My video-record freezes up when I try to record?

my video-record freezes up when I try to record?

Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as NEW.
If the basic troubleshooting steps don't work, then you'll need to bring your phone into Apple for evaluation and probable replacement.

Similar Messages

I have a new unlocked iphone3gs. I cannot get the video to work. When I try to record video I am not offered any options. It films until I tap the red button, but then everything just freezes. I

I have a new (from Apple) unlocked iPhone3gs. I cannot get the video recorder to work. When I take video I am not offered any options at the start or the end of filming. The screen freezes when I hit the red stop button. But that's it. I have to hit the home button to get out of that. And none of the v-recordings can be found on my phone anywhere.
Also I'm having trouble with Bluetooth. My Mac says it's paired with the phone, but the phone says not; even though It accepts the pairing code from the Mac. I'm getting very frustrated with these problems. I came on here to find the user manuel, but can only find the fingertip manuel and the product license manuel. Both of which I have in hard copy.
And the most annoying thing is the sound on the calls. I can hardly hear the caller.
Anyone got any helpful advice?
Thanks, Elizabeth

Robert or Elizabeth...
Sync media using iTunes, not Bluetooth.
When the screen freezes on the iPhone, try "resetting".
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
And this link is for the iPhone 3GS user guide > http://manuals.info.apple.com/en_US/iPhone_iOS3.1_User_Guide.pdf
Main iPhone Support > Apple - Support - iPhone
Serously doubt this is a "new" iPhone 3GS. More likely refurbished.

When I try to record videos, the camera doesn't pick up my voice. Is it because I have over 1000 pics/vids?? Because Siri can hear me when I talk to her.... It only doesn't work on videos

When I try to record videos, the camera doesn't pick up my voice. Is it because I have over 1000 pics/vids?? Because Siri can hear me when I talk to her.... It only doesn't work on videos

Hi colin3!
It sounds like you could be having an issue with one of the microphones on your iPhone 5. Your iPhone 5 has three microphones that function together and separately, depending on what is using them.
Apple - iPhone 5 - It’s so much more. And so much less, too.
http://www.apple.com/iphone/features/
Enhanced audio on iPhone 5.
Apple EarPods are just the beginning of the improved audio experience on iPhone 5. It’s designed with three microphones: one on the front, one on the back, and one on the bottom. The front and back mics work together to achieve beamforming — a technique that helps iPhone focus on sound from the desired location for clearer audio. New noise-canceling technology reduces background noise. So when you hold iPhone up to your ear in a loud room, you hear what matters most: the voice on the other end.
There is an article available that can help you troubleshoot the issue a little further and can guide you to some next steps. That article can be found here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Captivate 5 Freezes when I try to Record Audio To Slide

Hello,
I'm having difficulties with recording audio to slide in Captivate 5. Recording to slides, background, and object work, but when I try to record to slide, the computer appears to freeze (until I press escape and then I can select buttons again).
I have Windows XP on my computer. I have deleted the preferences C:\Documents and Settings\name\Application Data\Adobe\Captivate, following advice on other threads, but this does not help.
This issue just started yesterday. I was able to record to slide before.
Any help would be appreciated!
Thanks,
Debbie

Hi DebsterV,
Did you try upgrading the system audio drivers as RodWard suggested?
If even that does not resolve your issue, let me know so that we can have a connect session.
Thanks,
Vikranth.

Application freezes when I try to record

I'm trying to make a training tutorial with Captivate 3 for a
new version of our software. The program was done in Power Builder
10.5, and it freezes every time I try to record. Any ideas?
BTW, I'm a dietitian, not a developer. I convinced our IS
dept to purchase an upgrade to v3 so I could make these tutorials.
The powers that be chose not to buy any service plans since I'm the
only one using this and I had no problems with earlier versions of
Captivate and RoboDemo, and our software. Please advise if I need
to request more help. I suppose I can convince our unit to spring
for some help.....
Thanks for any info.

Hi Judy,
Sorry no one has replied before now. I know nothing about
Power Builder, other than it is a RAD (Rapid Application
Development) tool now owned by Sybase - and that's it. Let's see
... looking ...
Just did a search for PowerBuilder and it seems this problem
is not a new one, but not widespread, either. One solution that has
been said to have worked was to open the PowerBuilder application
on a different workstation, and access it with Captivate through a
desktop screen-sharing program. Mark Fletcher (Community Expert)
suggested "Real VNC" in one thread, and it was said to work a
treat. But the idea is to use any desktop-sharing application so
that the PowerBuilder software and Captivate are separated from the
same OS.
This might not make sense to you, Judy, but if you take it to
your IT guru, it should make sense to him or her. Let us know how
it works out for you ... and best of luck.
Larry

My nokia 5800 keeps freezing/crashing when i try t...

my nokia 5800 keeps freezing/crashing when i try to view my pictures and videos? what do i do

Try clearing privacy data in browser to get a bit of ram back. if no good , do hard reset, you'll need to re-set up phone so back up first. Then type *#7370# and use passkey 12345 and phone will re-start and be like'out of the box' your memory card will not be affected.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

I have adobe acrobat pro for windows and it is freezing up when I try to convert a word file to pdf... I have tried to get this done six ways from Sunday but it is just not working... help! Chris.

I have adobe acrobat pro for windows and it is freezing up when I try to convert a word file to pdf... I have tried to get this done six ways from Sunday but it is just not working... help! Chris.

It would be helpful to know what version of Acrobat, WORD, and operating system.
Without that info, I would suggest at this point to open your WORD file and then go to the print menu and print to file using the Adobe PDF printer. Open the created file in Distiller and see if you get a PDF. If so, check to see if AcroTray is running in the background.
You say you tried many ways. It would help to know what you tried and what worked or did not work, and at what point the failure occurs.

TS1630 No sound is working on my music or videos. Nothing works when i try and turn it up. But it works when selecting ringer

No sound is working on my music or videos. Nothing works when i try and turn it up. But it works when selecting ringer tone

Have you checked the volume button? It might be physically stuck. To determine whether a hardware repair is needed, you need to follow these steps:
1. Try doing a hard reset:
Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
After that: test the device to see whether the issue is solved.
2. If the issue is not solved, you should backup the device and restore it as new.
In that case, use: http://support.apple.com/kb/HT4137
NB: set up as a NEW device because a software issue will be in the backup.
If the issue persists after restoring as new, you should offer the device for service.
If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
Good luck
Stijn

HELP!! I am trying to record a presentation on Adobe Presenter 10, I have had no problems in the past, I added motion to some of the boxes in my presentation, now when I try to record I get this error message!!! Adobe Presenter

HELP!! I am trying to record a presentation on Adobe Presenter 10, I have had no problems in the past, I added motion to some of the boxes in my presentation, now when I try to record I get this error message!!!
Adobe Presenter
Adobe Presenter has encountered an unexpected problem while
working with this presentation. Try saving your work to a new file and
restarting PowerPoint. If the problem persists, consult the Help menu
item, or contact support at http://www.adobe.com/support/presenter.

Please provide your system specification. Also is it happening on a specific presentation or every presentation.
Regards,
Rajeev.

Adobe Flash is disabled when I try to record a message on my voice mail.

I have the current versions of Flash and Firefox, but when I try to record my outgoing voicemail message, I can't enable Flash.

If changing your password does not solve then contact itunes support

Why does my ipod keep freezing up when i try to turn it back on?

every time my ipod dies and i try to turn it back on it freezes up.. why? also every time i try to use an app it goes in and in like 5 seconds the app closes.. i've restored it but that only helps for a few days and then goes back to doing the same.. what can i do to make that stop or should i get a new itouch? it also freezed up when i try to reset it..

If it is still acting up after a restore, you more than likely nave a hardware issue.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Why does the letter P show up when i try to record audio into Logic Pro and no audio is audible ?!

Can anyone pleaes help as I have occured this problem today and sent hours trying to fix it and not had any luck !?!?
I always record in audio by press "R" on the channel strip but today for some odd reason the letter "P" shows up and no audio is audiable ?
Can anyone tell me what's going on ............!?!?
"When I try to record in some audio and press "R" it chnages to the letter "P" and no audio is coming through ?!?"

This is because you have Punch on the fly enabled under Options (top menu)>Audio>Punch on the Fly.... signified by the letter P instead of the letter R

Soundbooth error when I try to record - WinFile.cpp-705

We are using Soundbooth on a high school classroom computer. When we try to record from a microphone we get the following error message: ..\..\Src\Win\WinFile.ccp-705
Does anyone know what is causing this error?
The permission rights on school computers are fairly restricted. Our school's Tech Department blames the problem on Quicktime. I think this is a permissions issue.
I would appreciate help solving this problem.
Thanks!

Hi Mahesh --
I have Adobe Captivate 6 and use Windows 7 Enterprise. Below is a screen shot of the error. Unfortunatley, it is in German, but it says : Adobe Captivate can't be started. Check to see if Adobe Captivate is configured to be run in adminstrator mode. If so, configure Microsoft Powerpoint to be run in administrator mode and restart Adobe Captivate.
Thanks again.

I connect my mic with an M-audio mobile pre usb device. When I try to record, I can see that my voice is recording but can't hear it during playback.

I connect my mic with an M-audio mobile pre usb device. When I try to record, I can see that my voice is recording but can't hear it during playback. I tried different input and output settings but it didn't help. Any help will be appreciated.

Hear your microphone or instrument as you play and record (monitoring)
You can hear, or monitor, input from an instrument or microphone in GarageBand while you play and record. When you turn on monitoring for a track, you hear the musical instrument or microphone connected to the track’s input. Monitoring lets you hear yourself play so that you can hear the part you want to record as well as the rest of the project.
You can turn on monitoring for a Real Instrument track or Electric Guitartrack from the track’s header, or in the Track Info pane. Electric Guitar tracks always show their monitoring buttons, and you can show monitoring buttons for Real Instrument tracks using a menu command. You can use monitoring with feedback protection to avoid feedback while you play.
Hide
To turn on monitoring in the track header:
Choose Track > “Show Monitoring for Real Instrument Tracks.”Monitor buttons appear in the headers of Real Instrument tracks. On tracks with monitoring turned on, the button lights yellow.
Click the Monitor button in the header of the track you want to use.
HideTo turn on monitoring in the Track Info pane:
Double-click the header of the Real Instrument or Electric Guitar track you want to turn on monitoring for.The Track Info pane opens.
From the Monitor pop-up menu, choose one of the following:
Choose Off to turn off monitoring. You can hear your instrument only while you record.
Choose On to turn on monitoring and protect against feedback.
Choose On (no feedback protection) to turn on monitoring without feedback protection. If the input level is too high, it may cause feedback (especially if you are using a microphone and listening to your project through your computer speakers).
For an Electric Guitar track, you can view the Monitor pop-up menu by clicking Edit, and then clicking the back side of the amp. The Monitor pop-up menu appears with the input controls below the stage.
You should usually turn off monitoring when you are not playing or singing. When monitoring is turned on, your computer can pick up output from your speakers or monitors, causing unwanted feedback. Using headphones rather than speakers to listen to your projects can help eliminate feedback.
If you select your computer’s built-in microphone as the audio input, in the Audio/MIDI pane of GarageBand preferences, monitoring is turned off for all Electric Guitar tracks to avoid unwanted noise.
SEE ALSO
If you don’t hear sound from a Real Instrument
Was this page helpful?Send feedback.
© 2010 Apple Inc. All rights reserved.

I have an error -5000 when I try to record in GarageBand..I urgen need help, I have an error -5000 when I try to record in GarageBand..I urgen need help

I have an error -5000 when I try to record in GarageBand V10,02..I urgen need help, I have an error -5000 when I try to record in GarageBand..
I just reinstal OSX 10,9,2 marveiks and downdload the GB.. but when I try to record, the error ocurr
I urgen need help
thanks

This is probably one of the files that is required by the template you are using.
These files are inside the iWeb app. Control click the iWeb app icon and select "Show package contents".
You need to dig down through the folders and files to find what you want...
Contents/Resources/da.lproj/Templates/
If the file is missing you would need to re install the iWeb app...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

My video-record freezes up when I try to record?

Similar Messages

Maybe you are looking for