My usb port doent work after I plug in my xbox rock candy controller

Hello
So recently I've gotten the blue screen of death on my computer for some reason on this horide laptop and then it shuts down. Afterwards when I turn on the computer the usb port were responsive for a short while before they stop working. The sound, the mouse, the usb my phone and , and the xbox controller.
So I restarted and rebooted the computer to its orginal factory setting. Now everything works except when I plug in the xbox controller. When I plug the xbox controller to the other usb that works for the devices like the mouse, they stop working and when I repluged the the mouse, the usb stop working.
Laptop is a satellite C855D-S5209 (PSC7SU-007002)
Any help please. Thanks

Any idea what Format the drive is?
Did it ever work here?
Does it work on any other computer?

Similar Messages

Cannot get USB port to work after re-installing of SP2 on Satellite Pro L20

After re-installing XP Home SP2 and downloading all the updates & Drivers from here I cannot get my USB port to work properly, if I have more than one peripheral plugged in it says "Bandwidth Exceeded".
I have a Behringer BCD2000 which is a souncard/midi controler for DJ mixing, it worked fine before i reinstalled windows, now it clicks and pops when playing tunes, also the ASIO doesn't work when I run Traktor (Dj software) and the program freezes. Any other external sound card wont work either. I've been all through the device manager no conflicts apart from an ! over Serial under hidden devices.
I'm lost, is my only option buying a PCMCIA sound card, it worked fine before so surely there is a software solution to this?
If anyone can help I'd be most appreciative.

Hello
Try to disable USB Error Detection:
1. Right-click My Computer and then click Properties.
2. Select Device Manager to view the Device Manager
3. Locate and click the Universal Serial Bus Controller entry.
4. Double-click Universal Host Controller and then click the Advanced tab of the Universal Host Controller Properties.
5. Put a checkmark in the box for Disable USB Error Detection. Click OK.
6. Restart the computer to see if "Bandwidth Exceeded" message occurs again
Did you use recovery media to reinstall WXP? When someone write it worked before and now not it is really not easy to say why this happen. Try to configure notebook as before and maybe it will work again. Behringer BCD2000 is not known to me and I dont know how it works and which software must be preinstalled there.
Can you use different USB devices like external HDD, USB mouse, USB memory stick or printer?

1 of 2 USB ports stopped working after 10.7.2 upgrade

I have the newest Macbook Pro. I upgraded to 10.7.2 today and immediately after, 1 of my 2 usb ports stopped working.   Thought it may be the cable, so I switched cables. Tried plugging in my iPhone, my portable drive and nothing.   Both work on the other port though.   Both ports worked fine before the update.
I've rebooted 4x.
Suggestions?

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best.

USB ports not working after OSX 10.9.1 update

I have a late 2011 MBA 13".
The 2 USB ports stopped working as soon as I updated to 10.9.1.
I tried zapping PRAM and resetting the SMC.
I even turned the thing off for hours and still nothing.
Any idea how to fix?
Everything was fine until I did the update.
Thanks.

This is not a known bug affecting 2011 MBA computers with 10.9.1 so there is something wrong with your installation. Since zapping PRAM and resetting the SMC did not work I suggest that you try one of two things but first make sure you have backed up your computer.
1) download Mavericks and reinstall it. Sometimes an update goes awry and a reinstall fixes it. Since doing this won't disturb any of your data or applications it would be my first choice. You'll be downloading 10.9.1 so you won't have to perform any updates.
2) boot into the recovery mode, erase the hard drive and then download and install Mavericks. Once Mavericks is finished installing you'll be asked if you'd like to migrate data and applications from a backup. Say yes and if your backup drive isn't already connect it, do so. Select your applications folder and account folders from the list and let the Setup Manager do its magic.
BTW - this is why one of my several backup hard drives is a cloned backup using Carbon Copy Cloner (SuperDuper! Is another good choice). I can boot up my computer using this backup and download the newest version of Mavericks on it if I haven't already done so. I always quit the installer first and make a copy of it because the installer program deletes itself once it is finished which is something of a pain. It gives me more options including being able to boot my computer with it, erase the computer and copy the installer to the computer rather than having to perform the download all over again if step 1 fails. Since I always download a new copy of the OS when Apple releases an update this computer will have the newest version of the installer so I also can skip the download step of option 1 and just copy it over and install on the computer.

Right USB Port stops working after disconnecting device since 10.9.2

Hi,
Since updating to 10.9.2 the right USB port on my MBA stops working after diconnecting a device (tested: external hard drive, USB flash drive, USB HSPA Modem). The only way to get the port recognizing the device on that port is to do a restart. If the device is connected from starting the MBA it works fine, if I then eject the drive and reinsert it or a different USB device the device doesn't get recognized. The devices do get power, my WD passport ultra spins up just fine, the USB HSPA modem also indicates it's working (with signal) but nothing shows up in finder or diskutility. If the modem is connected from start (and thus working) and then disconnect from the internet but not remove the drive I can reconnect to the internet. The problem only occurs after disconnecting the device. The port becomes inactive. The left USB port works as expected.
Steps I've taken:
Disk Persmission
PRAM
SMC
Reapplied the 10.9.2 update
Sent feedback to Apple
Some Output:
Boot Mode: Normal
Total CPU usage:
   User 11%                    System 10%
Max %CPU by process (name, UID, %):
   WindowServer         0   4.6
Loaded extrinsic kernel extensions:
   at.obdev.nke.LittleSnitch (4052)
   com.driver.JRDUSBModemData64 (4.0.5)
   com.protech.NoSleep (1.3.3)
Loaded extrinsic daemons:
   net.sourceforge.MonolingualHelper
   com.oracle.java.JavaUpdateHelper
   com.oracle.java.Helper-Tool
   com.microsoft.office.licensing.helper
   com.freemacsoft.appcleanerd
   com.adobe.fpsaud
   at.obdev.littlesnitchd
Loaded extrinsic user agents:
   com.oracle.java.Java-Updater
   at.obdev.LittleSnitchUIAgent
/Library/LaunchAgents:
   at.obdev.LittleSnitchUIAgent.plist
   com.oracle.java.Java-Updater.plist
/Library/LaunchDaemons:
   at.obdev.littlesnitchd.plist
   com.adobe.fpsaud.plist
   com.freemacsoft.appcleanerd.plist
   com.microsoft.office.licensing.helper.plist
   com.oracle.java.Helper-Tool.plist
   com.oracle.java.JavaUpdateHelper.plist
   net.sourceforge.MonolingualHelper.plist
/Library/PrivilegedHelperTools:
   com.freemacsoft.appcleanerd
   com.microsoft.office.licensing.helper
   com.oracle.java.JavaUpdateHelper
   net.sourceforge.MonolingualHelper
Extrinsic loadable bundles:
   /System/Library/Extensions/JRDMassStorageDriver32.kext
             (No bundle ID)
   /System/Library/Extensions/JRDMassStorageDriver64.kext
             (No bundle ID)
   /System/Library/Extensions/JRDUSBModemData32.kext
             (com.driver.JRDUSBModemData32)
   /System/Library/Extensions/JRDUSBModemData64.kext
             (com.driver.JRDUSBModemData64)
   /System/Library/Extensions/LittleSnitch.kext
             (at.obdev.nke.LittleSnitch)
   /System/Library/Extensions/NoSleep.kext
             (com.protech.NoSleep)
   /Library/Audio/Plug-Ins/Components/A52Codec.component
             (com.shepmater.A52Codec)
   /Library/Internet Plug-Ins/Flash Player.plugin
             (com.macromedia.Flash Player.plugin)
   /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
             (com.oracle.java.JavaAppletPlugin)
   /Library/PreferencePanes/Flash Player.prefPane
             (com.adobe.flashplayerpreferences)
   /Library/PreferencePanes/JavaControlPanel.prefPane
             (com.oracle.java.JavaControlPanel)
   /Library/PreferencePanes/NoSleep.prefPane
             (com.protech.NoSleepPref)
   /Library/QuickTime/AC3MovieImport.component
             (com.cod3r.ac3movieimport)
   /Library/Spotlight/LogicPro.mdimporter
             (No bundle ID)
   Library/Address Book Plug-Ins/SkypeABDialer.bundle
             (com.skype.skypeabdialer)
   Library/Address Book Plug-Ins/SkypeABSMS.bundle
             (com.skype.skypeabsms)
   Library/QuickLook/Pacifist.qlgenerator
             (com.charlessoft.pacifist.qlgenerator)
   Library/Services/Clip to Day One.workflow
             (No bundle ID)
Login hook:
   /Library/Scripts/Hooks/login.sh
Global login items:
   $HELPER_PATH
   $HELPER_PATH
   $HELPER_PATH
   $HELPER_PATH
   $HELPER_PATH
User login items:
   iTunesHelper
   Sparrow
   Sort Menubar Items
   AppCleaner Helper
   SurplusMeterAgent
Safari extensions:
   Shut Up
   AdBlock
   SafariKeywordSearch
   Disconnect
   MapTricks
Restricted user files: 28
Font problems: 0
Elapsed time (s): 130
etrecheck output:
Hardware Information:
          MacBook Air - model: MacBookAir3,1
          1 1.4 GHz Intel Core 2 Duo CPU: 2 cores
          2 GB RAM
Video Information:
          NVIDIA GeForce 320M - VRAM: 256 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 0 days 0:20
Disk Information:
          APPLE SSD TS064C disk0 : (60.67 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    disk0s2 (disk0s2) <not mounted>: 59.81 GB
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          EFI (disk2s1) <not mounted>: 209.7 MB
          Radha (disk2s2) /Volumes/Radha: 1.81 TB (1.73 TB free)
          disk2s3 (disk2s3) <not mounted>: 189.89 GB
          Boot OS X (disk2s4) <not mounted>: 134.2 MB
FireWire Information:
Kernel Extensions:
          at.obdev.nke.LittleSnitch          Version: 4052
          com.driver.JRDUSBModemData64          Version: 4.0.5
          com.protech.NoSleep          Version: 1.3.3
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
                 [loaded]          at.obdev.littlesnitchd.plist
                 [loaded]          com.adobe.fpsaud.plist
                 [loaded]          com.freemacsoft.appcleanerd.plist
                 [loaded]          com.microsoft.office.licensing.helper.plist
                 [loaded]          com.oracle.java.JavaUpdateHelper.plist
                 [loaded]          net.sourceforge.MonolingualHelper.plist
Launch Agents:
                 [loaded]          at.obdev.LittleSnitchUIAgent.plist
User Launch Agents:
User Login Items:
          iTunesHelper
          Sparrow
          Sort Menubar Items
          AppCleaner Helper
          SurplusMeterAgent
3rd Party Preference Panes:
          Flash Player
          Java
          NoSleep
Internet Plug-ins:
          Default Browser.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          JavaAppletPlugin.plugin
          QuickTime Plugin.plugin
User Internet Plug-ins:
Bad Fonts:
          None
Top Processes by CPU:
              12%          com.apple.WebKit.Networking
               6%          Safari
               4%          WindowServer
               3%          EtreCheck
               2%          hidd
               1%          Terminal
               1%          notifyd
               1%          opendirectoryd
               1%          com.apple.WebKit.WebContent
               0%          Dock
Top Processes by Memory:
          147 MB          Safari
          137 MB          com.apple.WebKit.WebContent
          49 MB          mds_stores
          29 MB          com.apple.WebKit.Networking
          27 MB          TextEdit
          23 MB          WindowServer
          20 MB          Disk
          20 MB          Sparrow
          20 MB          CVMCompiler
          18 MB          Finder
Nothing out of the ordinairy. Thanks for any help

It's an Apple Pro keyboard and mouse, the dongle is
plugged into the Mac and not the keyboard. The same
set-up is, and has been working on all our other
Macs.
The sleep issue sounds interesting- hum, maybe...
Is your keyboard plugged into one of the USB connections on an Apple monitor? If so, you may want to change that connection to one that is on the G5 itself. My monitor came with a warning note indicating that problems will likely occur if the keyboard is connected to the monitor.
I also had a problem with the automatic sleep function. After much trouble-shooting and a logic board replacement, it was concluded that coming out of the automatic sleep function with any USB device active would freeze the entire USB bus. After disabling automatic sleep in system preferences, I've had no freezing problems. My machine works fine with the manual sleep function in the Apple Menu.
AndyH

Usb port not working after yosemite update please help

ive got an early 2011 macbook pro i5. and one of my usb stopped working. if i reset my computer it works for a while and then stops again. all these after yosemite update please i really need help on this.. and also when ever im in the middle of something it keeps crashing and saying these things below after i booting back up. ive tried several things, didnt work, tried repairing disk permissions. please anybody with any idea help me!
Anonymous UUID:
CCC4DCA9-48E9-4692-250B-488588FCC69E
Sun Nov 9 17:58:17 2014
*** Panic Report ***
panic(cpu 0 caller 0xffffff802a005eb2): "Possible memory corruption: pmap_pv_remove(0xffffff803b8db998,0x7fff7360f000,0x6d654, 0x6d654d64, 0xffffff8031663cc4, 0xfffffeb38ae0f078): null pv_list!"@/SourceCache/xnu/xnu-2782.1.97/osfmk/i386/pmap_internal.h:768
Backtrace (CPU 0), Frame : Return Address
0xffffff8031663b80 : 0xffffff8029f3a811
0xffffff8031663c00 : 0xffffff802a005eb2
0xffffff8031663cf0 : 0xffffff802a0065e5
0xffffff8031663d50 : 0xffffff8029fb6b4a
0xffffff8031663e60 : 0xffffff8029facd2c
0xffffff8031663e90 : 0xffffff8029f5c747
0xffffff8031663ed0 : 0xffffff802a3c45ff
0xffffff8031663f40 : 0xffffff802a3c425c
0xffffff8031663f50 : 0xffffff802a44dcb2
0xffffff8031663fb0 : 0xffffff802a03ac46
BSD process name corresponding to current thread: suhelperd
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide:
0x0000000029c00000
Kernel text base: 0xffffff8029e00000
__HIB text base: 0xffffff8029d00000
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 7052072843826
last loaded kext at 6483411185500: com.huawei.driver.HuaweiDataCardActivateDriver    1.0.12 (addr 0xffffff7fac6ba000, size 16384)
last unloaded kext at 6604174049015: com.apple.driver.AppleUSBCDC    4.2.2b5 (addr 0xffffff7fac717000, size 16384)
loaded kexts:
com.huawei.driver.cdc_ncm    2.7.2f16
com.huawei.driver.dc_net    1.0.2
com.huawei.driver.cdc_acm    2.6.2f17
com.huawei.driver.cdc_usb_bus    1.0.3
com.huawei.driver.HuaweiDataCardDriver    4.25.45
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.driver.AudioAUUC    1.70
com.apple.driver.AGPM    100.14.37
com.apple.filesystems.autofs    3.0
com.apple.iokit.IOBluetoothSerialManager    4.3.0f10
com.apple.driver.AppleOSXWatchdog    1
com.apple.driver.AppleMikeyHIDDriver    124
com.apple.driver.AppleHDA    266.5
com.apple.driver.AppleMikeyDriver    266.5
com.apple.driver.AppleSMCLMU    2.0.4d1
com.apple.driver.ApplePolicyControl    3.7.21
com.apple.driver.AppleLPC    1.7.3
com.apple.driver.AppleUpstreamUserClient    3.6.1
com.apple.iokit.IOUserEthernet    1.0.1
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AppleHWAccess    1
com.apple.driver.AppleHV    1
com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
com.apple.driver.AppleIntelHD3000Graphics    10.0.0
com.apple.driver.AppleIntelSNBGraphicsFB    10.0.0
com.apple.driver.AppleBacklight    170.4.12
com.apple.driver.AppleMCCSControl    1.2.10
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    4.3.0f10
com.apple.driver.AppleSMCPDRC    1.0.0
com.apple.driver.AppleThunderboltIP    2.0.2
com.apple.driver.SMCMotionSensor    3.0.4d1
com.apple.driver.AppleUSBTCButtons    240.2
com.apple.driver.AppleUSBTCKeyboard    240.2
com.apple.driver.AppleIRController    327.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    35
com.apple.iokit.SCSITaskUserClient    3.7.0
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.6.5
com.apple.driver.AppleUSBHub    705.4.1
com.apple.iokit.AppleBCM5701Ethernet    10.1.2b3
com.apple.driver.AppleFWOHCI    5.5.2
com.apple.driver.AppleSDXC    1.6.5
com.apple.driver.AirPort.Brcm4331    800.20.24
com.apple.driver.AppleAHCIPort    3.0.7
com.apple.driver.AppleUSBEHCI    705.4.14
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleRTC    2.0
com.apple.driver.AppleACPIButtons    3.1
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleSMBIOS    2.1
com.apple.driver.AppleACPIEC    3.1
com.apple.driver.AppleAPIC    1.7
com.apple.driver.AppleIntelCPUPowerManagementClient    218.0.0
com.apple.nke.applicationfirewall    161
com.apple.security.quarantine    3
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement    218.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice    3.7.0
com.apple.iokit.IOUSBMassStorageClass    3.7.0
com.apple.AppleGraphicsDeviceControl    3.7.21
com.apple.kext.triggers    1.0
com.apple.iokit.IOSerialFamily    11
com.apple.driver.DspFuncLib    266.5
com.apple.kext.OSvKernDSPLib    1.15
com.apple.iokit.IOAudioFamily    200.6
com.apple.vecLib.kext    1.2.0
com.apple.driver.AppleHDAController    266.5
com.apple.iokit.IOHDAFamily    266.5
com.apple.iokit.IOFireWireIP    2.2.6
com.apple.driver.AppleSMBusPCI    1.0.12d1
com.apple.iokit.IOSurface    97
com.apple.driver.IOPlatformPluginLegacy    1.0.0
com.apple.driver.AppleGraphicsControl    3.7.21
com.apple.driver.AppleBacklightExpert    1.1.0
com.apple.iokit.IONDRVSupport    2.4.1
com.apple.driver.AppleSMBusController    1.0.13d1
com.apple.iokit.IOGraphicsFamily    2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport    4.3.0f10
com.apple.iokit.IOBluetoothFamily    4.3.0f10
com.apple.driver.IOPlatformPluginFamily    5.8.0d49
com.apple.iokit.IOUSBUserClient    705.4.0
com.apple.driver.AppleSMC    3.1.9
com.apple.driver.AppleUSBMultitouch    245.2
com.apple.iokit.IOUSBHIDDriver    705.4.0
com.apple.driver.AppleUSBMergeNub    705.4.0
com.apple.driver.AppleUSBComposite    705.4.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.7.0
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily    3.7.0
com.apple.driver.AppleThunderboltNHI    3.1.7
com.apple.iokit.IOThunderboltFamily    4.2.1
com.apple.iokit.IOEthernetAVBController    1.0.3b3
com.apple.iokit.IOFireWireFamily    4.5.6
com.apple.iokit.IO80211Family    700.52
com.apple.driver.mDNSOffloadUserClient    1.0.1b8
com.apple.iokit.IONetworkingFamily    3.2
com.apple.iokit.IOAHCIFamily    2.7.0
com.apple.iokit.IOUSBFamily    705.4.14
com.apple.driver.AppleEFINVRAM    2.0
com.apple.driver.AppleEFIRuntime    2.0
com.apple.iokit.IOHIDFamily    2.0.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    300.0
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.AppleKeyStore    2
com.apple.driver.AppleMobileFileIntegrity    1.0.5
com.apple.driver.AppleCredentialManager    1.0
com.apple.driver.DiskImages    389.1
com.apple.iokit.IOStorageFamily    2.0
com.apple.iokit.IOReportFamily    31
com.apple.driver.AppleFDEKeyStore    28.30
com.apple.driver.AppleACPIPlatform    3.1
com.apple.iokit.IOPCIFamily    2.9
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
com.apple.kec.Libm    1
com.apple.kec.pthread    1
Model: MacBookPro8,1, BootROM MBP81.0047.B04, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f96
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.0f10 14890, 3 services, 19 devices, 2 incoming serial ports
Serial ATA Device: ST9320325ASG, 320.07 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: Hub
USB Device: HUAWEI Mobile
USB Device: IR Receiver
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus: MacBook Pro, 20080d.0

I have the same problem when I updated to OS X 10.10 I lost both my USB ports as far as they will not recognize anything that I plug into them. The power part of the USB seams to work since it will recharge my Striiv Touch but nothing shows up when you connect anything to the ports.
I have tried a number of things from rebooting, trying other usb devices that work on other systems with no problems but will not work on my Macbook Pro.
Any Help out there?
Hardware Information: ℹ️
MacBook Pro (Retina, 15-inch, Late 2013) (Verified)
MacBook Pro - model: MacBookPro11,3
1 2.3 GHz Intel Core i7 CPU: 4-core
16 GB RAM Not upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 1:43:41
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad

Help, 10.6.8 update, all usb ports stop working after 10hrs

I've been running 10.5.8 for ever and finnaly tried to update to 10.6.8.. After I did it, the usb ports all kick out any connected devises after around 10 or so hours. I ran of the install disk, using disc utillty, disk repair, and repair permisions a few times and it did not help.
I did the install a few times again to try to see if it would help and didnt.
i tried an erase and install and migrated everything over from my orignal back up external drive that is running 10.5.8 and issue is still there.
My old 10.5.8 back up external drive works fine and does not have this issue, and I have been using that as my start up drive instead and working from there. But that is not really a solution and a temp work around.
Any suggestions would really help. thanks!

I have a early 2008 macbookpro 2.8 duel with silver keys.
I purchaed the 10.6 disk from the apple store. I've had the machine for years and purchased it refurbished from apple.
I did the erase and install and migrated everything over from external drive, then did update to 10.6.8 and the usb ports still would stop working after a few hours.. Then I read on another apple community forus to reset pram, and pull out the power cable, take out the battery and hold power key for 5 seconds, then restart. that seemed to fix usb issue so far..
But overall my computer seems to be running slower then when using just 10.5.8 and it did not wake from sleep once and I had to force power off and restart.. But maybe its just getting used to 10.6.8. we will see..
Also, on another note, my battery is totally dead, and I can only run computer with power cable.. Will this affect things? it never did with 10.5.8..
Oh, on my erase and install, I just did the simplest version and did not do the full erase to zero using he advanced security measures.. I just did the one where it writes on top of everything..

HT1529 Usb Ports dont work after Mountain Lion?

I recently updated my macbookpro to Mountain lion Os X and now whenever I connect a Flash drive to my usb port it doesnt work. I connected my iPad and iPodtouch and it still charges from the usb port, but it doesnt connect to iTunes. Anyone have an idea on what is happening here?
I have a Mid 2010 Macbookpro 13 inch, I upgraded Snow Leapord to Mountain Lion

I would reinstall:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Usb ports stopped working after windows 7 install - pavilion g6-1001sa

After reinstalling windows - My usb ports have completely stopped working - not recognised at all - These happened previously and I was able to download and install a driver which worked - I have been unable to find it this time
thanks
JO
Please help

teethinnit wrote:
I had tried here - the correct driver was not here - it is the USB controller that I am looking for
Ok go to your search bar and type "Change Device installation settings"
and look at my screen shot and this change should make it look for the latest driver.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

First USB port stops working after random time and won't work until I restart

Hey guys
I have this problem on my late 2011 Macbook Pro 13 inch,
It's been for a year already and it really freaks me out and drive me crazy
My first USB port next to the thunderbolt stops working after like 3 days, and it won't respond until I restart my computer or log off and log in again.
If I restart my computer, USB stops working after 3 days and won't respond until I restart
If I log off it works for like a couple of hours and then stops again
I have tried EVERYTHING, SMC reset - no luck, PRAM reset - same results, Upgraded to lion same results, Upgraded to mountain lion - SAME RESULT
And I can't take it to an apple store because I'm not from the US
I am 100% sure this is a software problem and I've seen here that many people have faced this problem
Please help, it really freaks me out

ElectroSpyzz wrote:
Hey guys
I have this problem on my late 2011 Macbook Pro 13 inch,
It's been for a year already and it really freaks me out and drive me crazy
My first USB port next to the thunderbolt stops working after like 3 days, and it won't respond until I restart my computer or log off and log in again.
If I restart my computer, USB stops working after 3 days and won't respond until I restart
If I log off it works for like a couple of hours and then stops again...
I'm sure this isn't what you want to hear but unless you really are using your laptop 24 hours a day, is there any reason why you don't just shut it down and reboot when you're ready to use it again? I have to wonder how many other MacBook Pro owners potentially have the same problem but when they quit computing for the day, their computers quit too.

New T400 - Mini Dock USB Ports not working after hot dock

Hello,
just got a new T400 at work. I know this issue was common with the R60...however I figured this would be resolved with the T400. After PROPERLY undocking my T400 (Start -> undock -> wait for notification and green light)..... I go off to my meetings, etc and all is well with the world. When re-dock the machine, the USB keyboard and Mouse (and sometimes the monitor) will not re-engage. Sometimes I get the monitor...and no keyboard and mouse.
Any ideas on this? Kind of frustrating because I usually have to re-boot (or unplug the mouse/keyboard/ monitor from the dock and plug them directly into the laptop...which defeats the purpose of the dock).
Appreciate the help!
Robert

i have the same problem with a R60 and advanced minidock (winXP SP3). it worked for three years now, but since about one month, when returning to dock, my USB mouse only works in about one of five cases. monitor-usb same problem. keyboard is an old PS/2, this always works. i need to plug the mouse directly to the R60, then it is recognised and works as expected. i do driver updates quite regular, so maybe one of the last drivers have a bug?

Usb ports not working after mavericks install

After installing Mavericks on my mac pro the usb ports are not working for my printer or other usb drives. the only item i can get to be seen via usb is an apple optical mouse. any suggestions would be great.

Hi there grnded189,
You may find the troubleshooting steps in the article below helpful.
OS X Mavericks: If a USB device isn’t working
http://support.apple.com/kb/PH13876
You may also want to reset the PRAM and SMC as well.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
-Griff W.

Thunderbolt Display USB ports not working after 1.2 firmware update

I installed the Thunderbolt Display Firmware Update 1.2 a few days back, and following that update, the USB ports on my display have stopped working completely. The display's Thunderbolt port and Ethernet jacks are working fine, as is the Thunderbolt/power cable connection to my MacBook Air (mid-2011, 11 inch, running OS X Yosemite 10.10.1). Any ideas on a fix?

Do an SMC and PRAM reset.

USB ports stop working after windows 7 installation via USB Boot camp

topend macbook pro retina 15 model purchased in Jan 2014 ,upto date.OS X 10.9.1
tried installing windows 7 ultimate through boot camp using USB. the installation is fine and smooth. windows 7 ultimate is properly installed but the point where you install the support software through USB all the USB ports die out just before logging in into windows. Also a red light on the headphone jack goes on. NO USB flash drive orUSB device is operational or in other words detected by the mac. Hence neither can I finish the support software installation which has all the necessary drivers nor connect to the internet . tried the SMC/NVRAM reset as instructed by the apple support but no change in the situation.
USB ports fully operational when boot in MAC os .
Another problem I face is when I try connect my iphone 4S to macbook pro via USB it keeps connecting and disconnecting and makes the charging sound repeatedly . The same iphone can connect to other laptops flawlessly.
please help .
Thanks

Since you just bought it, you may want to make a Genius Bar appointment and let them diagnose the issue. Use your warranty. Bring your phone and cable along too.

Macbook pro (late 2011) 17 third usb port stopped working after latest yosemite upgrade...

the "third" port being the one closest to the user while the mbp is open in typical use position in front of the user
regardless of reboots or device plugged in, nothing works (anymore) in that port...

Hey Eyraud,
Welcome to Apple Support Communities.
Take a look at the article linked below, it provides general troubleshooting suggestions that may be able to resolve the USB connection issue with your MacBook Pro.
OS X Yosemite: If a USB device isn’t working
If those suggestions don't resolve the issue, try running the Apple Hardware Test as shown in this article:
Using Apple Hardware Test - Apple Support
Take care,
-Jason

My usb port doent work after I plug in my xbox rock candy controller

Similar Messages

Maybe you are looking for