My user name does not show in finder

I recently had to do a re-install of OS X Yosemite on my brand new Macbook Pro due to some files being corrupt during the transfer of my aperture and iTunes librarys from my old iMac to the new Macbook. (Aperture appears to be the problem)
After the re-install everything appeared as a new computer. After signing in to my accounts, I went to "Finder" to open my username and music file to transfer my iTunes library over. My user name does not appear at all in the Finder sidebar. Have doing something wrong here.

You can customize your Finder sidebar to show whatever you want. Some of the defaults (including the home folder you're talking about) are available by going to Finder menu - Preferences - Sidebar. You can add others by dragging them from the right side of the Finder window into the sidebar.
Matt

Similar Messages

One of the user names does not show up on the login screen

There are two admin accounts set up on the computer but only one of them shows up on the login screen. Any ideas why and how to change it?
Thanks a lot.
Tomek

Thank you for the reply, but it does not work for me. I have no clue why.

RDS Gateway + Smart Card Error [ The specified user name does not exist.]

I have the following Windows Server 2008 R2 servers:
addsdc.contoso.com, AD DS Domain Controller for contoso.com
adcsca.contoso.com, AD CS Enterprise CA, CDPs/AIAs published externally.
fileserver.contoso.com, RDS Session Host for Administration enabled
rdsgateway.contoso.com, RDS Gateway enabled
tmgserver.contoso.com, 'Publishing' rdsgateway.contoso.com but with pass-through authentication
And the following Windows 7 PCs:
internalclient.contoso.com
externalclient.fabrikam.com
There's no trust between the domains, the external client is completely separate on the internet but the CA certificate for contoso.com has been installed in the trusted Root CA store. All servers have certificates for secure RDP.
I enrolled for a custom 'Smart Card Authentication' certificate with Client Authentication and Smart Card Logon EKUs from the CA, stored on my new Gemalto smart card using the Microsoft Base Smart Card CSP.
From internalclient.contoso.com, I can RDP to fileserver.contoso.com
using the smart card just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using a username and password just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using the smart card to authenticate to the gateway, and a username and password to authenticate to the end server, just fine.
BUT from when using a smart card to authenticate to the end server via the gateway, it fails with:
The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support.
When I move the client into the internal network and try the connection again (still via the RDS Gateway), it works fine - the only thing I can think of is being outside the network and not being able to contact the AD DS DC for Kerberos is causing the issue
- but I'm pretty sure this is a supported scenario?
The smart card works fine internally, the subject of the certificate is the user's common name (John Smith) and the only SAN is
[email protected] which matches the UPN of the user account as it was auto-enrolled.
Does anyone have any ideas?

I had a similar issue where I am using a smart card through a Remote Desktop Gateway. I had to disable Network Level Authentication (NLA) on the destination Remote Desktop Server. If anyone has another way around this, I'd appreciate hearing it. I'd prefer
to use NLA.

HT201737 how do you close a thumb drive that does not show in finder?

How do you close a thumb drive that does not show in finder?

What do you mean by "Close?"
Eject??
If so, you could use Go to Computer to find it if it is not in the Sidebar or on the Desktop. Ctrl-click or Right-click on the drive and choose Eject <diskname>
Or, you could set it to show in the SideBar in the Finder Preferences, SideBar tab. Then, it would have an eject icon next to it in the Sidebar.

File name does not showing the InDesign icon?

I have got few files from my client and they said it is an InDesign CS2 version file. but the file name does not showing the InDesign icon on the file name, though I have CS2 and I have tried other version too.
Also I could not open the file in any version.
Can somebody help me?

there is no screen shot...
You must either post a link to it on another server or embed it into a post using the camera icon on the web page like this:

When someone messages me their contact name does not show up as how i saved them!!! does this mean someone has access to my phone?

When I get a message from my friend, her contact name does not show up the way I saved her and I am wondering if someone has hacked my phone or something

That is what I am trying to work through. I understand you are seeing it in Notifications, that was what I was trying to confirm. When you open the message, what is displaying on the phone, Juan? Is Notification the only place that you are seeing this name differently? And yes, if you have the name saved as John, it should display as John. How are you backing up/syncing your contacts? Are you using a supported application on the computer, or are you using a cloud service, such as iCloud? If you go into your contacts and look in the upper left corner of the application, does it list more than one source for your contacts? Do you have more than one person with the same phone number listed in contacts, similar to having two people that work at the same place? Is the Notification only displaying a first name and no last name? Do you have first names only in your contacts?

E-mail to the recovery user name does not come

e-mail to the recovery user name does not come
what i do?
I'm sorry for the mistakes i am polish

The employer should be setting its Macs up with corporate Apple IDs and corporate volume licesnses for the software. Individual employees personal IDs do not provide the Licensed Copy End User License Agreement that the Macs need in a business evironment. Your personal Apple ID only carries a consumer license and by law any of your own apps that you install on the Mac will it is in your control would need to be removed when you turn the Mac back over to the company.
When a Mac is first set up the original Apple ID is always going to be associated with that Mac, its installed version of OS X and the preinstalled iLife apps. And only that ID can update the iLife apps if they were properly accepted into the Apple ID*. But you should be able to sign out of the active Apple ID in the Store menu of both the iTunes App and the Mac App Store app, then sign into your Apple ID to install any of your own content that you wish to have on the Mac.
*If the iLife apps were not correctly accepted into the setup Apple ID, then they cannot be updated and no one can buy them again on that Mac with any Apple ID.

Song plays in iTunes, but file does not show in Finder

Bizarre issue. My 26,000+ song iTunes Library lives on an external LaCie drive. All the songs play fine in iTunes (and I can hear the drive spin up when I go to play them). However, for a few thousand of the songs, the song's file is not in the physical location where iTunes shows it to be.
An example is below... these are two song file locations from the 'Master Tune Library.xml' exported from iTunes. Both of these files
show in iTunes, and they both play just fine from iTunes (no exclamation mark next to the song names). Yet only the first file (one ending in 1219.mp3)
is at that location. The one ending in 1249.mp3 does not show in that location, either via Finder, or via Terminal.
From Terminal I get no results from "find /Volumes/LaCie500 -name espace_20101103_1249.mp3" (without the dbl quotes) But if I run the same command for the 1219 file, it does find it in the expected location. Really stumped as from where iTunes is playing ...1249.mp3.
/Volumes/LaCie500/myTunes/Unknown Artist/Unknown Album/espace_20101103_1219.mp3
/Volumes/LaCie500/myTunes/Unknown Artist/Unknown Album/espace_20101103_1249.mp3
Mac Mini
Mac OS X 10.5.8
iTunes 10.5
iTunes Media folder location is /Volumes/LaCie500/myTunes Both options underneath for "organize" and "copy files ... when adding to Library" are checked.
Thanks!

Try using EasyFind utility to reveal the files.
Are you absolutely positive those files exist? You have verified with iTune's summary view thatthe files is what you think it is?
Show In Finder will usually not only open the directory but also leave the actual file highlighted.

AE shows WD External disk in Utility, does not show in Finder

Hi,
I just bought an AE (802.11n). The setup was relatively easy. I updated both the software Airport Utility (5.3.2) and Firmware (7.3.2).
When I connect my freshly formatted (HFS+ Case-Sensitive + Journaled) external WD 120Gb HD (which has an external powersupply) to the USB port, it DOES show in the Airport Utility (though without the name), but I cannot connect to it, neither does it show in Finder, etc.
When I take a freshly formatted (HFS+ Case-S, Jour.) Memorystick of 4Gb, and I plug it in it both shows in the Airport Utility and I find it in the shared section of Finder.
I can attach the WD Harddrive to my local MBPro and it works fine (either through USB & Firewire)
What is going on? Has anyone else experienced this (the topics I found dealt with Windows, or wrongly formatted, or Time Machine, etc.)?

Thanx for your suggestion: this was however already checked. Just to make sure I unchecked and re-checked the option. No difference
Except for the WD disk not showing (my intend is to get it working), an additional question would be: WHY is there no problem when using a memory stick?
Apparently the memory stick has a 'quality/ability' which the external HD does not have causing it to function but which one?

Hard disk does not show in finder

WE had a system failure with our server instance a month back and since then, one of my internal HD's will not show in finder. It's also causing carbon copy pro to fail when trying to find it. I have verified it can be seen in the disk utility and from a terminal prompt. I rant this to confirm:
{ diskutil list; echo; diskutil cs list; } | open -f -a TextEdit
No matter what I do, i cannot see it. Verify and repair in disk util come up saying it's okay. I have selected show HDD's in finder preferences. A possibly related side effect is that my users, who can browse this over the network, cannot search in the directory.
Any help you can lend would be helpful.
OSX version 10.8.4
TC

Not partitioned - part of a raid. Was initially formatted, yes. THis has been in production for a couple of years and just dropped out. "THIS DISK" is the disk that vanish. I renamed it for forum purposes.
Results:
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS basecampHD              999.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk1
   1:                        EFI                         209.7 MB   disk1s1
   2:                  Apple_HFS HD2                     999.9 GB   disk1s2
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.5 TB     disk2
   1:                        EFI                         209.7 MB   disk2s1
   2:                  Apple_HFS THIS DISK               1.5 TB     disk2s2
/dev/disk3
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.5 TB     disk3
   1:                        EFI                         209.7 MB   disk3s1
   2:                  Apple_HFS TTHIS DISK.Backup        1.5 TB     disk3s2
/dev/disk4
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:        CD_partition_scheme                        *217.8 MB   disk4
   1:              CD_ROM_Mode_1 TSIXL-320W              189.7 MB   disk4s0
/dev/disk5
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *3.0 TB     disk5
   1:                  Apple_HFS ServerTime              3.0 TB     disk5s1
No CoreStorage logical volume groups found

Custom header name does not show in ALV...

Hello Experts,
I am using custom column names for my ALV display but when I display it does not show
the title I specified. For example, one of my columns which is 'AMOUNT' has a custom name
which is 'YTD AMOUNT'. But how come it still shows 'AMOUNT' in my header? I am using
cl_salv_table for my ALV. Below is my code:
TRY.
        cl_salv_table=>factory(
          EXPORTING
            list_display = 'X'
          IMPORTING
            r_salv_table = lcl_table
          CHANGING
            t_table      = gt_output ).
      CATCH cx_salv_msg.                                "#EC NO_HANDLER
    ENDTRY.
    lcl_functions = lcl_table->get_functions( ).
*   Set all standard ALV functions
    lcl_functions->set_all( abap_true ).
    lcl_columns = lcl_table->get_columns( ).
    lcl_columns->set_optimize( abap_true ).
*   Set display to striped pattern
    lcl_display = lcl_table->get_display_settings( ).
    lcl_display->set_striped_pattern( cl_salv_display_settings=>true ).
*/Set column names
    TRY.
        lcl_column ?= lcl_columns->get_column( 'DESCRIPT' ).
        lcl_column->set_medium_text( text-h01 ).
        lcl_column->set_long_text( text-h01 ).
        lcl_column->set_output_length( '40' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'BUKRS' ).
        lcl_column->set_medium_text( text-h02 ).
        lcl_column->set_long_text( text-h02 ).
        lcl_column->set_output_length( '12' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'KHINR' ).
        lcl_column->set_medium_text( text-h03 ).
        lcl_column->set_long_text( text-h03 ).
        lcl_column->set_output_length( '17' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'KOSTL' ).
        lcl_column->set_medium_text( text-h04 ).
        lcl_column->set_long_text( text-h04 ).
        lcl_column->set_output_length( '10' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'AUART' ).
        lcl_column->set_medium_text( text-h05 ).
        lcl_column->set_long_text( text-h05 ).
        lcl_column->set_output_length( '04' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'KTEXT' ).
        lcl_column->set_medium_text( text-h06 ).
        lcl_column->set_long_text( text-h06 ).
        lcl_column->set_output_length( '20' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'AUFNR' ).
        lcl_column->set_medium_text( text-h07 ).
        lcl_column->set_long_text( text-h07 ).
        lcl_column->set_output_length( '12' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'ACTUAL' ).
        lcl_column->set_medium_text( text-h08 ).
        lcl_column->set_long_text( text-h08 ).
        lcl_column->set_output_length( '10' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'COMMIT' ).
        lcl_column->set_medium_text( text-h09 ).
        lcl_column->set_long_text( text-h09 ).
        lcl_column->set_output_length( '10' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'TOTAL' ).
        lcl_column->set_medium_text( text-h10 ).
        lcl_column->set_long_text( text-h10 ).
        lcl_column->set_output_length( '10' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'BUDGET' ).
        lcl_column->set_medium_text( text-h11 ).
        lcl_column->set_long_text( text-h11 ).
        lcl_column->set_output_length( '15' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'AMOUNT' ).
        lcl_column->set_medium_text( text-h12 ).
        lcl_column->set_long_text( text-h12 ).
        lcl_column->set_output_length( '15' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'AGE' ).
        lcl_column->set_medium_text( text-h13 ).
        lcl_column->set_long_text( text-h13 ).
        lcl_column->set_output_length( '15' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
*/Set aggregations
    TRY.
        lcl_aggregations = lcl_table->get_aggregations( ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_aggregations->add_aggregation( 'ACTUAL' ).
      CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing."#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_aggregations->add_aggregation( 'COMMIT' ).
      CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing."#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_aggregations->add_aggregation( 'TOTAL' ).
      CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing."#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_aggregations->add_aggregation( 'BUDGET' ).
      CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing."#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_aggregations->add_aggregation( 'AMOUNT' ).
      CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing."#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_aggregations->add_aggregation( 'AGE' ).
      CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing."#EC NO_HANDLER
    ENDTRY.
*/Hide columns
    TRY.
        lcl_column ?= lcl_columns->get_column( 'SETNAME' ).
        lcl_column->set_visible( if_salv_c_bool_sap=>false ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'TXT' ).
        lcl_column->set_visible( if_salv_c_bool_sap=>false ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'BUDAT1' ).
        lcl_column->set_visible( if_salv_c_bool_sap=>false ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'COMMIT' ).
        lcl_column->set_visible( if_salv_c_bool_sap=>false ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'ACTUAL' ).
        lcl_column->set_visible( if_salv_c_bool_sap=>false ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'BUDAT2' ).
        lcl_column->set_visible( if_salv_c_bool_sap=>false ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'ASTNR' ).
        lcl_column->set_visible( if_salv_c_bool_sap=>false ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'AVAIL' ).
        lcl_column->set_visible( if_salv_c_bool_sap=>false ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'CTRDIV' ).
        lcl_column->set_visible( if_salv_c_bool_sap=>false ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'CTRORD' ).
        lcl_column->set_visible( if_salv_c_bool_sap=>false ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    lcl_events2 = lcl_table->get_event( ).
    CREATE OBJECT lcl_handle_events.
    SET HANDLER lcl_handle_events->on_link_click FOR lcl_events2.
    SET HANDLER lcl_handle_events->on_top_of_page FOR lcl_events2.
    lcl_display_settings = lcl_table->get_display_settings( ).
    lcl_table->display( ).
Also, my top of page only display if use LIST display but when I use GRID, it does not show.

Thanks anyways...

Memup hard disc does not show in Finder

I have attached a Memup 250GB hard disk by USB to my MBP. The disk does not show up in Finder, nor in Disk Utility.
The disk works fine if I plug it into a PC. I have formatted it on the PC to FAT.
Any suggestions on how I can get it to work on my MBP?

Sounds like you have a connection issue. Try all the USB ports and a different cable.
Ciao.

Dvd drive does not show in Finder

My DVD drives (internal and external) do not show in Finder. Why?
If I insert a disk, it will show, but not till then.
I-Mac
Model Name:
iMac
Model Identifier:
iMac11,1
Processor Name:
Intel Core i5
Processor Speed:
2.66 GHz
Number of Processors:
1
Total Number of Cores:
4
L2 Cache (per Core):
256 KB
L3 Cache:
8 MB
Memory:
16 GB
OS= Mt Lion

I would like to burn to external as it is much faster and the internal is not liking me.
So, if I pick a file in Finder and click Burn to DVD, it tries to burn to internal.

External hard disk does not show in finder

WD usb external hard disk does not appear in finder. Disk utility sees it and will mount/unmount and eject. I ran repair disk util. and all is well but still does not appear in finder

Hey Hatter, Thanx for the input.
Among other things I tried was a terminal routine someone suggested with no luck and new drivers/firmware for the drive, again, no luck.
I still don't know for sure what caused my problem, but I re-partitioned the drive and re-formatted it and that seemed to solve the provlem. Sadly, I lost all my info that was backed up on that particular drive but hopefully it won't come back to bite me later.
Cheers!!

In my aperture the camera file name does not show under the photo how do I get it to show

In my aperature dislay the camera file number does not show how do I get it to show

Where exactly is the filename missing? Aperture has plenty of places to display metadata.
You configure and enable the display of metadata by defining Metadata presets. One place todo this is the little baggage label icon below the browser:
Press the icon,enable the display of metadata overlays for Browser and Viewer, then press "Edit" to customize the display of the tags you want to be displayed.
-- Léonie

My user name does not show in finder

Similar Messages

Maybe you are looking for