My version of Lookout 6.0 is stuck in integrator mode. Actv. Codes will not work to get it out.

Solved!
Go to Solution.

Problem Solved. Had to go into the License folder under Lookout and take out the Integrator License so it would quit seeing it.

Similar Messages

My iphone is stuck in recovery mode and itunes will not recognize my phone. I've tried pretty much every trick i can and i still do not know what to do. Someone please help me

My iphone is stuck in recovery mode and itunes will not recognize my phone. I've tried pretty much every trick i can and i still do not know what to do. Someone please help me

I've done all of these, even trying a different USB port, and still, nothing. This is really confusing. Windows 8.1 said something to do with USB malfunction or something and nothing works. I need to restore my iPhone quickly and nothing has happened. My cable is not genuine Apple product. iTunes makes the noise that it makes when I connect the device, but it doesn't say 'iPhone is in recovery mode' or even say 'iPhone' in the corner. I am really fed up and would really appreciate a response.
Thanks,
Nathan.

My iphone is stuck in recovery mode and i dont know how to get it out

my iphone is stuck in recovery mode and i dont know how to get it out

Restore in iTunes.
If no joy
Put the IPhone in DFU mode (Google How to ..) so that iTunes sees it in Recovery Mode.
Restore

My iPod (4 gen) is stuck in recovery mode and it will not restore. How do I fix it?

So here is what happened: my iPod went dead and when I went to plug it in to charge I noticed it wasn't doing the normal little battery charging symbol nor did it pop up with the apple symbol. When I opened up iTunes it told me that my iPod was stuck in recovery mode and that the only way to fix it was by restoring it. As much as it pained me to do so I did it anyways. It did the routine update and restore window, I waited the 28 minutes, but still nothing. Now when I go to restore it a window pops up that says that the iPod cannot be restored because the iPod update server cannot be contacted or is currently unavailable. I'm at a loss. This the the only form of communication that I have available to me and I need it fixed A.S.A.P. Please help!
Additional Details
My iPod is NOT jailbroken.
Now it says and unknown error occurred (3194) please help!
The lock/hold button on my iPod is broken. My iPod cannot be locked, unlocked, or shut down using this button.
Message was edited by: seades

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem

IPod stuck in recovery mode with home button not working

Hi, I was restoring my iPod and everything went fine until it was restarting with the apple logo and loading symbol. My iPod's home button hasn't been working in a while so I use assistive touch. Now the iPod is stuck in recovery mode and I can't press the home button, I don't know what to do. Pls help!

Try:
- iOS: Not responding or does not turn on
Whenit says place the iPod in recoivery mode:
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How can I remove version 3.5 from my computer... the add/remove programs will not work, I have 3.6 installed and 3.5 is taking up over 2 gigabytes of disk space according to the add/remove in the control panel and nothing I do will remove 3.5

I have been trying to make room on my C drive and have been removing stuff I don't use. I have version 3.6 Firefox but my settings show I also have 3.5 which shows over 2,000 megabytes of disc space being used. I try to remove it but nothing happens, nor can I find it when searching "my computer" to try and kill it. Why would any program use up 2 gig of space?
== This happened ==
Every time Firefox opened
== I was trying to find a way to clear up space on my C drive

If you need to consider removing 30MB folders to create space then I imagine your hdd is seriously short of space. Normally I think it is often suggested a minimum of 20-25% free space be left on a Windows machine hdd. How much free space % wise have you at present.
You probably have already thought of these, a lack of space could slow things down and may even contribute to crash problems.
*Not using the Hibernate feature will release one largish chunk.
*Not keeping video files on the HDD unnecessarily is also likely to save space.

Before I downloaded the latest version of Firefox I could us the Norton Idnetity Safe. It will not work with the new version. What do I have to do to make it work?

I am not sure if this is a plugin or extension. All I know is that it worked with the old version of Firefox. It is very important to me to be able to use this feature. Any help would be appreciated.

THIS ISSUE IS RESOLVED FOR ME.
When I opened this pop-up to view the settings (File > Page Setup > "Format & Options": Scale ), the Scale value was 40%. Changing it to 100% corrected the issue I observed.
To my knowledge, I have not been inside this pop-up window before to set the Scale option. Could this value be affected by other actions within Firefox? I noticed this while using v12 which was installed 24Apr2012.I know it worked correctly since that installation, so why did the Scale value change?
UPDATE: I just realized that the Scale option in print preview sets the Scale value in the settings. NOTE TO ALL: This is a sticky setting, not just a setting for a specific output request.

My nano is stuck in "safe mode" still and will not update.

The original problem:When I was trying to update my nano ipod to 2006-03-23 it ended up going to a black and white screen which said do not disconnect. The updater wouldn't work, it kept saying that the firmware (or whatever the name of the maker is) wouldn't work and that the update had failed. The my nano said it was ok to disconnect. When I did so it came up to the window that has a little folder on it and says check www.apple.com/ipod/support.
So, I followed the five Rs, have reset the ipod, have reinstalled all the software, but now the ipod will not go past the black and white screen. I can load the ipod software but then the updater on the CD that came with my ipod won't work. Sometimes the updater says the ipod needs formatted sometimes it doesn't. Sometimes I'll get a little further in the updater where it will let me "restore" the ipod to its original factory state but then the restoration also fails.
Now the problem: After trying several things from updating my Windows systems to removing spyware and firewalls from my computer, I'm now receiving this message when I try and update my nano: ipod service error. What can I do to get my nano to work? Is there an apple 1 800 number I can call?

Try these...
iPod shows a folder icon with exclamation point
iPod Service Error
Firmware Update Failure (If that was the error)
btabz

My iPhone is stuck in DFU mode but it will not restore please help me!

What happened to my phone was I was having screen issues so i replaced it and it worked normally for about 5 minutes and then the screen went black. After the screen went black, it came back on with the "connect to itunes screen". Since then i've tried to restore it and no good has cone fron trying. Sometimes itunes will tell me that it can't be restored because of the build of the phone or itunes will give me a different error code. Itunes also will make it as far as the restore screen where itunes is saying waiting for iphone and the iphone screen is on with the white loading line under the apple but the line will not move no matter how long you give it time to load. I've tried pretty much all the techniques to reslove my issue. I've even used tiny umbrella, and redsnow to try and kick it out of recovery mode but that does is make the apple logo pop up and fade out until the screen is black and then pop up again. Can someone please help me?

It sounds to me like you either got defective parts or otherwise did not make the repair correctly. We cannot help with self-repairs here, the iPhone officially not user servicable, but you can ask for advice in the forums on ifixit.com, a site which is dedicated to those attempting their own repairs.
Regards.

My iPhone 3 is stuck in Recovery Mode and now will not even come up in iTunes

I bought my phone last week and only received it yesterday and last night, i was updating it on itunes, when it went into recovery mode.
I have tried many different ways of getting it out and nothing has helped at all.
And now, my iTunes will not even recognise the device.
When I was trying to restore the phone it kept coming up with code 1015.
Please help!

Morning lisa-mariefromqld,
Thanks for using Apple Support Communities.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software.
For more information on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694#error1015
To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
For more troubleshooting on this, take a look at this article:
iPhone not appearing in iTunes
http://www.apple.com/support/iphone/assistant/itunes/
Best of luck,
Mario

TS1362 I have a Mac Pro tower, am running osx and iTunes will not work.. It basically just stopped working after having run faultlessly for...years... I can see all the songs, playlists etc, but the progress bar will not progress..it's 'stuck'. Suggestion

I have a Mac Pro tower am running OSX and iTunes will not work. It has always worked flawlessly. I can see all my iTunes content- my playlists, my songs et cetera, But I cannot play anything. The progress bar is 'stuck'...any suggestions?

Thanks. I have been using iTunes since its inception and have never had a problem...I'm using the latest version. The progress bar is the bar that moves when you're playing a song..it just won't start when I double click on a song,..have tried quitting, rebooting etc but nothing works. Apple are useless-they have told me twice they've tried to call me 'momentarily', but I've been waiting by the phone, and they definitely have not tried to call...

HT201407 Per the "Completing Authorized iPhone Unlock" instructions, I connected to iTunes to back up and restore so my iPhone can be unlocked! But after the restore my iPhone is stuck at the activation screen, it will not activate.

Received an authorized unlock code from apple/AT&T for my off-contract 3GS (8GB). Per the “Completing Authorized iPhone Unlock” instructions, I connected to iTunes to back up and restore so my iPhone can be unlocked! But after the restore my iPhone is stuck at the activation screen, it will not activate saying “Your iPhone cannot be activated because the activation server is temporarily unavailable”. I tried this again and again for countless times, no way! I have my old AT&T simcard and other carrier’s simcard. Both will not help. Please help me to activate and start using my phone.

Hello,
I got like the same problem, last days I get message to restore my iPhone, so I did it yesterday and it work very well. In the afternoon I saw that at top in the left corner show invaild sim card or so (only knew the german version). so I restore it again but now it won`t activate after I enter SIM-PIN and it accept it, it shows "No Service".
Anybody can help? My Carrier is o2 Germany.
Thanks!

What can I do to change the sound of a track in garageband? It is "stuck" on electric piano setting and will not change. I've tried restarting, restoring sound library, full key reset, and checked for updates.

What can I do to change the sound of a track in garageband? It is "stuck" on electric piano setting and will not change. I've tried restarting, restoring sound library, full key reset, and checked for updates.

Hi
In iMovie'11 (version 9.0.x)
on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
Here one can select the Pre-Set speeds
Are you familiar with getting 'inspector' to run?
No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
Yours Bengt W

Phone stuck in recovery mode error code 40 and would not restore

My Iphone 3GS stuck in recovery mode error code 40 and would not restore.I was with AT & T.Please help!

Hi there...
Actually I was stuck with this situation yesterday. Here is what I did to overcome this issue: I hope it helps.
To start with, here are few things to you should make sure of:
1- You have the latest version of iTunes. You may try to uninstall and reinstall iTunes.
2-Restart your Windows.
If still no luck, try editing the Hosts file, here is how;
1- click on RUN then copy and paste the following:
notepad c:\windows\system32\drivers\etc\hosts
2- look for gs.apple.com
3- if there are numbers infront of it just delete them or just type # before the numbers.
4- Save the file and try restoring again.
Note: you should have administror access to edit the Hostes file.
put your iphone in DFU mode before restoring.
I hope this helps. It did for me

Tried downloading itunes version 11.4 and received an error code 2324. Now itunes will not work at all and I cannot sync my phone, ipad or ipod. How should I proceed?

I have tried several times to load version 11.4 and keep getting an error code2324, now I cannot sync any of my apple products. I set my machine to a previous recover date, now iTunes will not work at all. I get a message stating I do not have the administrator rights to download. Any thoughts on this issue?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

My version of Lookout 6.0 is stuck in integrator mode. Actv. Codes will not work to get it out.

Similar Messages

Maybe you are looking for