My very first 2012 R2 Hyper V VM. The instructions do not work!

I have a new machine with 2 Westmere CPUs and 4 SAS disks in 2 Raid pairs.
WS 2012 r2 is installed and I have set up a Hyper-v Role, and rebooted, etc
I have set up Gen 2 VM which starts fine
I have an iso image downloaded from MS and mounted that as a DVD in the VM Manager and have put that first in the boot order.
When I start the machine I get
Boot Failed. EFI SCSI Device
(Same happens when I create a new machine with the Wizard and specify the OS installation iso image right at the start.)
I have followed all the instructions to the letter. Why do MS supply a product which falls at the very important stage of installing an OS in a VM?
Notes
I am new to the technical depths of Windows.
This is a single machine, not part of cluster. It is in a workgroup, not a domain - if that matters.
I have tried to read couple of other threads that mention the same error, but the are not quite the same situation and also I cannot follow the suggested fixes at all.
Please could someone tell me what to do via simple, point and click, step by step instructions, without assuming any knowledge on my part?
Thank you very much indeed.

Well, MS have explained to me that you have to hit "any key" within a second of turning the machine on.
Then it WILL boot from the DVD drive. This is not an issue with Gen 1, but Gen 2 seems to ignore the boot order in settings.

Similar Messages

I have the iPad 2 16GB, bought it in August 2011, I worked perfectly but in mid-August 2012 I took her to the store because the microphone did not work reviewed and changed me, but to my surprise that the new iPad had the problem is disconnected WIFI sign

I have the iPad 2 16GB, bought it in August 2011, I worked perfectly but in mid-August 2012 I took her to the store because the microphone did not work reviewed and changed me, but to my surprise that the new iPad had the problem is disconnected WIFI signal I have to be glued to the router, and I did everything he says is supported by the Apple and all other pages and forums regarding this problem is not solved and always disconnects when connected always disconnects again!! passing will be settled as no longer factory warranty although it has neither the three months I renewed new, please help because the investment has been great and I can not use only as "a mirror" I'm waiting a true solution, thanks ....
Sincerely,
Catlos

This does help me because I am pondering on wether to buy an airport extreme to solve my ipad 2 connection woes. I have an extremely old router dLink 524....but I have NEVER had any problems with it at all ever. My xbox connected great to it and netflix ran flawless through my xbox.....now I have an ipad2 and an apple tv and they are BOTH having horrible connection problems. I have read most of the forums on how to fix it by changing the settings on my router but since mine is so old I couldn't do some of the suggested solutions. So here I am debating on whether to spend all this $ on an airport extreme? I am just hoping that if I go and purchase this, my connectivity issues problems will go away like yours did. Just wondering if you have ATV as well and if the AE solved its problems? I have read about AE solving ipad2 wifi problems, I'm just hoping it will solve my ATV as well.
**Glad they didn't "moderate into extinction" your post yet, lol, Thank

I have seen on this community that the earpods do not work on iPod shuffle gen 3 but when I was using on them it worked the control panel thing that is but only until I turned it off I don't understand why it won't work again and why it did in the first p

I have seen on this community that the earpods do not work on iPod shuffle gen 3 but when I was using on them it worked the control panel thing that is but only until I turned it off I don't understand why it won't work again and why it did in the first place can someone please explain and tell me how to make it work again

Sorry first time asking question didn't mean to write same thing twice well copy paste

Repairing Library Permissions: But the instructions didn't work clicking the iPhoto icon with the Option and Command keys opened iPhoto but not the First Aid as promised

Went to Help. But the instructions didn't work
clicking the iPhoto icon with the Option and Command keys opened iPhoto but not the First Aid as promised

Give this a try:
1 -be sure to have a current backup of the iPhoto library.
2 - download and launch http://www.macchampion.com/arbysoft/BatChmod.
3 - click on the File button, locate and select your iPhoto Library.
4 - check the Unlock and Apply to enclosed checkboxes.
5 - make no changes to the other checkboxes
6 - click on the Apply button.
OT

HT1476 I have a big problem in my phone charger . I have Iphone 5s . I don't know what is the problem but the bettery is not working true . A decrease in the battery very quickly and then turns off the machine . Please, I want to address this problem quic

I have a big problem in my phone charger . I have Iphone 5s . I don't know what is the problem but the bettery is not working true . A decrease in the battery very quickly and then turns off the machine . Please, I want to address this problem quickly .

http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/

I bought creative suite cs6 design standard student and teacher edition and the download did not work properly - files appear incomplete/ or damaged - none of the program items work at all. File size for installation seems very small for a product of this

I bought creative suite cs6 standard student and teacher edition and the download did not work properly - files appear incomplete/ or damaged. File size seems very small for a product of this size. Can you assist with download issue or provision of software ?

Lalalaladog where did you download CS6 from? I would recommend downloading the installation files for Creative Suite 6 Design Standard at Download CS6 products

On a Mac v10.6.6 Firefox v3.6.13 Right click on Google Map does not bring up the drop down box, with the first item being directions from here, the right click does work on Google map when using Safari

On a Mac v10.6.6 Firefox v3.6.13 Right click on Google Map does not bring up the drop down box, with the first item being "directions from here", the right click does work on Google map when using Safari

Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 9.0 r999
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
http://java.com/en/download/faq/firefox_newplugin.xml
See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

HT1349 I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?

I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?

The warranty is only good in the U.S.
You woulod have to send it to someone in the U.S. They could take it in and if it is defective, then it would be replaced.

I just bought my first iphone 4 actually i bought two and for some reason on both phones one of the speakers does not work im just wondering if this is normal because i took it back to the store and they told me all of the phones are the same?????

i just bought my first iphone 4 actually i bought two and for some reason on both phones one of the speakers does not work im just wondering if this is normal because i took it back to the store and they told me all of the phones are the same?????

There is only one speaker, what looks like another speaker is actually a microphone. All iPhones only have one speaker down by the dock connector.

Windows Server 2012 Foundation, in a Workgroup - "The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller"...

Every few days we see two dialogs with the following messages:
Dialog 1, title: Check for Licensing Compliance is Incomplete
The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller.
Dialog 2, title: Check for Licensing Compliance is Incomplete
The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliance check cannot be completed, the server will automatically shut
down in 8 day(s) 23 hour(s) 0 minute(s).
The server is not (and never has been) joined to a domain or had any DC roles installed. In fact its still connected to the default Workgroup.
The server was configured in our office and never showed this message until it was installed on site. The main difference from what I can see is that when installed on site it was given a static IP address and does not have any DNS settings in the network
adapter properties.
I have scoured a number of forums on this error but in almost every other instance of this error message the servers are connected to a Domain Controller and the solutions generally are linked to dis-joining and rejoining the domain. Unfortunately this is
not an option for this scenario.
I initially thought that adding some relevant DNS server IP address may resolve the issue, however, we have the exact same model server configured exactly the same running at a different site that does not experience this problem. This server also has no
DNS server configured.
I have seen a post that suggests turning off the servers "Foundation Checking", but I'm unsure how to do this.

Thanks for your response Vivian.
I can confirm that this server is not (and never has been) a member of any active directory, it is configured as a Workgroup server. It was initially configured on a network that does have an active directory, but was never joined to it. During that time it
never displayed these messages.
The server was moved into production on a different site and network and setup with a static IP address.The site network does have its own active directory but the server was not joined to it. It is whilst on this new network that these messages began.
Since my original post DNS servers have been added and the Microsoft activation has been verified, however, the messages are still appearing.
There are only 2 user accounts configured on this server. The local admin account and another local admin user.
The remote desktop services roles have been installed but not yet configured. I don't think that has any bearing on this scenario though.
The description of this error in the above "Introduction to Windows Server 2012 Foundation" link states:
This error occurs when the server cannot finish checking the requirements for the root domain, forest trust configuration, or both. It usually happens when the server cannot connect to a domain controller. If the situation persists, the server will
shut down 10 days after the first time the compliance check failed. Each time this error message occurs, it will state the actual time remaining before the server will shut down. If you restart the server after it has shut down because of non-compliance, the
server will shut itself down again in 3 days.
The above description leads me to the following question - In a Workgroup environment, does the server still try to contact a domain controller to establish a level of trust? If this is the case could it be that the server can no longer see the initial DC
on its new network and this is what is triggering the messages?
Am I clutching at straws here?

TS1398 Just got the mini, specifically to get jobs on a certain website. Jobs change all the time. When I go to website, it has not updated from the first time I logged in on the mini. It works on my laptop just fine. HELP!

My sons just bought me an ipad mini especially so that I could check a certain website on which I sign up for jobs throughout the day. The website is updated constantly throughout the day with new jobs and the status of the jobs I already have accepted and worked on. (It shows the percentage of the job that has been done.) It worked fine only the first time I logged on with the mini. Since then (yesterday,) when I check the website, it lets me log in, but I only see the same exact information that was there the first time I went to the website using the mini. It seems to be 'frozen' on that particular first look. It doesn't update at all.
I know it is not updating because I have also been checking with my notebook computer and with the notebook, the website is up to date.
Maybe its Safari?
I had the same problem when I used a friend's iPad.
I wonder if there is a setting or something that I could change to allow the website to update to the time I check it.
If not, then the ipad mini is a terrible disappointment and I would like to return it.
If you can help me, I would be extremely grateful.
Thanks in advance...

This issue can be caused by corrupted cookies or cookies that are blocked.
*check the permissions on the about:permissions page and in "Tools > Page Info > Permissions"
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Error trying to Connect to WSE 2012 R2 with Connector Software - The server is not available

I had to completely reset my MS Surface Pro 3 due to virus activity, so it was wiped and reinstalled. It had previously connected to the Server without
hiccup. Ever since doing this I cannot reconnect using the SERVERNAME\Connect process - it continually fails. I have reviewed the forums and web for a week trying different solutions to no avail. I would appreciate it if someone could advise?
I have:
Ensured that the Connector Software update is not installed from Installed Updates
Checked the Bindings in IIS Manager against the WSS Certificate Web Service and it is set to SERVERNAME.
Ensured my time on the Client is synchronised
Tried connecting using the original PC-Name and when that didn't work, I have tried a new name and removed the old device from the server.
I have ensured that I am on a Workgroup.
The install process finds the server sets up connector and asks for my network user name and password and then continues for a fair time until it
comes back with the error”:
"The server is not available/ Try connecting this computer again, of for more information, see Troubleshoot connecting computers to the server.”
I am not sure how much of the log to include as it all doesn’t fit:
[1380] 150118.132140.0358: ClientSetup: Start of ClientDeploy
[1380] 150118.132140.5201: General: Initializing...C:\windows\system32\Essentials\ClientDeploy.exe
[1380] 150118.132140.5201: ClientSetup: Create client deployment registry subkey if necessary
[1380] 150118.132140.5358: ClientSetup: The initial launching way: -LaunchedFrom:installer
[1380] 150118.132140.5358: ClientSetup: The initial state is set
[1380] 150118.132140.5358: ClientSetup: The initial serverName: 192.168.1.100
[1380] 150118.132140.5358: ClientSetup: Loading Wizard Data
[1380] 150118.132140.5670: ClientSetup: Saving Wizard Data
[1380] 150118.132140.5826: ClientSetup: Current DeploymentStatus=Start
[1380] 150118.132140.9420: ClientSetup: Showing the Client Deployment Wizard
[1380] 150118.132141.0670: ClientSetup: Machine name:SURFACE3RUTH, length:12
[1380] 150118.132141.0983: ClientSetup: The input server name is 192.168.1.100
[1404] 150118.132141.1295: ClientSetup: Entering ConnectorWizardForm.RunTasks
[1404] 150118.132141.1295: ClientSetup: Running Task with Id=ClientDeploy.PreConfiguration
[1380] 150118.132141.1295: ClientSetup: InitWizard, The currrent stage is ConnectingToServer
[1380] 150118.132141.1295: ClientSetup: Set the Deployment Sync Event
[1404] 150118.132141.1764: ClientSetup: The configuration cab will be downloaded from 192.168.1.100
[1404] 150118.132141.1920: ClientSetup: Download file Setup.cab from server
[1404] 150118.132141.2233: ClientSetup: Making web request: https://192.168.1.100//connect/default.aspx?Get=Setup.cab&LanguageId=2057&64bit=1
[1404] 150118.132141.5358: ClientSetup: Failed to download Setup.cab from server: System.Net.WebException: The underlying connection was closed: Could
not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.ConnectStream.WriteHeaders(Boolean async)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.WindowsServerSolutions.ClientSetup.CSCommon.DownloadFileFromConnectSite(String outputDirectory, Uri serverUrl, String fileName, Int32 languageId, Boolean is64bit)
[1404] 150118.132141.5358: ClientSetup: Cannot get configuration file with https, will try http...
[1404] 150118.132141.5358: ClientSetup: Download file Setup.cab from server
[1404] 150118.132141.5358: ClientSetup: Making web request: http://192.168.1.100//connect/default.aspx?Get=Setup.cab&LanguageId=2057&64bit=1
[1404] 150118.132141.7233: ClientSetup: Downloaded file C:\windows\Temp\ClientDeploymentTempFiles\Setup.cab
[1404] 150118.132141.7233: ClientSetup: The configuration cab is downloaded to C:\windows\Temp\ClientDeploymentTempFiles\Setup.cab
[1404] 150118.132141.9264: ClientSetup: Adding Server Info data in the Product Registry
[1404] 150118.132142.8170: Networking:DnsEnvironmentDetector: Dns.GetHostAddresses threw exception: System.Net.Sockets.SocketException (0x80004005):
No such host is known
at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6)
at System.Net.Dns.GetHostAddresses(String hostNameOrAddress)
at Microsoft.WindowsServerSolutions.Networking.ServerDiscovery.DnsEnvironmentDetector.GetAddressesFromDns(String machine)
[1404] 150118.132142.8170: DnsEnvironmentDetector: No result from GetHostAddresses(), normal environment
[1404] 150118.132142.8170: ClientSetup: Exiting PreConfigTask.Run()
[1404] 150118.132142.8170: ClientSetup: Task with Id=ClientDeploy.PreConfiguration has TaskStatus=Success
[1404] 150118.132142.8170: ClientSetup: Task with Id=ClientDeploy.PreConfiguration has RebootStatus=NoReboot
[1404] 150118.132142.8170: ClientSetup: Exting ConnectorWizardForm.RunTasks
[1896] 150118.132158.7568: ClientSetup: Running InstallRootCert Task at WizardPage DomainUserCred
[1896] 150118.132158.7568: ClientSetup: Entering ConnectorWizardForm.RunTasks
[1896] 150118.132158.7568: ClientSetup: Running Task with Id=ClientDeploy.InstallRootCertTask
[1896] 150118.132158.7880: ClientSetup: Entering InstallRootCertTask.Run
[1896] 150118.132158.7880: ClientSetup: Install root cert to local trusted store
[1896] 150118.132158.7880: ClientSetup: Exiting InstallRootCertTask.Run
[1896] 150118.132158.7880: ClientSetup: Task with Id=ClientDeploy.InstallRootCertTask has TaskStatus=Success
[1896] 150118.132158.7880: ClientSetup: Task with Id=ClientDeploy.InstallRootCertTask has RebootStatus=NoReboot
[1896] 150118.132158.7880: ClientSetup: Exting ConnectorWizardForm.RunTasks
[1896] 150118.132158.7880: ClientSetup: Running SetupVPNAndDA Task at WizardPage DomainUserCred
[1896] 150118.132158.7880: ClientSetup: Entering ConnectorWizardForm.RunTasks
[1896] 150118.132158.7880: ClientSetup: Running Task with Id=ClientDeploy.SetupVpnAndDATask
[1896] 150118.132158.8193: ClientSetup: Entering SetupVpnAndDATask.Run
[1896] 150118.132158.8974: ClientSetup: Exting SetupVpnAndDATask.Run
[1896] 150118.132158.8974: ClientSetup: Task with Id=ClientDeploy.SetupVpnAndDATask has TaskStatus=Success
[1896] 150118.132158.8974: ClientSetup: Task with Id=ClientDeploy.SetupVpnAndDATask has RebootStatus=NoReboot
[1896] 150118.132158.8974: ClientSetup: Exting ConnectorWizardForm.RunTasks
[1896] 150118.132158.8974: ClientSetup: Running ValidateUser Tasks at WizardPage DomainUserCred
[1896] 150118.132158.8974: ClientSetup: Entering ConnectorWizardForm.RunTasks
[1896] 150118.132158.8974: ClientSetup: Running Task with Id=ClientDeploy.ValidateUser
[1896] 150118.132158.9286: ClientSetup: Entering ValidateUserTask.Run
[1896] 150118.132158.9286: ClientSetup: Validating User
[1896] 150118.132158.9286: ClientSetup: Call MachineIdentityManager.GetMachineStatus
[1896] 150118.132200.2412: ClientSetup: Current Machine Join Status: NotExists
[1896] 150118.132200.2412: ClientSetup: Exiting ValidateUserTask.Run
[1896] 150118.132200.2412: ClientSetup: Task with Id=ClientDeploy.ValidateUser has TaskStatus=Warning
[1896] 150118.132200.2412: ClientSetup: Task with Id=ClientDeploy.ValidateUser has RebootStatus=NoReboot
[1896] 150118.132200.2412: ClientSetup: Exting ConnectorWizardForm.RunTasks
[1896] 150118.132203.5996: ClientSetup: User has chosen to continue using domain admin credentials
[1896] 150118.132203.5996: ClientSetup: Running JoinNetwork Tasks at WizardPage DomainUserCred
[1896] 150118.132203.5996: ClientSetup: Entering ConnectorWizardForm.RunTasks
[1896] 150118.132203.5996: ClientSetup: Running Task with Id=ClientDeploy.JoinDomain
[1896] 150118.132203.6152: ClientSetup: Entering JoinDomainTask.Run
[1896] 150118.132203.6152: ClientSetup: Domain Join Client to Server Domain: ClientComputerName=SURFACE3RUTH ServerDomainNetBiosName=AHYICK
[1896] 150118.132203.6152: ClientSetup: Trying to evaluate if we need to set Local Nic Dns address be the same as server DNS setting.
[1896] 150118.132204.4590: ClientSetup: DNS failed to resolve server's host name, needs set DNS
[1896] 150118.132204.4590: ClientSetup: Trying to set DNS setting.
[1896] 150118.132204.4590: ClientSetup: Configure DNS settings on local NIC
[1896] 150118.132205.7153: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1896] 150118.132206.7787: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1896] 150118.132207.8293: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1404] 150118.132214.6885: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1404] 150118.132224.7076: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1404] 150118.132234.7311: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1896] 150118.132235.8561: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1896] 150118.132236.9186: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1896] 150118.132237.9655: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1404] 150118.132244.8406: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1404] 150118.132254.8601: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1404] 150118.132304.8898: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1896] 150118.132306.0148: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1896] 150118.132307.0461: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1896] 150118.132308.1131: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1404] 150118.132314.9742: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1404] 150118.132324.9961: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1404] 150118.132335.0140: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1896] 150118.132336.1495: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1896] 150118.132337.1888: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1896] 150118.132338.2320: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1404] 150118.132345.1355: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1404] 150118.132355.1699: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1404] 150118.132405.2086: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1896] 150118.132406.3337: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1896] 150118.132407.3883: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1896] 150118.132408.4351: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1404] 150118.132415.3043: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1404] 150118.132425.3696: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1404] 150118.132435.4170: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1896] 150118.132436.5769: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1896] 150118.132437.6137: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1896] 150118.132438.6607: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1404] 150118.132445.5693: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1404] 150118.132455.5861: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1404] 150118.132505.6068: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
= '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
[1896] 150118.132505.6068: ClientSetup: Could not successfully set the DNS of any client NIC
[1896] 150118.132505.6068: ClientSetup: Failed to set Local Nic Dns address as the Server IP.
[1896] 150118.132505.6068: ClientSetup: NetGetJoinInformation (server = [], ...)
[1896] 150118.132505.6148: ClientSetup: Running Join Domain
[1896] 150118.132505.6148: ClientSetup: Disconnect any share to the server.
[1896] 150118.132505.6148: ClientSetup: NetUseEnum (UncServerName = [] )
[1896] 150118.132505.6304: ClientSetup: NetUseEnum (UncServerName = [] )
[1896] 150118.132505.6304: ClientSetup: Trying to clear dns cache.
[1896] 150118.132505.6304: ClientSetup: ComputerMgmt.FlushDnsCache starts
[1896] 150118.132505.6461: ClientSetup: ProcessHelper.StartProcessWithRedirectOutput() Executing "C:\windows\system32\ipconfig.exe" /flushdns
[1404] 150118.132505.6832: ClientSetup: Standard Ouptput:
[1404] 150118.132505.6832: ClientSetup: Standard Ouptput: Windows IP Configuration
[1404] 150118.132505.6832: ClientSetup: Standard Ouptput:
[3964] 150118.132505.6832: ClientSetup: Standard Ouptput: Successfully flushed the DNS Resolver Cache.
[3964] 150118.132505.6832: ClientSetup: Standard Ouptput:
[5080] 150118.132505.6832: ClientSetup: Standard Error:
[1896] 150118.132505.6832: ClientSetup: The exit code of the process (C:\windows\system32\ipconfig.exe) is: 0
[1896] 150118.132505.6832: ClientSetup: Calling SetPrimaryDnsSuffix.
[1896] 150118.132505.6832: ClientSetup: SetPrimaryDnsSuffix (AHYICK.local)
[1896] 150118.132505.6832: ClientSetup: SetComputerNameEx (AHYICK.local)
[1896] 150118.132505.6832: ClientSetup: Update tcpip Domain parameter with AHYICK.local
[1896] 150118.132505.6832: ClientSetup: Calling join domain [AHYICK.local] with domain user [AHYICK.local\Basil] credential.
[1896] 150118.132505.6832: ClientSetup: Joining local machine to domain AHYICK.local
[1896] 150118.132505.6832: ClientSetup: NetJoinDomain( , AHYICK.local, , AHYICK.local\Basil, *, NetSetupJoinDomain, NetSetupAcctCreate, NetSetupAcctDelete,
NetSetupDomainJoinIfJoined, NetSetupDeferSpnSet)
[1896] 150118.132505.7457: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
[1896] 150118.132506.7789: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
[1896] 150118.132507.8248: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
[1896] 150118.132508.8666: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
[1896] 150118.132509.8997: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
[1896] 150118.132510.9440: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
[1896] 150118.132511.9868: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
[1896] 150118.132513.0218: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
[1896] 150118.132514.0673: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
[1896] 150118.132515.0987: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
[1896] 150118.132515.1143: ClientSetup: Join domain fails on the first time, exception: System.ComponentModel.Win32Exception (0x80004005): The specified
domain either does not exist or could not be contacted
at Microsoft.WindowsServerSolutions.ClientSetup.NativeMethods.NativeMethodRetryWrapper(NativeMethodInvoker nmi, UInt32 numTries, TimeSpan timeToWaitBetweenRetries, String descriptionForLog, UInt32[] retryableErrorCodes)
at Microsoft.WindowsServerSolutions.ClientSetup.NativeMethods.NetJoinDomain(String server, String domain, String destinationOuPath, String user, SecureString password, JoinDomainOptions joinOptions)
at Microsoft.WindowsServerSolutions.ClientSetup.ComputerMgmt.JoinDomain(String domainName, String domainUserName, SecureString domainUserPass, String machineAccountOU)
at Microsoft.WindowsServerSolutions.ClientSetup.ClientDeploy.JoinDomainTask.Run(WizData data)
I am running a Telstra ADSL modem with a separate Cisco router and Netgear Switch.
I would appreciate any help I can get please as I am a novice and do not understand a lot about the certificate and DNS errors.

Would you please try manually set the DNS address on client NIC to the IP of your server, then try run the connector again?

Windows Server 2012 - Backup failing with Exchange - The application will not be available for recovery from this backup. the consistency check failed

Hi
We have a Windows 2012 server with Exchange 2013, all is working fine except now i am getting issues with the backup.
'Exchange - The application will not be available for recovery from this backup. the consistency check failed for the component Microsoft Exchange Server'
I have checked the database all is fine, i have created a new db and move all mailbox;s over and then removed the old db, i have enabled circular logging and then disabled it, it seems no matter what i do i cannot get a full backup!
i did have to restore the server once and the backups still worked for about 4 days after that and then stopped, i have also tried to remove and re add the backup role!
i am stumped, any advice would be great!

Hi
Ok, i created a test db and tried to back it up right away, it failed, i did not add any mailbox's to it either. i got quite a few events in the windows logs, as well as the same event above i got the following:
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2038
Task Category: Exchange VSS Writer
Level: Warning
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database 4843b37c-7b3c-42b2-8b57-1393615c2c15.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="32772">2038</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261645</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>4843b37c-7b3c-42b2-8b57-1393615c2c15</Data>
</EventData>
</Event>
AND
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2038
Task Category: Exchange VSS Writer
Level: Warning
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database db5826f3-1029-4219-ad80-441a0e94537a.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="32772">2038</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261646</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>db5826f3-1029-4219-ad80-441a0e94537a</Data>
</EventData>
</Event>
and
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2034
Task Category: Exchange VSS Writer
Level: Error
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
The Microsoft Exchange Replication service VSS Writer (Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9) failed with error FFFFFFFC when processing the backup completion event.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="49156">2034</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261649</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>FFFFFFFC</Data>
</EventData>
</Event>
and
Log Name: Application
Source: SPP
Date: 21/01/2013 10:16:30
Event ID: 16389
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Writer Microsoft Exchange Writer experienced retryable error during shadow copy creation. Retrying... More info: .
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SPP" />
<EventID Qualifiers="0">16389</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261650</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>Microsoft Exchange Writer</Data>
<Data>
</Data>
<Data>The writer experienced a transient error. If the backup process is retried, the error may not reoccur. (0x800423F3)</Data>
<Data>
</Data>
<Binary>00000000A5120000981200000000000042BEB7C511CAC619E59C92030000000000000000</Binary>
</EventData>
</Event>

Windows 8.1 with Hyper-V external switch - 802.1x not working in host nor guest

Hi,
I have Windows 8.1 with installed Hyper-V and virtual machines connected via Hyper-V Switch - External. 802.1x wired authentication is not working in host nor in guest machine (computer is not responding to switch requests). If I will change switch mode
to Internal/Private it will start working.
Do you have any idea how to get it working also in external mode?

Hi,
What is the physical network configuration in your environment? Are you using wireless or wired connection?
We tested this issue as you described here, and the external switch is working fine.
Have you tried to delete the created switches and recreate one, test this issue again?
Yolanda Zhu
TechNet Community Support

Only display first form URL in formsweb.cfg . mutiple URL does not work

Hi Friends,
I have 4 form application with 4 URL.
app. server as 10g in window 2003.
URL like as:
http://salerpt.com/forms/frmservlet?config=emis-srmenu
fmx file Location as C:\OraMid\forms\salerpt-Forms fmx name as srmenu.fmx in same directory
fmb file location as C:\OraMid\forms\salerpt-Forms_source fmx name as srmenu.fmb in same directory
# Single Sign-On OID configuration parameter
oracle_home=C:\OraMid
in formweb.cfg file
baseHTMLjinitiator=basejini.htm
workingDirector : workingDirectory= blank. but C:\OraMid\forms\salerpt-Forms right now
# Forms runtime argument: which form module to run
##form=test.fmx
## i moved bottom section of form section in here and before
##line as Forms runtime argument: database connection details
comment two line
#jinit_exename=jinit.exe
#jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
I create 4 sections as
form=srmenu.fmx
width=1200
height=700
pageTitle=Sale Information System (SIS)
form=regsale.fmx
form=salefinincial.fmx
form=rptinfo.fmx
However it only display first srmenu form interface that i put in( 4 different URL. only display first URL)
It seems that one formsweb.cfg, it doesn not support multip form setting application.
I have 4 small forms application with 4 URL for one formsweb.cfg.
What should I need to do? I think that i miss some set up in configuration.
I am waiting for your help!
JIm

Hi Bgrant,
Please review my formsweb,cfg.
Thanks
I am looking for your help.
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory= C:\OraMid\forms\sales-Forms
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
#form=test.fmx
[[srmenu]]
form=srmenu.fmx
width=1200
height=700
pageTitle=Sale Management Information System
[[regsale]]
form=regsale.fmx
width=1200
height=1500
pageTitle=Sale Management Information System
[[salefinincial]
form=salefinincial.fmx
width=1200
height=1300
pageTitle=Sale Management Information System
[[rtpinfo]]
form=rptinfo.fmx
width=1200
height=1000
pageTitle=Sale Management Information System
# Forms runtime argument: database connection details
userid=scott/tigerd@oracleapp
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
#width=750
width=1024
# Forms applet parameter
#height=600
height=768
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
#jinit_exename=jinit.exe
#Version=1,3,1,22
# Parameter related to the version of JInitiator
#jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=1
# Single Sign-On OID configuration parameter
oid_formsid=formsApp_sales.com_0Axxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
# Single Sign-On OID configuration parameter
oracle_home=C:\OraMid
# Single Sign-On OID configuration parameter
formsid_group_dn=cn=Logical Application Group, orclApplicationCommonName=formsApp_sales.com_0A4911717Fxxxxxxxxxx, cn=forms, cn=Products, cn=OracleContext
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=False
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle

My very first 2012 R2 Hyper V VM. The instructions do not work!

Similar Messages

Maybe you are looking for