my MacBook Pro. I have had some issues with it turning on/off at random times, but today, when starting, I get the grey start-up screen and a recovery bar. After filling in approx 1/4 of the way, the machine dies

    I am experiencing some major problems with my MacBook Pro. I have had some issues with it turning on/off at random times, but today, when starting, I get the grey start-up screen and a recovery bar. After filling in approx 1/4 of the way, the machine dies. After starting it in recovery mode, it will not allow me to download OS X Mavericks- it says the disk is locked. Any ideas? I do not have a back-up and do not want to erase everything before I have explored my options. Help?

    try forcing internet recover, hold 3 keys - command, option, r - you should see a spinning globe
    most people will tell you to do both pram and smc resets (google) and if you still have issues, either clean install (easy) or troubleshoot (hard)

  • I have found an issue with MS13-098 which causes systems to be renamed to MINWINPC

    I have found an issue with MS13-098 which causes systems to be renamed to  MINWINPC.  The issue has been reported in Japanese by Microsoft. The translation is:
    Phenomenon
      In Windows Server 2008 or Windows Vista, you might not be able to log an error appears to apply the new update the following programs, if you try to log on after the restart. •  MS12-024 (KB2653956)
    •  MS13-098 (KB2893294)
     Error message displayed is as follows.
     Incorrect password or user name
      Back to the top | feedback
    Collapse image  Cause
      This behavior occurs when you apply the update KB2653956 in the state of some data is damaged following registry key, or does not exist.
     HKEY_LOCAL_MACHINE \ SCHEMA \ wcm :/ / Microsoft-Windows-CoreOS? ...
     Any string will contain the part of the ... Note:.  Also, make sure to load the SystemRoot% \ system32 \ SMI \ Store \ Machine \ SCHEMA.DAT file% if the HKEY_LOCAL_MACHINE \ SCHEMA does not exist.
     When you apply the update of KB2653956 in the state where the registry key is not present, the value of the following registry is changed to MINWINPC, logon will not be able to.
    •  HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ActiveComputerName
    •  HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ComputerName
      Back to the top | feedback
    Collapse image  Solution
      If this occurs, change to the correct computer name the value of the ComputerName registry and ActiveComputerName start in safe mode, has been mentioned above, and then restart.
      Back to the top | feedback
    Collapse image  Workaround
      To prevent this phenomenon occurs, you download and run the System Update Readiness Tool from the following KB.
     http://support.microsoft.com/kb/947821
     By performing the system update Preparation tool registry that is described in Section Symptoms are repaired.
     If the repair is made, starting with log Recreated missing key as the following WinDir% \ Logs \ CBS \ CheckSUR.log file% is recorded.
     Recreated missing key:? Wcm :/ / Microsoft-Windows-CoreOS ... \ metadata \ elements \ ComputerName
     In addition, regardless of the presence or absence of entry damaged Microsoft-Windows-CoreOS, you can set the value of the ComputerName key in this tool.  For this reason, the following log is recorded in the CheckSUR.log.
     Recreated value: @ _type.
     Recreated value: @ dataOnly.
     Recreated value: @ default.
     Recreated value: @ description.
     Recreated value: @ displayName.
     Recreated value: @ handler.
     Recreated value: @ legacyName.
     Recreated value: @ legacyType.
     Recreated value: @ migrate.
     Recreated value: @ scope.
     Recreated value: @ xsd: type.
      Back to the top | feedback
     Note: This is a "FAST PUBLISH" article created directly from within the Microsoft support organization.  It contains information in response to emerging issues are listed.  As a result of the speed of information provided may be
    typographical errors are included in the article, you might be revised at any time without prior notice.  For other considerations, and use conditions
     Please refer to.
      Back to the top | feedback
    Collapse image  Property
      December 11, 2013 - Revision: - Last Review: 2901584: 4.0 Document Number
      This document that was written about products for.
    •  Windows Vista Business
    •  Windows Vista Business 64-bit edition
    •  Windows Vista Enterprise
    •  Windows Vista Enterprise 64-bit edition
    •  Windows Vista Home Basic
    •  Windows Vista Home Basic 64-bit edition
    •  Windows Vista Home Premium
    •  Windows Vista Home Premium 64-bit edition
    •  Windows Vista Starter
    •  Windows Vista Ultimate
    •  Windows Vista Ultimate 64-bit edition
    •  Windows Server 2008 Datacenter
    •  Windows Server 2008 Datacenter without Hyper-V
    •  Windows Server 2008 Enterprise
    •  Windows Server 2008 Enterprise without Hyper-V
    •  Windows Server 2008 for Itanium-Based Systems
    •  Windows Server 2008 Foundation
    •  Windows Server 2008 Standard
    •  Windows Server 2008 Standard without Hyper-V
    •  Windows Web Server 2008
    •  Windows HPC Server 2008
    •  Windows Essential Business Server 2008
    We are having the issue on hundreds of systems and I am rolling out the readiness tool mentioned above to prevent other systems from being affected.  In the mean time I have stopped deploying MS13-098 and am hoping Microsoft will go ahead and let all
    of their customers know about the problem instead of just one country.  Hopefully the original bulletin will be updated with this known issue.

    PPoj,
    Apple has offered replacement or pro-rated refunds in the US as a settlement of a class action lawsuit, not because of pride in their design-centric approach to their products. If you seek a similar replacement/refund program in India, then the odds are pretty good that you’d need a similar legal approach with which to convince Apple to offer a similar program there. If you’re unwilling to wait for such an event, then you can purchase a replacement power cable now, and hope for a pro-rated refund at some point in the future.

  • I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case som

    I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?

    Wifi:  my Cell phone will remember 10 wifi connections.  So delete any you don't use often and your home wifi and try to enter home wifi again.
    if it still won't connect to home wifi, call your internet provider for help.  You may need a newer router or different settings Or upgraded service.   Your phone seeks the best connection and will refuse lesser connections.
    last resort.  Backup the phone.  Do a full reset, then restore as new with the backup.
    if still not fixed, go back to apple and insist on repair or replacement.
    HOWEVER.   voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect.

  • I have an hardware issue with my iphone 5 64gb. its lock button in not working. for a fact i know that it can be replaced but my question is this that do they require the bill or anything to replace or they only require the phone in usa

    i have an hardware issue with my iphone 5 64gb. its lock button in not working. for a fact i know that it can be replaced but my question is this that do they require the bill or anything to replace or they only require the phone in usa

    Warranty and support is only valid in the country of origin.  The only exception being the EU where a device bought in any EU country can get warranty or service in any EU country.
    Warranty is determined by device (serial number), no documentation required.
    Apple does not repair devices, they replace them.  For that reason, ensure the device is backed up and any pictures take with the device are copied off the device prior to going in for service.

  • As described in the header, my Apple TV (120GB) has its LED blinking amber non-stop, no video, no audio. It is about 2 months old and I have never had issue with it before.

    As described in the header, my Apple TV (40GB) has its LED blinking amber non-stop, no video, no audio. It is about 2 months old and I have never had issue with it before.

    They stopped making that model four years ago.  There is no way it is two months old.  Trying connecting it to a computer with iTuens via a USB cable to see if you can re-install the firmware.

  • Since downloading OS X Yosemite I have been having issues with Netflix. Video slows down which causes the audio to go out of sync. Netflix plays ok on ipad which makes me think it's the software which is the issue. Has anyone else had this issue?

    Since downloading OS X Yosemite I have been having issues with Netflix. Video slows down which causes the audio to go out of sync. Netflix plays ok on ipad which makes me think it's the software which is the issue. Has anyone else had this issue?

    Try this:
    Go to System Preferences - Bluetooth. Delete the keyboard from the list of devices by pressing the "-" button. Take the batteries out of the keyboard and reinsert them. In Bluetooth Preferences press the '+" button to add the new device. If the keyboard begins to pair, click the word "pair" and type in the passcode. Press return. The keyboard is now paired.
    If the mouse is not pairing, try this: shut down the computer completely, unplug any USB mice, then turn off the power to the bluetooth mouse.  ONce the computer starts up again, wait for the pop-up looking for a mouse.  Turn on the power to the bluetooth mouse.  It should work normally now.

  • Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2.

    Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2. Seller is willing to replace it with ipad2 as well..
    Have also heard that the ipad3 revamped version is around along with the mini pad rumor..too much information - lot's of confusion pls help

    Lindsay,
    Your iBookG4 is still a pretty awesome Mac. Like already said, it has the power to run Leopard, but it depends if you have an internal DVD drive.
    Then I suppose you have to add up the cost of the OS, perhaps another 512MB RAM, iLife 08 and replacements for any favourite apps that you currently use (Leopard breaks a lot of stuff, but Intel breaks even more). Compare it to the cost of a new MacBook, which wil have all of that included and be 3-4x faster too.
    It also depends on what you want to achieve with your iBook. My PMG4 still cuts it today, I still use it in preference to my new Mac Pro, It's about the same age as your iBook, and I'll only stop using it when it becomes "painfully" slow. My 1 year old son currently uses the Mac Pro (parts for a Mac Pro are easier to replace than those for a PMG4).
    I think your choice is simple, if you can a cheap copy of Tiger, use that, it'll get your iPod Touch up and running. It came in DVD and 4 CD version (by request).
    Leopard will work for you too but a lot of the best eye-candy requires quite a meaty graphics card and you may need a RAM upgrade and replacement software - OS9 Classic is not supported in Leopard.

  • I have noticed an issue with utilizing the "stream" function on iOS 7. If you choose to just stream the movie by hitting the play button it seems to actually start downloading (which is fine) but if you are say halfway thru the movie and stop you can clea

    I have noticed an issue with utilizing the “stream” function on iOS 7. If you choose to just stream the movie by hitting the play button it seems to actually start downloading (which is fine) but if you are say halfway thru the movie and stop you can clearly see that storage has been reduced under the usage, yet under the “videos” tab it still states “No Data” the only way to delete what you have partially downloaded is to fully download the video, which is fine but there is no way to tell what videos have been partially downloaded (I.e which occurs a lot when your child switches between movies using the so called “stream” function). This becomes troublesome once the capacity of the ipad is almost met and you have no way to delete this data since you may have several videos that have started to be viewed (hence partially downloaded). Apple needs to somehow make it truly streaming or provide an update so the storage can be managed. The only way I have been able to remove partially downloaded videos is by doing a total software restore. (The video data that is in question when connected to my MacBook shows up in iTunes as “other”) if you have any insight into this issue it would be greatly appreciated. Thanks.

    Here are the screenshots for what it's worth.
    Not sure why I can't post them in the original post.<br>
    <sub><b>Mod edit: See [https://bugzilla.mozilla.org/show_bug.cgi?id=718813 bug 718813]</b></sub>
    '''Again, when I set my DNS server to automatically detect the servers both problems disappear and I have no issues at all.'''
    IMO opendns is either doing this on purpose (unlikely) or they're under some sort of attack/being used to attack the specific torrent sites although I'm open to other explanations. I believe using the automatic setting for DNS is using my own ISP's DNS servers (which again, work fine... but still...)
    I'd rather not use Google's public DNS servers as Google is to commercial these days and I think there's potential privacy issues.
    '''Again I have changed the setting for DNS servers back and forth several times to duplicate/verify the issue(s)... and the issues only happen with the opendns servers.'''

  • Hi, i have an imac which i bought second hand but but the itunes store wont load up nor will me songs ect sync with the itunes on this comp? i have had no issues with this on previous laptops.... any more of this and i may move to samsung! please help!

    hi, i have an imac which i bought second hand but but the itunes store wont load up nor will me songs ect sync with the itunes on this comp? i have had no issues with this on previous laptops.... any more of this and i may move to samsung! please help!

    kaylsk1 wrote:
    udated and its on 10.6.8 yet still no change
    Your signature in 1st post was 10.8.2.
    You went backwards?
    Did you reformat and reinstall when you first purchased it?
    If not I HIGHLY recommend you do that before you do anything else.

  • I have a mac book air. Have had no issues with any virus before but today my safari page keeps directing me to a page which says " cyber crime" posing to be by Cheshire Police AUthority uk metropolitan police.Tells me that I have 24 hours

    I have a mac book air. Have had no issues with any virus before but today my safari page keeps directing me to a page which says " cyber crime" posing to be by Cheshire Police AUthority uk metropolitan police.Tells me that I have 24 hours to pay a 100 pounds.Using my ipad I looked it up and it appears to be a very common virus.I am worried about my Mac(relieved at the same time that I am not a cyber criminal
    !) so anyway what should I do.I tried to fonce quit and then open safari but only that page keeps opening up.Looking up online their was a suggestion to reset safari, but I am unable to click on the reset safari tab as the pop up for stay on page keeps coming up.i have switched off my lap top now.But am really worried.How can I get rid of it?

    It's not a virus. It's a JavaScript scam that only affects your web browser, and only temporarily.
    Some of those scam pages can be dismissed very easily. Press command-W to close the tab or window. A huge box will pop up. Press the return key and both the box and the page will close. If that doesn't happen, continue.
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Security
    and uncheck the box marked Enable JavaScript. Leave the preferences dialog open.
    Close the malicious window or tab.
    Re-enable JavaScript and close the preferences dialog.
    If the Preferences menu item is grayed out, quit Safari. Force quit if necessary. Relaunch it by holding down the shift key and clicking its icon in the Dock. From the menu bar, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    to get rid of any cookies or other data left by the server. Open your Downloads folder and delete anything you don't recognize.

  • HT1948 Can I install OS X on a usb drive connected to an imac with a dead internal hard drive?

    Can I install OS X on a usb drive connected to an imac with a dead internal hard drive?

    Yes.
    (72108)

  • I have been having issues with my computer lagging after installing lion.

    I have been having issues with my computer lagging after installing lion. Can anyone please help me get the issue resolved? I need it in easy to follow language.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Maybe you are looking for

  • How can i determine which devices are used at the moment?

    Hi all, I am designing an interface with LabVIEW for uing agilent devices. My work colleagues will use this interface.  I want to determine which devices are used at the moment and if I determine used device, i will add automatically device names to

  • A serious problem with JTable to update with new data.

    I am customizing a JTable. In the table 3 rows and row wise same data presents. After every 30 sec table will be update with new data. But a exception is coming like: ArrayIndexOutofBound 4>=0. Exception is not coming so frequently some time it comes

  • Why GN_INVOICE_CREATE has no performance improvement even in HANA landscape?

    Hi All, We have a pricing update program which is used to update the price for a Material Customer combination(CMC).This update is done using the FM 'GN_INVOICE_CREATE'. The logic is designed to loop on customers, wherein this FM will be called passi

  • Nftables (-in place of Iptables)

    Nftables, is a kernel implementation like iptables designed to improve its predecessors short-comings to provide a more flexible usage. There have been questions in here and here. The kernel update of 3.13 is up and there is this article. nftables pr

  • How can I uninstall Skype for modern UI from windo...

    Hi, I am running the tech preview of windows 10.  I exclusively use desktop mode and have Skype for Windows desktop installed.   I have never installed Skype for Modern UI.   However when I receive an incoming call I get two call answer dialogs, one