My video is streaming through every program as being very dark?

After using photobooth for about 5 minutes, I went to set a picture I had taken as my account picture. When it switched to system preferences, it showed the picture being set as my account picture. When I went back to photobooth, the picture was suddenly very dark. Any help? I've tried most everything I can think of.

Hi,
If the original video card fan has not been operating properly the video card may have overheated. Besides, it's pretty old. Flickering and banding are symptoms of a video card in distress or impending failure.
But first, follow the advice you've been given, test the Monitor.
If you decide it is the video card, forget replacing the fan, just but another card. There are many available on Fleabay. The video card is easy to replace, see this:
http://docs.info.apple.com/article.html?artnum=75312
Tell us what happens.
Regards,
Dave

Similar Messages

Video on streaming - Macbook pro very slow

Hello. I have a problem with my macbook pro (version 10.6.8) for a week : when I watch video on streaming online my all computer go very slowly.
What can I do to fix it?
Thank you for the help!

Maybe

Mplayer and multiptle simultaneous video streams through xv

While I was using nvidia drivers a while back, I could playback multiple simultaneous video streams through xv in mplayer without any problem. After recent change of video card and consequential move to open source radeon drivers, I've observed that I can play upmost one stream with gmplayer (it spits out an error about problems with opening the selected video out device - I can playback more files simultaneously using basic mplayer, although it spits the same error in console with every successive instance). Could someone enlighten me whether it's a standard behaviour of xv with radeon driver or maybe the problem lies elsewhere and it's omittable somehow?

Tried it, but to the same result
What I found out is that the user can play videos from console with framebuffer at least. Not that it helps..

How can I move someone's hair from one photo to another and place it on another person? I have gone through every instructional video you have and have not been able to master this

How can I move someone's hair from one photo to another and place it on another person? I have gone through every instructional video you have and have not been able to master this

Open picture B, the one you wish to select the hair from to add to the picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the hair. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the hair to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position the hair from picture B.
In the layers palette you should see picture A as the background layer, and the hair (B) on a separate layer.

I recently purchased a movie (Prometheus) on my computer through iTunes and every time I try to put it on my iPhone, it fails. How can I successfully sync this video? Mind you, every other file syncs flawlessly.

I recently purchased a movie (Prometheus) on my computer through iTunes and every time I try to put it on my iPhone, it fails. How can I successfully sync this video? Mind you, every other file syncs flawlessly.

Can you connect to a wifi source on the device? Enable wifi in settings on the device itself. If you don't have wifi at home, there may be a local hotspot you can use for this.
The reason this happens is carriers don't want people downloading huge files that would slow their network as well as eat up your data plan.

TS1846 I have edited a movie in Final Cut Pro and the video has been smoot all the time. Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies. What is wrong? Sudd

I have edited a movie in Final Cut Pro and the video has been smooth all the time.
Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies.
What is wrong? All the sudden.

We need info, info, info!
What version of FCP X?
Did you render? what are the project specs? do you use many compound clips? how much ram, hard drive space, how is the hard drive connected?
It looks like your mac can't keep up. Maybe the bottleneck is the hard drive, or something else.
Try exporting a master file and see if the video is ok.
Also, keep Activity Monitor open and see how much memory pressure you've got.

My ipad streaming purchased video from itunes stops every few seconds. does not happen with any other streaming video service.

my ipad streaming purchased video from itunes stops every few seconds. This does not happen with any other streaming video service. I have restarted and rebooted already.

I've tried both things, but video still stutters.. Have also tried removing profile, and complete reinstall of firefox.
I'm on 24 Mbit cable and the only user atm. IE and Chrome seems to work without stuttering.
I've having this stuttering every ~5th second, like a small "1/4 sec buffering".

Does anyone know a work around to broadcast live (in real time) via video stream through a BC website?

Does anyone know a work around to broadcast live (in real time) via video stream through a BC website?
~Leritha

There is no work around. You would look to use a service, like Twitch, you get a embed code for the live stream, you put that on a page and away you go. All depends on the service your using.

HT204291 Since downloading 8.1.3 onto my iPad, video streaming through my Apple TV freezes after a few minutes whilst audio continues as usual. Anyone experienced this and if so, is there a fix?

Since downloading 8.1.3 onto my iPad, video streaming through my Apple TV freezes after a few minutes whilst audio continues as usual. Anyone experienced this and if so, is there a fix?

8.2 is out...perhaps that will address your problem.
Barry

My mac book pro is struggling to run streamed video, ie bbc i tv programs, can anyone help please

my mac book pro is struggling to run streamed video, ie bbc i tv programs, can anyone help please

Yes, it seems therer was a problem with my internet connection, check with Sky, they have adjusted my settings and its back working perfect, watched bbc i this morning, many thanks

Live streaming to Ustream or other streaming sites or programs w/MacBook

I have a brand new MacBook. USB only no firewire. I need to be able to stream LIVE video to Ustream or programs like it. I have gone back and forth about various adapters (usb to component/svideo) that capture video. Some only work within the software. Ustream, quicktime, imovie still cant see my camera (formerlly used thru firewire)
Does anyone have a solution OR knowledge of a working adapter that all video programs can see in the MacBook. I have considered purchasing a USB camera or selling the macbook and getting a MacBook Pro a LAST resort.

One step closer:
Changed the crossdomain.xml file (more permissive settings).
Changed the encoding on FMLE to vp6. Working somewhat (don't know what I did to make it start streaming through hds).
But at least now I can get the individual streams in the set manifest file to work:
http://localhost/hds-live/livepkgr/_definst_/livevent/livestream1.f4m
http://localhost/hds-live/livepkgr/_definst_/livevent/livestream2.f4m
http://localhost/hds-live/livepkgr/_definst_/livevent/livestream3.f4m
BUT when I try to play the streams through the set manifest file from http://localhost/liveevent.f4m I'm getting the following error:
"The F4m document contains errors URL missing from Media tag." I'll search the forums to see if anyone else has come across this problem.
I used the f4m config tool to make the file. These are the file's contents:
<manifest xmlns="http://ns.adobe.com/f4m/2.0">
<baseURL>http://localhost/hds-live/livepkgr/_definst_/liveevent/</baseURL>
<media href="livestream1.f4m " bitrate="200"/>
<media href="livestream2.f4m " bitrate="500"/>
<media href="livestream3.f4m " bitrate="1000"/>
</manifest>
Thanks

How do I use multiple cameras to live stream through FME?

I am looking to live stream pool tournaments from multiple angles but don't know what software or hardware I might need. Anybody have any good how to advice or links they might share? I stream through Ustream.tv if that makes a difference. Should I look for something different? Thanks

I am working on getting just the counter working by using
the program posted previously, and I am running into issues. Periodically I get
the error:
Error -200141
occurred at DAQmx Read (Counter DBL 1Chan 1Samp).vi
Possible reason(s):
Data was overwritten
before it could be read by the system.
If Data Transfer
Mechanism is Interrupts, try using DMA. Otherwise, divide the input signal
before taking the measurement.
It seems to work better if I use cascaded counters, but I need timer 0 for
analog channels when I run this code along with the program for the other
measurements.
I have tried averaging, and selecting different values for the millisecond
timer, and these did not seem to have an effect.
I tried different DAQms configurations and "Counter DBL 1Samp" seemed
to work the best.
The program will work for a while and then it will give me the above error
message.
If I use counter 0 as a cascaded counter input, the program runs fine. If I run
this with other analog channels, it errors out because the analog channels use
counter 0.
If I use counter 1 as a cascaded counter input, it seems to work better than a
single channel, but it will still error out with the above error.
If I use only counter 1, I get the error above even faster.
Also, none of the
configurations give measurements outside the While Loop.
The only place I can add a speed dial for the front panel is within the While
Loop.
Is there someway to get the signal to continuously send out of the while loop?
I thought if I could get the signal out of the while loop, I could condition it
anyway I wanted without the program erroring out.
Any suggestions would be much appreciated.
Thank you.
Attachments:
Counter_error.jpg ‏45 KB

As soon as video touches my Source or Program windows the Mac Pro (3,1) shuts down

Linc,
You keep showing up when I search for this problem so I hope you can help.
I'm having the same issue in Premiere and Media Encoder (but not After Effects). My Mac just restarts itself as soon as video is loaded. I can start Premiere and open a project and go through relinking media, but as soon as video touches my Source or Program windows the Mac Pro (3,1) shuts down.
I've fixed the problem temporarily two times. The first time I was troubleshooting what was wrong and wound up putting in my old video card and after that fixed the problem, I switched back to my GTX 680. I also did a driver update. After doing that I was ok for a few days so I figured it was a driver thing or maybe the card just needed to be reseated. Then when it started acting up again I figured something was going on.
So I started searching again and came across one of your posts that recommended removing CUDA. I did that and it worked perfectly for a week until about 20 minutes ago. Crashed in the middle of an edit and now each time I restart Premiere it crashes as soon as video touches my monitors.
I found this post because I specifically searched for "com.nvidia.web.NVDAResmanWeb(8.2.7)" from my Problem Report.
Any thoughts?
Thanks,
Darren
Fri Jan 16 14:43:42 2015
panic(cpu 5 caller 0xffffff7f999066a4): NVRM[0/4:0:0]: Read Error 0x00002100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x8a000000 0xffffff827e13b000 0x0e4000a2, D0, P2/4
Backtrace (CPU 5), Frame : Return Address
0xffffff82776cbbe0 : 0xffffff8018c22f79
0xffffff82776cbc60 : 0xffffff7f999066a4
0xffffff82776cbd20 : 0xffffff7f999e0774
0xffffff82776cbd70 : 0xffffff7f99c1605d
0xffffff82776cbdc0 : 0xffffff7f99c4ea83
0xffffff82776cbe20 : 0xffffff7f99a05b8f
0xffffff82776cbe40 : 0xffffff7f9990ca2d
0xffffff82776cbef0 : 0xffffff80190b0a20
0xffffff82776cbf30 : 0xffffff80190af4c2
0xffffff82776cbf80 : 0xffffff80190af597
0xffffff82776cbfb0 : 0xffffff8018cd7607
      Kernel Extensions in backtrace:
         com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f998b1000->0xffffff7f99b5cfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f992bf000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9989b000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f993a3000
            dependency: com.apple.AppleGraphicsDeviceControl(3.6.22)[91D61DEC-2946-3790-8134-B808C016C4 C9]@0xffffff7f998ab000
         com.nvidia.web.NVDAGK100HalWeb(8.2.7)[E7D6DD93-319A-39C6-AE77-19D08D903496]@0xf fffff7f99b6c000->0xffffff7f99d36fff
            dependency: com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f998b1000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f992bf000
BSD process name corresponding to current thread: kernel_task
Boot args: nvda_drv=1
Mac OS version:
13F34
<Re-Titled By Host>

Thanks for the reply. Sorry for the shortened log. Here's the full thing. By the way, where do you learn to read these things? Are there keywords like "error" that you just learn to look for or is it something for in depth?
Thanks,
Darren
Mon Jan 19 08:02:40 2015
panic(cpu 5 caller 0xffffff7f9cd066a4): NVRM[0/4:0:0]: Read Error 0x00504610: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x8a000000 0xffffff82813fc000 0x0e4000a2, D0, P2/4
Backtrace (CPU 5), Frame : Return Address
0xffffff82927dbaa0 : 0xffffff801c022f79
0xffffff82927dbb20 : 0xffffff7f9cd066a4
0xffffff82927dbbe0 : 0xffffff7f9cde0774
0xffffff82927dbc30 : 0xffffff7f9d03e562
0xffffff82927dbc50 : 0xffffff7f9d015a35
0xffffff82927dbd10 : 0xffffff7f9d015e05
0xffffff82927dbd70 : 0xffffff7f9d016096
0xffffff82927dbdc0 : 0xffffff7f9d04ea83
0xffffff82927dbe20 : 0xffffff7f9ce05b8f
0xffffff82927dbe40 : 0xffffff7f9cd0ca2d
0xffffff82927dbef0 : 0xffffff801c4b0a20
0xffffff82927dbf30 : 0xffffff801c4af4c2
0xffffff82927dbf80 : 0xffffff801c4af597
0xffffff82927dbfb0 : 0xffffff801c0d7607
      Kernel Extensions in backtrace:
         com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f9ccb1000->0xffffff7f9cf5cfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9c6bf000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9cc9b000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9c7a3000
            dependency: com.apple.AppleGraphicsDeviceControl(3.6.22)[91D61DEC-2946-3790-8134-B808C016C4 C9]@0xffffff7f9ccab000
         com.nvidia.web.NVDAGK100HalWeb(8.2.7)[E7D6DD93-319A-39C6-AE77-19D08D903496]@0xf fffff7f9cf6c000->0xffffff7f9d136fff
            dependency: com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f9ccb1000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9c6bf000
BSD process name corresponding to current thread: kernel_task
Boot args: nvda_drv=1
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide:     0x000000001be00000
Kernel text base: 0xffffff801c000000
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 234985677156509
last loaded kext at 1019554175070: com.apple.filesystems.smbfs 2.0.3 (addr 0xffffff7f9e577000, size 335872)
last unloaded kext at 421976737662: com.apple.driver.AppleFileSystemDriver 3.0.1 (addr 0xffffff7f9e428000, size 8192)
loaded kexts:
com.nvidia.web.GeForceWeb 8.2.7
com.nvidia.web.NVDAGK100HalWeb 8.2.7
com.nvidia.web.NVDAResmanWeb 8.2.7
com.blackmagic-design.desktopvideo.iokit.driver 10.3.1
com.blackmagic-design.desktopvideo.iokit.framebufferdriver 10.3
com.ATTO.driver.ATTOExpressPCIUl4 4.4.1
com.apple.filesystems.smbfs 2.0.3
com.apple.filesystems.afpfs 11.1
com.apple.nke.asp-tcp 8.0.1
com.apple.filesystems.msdosfs 1.9
com.apple.filesystems.ntfs 3.11
com.apple.iokit.CSRBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleUSBDisplays 360.8.14
com.apple.driver.Oxford_Semi 3.4.1
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.iokit.SCSITaskUserClient 3.6.7
com.apple.driver.XsanFilter 404
com.apple.driver.AppleIntel8254XEthernet 3.1.4b1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AirPortBrcm43224 700.36.24
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleUSBUHCI 656.4.1
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.security.SecureRemotePassword 1.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleUSBHIDKeyboard 170.15
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBAudio 2.9.5f8
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.5.1
com.apple.iokit.IOFireWireSBP2 4.2.6
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.7
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.iokit.IOAcceleratorFamily 98.23
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleSMC 3.1.8
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.7
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOSCSIParallelFamily 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOATAFamily 2.5.2
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
System Profile:
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 3 GHz, 20 GB, SMC 1.25f4
Graphics: NVIDIA GeForce GTX 680, NVIDIA GeForce GTX 680, PCIe, 2048 MB
Memory Module: DIMM Riser B/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser B/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.2.7f3 14616, 3 services, 14 devices, 1 incoming serial ports
Network Service: Ethernet 2, Ethernet, en1
Network Service: Ethernet 1, Ethernet, en0
PCI Card: NVIDIA GeForce GTX 680, Display Controller, Slot-1
PCI Card: NVIDIA GeForce GTX 680, NVDA,Parent, Slot-1
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,0
PCI Card: DeckLink HD Extreme 2, Video, Slot-4
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,1
Serial ATA Device: OWC Mercury EXTREME Pro 6G SSD, 480.1 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Parallel ATA Device: PIONEER DVD-RW DVR-112D
Parallel ATA Device: PIONEER DVD-RW DVR-112D
SCSI Device: SCSI Target Device @ 0
SCSI Device: SCSI Target Device @ 0
USB Device: Hub
USB Device: Keyboard Hub
USB Device: Microsoft Wireless Optical Mouse® 1.00
USB Device: Apple Keyboard
USB Device: USB 2.0 FD
USB Device: Apple Cinema HD Display
USB Device: USB2.0 Hub
USB Device: External
USB Device: NS1068
USB Device: NS1068
USB Device: Hub
USB Device: FCR-HS219/1 Mobile Reader
USB Device: Live! Cam Connect HD VF0750
USB Device: Apple Cinema HD Display
USB Device: Elements 10B8
USB Device: External USB 3.0
USB Device: Bluetooth USB Host Controller
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: unknown_device, OWC Mercury Elite-AL Pro, Up to 400 Mb/sec
Thunderbolt Bus:
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 3 GHz, 20 GB, SMC 1.25f4
Graphics: NVIDIA GeForce GTX 680, NVIDIA GeForce GTX 680, PCIe, 2048 MB
Memory Module: DIMM Riser B/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser B/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.2.7f3 14616, 3 services, 14 devices, 1 incoming serial ports
Network Service: Ethernet 2, Ethernet, en1
Network Service: Ethernet 1, Ethernet, en0
PCI Card: NVIDIA GeForce GTX 680, Display Controller, Slot-1
PCI Card: NVIDIA GeForce GTX 680, NVDA,Parent, Slot-1
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,0
PCI Card: DeckLink HD Extreme 2, Video, Slot-4
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,1
Serial ATA Device: OWC Mercury EXTREME Pro 6G SSD, 480.1 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Parallel ATA Device: PIONEER DVD-RW DVR-112D
Parallel ATA Device: PIONEER DVD-RW DVR-112D
SCSI Device: SCSI Target Device @ 0
SCSI Device: SCSI Target Device @ 0
USB Device: Hub
USB Device: Keyboard Hub
USB Device: Microsoft Wireless Optical Mouse® 1.00
USB Device: Apple Keyboard
USB Device: USB 2.0 FD
USB Device: Apple Cinema HD Display
USB Device: USB2.0 Hub
USB Device: External
USB Device: NS1068
USB Device: NS1068
USB Device: Hub
USB Device: FCR-HS219/1 Mobile Reader
USB Device: Live! Cam Connect HD VF0750
USB Device: Apple Cinema HD Display
USB Device: Elements 10B8
USB Device: External USB 3.0
USB Device: Bluetooth USB Host Controller
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: unknown_device, OWC Mercury Elite-AL Pro, Up to 400 Mb/sec
Thunderbolt Bus:

How to send sms through java program?

hi,
i am trying to send sms through java program.i am usining ubuntu 6.04.i am using modem MC35i.i use the jSMSEnjine.jar and rxtxcomm.jar.
these are the following program.
import org.jsmsengine.*;
import java.util.*;
class SendMessage
     public static void main(String[] args)
          int status;
          // Create jSMSEngine service.
     CService srv = new CService("Com2",9600);
          //CService srv = new CService("COM2",9600);
          System.out.println();
          System.out.println("SendMessage(): sample application.");
          System.out.println(" Using " + srv._name + " " + srv._version);
          System.out.println();
          try
               //     Initialize service.
               srv.initialize();
               Thread thread =Thread.currentThread();
               thread.sleep(1000);
               System.out.println(srv);
               //     Set the cache directory.
               srv.setCacheDir(".\\");
               //     Set the phonebook.
               //     srv.setPhoneBook("../misc/phonebook.xml");
               //     Connect to GSM device.
               status = srv.connect();
               //     Did we connect ok?
               int st=CService.ERR_OK;
               System.out.println(st);
               System.out.println(status);
               if (status == CService.ERR_OK)
                    //     Set the operation mode to PDU - default is ASCII.
                    srv.setOperationMode(CService.MODE_PDU);
                    // Set the SMSC number (set to default).
                    srv.setSmscNumber("");
                    //     Print out GSM device info...
                    System.out.println("Mobile Device Information: ");
                    System.out.println("     Manufacturer : " + srv.getDeviceInfo().getManufacturer());
                    System.out.println("     Model : " + srv.getDeviceInfo().getModel());
                    System.out.println("     Serial No : " + srv.getDeviceInfo().getSerialNo());
                    System.out.println("     IMSI : " + srv.getDeviceInfo().getImsi());
                    System.out.println("     S/W Version : " + srv.getDeviceInfo().getSwVersion());
                    System.out.println("     Battery Level : " + srv.getDeviceInfo().getBatteryLevel() + "%");
                    System.out.println("     Signal Level : " + srv.getDeviceInfo().getSignalLevel() + "%");
                    //     Create a COutgoingMessage object and dispatch it.
                    //     *** Please update the phone number with one of your choice ***
// String smsLengthTest="Hi"+"\nTesting is going on.Test for sending unlimited number of charecter.So you will get N number of SMS.Initially I trancate the whole string by 70 charecter.Later I will put it upto 90 charecter.Some chararecter should kept for header portion.I don't know the total number.It is just test.If you got the sms u should appreciate me...This is Ripon...I have written sms program";
String smsLengthTest="Hi\n"+"This is Govindo";
int mao=smsLengthTest.length();
System.out.println("Length of sms :"+mao);
String smsNo="9433314095";
smsNo="+91"+smsNo;
if(mao<70)
COutgoingMessage msg = new COutgoingMessage(smsNo,smsLengthTest);
//     Character set is 7bit by default - lets make it UNICODE :)
//     We can do this, because we are in PDU mode (look at line 63). When in ASCII mode,
//          this does not make ANY difference...
msg.setMessageEncoding(CMessage.MESSAGE_ENCODING_UNICODE);
if (srv.sendMessage(msg) == CService.ERR_OK) System.out.println("Message Sent!");
else System.out.println("Message Failed!");
else
// COutgoingMessage msg = new COutgoingMessage(smsNo,smsLengthTest);
// LinkedList messageList;
// messageList = new LinkedList();
// messageList.add(msg);
// LinkedList maooo=new LinkedList();
// maooo=srv.splitLargeMessages(messageList);
int sizelength=0;
int counter=0;
sizelength=smsLengthTest.length();
System.out.println("SMS length :"+sizelength);
int smsCntr=sizelength/70;
System.out.println("smsCntr :"+smsCntr);
counter=smsCntr+1;
int j=70;
int k=0;
try
for(int i=0;i<smsCntr;i++)
String test="";
test=test+i;
test=smsLengthTest.substring(k,j);
System.out.println(test);
System.out.println(test.length());
COutgoingMessage msg = new COutgoingMessage(smsNo, test);
System.out.println("hi this is suman" + smsNo);
//     Character set is 7bit by default - lets make it UNICODE :)
//     We can do this, because we are in PDU mode (look at line 63). When in ASCII mode,
//          this does not make ANY difference...
msg.setMessageEncoding(CMessage.MESSAGE_ENCODING_UNICODE);
if (srv.sendMessage(msg) == CService.ERR_OK) System.out.println("Message Sent!");
else System.out.println("Message Failed!");
k=k+70;
j=j+70;
catch(Exception e)
System.out.println("Error...1");
e.printStackTrace();
e.getMessage();
String lastPortion=smsLengthTest.substring(k);
System.out.println(lastPortion);
COutgoingMessage msg = new COutgoingMessage(smsNo, lastPortion);
//     Character set is 7bit by default - lets make it UNICODE :)
//     We can do this, because we are in PDU mode (look at line 63). When in ASCII mode,
//          this does not make ANY difference...
msg.setMessageEncoding(CMessage.MESSAGE_ENCODING_UNICODE);
if (srv.sendMessage(msg) == CService.ERR_OK) System.out.println("Message Sent!");
else System.out.println("Message Failed!");
                    // Disconnect from GSM device.
                    srv.disconnect();
               else System.out.println("Connection to mobile failed, error: " + status);
          catch (Exception e)
               e.printStackTrace();
          System.exit(0);
the error is:
SendMessage(): sample application.
Using jSMSEngine API 1.2.6 (B1)
org.jsmsengine.CService@addbf1
0
-101
Connection to mobile failed, error: -101
please help me,its very urgent.

come back in about 5 years, we may have time for you by then.
In the meantime, how about contacting the people who wrote that library and asking them nicely for help (rather than trying to order people to drop whatever they're doing and jump through hoops to accommodate your every wish as you're doing here)?

Can an external video camera connect through a Mac to Apple TV?

The business has a conference room that they would like use for video conferencing. They have a flat screen TV and asked if they could mount a video camera above the TV, that is connected to a MacBook Pro or MacMini, and use the external camera for video conferencing. They wouldn't be using it with FaceTime, it's a third party video conferencing program. They just want to know if they could mirror the video conference call through Apple TV when using an external camera?

Hi,
Thanks for your assistance, but I spent quite some time researching this before posting, and the post you link to (which I've already read) doesn't actually answer my question, that person is asking about his wireless speakers receiving individual sound channels through airplay. Other discussions, which I've also looked at, seem inconclusive.
I was really posting in the hopes of finding anyone who had personal experience of trying to play a fullscreen, 5.1 surround video file using airplay mirroring from their mac to their Apple TV, and if they received 5.1 sound.
Thanks again for your help though.

My video is streaming through every program as being very dark?

Similar Messages

Maybe you are looking for