My usb port not work and hot usb port aria please help me

my usb port not work and hot usb port aria please help me

Hi
Please find the link givenbelow might help you to fix your issue.
USB Device Troubleshooting
Fix Windows 7 “USB Device Not Recognized” Error
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

  • Can someone help with problems with Silverlight already downloaded on my MacBook?  Not working and can't trash!  Please help!

    Have a new Mac Book pro and have Netflix program that does not stream down.  Have talked with Netflix, Microsoft and Mac support - who referred me back to Microsoft - and no one has been able to get the Silverlight folder trashed so I can redownload the program.  If anyone has had this problem or can help I would greatly appreciate it.  arcoirissan

    Uninstall Silverlight: https://www.microsoft.com/getsilverlight/get-started/install/removing-silverligh t-mac.aspx
    Reinstall Silverlight: https://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx
    Do the #12 Step here especially and try reinstalling again.
    Step by Step to fix your Mac

  • Hello my battery power has a x on it and the lights are not working and its making a noise - Please assist

    Hello my battery power has a x on it and the lights are not working and its making a noise - Please assist

    The Battery icon with the "X" indicates that your computer does not detect a battery and is operating on electrical power from AC since your computer is plugged in. If your battery is installed but not detected that indicates a problem: 1. the battery is dead; 2. the battery connector is not functioning properly. You mention that there is no response from the indicator lights so it could be either of the two possibilities. The noise is not a good sign. Best to shut it down safely while you can to prevent any possibility of damage and get it to an Apple Genius Bar or Authorized Apple Service Provider to discover the nature of the problem

  • I am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

    i am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

    Did you check your security software (firewall)?
    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
    See:
    * [[Server not found]]
    * [[Firewalls]]

  • Okay i updated my iphone 5 and i changed my password and now i dont remember it i cant restore my phone because my power botton does not work so what should i do PLEASE HELP!!!!!!! Thanks

    okay i updated my iphone 5 and i changed my password and now i dont remember it i cant restore my phone because my power botton does not work so what should i do PLEASE HELP!!!!!!! Thanks

    Hi sigrun from mo,
    If you are having a button issue on your iPhone that prevents you from doing further troubleshooting, you may need to have the phone serviced. You may find the following page helpful:
    Service Answer Center - iPhone
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
    Regards,
    - Brenden

  • HT3209 Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work

    Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work

    You will need to contact the movie studio that produced the DVD and ask if they can issue you a new code valid for Canada. Apple cannot help you, and everyone here in these forums is just a fellow user.
    Regards.

  • I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

    Question
    I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
    '''(in English)'''

    Hi Danny,
    Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
    but not 180, right?
    I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
    =COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
    or
    =SUM(IIF(Fields!TICKET_STATUS=4,1,0))
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • My apple id is not working for my iPhone activation. Please help me.

    my apple id is not working for my iPhone activation. Please help me.
    i'll just restore it.

    Not working in what way?
    Only the Apple ID that was used to enable "Find My iPhone" on the device can be used to bypass Activation Lock.

  • USB-Hub not working on LEFT USB port?

    Hello,
    I have installed Windows 7 Ultimate 64 Bit on my MacBook Pro 13" Retina (Early 2013) and it's running fine. Boot Camp version: 5.0.5033.
    But I have one problem: I bought an external monitor (Dell U2414H) which has an built-in 4-Port USB 3.0 hub. So I connect the Dell monitor using a DisplayPort 1.2a cable and an USB 3.0 cable. But Windows only recognizes the monitor's built-in USB hub when I plug the USB cable into the right USB port (when I sit in front of the MacBook). Then it works without problems. But when I plug the USB cable into the left USB port of the MacBook Windows only says "USB device not recognized". But other devices like USB sticks and USB drives also work without problems on left and right USB port of the MacBook. Also when I boot in OS 10.9 Mavericks the monitor's USB hub is working on both USB ports of the MacBook. So I think it isn't a hardware failure. I also re-installed Windows, but I have still the same problem.
    Do you have any idea, why only the monitor's built-in USB hub is not working in Windows on the left port of the MBP or even how I could fix it?
    Is Boot Camp 5.0.5033 the most current version? I checked the box to download the latest Windows support software and also didn't find anything newer than 5.0.5033 to download, but sometimes I read about 5.1.1 - but where could I download it? AND: Doest it help?
    Thanks in advance!

    I think I've hit a variation on the problem you're enoucntering.  I have a late-2013 13-inch Macbook Pro Retina.  I've just installed Boot Camp and a copy of Windows 7 Pro.  This is my first experience with Boot Camp and Windows on a Mac, so I'm in foreign teritory.
    The install all went fine and Windows 7 booted up fine and so far, all hardware seems to be working as expected, with one exception.  Things went sideways when I tried use it in "clamshell" mode - lid closed with external monitors and all my peripherals attached to a USB hub.  I set up Boot Camp to boot into Windows and attempted to boot.  It would give me the usual boot-up fanfair and a then a gray screen for a few seconds, and then it would reboot.  It just rebooted over and over.   I eventually discovered the issue was the USB hub - without the hub connected , it would boot just fine.  Once it was booted into Windows, I could attach the the hub and everything would be recognized normally.  Furthermore, I could put the system in sleep mode, wake it up and everything would be working fine.  But it simply refuses to boot the USB hub attached.  I've stumbled on a couple related threads - see https://discussions.apple.com/message/23802231#23802231.  The suggestion is that only certain hubs to not work.  I've got two different high quality powered hubs and both display the same behaviour.  The other point is, that when booting into OS X with the same hub, it works perfectly.  So it's a strange problem.
    Note that after reading your post, I did try the hub in both right and left USB ports and that made no difference in my case.  I do have one more hub to try (built into my Dell monitor).  I'll report back if that happens to work.

  • Windows 8.1 IE 11 not working except on Adobe page. Please help!

    I updated to Windows 8.1 IE 11. Since that time I have been told by several websites I need to get a flash player. I went to Adobe help page and did all it said. Adobe page is the only page my flash works perfectly.  My flash still does not work and now I am getting an error window that I do not understand. Error #2440? Not sure if I remembered that right. Also, just so you know I did try to change my browser. This actually made it worse. Any ideas that can help would be great. I am about five seconds away to playing baseball with this new computer!

    The problem is the abomination called Internet Exploder 11.
    Microsoft thought they were really being cool when the wrote the code for it, and the intentionally screwed up the "User-Agent Strings", which websites use to identify the browser and provide the proper content for it.
    Thansk to the "geniuses" <sacrasm intended> in Redmond, websites see IE11 as either a Gecko browser (Firefox) or a Webkit browser (Opera or Safari). Problem is since IE DOESN'T have that browser engine, the identification is false, and it totally screws everything else up. (See: IE11's User-Agent Strings).
    Since the pages can't recognize the browser, they don't recognize any of the plugins, like Flash Player. So far, Microsoft has made NO indication that they have any plan to fix it soon. Personally, I hope this is what it finally takes for EVERYONE EVERYWHERE to realize what a massive pile of garbage IE is and always has been.
    Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
    I'm not big on "pretending" so I recommend actually using another browser.
    Firefox (from Mozilla)
    Opera (from Opera)
    Safari (from Apple)
    Chrome (from Google)
    ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

  • Acrobat 9 pro will not open and run Error (129:6) Please Help!

    Error Message:
    you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling or contacting you IT administrator or Adobe support for help (129.6)
    Everything was working fine and it just stopped. Please help me fix it.

    This is a user forum, but with Adobe you might find better help here than in other places anyway. Many of the users here have been through most of the problems and if you hit one that has been there you will likely get a good answer. Some of the folks are good at making suggestions to try (as they would try) and others will try to replicate the problem if you give enough info. Many of us are a bit crazy for spending so much time here, but we learn along with helping, an aspect we enjoy - takes the edge off the day! (OK, maybe I am speaking for myself.)
    If you run into some other specifics that may help others provide you ideas to try, do come back. If you find a solution to your problem, please report it also. Bill

  • USB port Not working and Drivers won't install

    My Ethernet Controller, PCI device, SM Bus Controller, Universal Serial Bus (USB) Controller, and Universal Serial Bus (USB) Controller drivers will not install. Therefore I’m unable to connect to a wired connection and use the two USB ports on the left side of my HP DV6-6C10US Entertainment PC laptop.
    I replaced my hard-drive a few days ago and reloaded windows 7 onto my laptop using another recovery disk.
    I tried downloading the appropriate drivers from HP but they will not work either.
    Product # A6Y49UA#ABA
    Thanks for your assistance

    Hi:
    Download and install the AMD Chipset Drivers and reboot.  You want the first file listed on the webpage.
    http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064
    Ethernet:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102406-1&cc=us&dlc=en&lc=en...
    PCI Dev:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102202-1&cc=us&dlc=en&lc=en...

  • New T400 - Mini Dock USB Ports not working after hot dock

    Hello,
    just got a new T400 at work. I know this issue was common with the R60...however I figured this would be resolved with the T400.  After PROPERLY undocking my T400 (Start -> undock -> wait for notification and green light).....  I go off to my meetings, etc and all is well with the world. When re-dock the machine, the USB keyboard and Mouse (and sometimes the monitor) will not re-engage.  Sometimes I get the monitor...and no keyboard and mouse.
    Any ideas on this? Kind of frustrating because I usually have to re-boot (or unplug the mouse/keyboard/ monitor from the dock and plug them directly into the laptop...which defeats the purpose of the dock).
    Appreciate the help!
    Robert

    i have the same problem with a R60 and advanced minidock (winXP SP3). it worked for three years now, but since about one month, when returning to dock, my USB mouse only works in about one of five cases. monitor-usb same problem. keyboard is an old PS/2, this always works. i need to plug the mouse directly to the R60, then it is recognised and works as expected. i do driver updates quite regular, so maybe one of the last drivers have a bug?

  • Internal web cam does not work and unknown usb device pops up

          I have had my Pavillion DV6 1230us laptop now for about 7 years now and it was working great untill last year. When the lap top comes out of sleep mode or I restart the computer the " unkown device" balloon pops up. I have tried the following fixes, un-installing all the usb devices and did a reboot, I removed the main battery and held the power button for 2 minutes and re-installed it , I have re-installed the webcam drivers from HP and even removed and installed  the small mother board battery with no sucess. When the " unknown device " balloon pops up I can hear an audio prompt like I am plugging and un-plugging a usb device in one of the ports but I am just watching and hearing the problem happening.

    Hey Scotman,
    The Webcam would not be listed as USB device as it is built into the Notebook. Do you have anything connected USB? What do you see in device manager for your Image devices? Here is a video on Webcam. I am not sure if anything will help you in it or not. If you remove all USB devices in the device manager and remove all USB cords from the computer the balloon should not appear on restart.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Z87-gd65 --USB Headet not working and cant bios

    Ok, i have a z87-gd65 and my usb headset will not work at all in SLI. I take one card out, it then seems to work..sumtime, must take it in and out everytime i restart PC and hopes it works.
    After some research I seem to need 1.4 or higher beta bios to solve this problem however after following your guides to the letter the board refuses to update bios. When you click the file through MFlash the system just freezes. Im worry even it 1.4 or higher bios come out of beta and are standard I will still not be able to update the bios and i'll be still in my first predicament...no usb sound working.
    Please help...or should i just RMA the board??

    USB stick bootable? If not, use the forum tool 'Fix My USB Key' option first. USB stick formatted FAT32? Follow the instructions in the link.
    https://forum-en.msi.com/index.php?topic=169827.msg1253353#msg1253353

Maybe you are looking for

  • Design view is out of whack

    I was working on Dreamweaver CS3 a couple of days ago and all of a sudden (I'm pretty sure I pressed something) the design-view went weird. I usual work in split view to see the coding and design simultaneously. Now, the design view displays the give

  • I deleted all my events in iPhoto

    Hi some how i have managed to delete all my events in iphoto i do not have time machne set up yet and would really like to get them all back can anyone offer any help, do Mac have a system restore point like windows, am still getting use to the Mac o

  • Reg:Abap program table name

    Hi friends, Which table contains all the abap programs ? Thanks and Regards V.Raja sekaran

  • After syncing phone with outlook, some of my appts dissapeared????

    After syncing phone with outlook one of my recurring appts. in outlook that had been previously synced has disapeared in outlook, it looks like all my other appts are still intact.  my iphone still shows the recurring appt. so it didnt delete from th

  • HT3819 Can I share an ebook that I purchased from the iTunes store with a friend?

    I wish to share books that I have purchased on iTunes With friends.  Is that possible?  My goal is to share with teachers in Africa who teach at a school which I Volunteer at.