My Video Camera won't capture sound!

My camera will not capture sound! I have done loud things to test it while recording, turned my sound all the way up, and played it to hear nothing. I put in headphones to try it, and once again i heard nothing. I was sure it was recording when I spoke and I know that there was supposed to be noise. What is wrong with my Nano?

Run through these troubleshooting steps to see if this solves your problem. Let us know if this does it for you.
http://www.apple.com/support/ipod/five_rs/nano5gen/
i

Similar Messages

  • Camera won't capture credit card for Apple pay

    When I attempt to use the little blue camera icon option in Apple Pay to capture a credit card and it's info, nothing happens. The camera won't capture a picture of my credit card. I hold my phone camera hovering very still over my credit card making it's sure it's within the guideline over and over and nothing happens.
    I know my bank and my credit card support Apple Pay.

    Hi ...
    Make sure your iPhone is updated to iOS 8.1
    Tap Settings > General > Software Update
    If it's already running 8.1, try a reset.
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings then try again.
    Instructions for setting up Apple Pay >  Apple Pay

  • Camera won't capture image

    Camera will not capture images. Purely states 'unable to capture image'. Video camera comes up with coloured lines, no image. Reasonably new handset, have tried rebooting and clearing down all apps. Any ideas??

    Sounds like a hardware problem to me but i could be wrong. Try backing it up and doing a security wipe and see if it helps.

  • My  sony hdv 1080i mini dv camera won't capture

    I've been trying to capture a video that I recorded with my SONY (HDV) HDR-FX1E camera from sony hdv 1080i mini dv but the camera would go on playing but it won't display any frame and it would show this error when i click stop stating that "recorder captured no frames". When its playing from the sony hdv 1080i mini dv camera it shows DV SP PAL on the lcd monitor.
    PLEASE, someone should help me, I need to capture this video now.

    As far as I know, HDV does not display during transfter from camcorder via Firewire
    Try this for HD capture http://strony.aster.pl/paviko/hdvsplit.htm

  • Video camera won't work

    I try to change from photo to video but it will not allow me to select video.

    Are you tapping video or are you swiping to video?  In IOS 7 you have to swipe to video and it will turn yellow and you'll see the red button to record.

  • Can I use a Bluetooth headphone/microphone for capture sound instead of normal iPhone mic when shooting video?

    Can I use a Bluetooth headphone/microphone for capture sound instead of normal iPhone mic when shooting video?
    The sound when I record video is not so good, so I'm trying to use the Bluetooth headphone/microphone to capture a person voice but not know which setting to use.

    Hi Robert
    Thanks for answering. I didn't know where to post other than the bluetooth forum which is relatively quiet and had no answers forthcoming.
    Yes the voice isn't reaching the amp although it is registering on the input bar in the Sound System Prefs, just won't "play through" as it were. I can't see how it could be done I was just hoping someone might see something I am missing.
    It seems a shame that you can't do it as iTunes on an old iBook makes a good juke box for DJ'ing and with everything becoming wireless these days it seems sensible that you could cut that one last wire.
    Mike

  • Can't capture from my cannon video camera to Final Cut or iMovie.

    Hi. I can't capture from my cannon video camera to FInal Cut or iMovie. ANy help would be greatly appreciated. I don't think my iMac is recognizing the camera. I was told I don't need a firewire, that USB would work if I'm just capturing. If I need a firewire what kind (the one I was sold didn't fit). I'm getting an "unable to locate external device message". Not sure of next steps to try. Thanks.
    Computer= iMac 21.5-inch: 2.5GHz
                2.5GHzQuad-Core Intel Core i5
                1920 x 1080resolution
                4GB (two 2GB)memory
                500GB harddrive1
                            AMDRadeon HD 6750M with 512MB
    Processorand Memory -
    Powered by a quad-core Intel Core i5 or i7 processor and DDR3memory.
    Connectionsand Expansion
    SuperDrive, SDXC card slot, audio in, audio out, USB 2.0,FireWire 800, Thunderbolt, Gigabit Ethernet.
    Video camera = Canon Vixia HV40                                                                                                                                                
    Standard  Definition or High Definition 
    High  Definition 
    Power  Consumption 
    4.3 W 
    Television  System 
    NTSC 
    Video  Recording system 
    MPEG2 
    Image  Sensor 
    1/2.7-inch  CMOS, RGB Primary Color Filter 
    Total  Pixels 
    Approx.  2.96 Megapixels 
    Effective  Pixels 
    Tape:  HD/DV (16:9) mode: Approx 2.07 Megapixels (1920x1080) DV  (4:3) mode: Approx 1.55 Megapixels (1440 x 1080) Card:  (16:9) mode: Approx. 2.07 Megapixels (1920 x 1080), (4:3) mode: Approx. 2.76  Megapixels (1440 x 1080) 
    Tape  Format 
    HDV /  DV 
    Maximum  recording Time 
    SP: 80  minutes, HDV, DV LP: 120  minutes DV 
    Lens 
    Zoom  Ratio 10x Optical  / 200x Digital Focal  Length f=6.1-61mm  (35mm equivalent: 43.6 - 436mm) Zoom  Speed Variable /  3 Fixed Zoom Speeds Max.  F/Stop  f/1.8-3.0mm (when tapes are used) 
    Focusing  System 
    Instant  AF, TTL (through the lens) 
    Manual  Exposure 
    Yes 
    Programmed  AE 
    Auto,  Program, Av, Tv, CINE, Portrait, Sports, Night, Snow, Beach, Sunset,  Spotlight, Fireworks 
    Max  Shutter Speed 
    Movie:  1/2000, Still image: 1/500 
    Auto  Date/Time 
    Yes 
    Record  Search/Review 
    Yes 
    Focusing  System 
    10 mm  (wide) / 1m (tele) 
    White  Balance 
    Auto,  Daylight, Shade, Cloudy, Tungsten, Fluorescent, Fluorescent H, Manual 
    Frame  Rate 
    60i,  Native 24p Progressive (records at 24p), 24p Progressive (records at 60i),  30p Progressive (records at 60i) 
    Minimum  Illumination 
    0.2 lx  (Night Mode) 
    Image  Stabilization 
    SuperRange  Optical (lens shift) 
    Filter  Diameter 
    43mm 
    Viewfinder 
    Widescreen  0.27-inch Color Viewfinder / (Approx. 123,000 dots) 
    LCD  Screen 
    2.7-inch  Widescreen LCD (Approx. 211,000 dots) 
    Recording  Media 
    High  Definition Mini DV (recommended) (63 min) or MiniDV cassette 
    USB  Terminal 
    USB 2.0  Full Speed 
    Video  Terminal 
    component  (output), composite (output) 
    Audio 
    DV: 16  bit (2ch) 48 kHz 12 bit (4ch) 32 kHz 4ch synchronous recording not possible  HDV: MPEG1 Audio Layer II (2 ch) (4-channel playback of tapes containing  4-channel recordings possible) 
    Accessory  Shoe 
    Advanced 
    Supplied  Video Editing Software 
    None 
    HDMI Terminal 
    HDMI  Type A (19 pins) Connector (output) 
    Microphone  Terminal 
    3.5 mm  stereo mini-jack 
    AV Mini  Terminal/Headphone Terminal 
    3.5 mm  4 pole mini-jack (video/audio input and output) 
    Dimensions 
    (W X H  X D) 3.5 x 3.2 x 5.4 in. (88 x 82 x 138mm) 
    Weight  (not including lens and battery pack) 
    1.2  lbs. (535g) 
    Weight 
    1.4  lbs. (615g) 

    Forget USB for capturing from tape. USB is only for stills from a Tape Based camera.
    You require a firewire cable.
    The camera connection end will be four pin and the Mac is nine pin to the 800 port.
    Ask for a 9 to 4 pin firewire cable. Sounds like you have the wrong one as they can also be 4 to 4 or 4 to 6 pin!!
    Also you will need the correct Easy Setup in FCE so FCE talk to the camera, exactly which one depends on what type of footage is being sent to FCE from the camera during capture.
    Al

  • Disable Camera Capture Sound on Nokia E72

    There are just four option from which I can choose the camera capture sound on my Nokia E72. I want to disable the camera capture sound, so that I can silently click some photographs. Help me out please.

    @rahulbgm49
    Whilst not condoning it users can move to region where this feature is not prohibited and have no reason to believe that this won't work upon E72:/t5/Eseries-and-Communicators/E71-turn-of-camera-quot-sound-quot/m-p/503039/message-uid/503039/highl...
    Happy to have helped forum with a Support Ratio = 42.5

  • I've imported from a video camera and the files on the laptop are not playing the sound, is there any way to retrieve it?

    I have just uploaded a large number of files from a panasonic video camera on to imovie. I have never had this problem in the past, but when I try to play back the files on my laptop there is no sound. I have tried increasing the sound and normalising via the audio settings, and the sound is playing fine on the video camera. Is there anything I can do?

    I have also checked that the files are MOV not MPEG etc

  • FCE: Possible to Capture SD footage from digital video cam?

    Ok, probably a daft question this. Don't laugh...
    I'm thinking of purchasing a digital video camera that uses SD cards. I currently use a MiniDV cam and connect via Firewire.
    Is it possible to capture footage shot on SD cards into FCE?
    And, if so, should I use USB from the camera, or insert the SD card into my card-reader?
    The camera I'm looking at is able to record HD footage to a 2gb SD card (about 40 mins worth)
    Thanks for your time!

    Cheers Tom, I think you just saved me a small fortune..
    Here's the camera: http://reviews.cnet.co.uk/camcorders/0,39029967,49263047,00.htm
    (is it ok to link outside of the forums?)
    In case the link get removed by a moderator, the model is the Sanyo VPC-HD1

  • Unable to initialize video deck, (can not capture from camera)

    Hello All,
    I am using a quad core G5 and am trying to capture some footage into Final Cut Pro version 5.0. I have two Panasonic DVX 100B mini DV cameras. I normally capture with a JVC BR-DV3000 mini DV deck but it is currently not working. So I'm trying to capture using my camera.
    I hooked my camera up to my computer via firewire and started final cut, When I click File > Log and capture a little window pops up that reads:
    " Unable to initialize video deck. You may still log offline clips or use Capture Now"
    I'm not sure why this box is appearing. When I click the capture now button, the Capture window pops up and then I press play on the video camera and the footage plays on the camera but the capture window remains black or empty. I have tried both cameras and two different firewire cables with the same results. I have also tried to restart the computer.
    Can anyone shine some light on this situation?
    Thank you so much for your help.
    Mike Wardynski

    Are there any other firewire devices connected to your Mac?
    Did you go into your easy setup and reselect the DV setting for the standard you are using?
    Also sometimes, shutting down and restarting your Mac, after making these changes some times allows the new device to be recognized.
    One other thing, the DV camera may have a menu setting that needs to be set for communication via firewire possibly?

  • How do I connect two video cameras to my computer have them both show up on the desktop at the same time so I can see and capture both images using a screen capture program?

    Hello, 
    I am a teacher and want to make some videos to post online for my class.  I would like to have it set up so that I have a powerpoint presentation going, a video camera pointing at a piece of paper I can write on and another video camera pointing at me.  How do I do this?  I have seen several solutions but they seem to be for switching between videos whereas I want both video images to be on at the same time.
    Also, is there a screen capture program you would recommend?

    Go to System Preferences - Sharing and change the computer name there. You can also, optionally, change the name of your hard drive to further clarify the origin of your backups. Click once on the "Macintosh HD" on your desktop, then click its name to allow you to edit it.
    Matt

  • Videos on my macbook pro won't play sound after apple tv was installed in the house

    Hi! Need some help... for christmas my dad received the little black Apple TV device to watch videos on our big tv from his iPad. After it was installed no sound came from my macbook, it instead comes out of the tv speakers. When dad is airplaying a video from his iPad and I open a video on my mac, the iPad video gets interrupted and the sound from my video comes on without the visual. What's going on?! I see the airplay symbol on the top right bar but it always says disconnected, yet obviously the sound is somehow connected.

    that figures, VLC.
    Consider getting your dad the APP VLC streamer  for his Ipad, that way he can wifi beam movies etc. to his Ipad from any Mac.
    removes putting movies on an Ipad and clogging it up with large movie files.  Very handy

  • How can I download video from a Canon ZR30 video camera to my IMac.  I bought Elgato Video Capture, but the connections do not match.  There is no white female end in the camera.  Also, the red and yellow connections are loose at the camera end.

    How can I download video from a Canon ZR30 video camera to my IMac?  I have Elgato Video Capture, but the provided connectors are loose in the camera and the camera does not have a white female end.  No signal shows up on the computer when I connect the red and yellow connectors.

    Broken solder joints on the camera me thinks!!
    sorry

  • Video capture from video camera to macbook

    I can't figure out how to capture my video off my video camera and transfer it to my macbook. I have QT pro and have attached the firewire, but when QT pro launches, there is no option to capture...any thoughts? Thanks

    File, New Movie Recording. Press red button.

Maybe you are looking for

  • Using DVD drives in solaris 10

    Hello members, I am a beginner in the solaris. I can't connect my DVD drive with my Os that means i can use my DVD drives. So plz tell me how can i use my DVD? and tell me method of this

  • Free/busy information error for users whose primary SMTP is internal domain

    We have a scenario where we have some users on our network who use s web-based mail service but have AD logins as they need access to internal resources (file and print).  We have been asked to set up access for these users to the meeting rooms. An i

  • Mountain Lion upload

    The Internet link at my home seems to be too slow up upload Mountain Lion. Can I go to an Apple Store to have them load it or are there other solutions? Thanks for the help

  • Meta Data Documents

    Hi,      I can access a document attached to a query or web template by using the format: <A href="/SAP/BW/DOC/META/FLDMETA/ZWT_PUR_100E" target=_blank > Executive Dashboard Overview</A> Is there any way to look at (get a list of) all of the document

  • Reporting on a  table ?

    Hello BW Experts, can we do reporting on a custom table in BW ? is there a way to do this .. Thanks, BWer