My user was changed to standard how may I obtain administrator privilege again

My user was changed to standard how may I obtain administrator privilege again

My user was changed to standard how may I obtain administrator privilege again

Similar Messages

  • How do I obtain administrative privileges in order to install software ?

    How do I obtain administrative privileges in order to download software ?  I am  trying to download Garmin Maps for my Garmin Nuvi 260W.  Thank you.

    Thanks Eric.  I am the user administrator plus there is a guest user.  However, when I attempt to download Garmin Express installer an apple box appears requesting my Apple Id and password and when I enter this nothing happens and when I cancel this I get a message stating that I need administrative privileges to install the software .  Any assistance which you could give me would be greatly appreciated as it is very frustrating when I am unable to download maps from Garmin when I have previously purchased lifetime maps.

  • Hello, if my apple id was changed on ipad, how do i change it back

    if my apple id was changed on ipad, how do i change it back?

    Go to Setrtings/Store and tap the indicated ID to sign out.  Then sign in with the correct ID.  Note that this will apply ONLY to new purchases.
    ALL purchases are permanently associated with whatever Apple ID was used to originally obtain them.  Apps can not be updated without knowledge of that ID and, more importantly, its password.  Apple IDs can not be merged and purchases can not be transferred from one ID to another.

  • HT4061 Iphone suddenly turned off after it was working fine. How can I turn it on again?

    Iphone suddenly turned off after it was working fine. How can I turn it on again?

    Hi Bobgriff43,
    If your iPhone will not turn on, you may find the following article helpful:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Regards,
    - Brenden

  • HT1766 my iphone 4 is stuck in restore after updating the lasted version.  It was working fine before.How do I get it working again?

    my iphone 4 is stuck in restore after updating the lasted version.  It was working fine before.How do I get it working again?

    Hello, fschris. 
    Thank you for visiting Apple Support Communities.
    When experiencing issues updating or restoring an iPhone, here are the best articles to go through.  If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    Cheers,
    Jason H.

  • I need to establish admin user on my imac it was changed to standard

    how do i establish a admin acct on imac if none exists

    Start with http://support.apple.com/kb/TS1278

  • How may I obtain the file "data1.cab"

    Hi, Sirs:
    我的电脑上安装了从贵公司官网上在线购买的Adobe Acrobat XI Pro (11.0.05). 不知为什么升版时出错，出错信息“没有找到源文件Data1.cab”。请问如何解决。
    WZY

    Hi 智樱王59870609,
    Please see this document, which covers the error you're receiving: Error 1311, 1335, or 2350 "Source file not found...data1.cab" |Install Adobe products | Windows.
    In your case, it sounds like antivirus software may be the likely culprit. Please sign in as an administrator, and disable any antivirus and try installing again.
    Best,
    Sara

  • Account Administrator changed to Standard

    After re-installing Snow Leopard, my Account Administrator status was changed to Standard.
    I can't unlock the Account to re-make myself the Administrator, or do a software update, etc.
    Help!!!
    Don

    baltwo
    I also tried using your 12/17/09 post #106290... "Enabling and using the "root" user in Mac OS X
    In the section..."How to disable the root user Mac OS X 10.6" (below) I found no Edit button on the bottom-right of the Accounts/Login Options.
    Also my Directory Utility app repeatedly quit upon opening. Will there be a problem if I can't disable the Root User?
    Don
    From the Apple menu choose System Preferences....
    From the View menu choose Accounts.
    Click on the lock and authenticate with an administrator account.
    Click Login Options....
    Click the "Edit..." button at the bottom right
    Click the "Open Directory Utility..." button.
    Click the lock in the Directory Utility window.
    Enter an administrator account name and password, then click OK.
    Choose Disable Root User from the Edit menu.

  • Full true Administrator Privileges and rights for New User?

    I am wondering how to grant full administrator privileges to a newly created user?
    Here is the environment:
    Windows 2012 Server 64bit
    Not part of a domain <WORKGROUP>
    Here is the problem:
    I created a new user we will call them "SecondaryAdmin", and made them part of "Administrators" group as well as the "Remote Desktop Users" group.
    I login through an RDP session as "SecondaryAdmin", I go to a command prompt, and I run IISRESET and it tells me:
    "Access denied, you must be an administrator of the remote computer to use this command. Either have your account added to the administrator local group of the remote computer or to the domain administrator global group."
    Additionally, I have IE Enhanced Security turned off, but if I open Internet Explorer while logged in as "SecondaryAdmin" it still displays the IE Enhanced Security warnings.
    Also, if I try to copy a file to the root "C:\", it gives me "Access denied error" forcing me to continue with elevated administrator privileges.
    If I run the command prompt as "administrator" I can do an IISRESET without error.
    If I run Internet Explorer as "administrator" I do not get the warnings.
    If I run windows explorer as "administrator" I do not get the access denied.
    However, I WOULD NOT trust this "SecondaryAdmin" account to install ANYTHING. Even if you ran the install executable as "admin", often times these install files will fire off secondary scripts that wont be fired off as "admin",
    which may lead to incomplete or corrupt installs.
    This changed from Windows 2008 R2 to Windows 2012.... If I do the same exact thing in Windows 2008, I am able to do all the above things without prompt or error.
    So how can I give a new user true, full, elevated, admin privileges without having to run everything as administrator? Some obscure setting in GPO? Some registry setting (already tried LocalAccountTokenFilterPolicy)?
    What I have tried:
    UAC is OFF
    Firewall is OFF
    IE Enhanced Security is OFF
    Remote Management/Desktop Enabled
    User part of Administrators Group and Remote Desktop Group
    Used "netplwiz" to verify user is Administrator
    Please help!

    Hi Chris,
    I appreciate your answers, however, this is not what I am looking for.
    I want the "SecondaryAdmin" user, who is part of the Local Admininstrator group, to have full Admin access.
    I DO NOT want them to have to do anything special, or have any user intervention.
    NO yes/no dialog boxes
    NO clicking "Run As Admininstrator"
    NO changing shortcuts or executable file properties to always "Run as Admin"
    I simply want the "SecondaryAdmin" account, which is part of the "Administrators" group, to have the same access and run the same seamless way it did in 2008 R2, with no user intervention required.
    This is what I am looking for.
    Kind Regards,
    James

  • HT201209 how do i obtain a refund on an electronic itunes card sent via email?

    Hello,
    I sent someone an electronic iTunes gift card via email back in December 2012. It was never redeemed. How can I obtain a refund or have the funds on the card transferred to my iTunes account?
    Antionette Hill

    Hello,
    The electronic itunes gift card went directly to the email receipient. I never received the code. I am positive that she didn't redeem it because she's asking me for the code.I don't have it and I never received it. If I had the code, I would use the funds myself. Nevertheless,  I just want the money to be transferred back to my itunes account. Or, if there is a way to trace the code back to the original purchse, you can send it directly to me.
    Please advise.
    ahill724

  • How do I obtain chrome priveleges

    How do I obtain Chrome privileges?

    Your question is not at all clear - perhaps you could rephrase it more succinctly?
    -Rob

  • HT5621 I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully und

    I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    1. You don't own another Mac.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    2. You do own another Mac.
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
    3. Other issues
    If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

  • How can I locate my lost iPod Touch if my location was off and user ID was changed?

    I lost 3 Apple devices during house break in. How can I locate my lost Apple devices if my location was turn off,
    without "Find My Phone" apps and user ID was changed. The 3 devices are iPod Touch, iPad 2 and iPhone 3gs.
    I had made a Police Report and was told that I can request to get information to track my devices upon WIFI or
    internet connection. I hope "APPLE" team will help me to track my devices with IP locations, GPS, built in compass,
    or quickly send directions, updated informations and mobile data to find out and coordinates them.
    Given point will also help the police to capture them.
    Awaiting your reply.
    Thank you. Rgd,
    Sean Khor
    <Personal Information Edited by Host>

    There is no Apple here, just users like you and me. Apple does not provide nor have that information, as far as I know, but if police needs that information, they have a legal way of contacting Apple. If I were you I would avoid trusting Internet forum, assessable by anyone with your personal information.

  • How to restrict the user to change ALV layout for Standard Report Output

    Dear All,
    How can i restict the Users to change Output layout of Standard ALV reports,
    kindly suggest to solve the issue.
    Regards,
    Niranjan.G

    Hi NIranjan,
    In the ALV function module , the i_save can have the below paramater values.
    You can add based on your requirement.
    I_SAVE = SPACE Layouts cannot be saved.
    I_SAVE = 'U' Only user-defined layouts can be saved.
    I_SAVE = 'X' Only global layouts can be saved.
    I_SAVE = 'A' Both user-defined and global layouts can be saved.
    Check the Authorization Object - S_ALV_LAYO  in SUIM (Objects by Complex Search)
    Activity -23.
    Edited by: Raj on Jul 13, 2010 3:05 PM

  • I ordered Illustrator for another user.  I received an invitation that was accepted, logged in and tried to change the account to the name and email of the person it was ordered for.  How can I get this changed and the invitation sent to the right person?

    I ordered Illustrator via creative cloud for another user.  I received an invitation that was accepted  and tried to change the account to the name and email of the person it was ordered for.  How can I get this changed and the invitation sent to the right person? 

    Cloud as a Gift https://forums.adobe.com/thread/1665610

Maybe you are looking for