My user name is not recognized for sync

On my new computer my user name is not recognized for the sync set up. I have sync on my other computers.

Is this the only account you have on your system? Is it an admin account?
You can try resetting the password using the Mac OS X install disc. The steps are outlined here: http://docs.info.apple.com/article.html?artnum=106156
Scroll to the part titled: "Resetting the original administrator account password."
Hope it helps.

Similar Messages

  • IPod not recognized (for sync OR charging) after OS 4 upgrade

    I upgraded to OS4 on Saturday July 10th with no problems. On Sunday (July 11) I used my iPod quite a bit. I was at a friend's house and the battery was getting low so he charged it through his computer. It charged completely and we continued using it the rest of the day. I plugged it in to my PC to charge it Sunday night and it was not recognized at all (for charging OR for syncing) through any of the USB hubs. I asked my friend the method he used to charge it that day and he confirmed it was via computer. Monday night I tried charging it through a friend's iMac. It charged halfway, though it still wasn't recognized. Tuesday morning I tried to charge it on the same computer and I got the "too much power drawn from the USB hub - HUB deactivated" message on ANY of the HUBs. It still doesn't work on my own home computer (though it HAD been working Friday night and Saturday morning pre-OS4 installation).
    I'm personally running Ubuntu 10.04 but obviously only was able to charge the iPod on that system. Anytime I want to sync or download music I restart to Windows Vista (and iTunes).
    I do also have apps installed, but nothing new from the previous OS - (I know that blaming third party apps is a common cop-out answer for apple techs).
    I hope this wasn't too confusing. My real problem is simply described by my subject line: iPod not recognized (for sync OR charging) after OS 4 upgrade. What follows is simply everything I've done to troubleshoot. The only thing I haven't tried is restore...because my iPod isn't even recognized by iTunes.
    I would greatly appreciate any help or stories related stories/situations. Strength (and hopefully solutions) in numbers!
    Best,
    Dan

    Assuming you haven't got the cords mixed up with another, older iPod, it sounds like you have a couple of problems:
    1. Your computer's USB ports have quit working. Reboot your computer and see if they reactivate.
    2. Your friend's iMac generated that message because you tried to charge the device from the low power keyboard USB port. iPods need to be charged off one of the main USB ports or a powered hub.
    3. iPods not being recognized by iTunes can be caused by 1) wrong cable; 2) non-functioning USB ports; 3) iTunes not being the correct version for the iPod OS; and finally 4) Apple Mobile Device Services driver is either stopped, missing, or disabled.
    To troubleshoot a problem with Apple Mobile Device Services, see the Apple support article: http://support.apple.com/kb/TS1567

  • P6 user name is not valid for connecting to the reporting database

    No data is available because your P6 user name is not valid for connecting to the reporting database
    I am getting above error in the following environment:
    P6 running on wls instance 1.
    BI Publisger running on wls instance 2
    MS SQL server 2005
    Note that the error appears when I clink on the 'Reports' tab in P6. My admin user on P6 has access to report/analyser modules.
    To connect P6 to BI Publisher I am using 'PxRptUser' in the P6 configuration for Bi Publisher. I know as well that the WSDL URL is correct and I can test this in SoapUI tool.
    In BI publisher I have created the PMDB data source using PxRprUser, and the test of this connection works.
    (Because the report samples come with Oracle flavoured SQL that SQL server does not like, I have configured BI Publisher so I have just a single report left that sources it data from an xml file. This works in BI Publisher. It also helps me in that I do not need to add 'WHERE' clauses and parameters required for SQL server?)
    Furthermore, using a DB tool, I can connect to my SQL server using PxRPTUser.
    So why do I get the error above?
    I picked up somewhere that I should not be adding users to BI Publisher. Funny enough, testing the 'login' method the BI Publisher exposes through its WSDL (as above) I noticed I HAD to create the user PxRptUser in BI publisher application itself (on top of PxRptUser in database) for the login web service to work with PxRptUser
    That did not solve the connection between P6 and BI Publisher though. What am I missing ...
    Edited by: user3674522 on 10/11/2011 20:16

    Thought I found something but can't repliacte, som issue is still there:
    Had a look at the wls instance logs where BI publisher is running, and the error I get is:
    111111_023646955][][ERROR] javax.naming.NamingException: Unresolved naming: cn=admin, dc=user, dc=users, dc=principals at [cn=admin]
    That user, admin, is the one I have used to access P6. Why is this passed on to BI Publisher? I thought the idea was that the PxRptUser set in BI Publisher configurations in P6 would be used?
    Edited by: user3674522 on 10/11/2011 20:17

  • Help!!!!! My user name is not recognized!!

    I have an iMac and everything was going fine before leopard, then everything fine, then I had to reinstall (archive and install) as I was getting the welcome screen and that was the only thing I was getting, so now when my computer is on and I try to install or change any preference it asks me for my user name (this didn't happen before) but asks me for user name and password, I write them and it says invalid, I do not know what to do!!!!! Help!!! Please!!!!

    Is this the only account you have on your system? Is it an admin account?
    You can try resetting the password using the Mac OS X install disc. The steps are outlined here: http://docs.info.apple.com/article.html?artnum=106156
    Scroll to the part titled: "Resetting the original administrator account password."
    Hope it helps.

  • Win7 Ultimate Sole User Administrator Privileges Not Recognized for Automatic Windows Updates

    I am a sole account/user (home-based and non-network) with system administrator privileges, except this status is not recognized under Windows Update > Change Settings > Important Updates. The option of selecting automatic updating
    and an installation frequency/time is grayed out.  How do I fix?  

    Hi KiDeb.
    Did you have any changes prior this issue?
    Could you confirm that Important Updates were installed before?
    The possible solution could be this:
    Hold WindowsKey + R 
    Type: “regedit”
    Hit Enter
    Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU
    Find AUOptions. 
    Right Click Modify
    You can change the values data from 1 through 5:
    1. Download updates but let me choose whether to install them
    2. Check for updates but let me choose whether to download and install them
    3. Download updates but let me choose whether to install them
    4. Install updates automatically / Never Check For Updates
    5. Enable the option box to choose manually
    If this doesn't help, you can try this method, but make sure you backup the registry files as you are doing this step on your own and I am not responsible for the possible issue -
    Backup registry files in Windows 7
    Click “Start” button.
    Select “Run”.
    Type “regedit” without quotes in the Run window and hit Enter.
    Navigate to this location: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU
    In the right-pane, delete these two values “AUOptions” and “NoAutoUpdate”.
    Then navigate to this location: HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\WindowsUpdate
    In the right-pane, delete the value “DisableWindowsUpdateAccess”.
    Restart the computer and then try to change the Auto Update Settings.
    Please click on Propose As Answer or to mark this post as and helpful for other people. This posting is provided AS-IS with no warranties, and confers no rights.

  • The user or group name is not recognized. (rsUnknownUserName)

    SQL 2008 R2 Reporting Services
    When trying to add a group from Active Directory onto the reporting services security we get the following error
    The user or group name 'groupname' is not recognized. (rsUnknownUserName)
    We are able to add users from Active Directory this only fails on group.
    Jason Spencer

    Hi Jason,
    The error “The user or group name<name> is not recognized (rsUnknowUserName)” means the Report Server cannot find the user from domain or local users or groups of Report Server. Reporting Services stored users with users’ SID. After we tyoe a username
    in the username textbox, the Reporting Services will user the method “LookupAccountName” in Window API to get the users’ SID. If the API cannot get the SID of the user, Reporting Services will throw the expression “rsUnknowUserName”.
    Here has some threads that similar to yours, and there have solved the issue, you can try the solutions, for more information, please see:
    http://social.technet.microsoft.com/Forums/en/operationsmanagerreporting/thread/64ac1fa7-4535-4369-9bf6-1323e00be543
    http://social.msdn.microsoft.com/forums/en-US/sqlreportingservices/thread/fbc2728e-425a-4666-9810-1300b7881ee6/
    Hope this helps.
    Regards,
    Charlie Liao
    Charlie Liao
    TechNet Community Support

  • RDS Gateway + Smart Card Error [ The specified user name does not exist.]

    I have the following Windows Server 2008 R2 servers:
    addsdc.contoso.com, AD DS Domain Controller for contoso.com
    adcsca.contoso.com, AD CS Enterprise CA, CDPs/AIAs published externally.
    fileserver.contoso.com, RDS Session Host for Administration enabled
    rdsgateway.contoso.com, RDS Gateway enabled
    tmgserver.contoso.com, 'Publishing' rdsgateway.contoso.com but with pass-through authentication
    And the following Windows 7 PCs:
    internalclient.contoso.com
    externalclient.fabrikam.com
    There's no trust between the domains, the external client is completely separate on the internet but the CA certificate for contoso.com has been installed in the trusted Root CA store. All servers have certificates for secure RDP.
    I enrolled for a custom 'Smart Card Authentication' certificate with Client Authentication and Smart Card Logon EKUs from the CA, stored on my new Gemalto smart card using the Microsoft Base Smart Card CSP.
    From internalclient.contoso.com, I can RDP to fileserver.contoso.com
    using the smart card just fine with no certificate errors.
    From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
    via rdsgateway.contoso.com using a username and password just fine with no certificate errors.
    From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
    via rdsgateway.contoso.com using the smart card to authenticate to the gateway, and a username and password to authenticate to the end server, just fine.
    BUT from when using a smart card to authenticate to the end server via the gateway, it fails with:
         The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support. 
    When I move the client into the internal network and try the connection again (still via the RDS Gateway), it works fine - the only thing I can think of is being outside the network and not being able to contact the AD DS DC for Kerberos is causing the issue
    - but I'm pretty sure this is a supported scenario?
    The smart card works fine internally, the subject of the certificate is the user's common name (John Smith) and the only SAN is
    [email protected] which matches the UPN of the user account as it was auto-enrolled.
    Does anyone have any ideas?

    I had a similar issue where I am using a smart card through a Remote Desktop Gateway. I had to disable Network Level Authentication (NLA) on the destination Remote Desktop Server. If anyone has another way around this, I'd appreciate hearing it. I'd prefer
    to use NLA.

  • Hello, I have this problem on updating applications on my iPhone 4s 5.1.1 i dont know if you can help me with. when ever i want to update an application on apple store i get a different user name then mine(slamdance@cracked.by) this user name is not mine

    Hello,
    I have this problem on updating applications on my iPhone 4s 5.1.1 (jail broken) i dont know if you can help me with.
    when ever i want to update an application on apple store i get a different user name then mine([email protected]) this user name is not mine but its always there only on updating my app's.
    thanking you in advance for your kind help.

    Under the Terms of Use of this forum it is prohibited to discuss jail breaking. By jail breaking your iPhone you void any warranty you may have and forfeit any support from this forum.

  • E-mail to the recovery user name does not come

    e-mail to the recovery user name does not come
    what i do?
    I'm sorry for the mistakes i am polish

    The employer should be setting its Macs up with corporate Apple IDs and corporate volume licesnses for the software. Individual employees personal IDs do not provide the Licensed Copy End User License Agreement that the Macs need in a business evironment. Your personal Apple ID only carries a consumer license and by law any of your own apps that you install on the Mac will it is in your control would need to be removed when you turn the Mac back over to the company.
    When a Mac is first set up the original Apple ID is always going to be associated with that Mac, its installed version of OS X and the preinstalled iLife apps. And only that ID can update the iLife apps if they were properly accepted into the Apple ID*. But you should be able to sign out of the active Apple ID in the Store menu of both the iTunes App and the Mac App Store app, then sign into your Apple ID to install any of your own content that you wish to have on the Mac.
    *If the iLife apps were not correctly accepted into the setup Apple ID, then they cannot be updated and no one can buy them again on that Mac with any Apple ID.

  • Modified by column the user name is not updated

    Hi
     I am using the client side object model to upload the document in the document library, its working fine, but the modified by column  the each user name is  not updated, instead of system name is updated for all the
    upload. 
    In the below screen shot where all the documents uploaded by the different users but its show the only the system instead of user name how to solve the issue.

    thanks Hemendra
    Agrawal
    i will
    try it another one issue 
    i cant able to upload the file size >1 MB its showing error."the remote server returned an error (400) bad request."
    i tried your previous post but its not working.

  • My husband gave me his iPod touch, even after resetting all settings, and even though I have a user name and password whenever I need to update apps it shows his previous user name,  and is asking for his password.  How do I fix that?

    My husband gave me his iPod touch, even after resetting all settings, and even though I have a user name and password, whenever I need to update apps it shows his previous user name,  and is asking for his password.  How do I fix that?

    dom59 wrote:
    Ok, when I go into my Apple ID account, everything looks right.  It does show my user name.  It's only on the iPod that it shows my husband's previous user name, and it asks for his password.  Everything in iTunes and my account looks right.  The issue only seems to be with the actual device, iPod Touch 4th gen.
    There is more than one way to access the Apps Store and the iTunes store.  One is via iTunes on your computer, and the other is via the apps on your iPod.
    Just because you are logged in on your computer does not mean you are logged in on your iPod.
    The reason your husband's user name comes up is because he was the last one to log on.  You can change that by going to Settings>Store.  Tap the Apple ID, Tap Sign Out, Tap Sign In, Tap Use Existing Appel ID, enter your e-mail address and Apple ID password, and tap OK.

  • I use IMAC upstairs connected to the house wifi downstairs where the networked printer is. I have 'found' the network printer on my IMAC settings but when i send to print I am getting a pop-up box which has 'apple' as user name and is asking for password.

    I use IMAC upstairs connected to the house wifi downstairs where the networked printer is. I have 'found' the network printer on my IMAC settings but when i send to print I am getting a pop-up box which has 'apple' as user name and is asking for password. I have tried my own IMAC password but to no avail. The printer also shows a pop-up box stating 'awaiting authentication.
    Any help appreciated

    You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
    You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
    As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
    An Extreme's Guest network is separate from its Main network; that is the reason for having it.

  • Oracle SQLWarning: specified user name was not quoted

    Hello,
         Using Hibernate, I get this error sometimes when it closes a
    connection. I was wondering if someone can let me know what causes this
    sort of error in BEA?
    java.sql.SQLWarning: [BEA][Oracle JDBC Driver]Specified user name was
    not quoted and was, therefore, converted to all upper case.
    at weblogic.jdbc.base.BaseWarnings.createSQLWarning(Unknown Source)
    at weblogic.jdbc.base.BaseWarnings.get(Unknown Source)
    at weblogic.jdbc.base.BaseConnection.getWarnings(Unknown Source)
    at weblogic.jdbcx.base.BasePooledConnection.getWarnings(Unknown
    Source)
    at
    weblogic.jdbcx.base.BaseConnectionWrapper.getWarnings(Unknown Source)
    at
    weblogic.jdbc.wrapper.XAConnection.getWarnings(XAConnection.java:835)
    at
    weblogic.jdbc.wrapper.JTAConnection_weblogic_jdbc_wrapper_XAConnection_weblogic_jdbcx_base_BaseConnectionWrapper.getWar
    nings(Unknown Source)
    at
    net.sf.hibernate.impl.BatcherImpl.closeConnection(BatcherImpl.java:289)
    at
    net.sf.hibernate.impl.SessionImpl.disconnect(SessionImpl.java:3310)
    at net.sf.hibernate.impl.SessionImpl.close(SessionImpl.java:552)
    at com.lmco.ibis.datamapper.DataMapper.close(DataMapper.java:214)
    at
    com.lmco.ibis.service.processes.ArrestPersonEJB.onMessage(ArrestPersonEJB.java:104)
    at weblogic.ejb20.internal.MDListener.execute(MDListener.java:382)
    at
    weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:316)
    at
    weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:281)
    at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2596)
    at weblogic.jms.client.JMSSession.execute(JMSSession.java:2516)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)

    Steven Ostrowski wrote:
    The username is passed to the ConnectionPool by the Properties attribute:
    Properties="user=scott;portNumber=1521;SID=MYDB;serverName=myserver"
    So, it's true that the username is not quoted. I tried putting single
    quotes around the username, but then Oracle gives an error.
    Capitalizing the user to SCOTT stops the warnings from showing.
    p.s. Thanks for the informative replies, you're a great help!Glad to. We want you successful.
    Joe
    >
    Joe Weinstein wrote:
    Steven Ostrowski wrote:
    Hello,
    Using Hibernate, I get this error sometimes when it closes a
    connection. I was wondering if someone can let me know what causes
    this sort of error in BEA?It shouldn't be an error, it's just a warning. The problem is in
    net.sf.hibernate.impl.BatcherImpl.closeConnection(BatcherImpl.java:289)
    when it calls getWarnings() when you ask it to close a connection.
    If it's just showing up in the log, then it shouldn't hurt anything.
    However, if your jdbc connection pool has the user defined as 'scott',
    try changing it to 'SCOTT' and see if that goes away completely.
    If it doesn't, let me know and I'll find out how to make it stop.
    Joe
    java.sql.SQLWarning: [BEA][Oracle JDBC Driver]Specified user name was
    not quoted and was, therefore, converted to all upper case.
    at weblogic.jdbc.base.BaseWarnings.createSQLWarning(Unknown
    Source)
    at weblogic.jdbc.base.BaseWarnings.get(Unknown Source)
    at weblogic.jdbc.base.BaseConnection.getWarnings(Unknown Source)
    at
    weblogic.jdbcx.base.BasePooledConnection.getWarnings(Unknown Source)
    at
    weblogic.jdbcx.base.BaseConnectionWrapper.getWarnings(Unknown Source)
    at
    weblogic.jdbc.wrapper.XAConnection.getWarnings(XAConnection.java:835)
    at
    weblogic.jdbc.wrapper.JTAConnection_weblogic_jdbc_wrapper_XAConnection_weblogic_jdbcx_base_BaseConnectionWrapper.getWar
    nings(Unknown Source)
    at
    net.sf.hibernate.impl.BatcherImpl.closeConnection(BatcherImpl.java:289)
    at
    net.sf.hibernate.impl.SessionImpl.disconnect(SessionImpl.java:3310)
    at net.sf.hibernate.impl.SessionImpl.close(SessionImpl.java:552)
    at
    com.lmco.ibis.datamapper.DataMapper.close(DataMapper.java:214)
    at
    com.lmco.ibis.service.processes.ArrestPersonEJB.onMessage(ArrestPersonEJB.java:104)
    at
    weblogic.ejb20.internal.MDListener.execute(MDListener.java:382)
    at
    weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:316)
    at
    weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:281)
    at
    weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2596)
    at weblogic.jms.client.JMSSession.execute(JMSSession.java:2516)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)

  • Javax.servlet.ServletException: The name "" is not legal for JDOM/XML namespaces

    Dear all,
    First of all sorry, if this is not the right place for my question.
    I am facing some problem with the XFire Webservices. When i am trying to access the WSDL through the url. server is throwing the following exception :
    javax.servlet.ServletException: The name "" is not legal for JDOM/XML namespaces: Namespace URIs must be non-null and non-empty Strings.
         org.codehaus.xfire.transport.http.XFireServletController.doService(XFireServletController.java:143)
         org.codehaus.xfire.transport.http.XFireServlet.doGet(XFireServlet.java:107)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:697)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
         org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
    root cause
    org.jdom.IllegalNameException: The name "" is not legal for JDOM/XML namespaces: Namespace URIs must be non-null and non-empty Strings.
         org.jdom.Namespace.getNamespace(Namespace.java:164)
         org.codehaus.xfire.util.NamespaceHelper.getUniquePrefix(NamespaceHelper.java:58)
         org.codehaus.xfire.aegis.type.basic.BeanType.writeSchema(BeanType.java:560)
         org.codehaus.xfire.wsdl.AbstractWSDL.addDependency(AbstractWSDL.java:224)
         org.codehaus.xfire.wsdl.AbstractWSDL.addDependency(AbstractWSDL.java:233)
         org.codehaus.xfire.wsdl11.builder.WSDLBuilder.createDocLitPart(WSDLBuilder.java:403)
         org.codehaus.xfire.wsdl11.builder.WSDLBuilder.createPart(WSDLBuilder.java:355)
         org.codehaus.xfire.wsdl11.builder.WSDLBuilder.writeParameters(WSDLBuilder.java:509)
    cont.......
    I am not able to figure out the root cause for this. The service.xml file looks like below:
    <?xml version="1.0" encoding="UTF-8"?>
    <!-- START Service.xml -->
    <beans xmlns="http://xfire.codehaus.org/config/1.0">
    <!-- Construct the castor service factory by Spring -->
    <bean id="castorTypeRegistry" class="org.codehaus.xfire.castor.CastorTypeMappingRegistry"/>
    <bean id="bindingProvider" class="org.codehaus.xfire.aegis.AegisBindingProvider">
    <constructor-arg ref="castorTypeRegistry"/>
    </bean>
    <bean id="castorServiceFactory" class="org.codehaus.xfire.service.binding.ObjectServiceFactory">
    <constructor-arg index="0" ref="xfire.transportManager"/>
    <constructor-arg index="1" ref="bindingProvider"/>
    </bean>
    <service>
    <name>ReleaseManager</name>
    <namespace>ReleaseManager</namespace>
    <serviceClass>com.pinkroccade.jfoundation.calculation.releases.ReleaseManager</serviceClass>
    <implementationClass>com.pinkroccade.jfoundation.calculation.releases.ReleaseManagerImpl</implementationClass>
    <schemas>
    <schema>META-INF/schema/release-impact-worksheet-3.2.0.xsd</schema>
    </schemas>
    <style>document</style>
    <serviceFactory>#castorServiceFactory</serviceFactory>
    </service>
    </beans>
    <!-- END Service.xml-->
    The issue which i am facing is it due to the problem with the service.xml (Which i dont think so..), Or is it any thing to do with the XSD file which i am using.
    Can any body give me some guide lines for this ????
    Thanks in advance.
    Thanks and Regards,
    Manjunath.

    Any one any thoughts..
    I need to find out the solution for this as soon as possible; Not able to proceed further...
    Thanks and Regards,
    Manjunath.

  • My user name does not show in finder

    I recently had to do a re-install of OS X Yosemite on my brand new Macbook Pro due to some files being corrupt during the transfer of my aperture and iTunes librarys from my old iMac to the new Macbook. (Aperture appears to be the problem)
    After the re-install everything appeared as a new computer. After signing in to my accounts, I went to "Finder" to open my username and music file to transfer my iTunes library over.  My user name does not appear at all in the Finder sidebar. Have doing something wrong here.

    You can customize your Finder sidebar to show whatever you want. Some of the defaults (including the home folder you're talking about) are available by going to Finder menu - Preferences - Sidebar. You can add others by dragging them from the right side of the Finder window into the sidebar.
    Matt

Maybe you are looking for