My USB Stick(Thumb Drive) not Supported and Anothe...

I have 8Gig Patriot Thumb drive. I used OTG USB cable to connect it to my N8 but phone says USB Device is not supported. ALso When I try to connect my Iomega External Hard drive I get the same error.  Can this be possible? Cause patriot and iomega is very well known company in hard drive and thumb drive. I would be very surprise if N8 doesn't support their products.
So can anyone confirmed for me that  those companies simply not supported in N8 or I am getting at error which I am not suppose to.
Also there is one more thing, I usually have around 8.9gig left in internal memory. Whenever I try to move 6 gig Mkv files to internal drive I am keep getting error that there isn't enough memory left. Then I tried with my 16gig microsd card. It had 14.9 gig memory left and I tried to copy 6.9 gig Mkv file to microsd card. I got the same error. So can any help please?
Thanks

rajnikant90 wrote:
Also there is one more thing, I usually have around 8.9gig left in internal memory. Whenever I try to move 6 gig Mkv files to internal drive I am keep getting error that there isn't enough memory left. Then I tried with my 16gig microsd card. It had 14.9 gig memory left and I tried to copy 6.9 gig Mkv file to microsd card. I got the same error. So can any help please?
Not a computer engineer but isn't this like using a PC with less than 10% free space, it all becomes unworkable. For internal memory doesn't it have to allocate 6GB first leaving it less than 3GB to actually carry out the task?
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

  • In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

    In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

    Yes, junker thumb drives pour like rain in the market.  
    Which makes are working on your Air, and which arent?
    Stick to Sandisk and a couple of other reliable mfg. of memory sticks

  • OpenSQLException: JDBC driver not supported?

    Hi @ all,
    I need to connect to a DataSource with the WebAS 7 via SQLJ. As I try to connect to it with the SQL Engine set to "Vendor SQL" I get:
    "The given connection "com.sap.engine.services.dbpool.cci.ConnectionHandle" is not an Open SQL connection"
    As I try to get a connection to the dataSource via SQLJ with SQL Engine set to "Open SQL" or "Native SQL", I get the following Exception:
    ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: com.sap.sql.log.OpenSQLException: JDBC driver not supported for MS_SQL_SERVER database.
    How can I get the SQLJ- Support?
    Kind regards,
    Uwe
    Message was edited by:
            Uwe Kunath

    Hi Uwe, all,
    for using Native SQL/JDBC or Open SQL/JDBC, the database itself and the JDBC driver must be recognized as being in the supported set. The answer to that depends on what you mean in detail by "Web AS 7". Roughly speaking, it should be the JDBC driver released by Microsoft.
    Open SQL/SQLJ is only available with a Open SQL/JDBC data source. Hence, there is no way around using Open SQL/JDBC.
    Now, Open SQL/JDBC and Open SQL/SQLJ both requires tables (and other database objects) to be deployed via the Open SQL for Java Dictionary. Up to and including WebAS Java 7.1, the Open SQL/Dictionary supports deployment to the system database, i.e. the database (and schema) used by the installed server itself.
    Given the above, the JDBC driver for a Open SQL/JDBC data source must already be present, because it must be the driver used by the server itself. When defining data sources, it is referred to as "system driver".
    This leaves us with a Open SQL/JDBC data source to the system schema. You can then also consider to establish a data source alias to the server's system datasource.
    Hope this helps. Best Regards, Dietamr

  • Jabber 4.4 "Graphics card or driver not supported" error on one machine but not another.

    Hi, I looked at the KB document but the email link on it no longer works.
    I have two end-users using Jabber 4.4 on identical machines, same specs, same driver build and OS image. One gets the  "Graphics card or driver not supported" error, the other does not.
    We have two DellOptiPlex 7010's,
    Both had 2 instances of AMD Radeon HD 7470 - they are dual monitor machines.
    In both cases the driver version 8.922.0.0, Driver Date 12/6/2011. This is the latest Dell has on their website.
    On one machine when I run a fresh install for Jabber for TelePresence 4.4 it works fine. But on another the user first gets
    "supportabilitytest.exe has stopped working
    A oriblem cause the program to stop working correctly. Please close the program."
    Then when that's closed out we get:
    "Graphics card or driver not supported!
    New features in this version of Jabber Video are not supported by your computer's graphics driver.
    Update to the newest graphics driver available and run Jabber Video again."
    I can't believe it's just a matter of upgrading the drivers because in this case one machine with identical drivers works.
    I appreciate any insights, thanks !

    Hi ksouthall,
    It sounds like the openGL supported version did not install on the one that is failing.  There isn't much we can do regarding that error.  Best practice is to always upgrade to the latest manufacturer's available driver.  Client requirements are below.
    Windows 7 (32-bit or 64-bit), Vista, or XP (SP 2 or newer), with OpenGL 1.2 or newer.
    For 720p HD video calls, Intel Core2Duo @ 1.2GHz or better.
    For VGA video calls, Intel Atom @ 1.6GHz or better.
    Webcam, built-in or external. You need an HD webcam if you want other callers to see you in HD.
    Broadband Internet connection with a recommended bandwidth of 768kbps upstream and downstream. You need about 1.2Mbps upstream and downstream for 720p HD video calls.
    Regards,
    Jason

  • HT4623 When I plug my ipad to itunes i get the error message that it is not supported and I have to go to itunes and get itunes re-installed?  i never had this problem before.  if i do this will i loose all my files, music, etc?

    When I plug me ipad to itunes i get the error message that it is not supported and that i have to go to itunes and get "itunes installer" and re-install.  if i do this will i loose my files and music?

    No, you should not lose anything.

  • I just got a new ipod 5 and when I plugged in the charging cord that came with it, it says it is not supported, and may not charge. It worked the first few times, but now it won't charge at all.

    I just got a new ipod 5 and when I plugged in the charging cord that came with it, it says it is not supported, and may not charge. It worked the first few times, but now it won't charge at all.

    - See:      
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store. The cable as well as the iPod, is covered by the warranty.
    Apple Retail Store - Genius Bar                          

  • Since downloading OS X Mountain Lion my WordSearch9 will not open. I got a message that X11 was not supported and directed to a sited to download XQuartz. Now when I try to launch WordSearch9 I get a message "X11 cannot be found.

    Since downloading OS X Mountain Lion my WordSearch9 will not open. I got a message saying that X11 was not supported and directed to a site to download an update "XQuartz" which I did. Now when I try to launch WordSearch9 I get a message "X11 cannot be found". I did follow the instructions to download and install XQuartz, but there still seems to be a problem. Anyone have an idea?

    Your report indicates Mountain Lion, but your footer indicates Lion.  I'll assume you're on 10.8.2; on the current Mountain Lion version.
    Rebooting is fine.
    The posted diagnostics look like there might be a problem with the Xquartz install, or it is not starting, or it's not authorized for the sandbox.  (But I don't know enough about that to be certain.)
    Try launching X11.app directly from your Applications > Utilities folder, and see if that works, or if shows any dialog boxes, or that reports any errors.
    If you had an Xquartz kit installed and it's not the 2.7.4 (current) Xquartz kit, then please update to that version.  (I'm assuming that site is where you got your Xquartz kit from, too.)
    I'd also suggest also discussing this more directly with the Xquartz folks via mailing list or the IRC channel, or collecting up the Xquartz logs and then posting a bug over at the Xquartz site; here are the details on bug reporting for Xquartz.

  • I get the following message when i try to open ALL my documents : frozen panes and split panes are not supported and were removed. my documents are blank

    i get the following message when i try to open any of my documents : frozen panes and split panes are not supported and were removed. All my documents open blanc!

    Hi Louisa,
    louisa_16_za wrote:
    i work with Numbers on my MiniMac and then save the files as Excel because the university only works with Windows.
    Numbers is not an Excel clone. Importing and exporting between Numbers and Excel will eventually build up glitches.
    If the university only works with 'Windoze' it might be better if you use Excel or a free version of Office (for example, Libre Office or Open Office).
    If your marks depend upon a professor who uses Excel, go with the flow.
    http://www.howtogeek.com/187663/openoffice-vs.-libreoffice-whats-the-difference- and-which-should-you-use/
    Regards,
    Ian

  • Text frames not supported and images can't be imported when trying to open word document, can this be fixed?

    trying to open a word document in pages, no images, diagram r tables are seen, states problems are text frames not supported and that images can not be imported. the document opens fine in mircosoft office. can this be fixed or do i need to buy microsoft office for the imac, thanks andrea

    Pages isn't a perfect converter of Word documents. They are differently coded. Some documents opens well but some don't.
    You could try opening the document in LibreOffice, a free clone of MS Office.

  • I have purchased Iphone 4 from US and its not having sim in it and rt now when i have updated this to io5 ,it is showing "sim card inserted in iphone is not supported" and i am not able access aything."

    I have purchased Iphone 4 from US and its not having sim in it and rt now when i have updated this to io5 ,it is showing "sim card inserted in iphone is not supported" and i am not able access aything."
    Earlier i was able to use all application in this using IOS 5.0.1.
    I have format it and after that i am not able to use it.
    How to restore my itunes to 5.0.1???

    Well, welcome to the world of "hacked" phones. If your purchase was from the US, you obviously purchased an iPhone that is locked to a US carrier. The iPhone must have been jailbroken and unlocked via software to accommodate your foreign SIM card. Now that you have updated the phone, it is locked back to the US carrier. Only the carrier can authorize Apple to unlock the iPhone and none of the US carriers will unlock the iPhones. Best suggestion is to sell the phone and obtain a factory unlocked version directly from the Apple store.
    To answer your other question, there is not a supported method to downgrade iOS.

  • I've just upgraded to OS 10.8.6. Now when I try to export an ipages 09 document to .doc, I get the message "character borders are not supported and were removed," and the file is saved as .pages.

    I've just upgraded to OS 10.8.6. Now when I try to export an ipages 09 document to .doc, I get the message "character borders are not supported and were removed," and the file is saved as .pages.

    I think you would get more expert advice if you asked this in the iWork forum - its really an iWork question
    G

  • I installed the window 7 os in to my mac book pro. after that the partition is not supported and then the folder with question mark flashing on my screen. plaese helf me what to do next to resume the mac os x?

    i installed the window 7 ultimate OS in to my mac book pro. after that the partition is not supported and then the folder with question mark flashing on my screen. plaese helf me what to do next to resume mac mac os x?

    Assuming that you tried to install Win 7 in bootcamp.
    Power on the machine and press and hold the "option" key when you hear the bong sound.
    Select the Macintosh HD icon and press "return" or just click on the icon.
    Once booted into OS X go to System Preferences and select the Startup Disk icon and configure startup to use the Macintosh HD.

  • I made a beautiful invitation for my sons graduation in pages it has 1 photo on the front and 5 photos on the back. When I try to export it to my work pc the text is not supported and it looks terrible. Help!

    I made a beautiful invitation for my sons graduation in pages it has 1 photo on the front and 5 photos on the back. When I try to export it to my work pc the text is not supported and it looks terrible. Help!

    How did you transfer it to the PC?
    Not good to export as a Word .doc/x, better to:
    Menu > Export > PDF
    Peter

  • I have an ipad air and I'm trying to play a video I purchased from iTu and it says cannot open not supported and the codec says protected. How do I fix?

    I have an ipad air and I'm trying to play a video I purchased from iTu and it says cannot open not supported and the codec says protected. How do I fix?

    FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
    For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
    Phone: 800-275-2273 How to reach a live person: Press 0 four times
    Hours of Operation: Mon-Fri: 9am-5pm ET
    Email: mailto:[email protected]
    How to report an issue with Your iTunes Store purchase
    http://support.apple.com/kb/HT1933
    https://reportaproblem.apple.com/
    iTunes Purchase Problems: How to Report a Problem to iTunes Support
    http://tinyurl.com/7tscpa7
    iOS: Troubleshooting applications purchased from the App Store
    http://support.apple.com/kb/TS1702?viewlocale=en_US&locale=en_US
    How to Get a Refund from the App Store
    http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
    Getting Refunds for your iTunes Store Purchases
    http://www.labnol.org/software/itunes-app-store-refunds/13838/
    Canceling a Digital Subscription
    http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
     Cheers, Tom

  • I keep getting a pop up dialogue box telling me the URL is not supported and that it can't connect to the server, even though I am able to surf the net

    I keep getting a pop up dialogue box telling me the URL is not supported and that it can't connect to the server, even though I am able to surf the net

    Are you using OS X Server here, or is this a connection with some other server?  If this is OS X Server, what version is running?
    Please post a screen shot of the dialog box, and an example of a URL that's failing.  (You can use ⌘⬆4 (command shift 4) to activate the screen capture mechanism, and the camera icon here to upload the image.  Please make sure you don't include any sensitive information in what you're uploading.)

Maybe you are looking for

  • How to convert VHDX to VHD file format on windows 8 / Windows server 2012?

    Here is an article to describe how to convert virtual hard disk VHDX file format to VHD  http://anuraggawande.blogspot.in/2012/10/vhdx-to-vhd-conversion.html

  • Vat code in billing document

    Hi, Can you please tell me that if the vat registration number is changed manually during invoice creation whether the tax code will also change due to this? If so why? Thanks & Regards Sonalika

  • What to backup in oracle XE instance

    Hi, I have installed oracle XE, enabled archivelog and made a succesfull backup (by using RMAN tool of oracle from start -->programs--> oracle--> backup database). Now i want to backup the "crucial data" to a second hard disk for increased redundancy

  • Want to split String on '$' character

    i have a String str = "car$bar$road$building$motor" now i want to split that string on "$" sigh. i m using String split method i.e. String[] arr=str.split("$"); but its not workin......i know i can use StringTokenizer class to split it. but i want to

  • Treasury Management- split postings by business areas

    Hi, Currently we have the FSCM TM set up in a way that we do not differentiate by Business Areas. All postings go to central place and distributed later by percnetage base. In additional account assignments we have only one receiver defined. So the n