My video has no sound! _
ok, i downloaded a dvd ripper and ripped a dvdonto my computer, i converted it and then, there's no sound! >_< what should i do?
check out this article- it helped me figure out how to convert dvds to ipod format...
http://www.ipodwizard.net/showthread.php?t=4413
you'll need to install dvd43, dvd shrink, and the videora ipod converter
thanks to "Freddie Mercury" for the how-to article!!
hope this helps
Similar Messages
-
why when I am accessing the site www.sportlemon.tv (www.trombar.com) the video has no sound?
Found the fix.
If the reboot doesn't fix it.
If the headphoens work find, but no external speakers.
If the double-click and page right to the software mute, doesn't show the sound knob - just the brightness
If your pop-up shows "Docking Station"
Then, the problem is very likely a dirty connector. The iPad/iPhone/iPod connector uses a resistor value to determine if the device is connected to an external 'speaker'. There are a range of resistances, for a range of products. This is known as the Connector Pin 21 issue.
Take some windex on a que-tip, or perhaps a Windex paper scrub and rub it on the bottom connector port. Somehow, "something" has gotten on those contacts, and it is pulling the voltage on pin #21 down - so that the iPad "thinks" it's connected to an external speaker - this will disable the internal speaker circuitry, as well as the internal speaker volume controls.
Do not over-saturate and short out your iPad. Do not throw it in the sink, do not use the kitchen faucet to flush it out. A Que-tip with a few drops of Windex (or other gentle cleaner) should work just fine. Takes all of 30 seconds - and magically, the volume knob appeared and everything worked just fine. -
My video has no sound but i want to add the audio using premier pro
My video has no sound but i want to add the audio using premier pro.
when I want to import the file,it said:your video file has no audio.
But i want to add the sound to my video!!
Does anyone know how to solve this problem??So you have a video (.mov) that some how you got from Flash.
It has no sound on it.
Does the .mov import into Premiere?
If it does..you edit it in the timeline (sequence) and add audio to the audio track(s) before exporting it. -
All my sounds have stpped working. Only ringer sound works. When I send video file to someone, they can ear sound. I cant hear it. I have iphone 4s... please help
Just had this occure as you described: ringer only all other sounds mute. The second time this has happened. A simple reboot (turn off and on) restored normal functionality. the first time I read some post but don't remember how I restored it then so I am back here again. Seems like the problem and fix is different for different people, but this time for me a reboot did it.
-
All but one of my iTunes Video's on my laptap lost its sound for some reason. Can anyone suggest a cause and solution.
are you getting that with just some files you convert, or with any files?
this document might help with determining that:
Verifying iTunes video conversion and iPod video syncing using sample QuickTime files -
it goes but without sound
I had the same issue when I tested an H.264 video on the Content Viewer. I went back to my original movie and re-exported my video with AAC audio. When I tested it again in the Content Viewer, the sound worked. I never tested it on an iPad, but I'm assuming this is an issue with the Content Viewer in InDesign.
-
Hello. The Youtube videos I placed in a site made in Muse, don't have sound and don't auto play in my Android phone. Can anyone tell me why? The same video has no problems when I watch it at the youtube site on my phone. It has sound on an iphone, but doesn't auto play either. Thanks!
Hi Mariana,
Please make sure you have the autoplay checkbox selected from the fly-out options:
Regards,
Akshay -
Rt cnbc has no sound, while other videos have sound. Suggestions?
Rt cnbc has no sound, while other videos have sound. Suggestions?
Are the videos that still have sound those in the Videos app, or a different app ? If Videos app then have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound. Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
-
my phone will not vibrate and has no sound to it. therefore I can't listen to music or videos. I've tried turning it off and back on and still nothing.
did you use the mute switch in the side?
-
WHEN I SEND A MESSAGE WITH VIDEO, THE PERSON RECEIVING THE MESSAGE HAS NO SOUND TO THE VIDEO .hOW DO I FIX THE PROBLEM..THANKS
is there sound when you play the video yourself?
-
Recorded video has saturation clicks in sound track
Using my iPhone 4S running latest iOS6. Using the inbuilt camera app in video mode. I recorded a performance art event and all the audio on the video track has clicking sounds throughout which are so loud they have ruined the recording. Looking at the audio waveforms they all appear to be saturated where the clicks happen. There is no way to adjust the gain control using the camera app. Is there any solution or am I going to be unable to record any video in situations where the ambient sound is loud?
My phone is in a LifeProof case, if this makes a difference to the audio saturation.
Should I purchase a separate mini jack microphone?
Any third party video recorder app with gain control you know of?
Thanks,
SteveWell, for what it's worth, I've not had too much success with it myself (otherwise I'd have made some suggestion).
If I have some minor clicks I tend to surgically remove them in editor. It can take ages, so I'd love to know an easier way too!
Quad 2.5 G5. 8 gigs. 250 & 500 gig Internal Drives. G-Tech G-Raid 1 TB Mac OS X (10.4.6) FCP 5.0.4 (FC Studio). Photoshop CS2. Sony HVR-Z1E and HVR-M10E -
My iPhone 4S has no sound when I play music, videos and movies
My iPhone 4S has no sound when I play music, videos and movies
Is the slider all the way to the right??
And no, if your phone is vibrating when you get texts/calls then you're not in Do Not Disturb. You would see a Crescent Moon symbol to the left of Battery % if it was on. -
My iPhone 4S has no sound for videos.
My iPhone 4S has no sound for videos. Only videos though, and no matter the source. I can't hear my own videos I record, videos from YouTube, Facebook, Instagram etc. I'm operating on 7.0.2. No, it's not muted with the side button but I can't figure out why it's not working.
Hi Baileyfour,
Welcome to the Support Communities!
The articles below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
There are two places where vibrations can be set.
One is the Settings > Sounds
The other area is Settings > Notifications
If you have an app set to Alert, it may have a vibration set for it.
iOS: Understanding Notifications
http://support.apple.com/kb/ht3576
Information about Notifications settings can also be found in the iPhone User Guide (pages 131, 132)
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
I hope this information helps ....
Have a great day!
- Judy -
My iPod touch has no sound from music and videos help please
My iPod touch has no sound at all, help please guys.
- The restore from backup
- If still problem restore to factory defaults/new iPod.
- Last, make an appointment at the Genius Bar of an Apple store. -
IPad video to car DVD - has no sound with composite cable
Hi,
I'm trying to watch iPad movies on my in car DVD system. Through a genuine apple composite cable I can get video with out sound. When I connect the USB from the composite I get sound but no video.
Any ideas??
I have iPad 2.
Stereo in car is JVC 846.
ThanksHi,
I do have the same Problem with my F10
I can capture TV with sound, but not either S-Video or FBAS with sound. In ShowBiz I can see, that recording TV I can choose Audio from the built in capture device - no other soudn device. Recording either S-Video or FBAS I can not choose ANY audio recording device. But if I want to record audio, I CAN choose an audio device other than the built in TV-capturing device - namely the audio device.
It seems that trying to capture video via the built in cpturing device, you HAVE TO capture audio from the SAME device - and that using the S-Video or FBAS Input there is no Audio there - and so capturing video from anything else than TV is not possible to combine with audio capturing from an other source.
The only chance is to capture video and audio seperate (one after the other) and mix them together in WinDVD Creator or Showbiz -
Thanx a lot,
Hann
[Edited by: admin on 08-Mar-05 10:43]
Maybe you are looking for
-
Improving performanc​e.
Before i wiped my computer, i was able to get 60 frames or higher all the time in a game called Guild Wars. Since then im lucky to get 30. Ive closed start up programs, and requested help by email and nothing seems to help it. I was told to do memory
-
Date/Time: 2011-12-26 10:40:24.451 -0500 OS Version: 10.4.11 (Build 8S2167) Report Version: 4 Command: Safari Path: /Applications/Safari.app/Contents/MacOS/Safari Parent: WindowServer [374] Version: 4.1.3 (4533.19.4) Build Version:
-
Hi, I've been having issues with my 4s freezing and restarting itself after I updated, so I brought it to an apple store. I was told I have to restore it, and since I didn't have enough space on icloud for a full backup I took it home to do it. I
-
How to apply the filter condition based on other column
HI, i have one requirement. i am giving the example below.my 2 columns data like below Column1 Column2 A 1 B 2 C 3 D 4 E 5 F 6 G 7 H 8 i want to give Column1 as a dashboard prompt and users will enter A,B,...(what are all in the column1). what i want
-
Command that Works in Terminal Not Running as Launch Agent
Trying to run the following command as a Launch Agent (OS X 10.7): /usr/bin/find /Users/username/Documents/Dropbox/Public -type f -mtime +2 -print0 | xargs -0 rm -r Created a plist file (reproduced below) and saved to ~/Library/Launch Agents, but the