My Video is Dark After Exporting from X

Hello,
Does anybody know how to avoid this? I'm hoping to learn how to have a consistent look between what I see in FCP X and what my exports look like. For now, my exports are coming out darker. Any help would be greatly appreciated as I'm trying to share a wedding video I just finished editing.
Thank you!
Trey

Hello Meg The Dog,
I'm viewing it as a quicktime movie. I exported H.264 as I believe it's called a master file. It really doesn't look too bad now that I loo again. However, I noticed the vimeo link I shared to Facebook definitely looked dark. I tried importing the .mov file back into FCP X but the file wouldn't play back.
Trey

Similar Messages

Why does my video become longer after exporting from Flash?

I am a relative novice in Flash and working in CS5. When I test my file, it plays perfectly with the audio I embedded in my timeline. I tried a couple different compressions when exporting into a Quicktime file, but my video which is only 32 seconds long at 30 fps becomes 52 seconds long! The animation slows considerably, and yet the audio I embeded plays perfectly. Any advice as to how I can get it to match the "test movie" option so I can get this bad boy on YouTube?
PLEASE and THANK YOU!

Without knowing the overall innards of the timeline it's hard to suggest a strategy other than those already mentioned. A clean test worked fine so the audio doesn't seem to be the issue.
Can you explain what is "buggy" about the output from the converters? Again, those should only be used if there's code involved to facilitate the animation. They essentially run the SWF and attempt to capture each frame as an image while stitching them together into a video. It's a fairly simple thing to do so it's hard to go wrong unless the hardware on the computer isn't keeping up with the SWF frame rate.
Flash CS6 is not compaible (to my knowledge) with 10.8 so that works to your advantage. Perhaps you can try downloading a trial of Flash CS6 and see if your export issue goes away. It won't solve why CS5 is giving you issues but it does put the power in your hands to export it for now. If it still fails to export that's a pretty convincing argument that a gremlin on the timeline is monkeying around.

Cannot Open Excel File after exporting from Disco Plus

Hi there,
I got a question from one user having issue with opening Excel file after exporting from Disco Plus.
The report has been using for a while and he is using Excel 2003 version and Discoverer 10g(10.1.2.2), he never got this kind of error before, just recently got error.
After exporting from Disco Plus he saved file on his desktop and when he tries to open the excel it says "Cannot be Accessed, can be corrupted...." but this is not from network drive since he saved file on local desktop or C drive.
Also not for all reports, only this particular report and only specific parameter, for example for parameter 2008 Feb opened successfully, but for2009 Feb he gets this error when trying to open excel.
i tried in excel 2007 also , i dont think this is Excel version error, am not sure.
Also after go live last week (we upgraded database from 9i to 10g) but i am not sure this causes ,since for one parameter working, for other parameter not working.
Actually we should get one window for Macro when we try to open excel, but he is not getting it seems.
Any ideas/thoughts on this would be greatly appreciated.
Thanks for your help
--skat

Rod,
Thanks for your quick response on this.
Yes, we can export to other formats as well, but actually exporting is working, after saving the file on our local desktop/drive and when we try to open we get this kind messages or we cannot open the file, we should get message window for Macro to enable/disable but for this report we are not getting this either,
Also this happens only for specific parameters,like i mentioned above it works I mean excel file opens for one set of parameters but for some other set of parameters cannot open.
For example :- when we enter FEB 2008 it works, if we enter FEB 2009 it won't open the file.
This is weird
I am still working on this issue, may be better to recreate the report again might be helpful,
Any ideas/comments/thoughts would be great
Thanks
Skat

PDFs dull in Acrobat after exporting from Indesign - again

Hi folks,
I am aware of a previous post which discussed this issue which was apparently resolved, but it appears to have reared its ugly head again. The problem - since updrading to Mavericks and the Creative Cloud, pdfs in Acrobat are very dull after export from Indesign and it is not a transparency blend or Indesign issue. I understand Adobe blamed Apple for not updating their colour management software and the reply from Adobe was:
"We have found the root cause of this issue and are in process of providing a fix. Once this is done, we will test it to make sure that it works as expected and will release an update patch for all our users."
I am running the latest version or everything but it appears to still be a problem. I have also uninstalled Acobat XI and tried earlier versions without success. I have a print job to send off tomorrow and I am very nervous about how this will print.

Sorry about that, I apparently forgot to attach the file; have done so now.
The method I'm using for creating outlines is simply to use the "Create Outlines" command under the Type menu within InDesign. Then I create my PDF files by using the Export command under the File menu and choosing the PDF/X1a option. 99% of the time I get perfect results, it's only when I try to make outline type that I encounter this problem. You'll clearly see the artifacts in question in the example attached.
I don't know whether or not the press would have printed these artifacts, as you suggest, since no printer has been willing to execute a file that shows any anomaly in the proof process. I can't say that I blame them.
Hopefully you will see what I'm talking about and can recommend a solution, though I like your idea of simply giving them a properly executed file and then telling them to get a life. It hasn't worked so far, as I unfortunately deal with a lot of Neanderthals around here, but I suppose it's worth putting forth again the next time this issue arises. It will.
By the way, no print house of my choosing is this far behind the curve, if at all. These cavemen are always printers who have long-standing relationships with my clients, and for whatever reason (generally lowest cost I'm sure), the clients think they hung the moon. We, of course, no otherwise, but it does it profit a designer to tell his client he or she is crazy for using a printer who is a decade behind the technology curve.
We cowboy up and seek solutions, eh?

Help Needed : Video Glitch after exporting from Premiere Pro CC

Hi all ,
            I have been experiencing this issue for sometime now. I occasionally encounter a video glitch after exporting a video from Premiere Pro CS6 or CC. Sometimes it happens in my NLE timeline , which I have to remove the affected clip that has the glitch/flicker problem from my bin and re-import the clip from my original source, which solves the problem.
             However , the worst part is when the glitch/flicker happens when I have already exported the video when everything seems fine in the timeline of Premiere . My sequence settings do match with the clip . This issue happens intermittently as I always have to hope for the best when the video exports.
Here is an Example of what I mean, the glitch/flicker happens at 3:28 of the music video.
             Hopefully those who have the same issue can share how to troubleshoot this problem . Thank you.
Regards,
Elias Lo

what i did was install final cut pro. I dont have an answer for this but it finish my problem , how i came up with this idea well i have the new mac pro cilinder that looks like a trash can 64gb memory and all the toys to work fast but again the mov files cannot be seen in the desktop cause premiere and mac and windows and all this ******** they fight about , and i also have your problem big time o pn every export.
i have instal final cut onmy older slower imac and i can see everything and the export are perfect
so i just did that and its perfectly fine basicaly final cut does something that makes ur computer and adobe read all kinds of files frames format.   i try to explain this to this adobe premiere enginners but they just say uuuuhhhhh

Quicktime video skips and freezes after exporting from FCP

I have tried exporting from Final Cut a few different ways, but my QT file had short skips and freezes in the video (the audio is perfect).
I have done this same thing several time with no problems at all. What am I doing wrong?

DETAILS
What are you exporting?
How are you exporting... QT Movie, Conversion, what settings?
What drive are you exporting to?
What version of FCP and QT?

Video not playing after exporting to Epub or pdf

Really need some help here!
I was making an ebook project with Indesign CS6 and was planning on putting some interactive videos which can be played in the ebook. However, after I've followed all the instructions online for placing video content into indesign and export as either interactive pdf or Epub format, the video I placed cannot be played and not even showing on Epub file.
Could someone help me to solve this kind of situation? Is there any setting I should make and I did not for exporting interactive video content?
Thanks

Thanks for replying.
1) The video I placed was in mp4 format.
2) On Media panel, I checked Option: "Play on Page Load" ,
                                            Poster: "From Current Frame" ,
                                        Controller: "SkinOverAll"
                                           "Show Controller on Rollover"
It worked fine on preview mode.
Now that I know Adobe Digital Edition doesn't preview video, and when I exported as interactive PDF format, the video frame cannot be clicked or played.
3) I was trying to export as EPUB3 and interactive PDF format
4) I was using Adobe Digital Editions and I did not know it doesn't preview video.

Lower 3rd (in Animation Codec mills +) is darker after exporting to QT?

Hello
My After Effects lower 3rd (Animation Codec mills +) is darker over video after exporting to QT movie? It only looks darker in the areas where the lower 3rds are layered over the video on the final exported QT. But, this doesn't show up in FCP; it looks perfect in the canvas during playback. So I'm not sure what's happening.
Any help would be lovely. Thanks.

Can anyone spot the error in what I'm doing? It's got to be something simple. I've created a time-lapse using these steps (I think) before, so I don't think there's a bug in the program anywhere. Any help appreciated.
Not exactly an error, but I do have a question. If you are sourcing JPEG images to an image sequence file which creates a QT Photo JPEG compression file which is already import/edit compatible with iMovie and currently plays in the QT 7 Player correctly without a "black screen" problem, why are you exporting the data to the AIC compression format instead of simply saving the Photo JPEG sequence file and importing it directly to iMovie?

Audio falls out of sync with FCP sequence after export from STP

Hey all,
editing sound on a short film. sent FCP sequence to sweeten the dialog and add effects, according to the timeline it is the same length as sequence length in
FCP, but when exporting from STP to FCP to complete movie, the sound ends up being about 10 frames longer than the video and starts in sync and falls out of sync over the duration of the film.
Have tried changing preference settings in STP, exported about 5 ways to breakfast and all have same result.
Anyone have a solution to this problem?
Much thanks,
Holly

I just experienced this same thing, and as Christof says, it had to do with 'Easy Setup' and 'all formats'. I've been editing a picture shot on RED in Apple ProRes 422 (HQ) at 2K (2048 x 1152) and 24fps...FCS 3 (FCP 7 latest version). Whenever you trash preferences or start up FCP new, you get the 'easy setup' menu. Previously, I could just hit 'okay' and go ahead into FCP and change the settings/resolutions within the project...even if the 'easy setup' default was, say, DV/NTSC 29.97. Also, when opening up an active project after trashing prefs, the project itself would still have the same editing/playback settings/resolutions, even if the 'easy setup' window had its default DV/NTSC setting. Plus, if you create a new timeline and its default is one format, once you drop a different format into it, it asks you if it should adjust to that format anyway, and of course, you say yes and everything is fine.
Well....in this most recent FCP update, whenever I'd export an AIFF from the timeline and reimport....or if I'd just import an AIFF...it would do something to the playback rate of that newly imported/reimported sound file and suddenly its sync has drifted all over the place within just a minute or so. But strangely, it wouldn't do it to audio that's attached to picture (.mov/MP4/etc.)....only isolated audio files (AIFF/WAV). So naturally, I wondered if something was going on during the export process or the like.
The solution is to make sure that when you open FCP (newly, or after trashing prefs), make sure you pick the settings/format/framerate in that 'Easy Setup' window that matches what you intend to edit as closely as possible. In my case, the format is Apple ProRes 422 (HQ), 2048 x 1152 @ 24fps, and I use a Blackmagic Multibridge so I have settings for it. Hence......*Format; HD, Frame Rate: 24, Use: Blackmagic HDTV 1080P 24 - 10 bit.* Whereas the default upon startup is....Format: (all formats), Frame Rate: 29.97, Use: DV/NTSC 48KHz.
You can also set these in the 'Audio Video Settings' menu. Now, whenever I export and reimport an AIFF, or just import an AIFF (like the soundmix prepared by our sound designer), sync stays and there's no drift. So make sure you've picked the right settings when starting or reopening a project, again as Christof pointed out.

Film looks poor after exporting from prem pro 5

Hi
My film seems to lose quality (looks like it is dropping frames, picture seems to pixelate slightly in places) after I have exported from prem pro. I have tried messing with the settings but it still seems to lose a signifcant amount of quality.
I want to export to AVI.
Any tips?
Thanks

OK... here are specific questions... answer them all and someone will be able to help
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
More information needed for someone to help http://forums.adobe.com/thread/416679
Some is general about your computer and OS, some is specific to video editing
Build a Configuration file http://www.piriform.com/speccy
Brand/Model Computer (or Brand/Model Motherboard if self-built)
How much system memory you have installed, such as 2Gig or ???
Operating System version, such as Win7 64bit Pro... or whatevevr
-including your security settings, such as are YOU the Administrator
-and have you tried to RIGHT click the program Icon and then select
-the Run as Administrator option (for Windows, not sure about Mac)
Your Firewall settings and brand of anti-virus are you running
Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
-or the brand/model graphics chip if on the motherboard
-and the exact driver version for the above graphics card/chip
-and how much video memory you have on your graphics card
Brand/Model sound card, or sound "chip" name on Motherboard
-and the exact driver version for the above sound card/chip
Size(s) and configuration of your hard drive(s)... example below
-and how much FREE space is available on each drive (in Windows
-you RIGHT click the drive letter while using Windows Explorer
-and then select the Properties option to see used/free space)
Windows Indexing is BAD http://forums.adobe.com/thread/676303
While in Properties, be sure you have drive indexing set OFF
-for the drive, and for all directories, to improve performance
Some/Much of the above are available by going to the Windows
Control Panel and then the Hardware option (Win7 option name)
OR Control Panel--System--Hardware Tab--Device Manager for WinXP
And the EXACT type and size of file that is causing you problems
-for pictures, that includes the camera used and the pixel dimensions
Plus Video-Specific Information http://forums.adobe.com/thread/459220
Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549
Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
Read Hunt on Using MOD/TOD files http://forums.adobe.com/thread/699990
Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
Also read file troubleshooting http://kb2.adobe.com/cps/407/kb407928.html

Help with exporting. Video looks horrible after export, but great when in premiere pro

Hey guys, looking for some advice on exporting.
When I finish a video, the color and everything looks great while in premiere pro, but after exporting it, the color ends up looking dull and the whole video looks blurry. I'm filming with a canon vixia hf200 at 60i. It imports as a AVCHD file, I deinterlace it, and then export at the Vimeo HD settings. What can be causing the video to look horrible after exporting? What settings should I be exporting under? Any help would be appreciated!

It looks like you're coming up against some of the colorspace handling issues that the Premiere pipeline has.
Since your source is 60i AVCHD it's HD and thus rec709 colorspace. If it gets encoded with the standard rec601 colorspace (SD sizes are this) then all the colors get crushed. Look for a "709" and "601" radio button in your export settings. If it's not there you're out of luck.
The "blurry" is probably a poor quality de-interlacer. If Vimeo permits interlaced vs progressive do that instead. it's always cleaner to stay in the same video format all the way through.
TECHNICAL ASIDE:
rec709 is a triangle of possible colors that can be expressed by mixing of ratios of 3 emitters (the R G B corners of the triangle). (they are the RGB phosphors of a CRT and now LCD pixel elements)
rec709 is a bigger triangle than rec601 so it's capable of more colors. but if you accidently map that triangle's corners to the coordinates of rec601 it gets crushed.
In photography the "sRGB" uses the rec709 triangle. A bigger triangle that that is "Adobe RGB". So if you work in Adobe RGB and export to sRGB without conversion the colors get crushed because sRGB in inside the triangle of "Adobe RGB".
http://en.wikipedia.org/wiki/Srgb
http://en.wikipedia.org/wiki/Rec._709
http://upload.wikimedia.org/wikipedia/commons/8/8f/CIExy1931_sRGB.svg

Black flashes appear every 2 seconds after exporting from final cut pro

http://www.youtube.com/watch?v=b8jJNnk4s3g here is my video as an example of what is happening. It only shows up after exporting and on the original AVI footage, and not my outro footage which was a .mov.
Please can somebody help me figure out what is wrong with it as it is happening with every video I try to make using the AVI filed my camcorder records in.

AVI is not a supported wrapper in FCP (and who knows what's the codec)
You probably should convert the material to an natively editable format before you bring it in to FCP. Mpeg Streamclip is a good app for this purpose. What format you convert to depends on the size and framerate of the original media.
x

No Hyperlink in PDF after export from Crystal Reports 2008 SP2

When I export a report from Crystal Reports 2008 Developer (as well as from the runtime) SP2 to PDF the Hyperlink to a file on hard disk is missing.

Hi,
Go through this LInk
Re: No hyperlinks after exporting to pdf
Regards,
Salah

Why do my pictures become blurry after exporting from lightroom 5?

My pictures become somewhat blurry or not as sharp after I export them from lightroom 5. PLEASE HELP!!!

If you are looking at your exported pictures in preview.app than that is the culprit. It uses an extremely poor downscaling algorithm for displaying large images and will make every large image, no matter how sharp originally, display blurry. In preview you can hit command-0 (that's a zero) to make the image display 1:1 to see the actual detail. Make sure you have it's preferences in the images panel set to "Define 100% scale as 1 image pixel equals 1 screen pixel". I think in older Mac OS X versions, it was called something like ignore image dpi for display or so but I don't remember. You can also make sure to downscale (with correct output sharpening in the export panel) upon export from Lightroom. If the exported image is smaller than the display, Preview should display 1:1 by default upon opening.

Saving PSD files after exporting from Lightroom saves incorrectly

I've only recently moved to Lightroom from using Photoshop/Bridge together, so I'm not 100% sure how saving files exported from Lightroom should go. But here's what I experience:
Base edit of file within Lightroom
In library view, right click on image -> Edit in -> Open as Smart Object in Photoshop
Perform all my necessary edits and such
File -> Save As, and save it to another location as a PSD file (totally different HDD)
Perform more edits....
Shortcut CTRL+S to save, and it saves it as the TIFF file under the location it was originally in within Lightroom
Eh...? Am I missing something. It should just save as the original PSD I created when I went "Save As". I have seen on a few occasions, immediately after "Save As", the file name resorts back to TIFF and not as PSD.
My settings for External Editing in Lightroom are as follows:
File Format: TIFF
Color Space: ProPhoto RGB
Bit Depth: 16 bits/component
Resolution: 300
Compression: None
Does anyone have any ideas what I'm doing wrong? Also, to note, that sometimes I double click on the Smart Object within Photoshop to load Camera Raw and perform some edits, but not often.

Modesto Vega wrote:
Replying to your last 3 posts.
Re Camera Raw being used to pass an image to Photoshop
a) I am assuming this is independent of the Compatibility level in Preferences\File Handling DNG creation.
b) Does the same apply to other photo editing software made by Adobe like Elements?.
Reply: Yes, the principle is the same. Photoshop Elements cannot read raw data either. That's why it has to be converted before it's opened.
c) Assume that I have LR 5.7.1 and CS5. Is Camera Raw is still used to pass an image to Photoshop? If so, why is there a need to get LR to behave differently?
Reply: Camera Raw is used IF you choose the option to open anyway. Then Camera Raw will be used to convert the image that's opened in Photoshop. But since it is older than Lightroom some of the new adjustments might not be transferred to Photoshop. That's why there is a need to let the user make the choice.
d) Sometimes it does seem as if Adobe might be using Camera Raw updates and process version updates to get consumers to change their habits, this includes having to buy subscriptions or having to change workflow to some ideal that somebody at Adobe or working with Adobe might have in mind.
Reply: The fact is that in the past, when a new version of Photoshop is released then all support and updates cease for the previous version. Since the introduction of the creative cloud, at least users of Photoshop CS6 get support for new cameras. They just don't get the new features. Yes, there's motivation to upgrade. Adobe is a business. What do you really expect?
Re stacks
I find impossible to see collapsed stacks on the film strip. Stacks are only visible on the Library module and using a grid view; I don't say clearly visible because they are only recognisable by the label at the top left corner with the image count; I don't even think it is possible to change the colour of that label or the grey colour surrounding an image. Also I cannot name stacks. If I could name stacks, see them as virtual folders underneath a library folder and make them glaringly visible I would use them extensively.
Reply: The only reason I can think of that you are unable to see collapsed stacks on the filmstrip is if you have the filmstrip reduced in size to the point that Lightroom can't display all the icons. I'm able to see the collapsed stacks in the library grid view and on my filmstrip
Re storing your Raw files and processed files in separate locations
Assuming Raw files are negatives and Photoshop files are transparencies or prints, would you want negatives being handled/read on a regular basis? If anything happens to your negatives, you would never be able to produce another print or another transparency again.
Reply: The raw files or the negatives, as you put it, are never modified by Lightroom. They always remain in their pristine state they were in when they were imported. If I have a backup of that raw file then I can do whatever I want to the one in my working folder. Resetting that raw file so that it looks unaltered is just a click away.
I have worked extensively with databases and database systems, it is a standard feature of database systems to be able to choose where to store different database objects. I don't see why LR cannot do the same, it is a database after all. I do agree with both the OP and photo.
Reply: Well, I won't argue that point. If that's what you really want than lobby for it. It just won't get my vote because I don't see any real advantage.
If you read back through this quoted message you'll find that my replies are included. I don't know how to separate them out so they are highlighted properly. Read through it and think about it. But personally, I don't want to waste anymore time on this discussion because it isn't accomplishing anything in my opinion.

My Video is Dark After Exporting from X

Similar Messages

Maybe you are looking for