My video recorder isn't working on my iphone5, any clue?

I switch from the camera to the video recorder and the button doesn't turn red so I can turn on the recorder. nothing happens. Just started happening after I upgraded to 6.0.2 this morning...

This is getting rediculous. Im now going on 24 hours without emial and all Apple suport keeps doing is changing the time for the next update. first it was noon yesterday then 5:00 pm now its 8:00 am today but they dont say anyithg. Where is the assistance.
http://www.apple.com/support/icloud/systemstatus/

Similar Messages

Stereo video recording is not working after updating to ICS

hii am Dilu from India. I updated my xperia mini (ST15i) to ICS. After that stereo video recording is not working. Last week i found a new ICS update and i upadated to build .587 , now also the same problem exsists. Somebody please help
Solved!
Go to Solution.

As I understand the the audio during video recording will be recorded in mono running on ICS.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

My video recording sounds not working but other sounds are working fine, I've tried clearing the little mic thing near my earphone hole and had no success can someone please help me out?

hhi guys
my video recording sounds not working at all but it's working for other things such as music. I've tried to clear my sound thing near the earphone hole but had no success can someone please help me out?

Had an Iphone 4 for about 3 months now. This happened to the first one I had and they ended up having to replace it at the apple store just a couple weeks ago 6/2. It happened again last night to my new one. This time i was able to correct it by going to itunes, backing up the phone to icloud, and then restoring the software. Mine did not work with voice memo, but did work with headphones plugged in, and would also work on speaker. I could hear callers but they couldn't hear me. I had purchased a new case (lifeproof case at $79.99) because it comes with plugs that cover the headphone jack, and the charging port, and is also waterproof. I heard that the root cause is due to lint, dirt, etc getting inside the headphone jack. Well, must be something else. It's a 10 days old phone, and has been in this overpriced case the whole time, and I have not used the headphones. I hope this doesn't keep happening.

Facebook app isn't work on my Iphone5

Facebook app isn't work on my Iphone5. It won't no longer load. Any suggestion? I've deleted the app and reloaded but no luck!

Was just trying to see if it was a problem with your account.
Reset your iPhone: hold down the home and sleep buttons, wait for the Apple logo, let go of the buttons.

M-Audio FastTrack USB recording isn't working?

M-Audio FastTrack USB recording- I installed it, and am trying to record sound through my keyboard. I can hear the sound through my headphones, and Audition recognizes the device, ( I have the input set to Mono > Line In 1 FastTrack) but not the sound. The level bar won't move or anything. I have no clue why this isn't working and I've been messing with it for hours so I'd really appriciate some help!

Since this behavior usually indicates an interruption in the communication between Audition and the audio driver, I wonder if a "force driver reload" button would help. I'm not sure if the application can automatically sense this state since there appears to be enough of a data stream to make it appear as if things are ok.
Either way, it's something that needs investigation.

Our EFFECT COLOUR CORRECTION COLOUR BALANCE feature doesn't work on solids. Any clues?

Hi, I'm trying to help a friend troubleshoot a light sabre effect. He has followed a series of instructions from the net, but no matter what we try the solid will not change colour using the EFFECT > COLOUR CORRECTION > COLOUR BALANCE feature on the layer.
On the linked page is the file + full instructions:
http://beyondthewallmedia.com/?q=aftereffectsproblem
Could someone more experienced with After Effects please help us out and tell us why this feature isn't working in this project?
"Using your mouse to slide the numbers, drag the 3 “Blue Balance” labels to the right, up to 100 is you wish. This should start to change your glowing white lightsabre into a blue one. Play around with it, till you have the colour you want. You can slide the “Red” and “Green” Balance labels to the left to lessen their effect too."
Would really value someone taking a look at this for us. Thanks.

I agree with Mylenium. There are some serious flaws in the instructions. With no colour in the solid, Color Balance will have no effect.
But your project is also incorrectly built, according to the instructions: you've duplicated the mask 5 times, rather than the layer.
In the precomp, make your solid blue, with just one feathered mask, duplicate the layer 3-5 times, switch all to Add transfer mode.

"Reply to all" is not working as hoped. Any clues why?

When I hit reply to all either using the shortcut or the toolbar button, the Cc address is not copied on the outgoing message. Any clues how I can address this behavior? thanks!
I am using Leopard and the latest Mail.app.

Scott,
Thank you for your reply. I am unable to "Save and then upload". How do you do this?
Make sure to set images on a per podcast basis as
well (tunes -. Get Info - Artwork and fill in other
areas) Save file and the nupload.
iTunes search and update is affected by the phase of
the moon so no one really knows. Key words need to
have commas but even then it doesn't seem to work
most of the time.
I still need to know why certain columns are not being populated correctly, for example the Artist appears as unknown even though I have supplied a value in <itunes:author> tag. And there are many other issues.

Flash video recording won't work

I'm having a a 2013 model 27" Mac, OSX 10.8.4, with Flash Player version 11.8.800.94. It won't let me record, and sometimes not play either, video and audio through an integrated Flash Player in a certain website. I've tried both Safari and Firefox, no joy. Safari version is 6.0.5. When I get to the page where the recorder is implemented, it is displayed as normal, but only says "loading". The Flash player plugin works perfectly in any other web page I have tried, including the test pages on Adobes pages. If I try the same webpage with the Windows laptop I've got (yuck...) it works without any issues.
Now, to make this even more complicated, the issue is valid only for two out of the five accounts we have. Both these accounts use the Parental Control feature in OSX, but I have made it as liberal as possible, and specifically allowed everything for the webpage in question. However, I have a third account with parental control where this is not an issue... I have also tried to remove the parental control with no luck. I have checked all the settings and Global Settings for Flash Player, and made sure everything is allowed.
I guess making a new account could maybe solve the problem, but there's got to be another way?

Bolla Brutus wrote:
I'm having a a 2013 model 27" Mac, OSX 10.8.4, with Flash Player version 11.8.800.94. It won't let me record, and sometimes not play either, video and audio through an integrated Flash Player in a certain website. I've tried both Safari and Firefox, no joy. Safari version is 6.0.5. When I get to the page where the recorder is implemented, it is displayed as normal, but only says "loading". The Flash player plugin works perfectly in any other web page I have tried, including the test pages on Adobes pages. If I try the same webpage with the Windows laptop I've got (yuck...) it works without any issues.
Now, to make this even more complicated, the issue is valid only for two out of the five accounts we have. Both these accounts use the Parental Control feature in OSX, but I have made it as liberal as possible, and specifically allowed everything for the webpage in question. However, I have a third account with parental control where this is not an issue... I have also tried to remove the parental control with no luck. I have checked all the settings and Global Settings for Flash Player, and made sure everything is allowed.
I guess making a new account could maybe solve the problem, but there's got to be another way?
That says it's an account specific issue and has nothing to do with Flash Player. If it was solely the plugin it would happen on ALL ACCOUNTS, regardless of type.
What software are you using to record?

Photo Booth playback of video recording doesn't works

Hello !
I have a problem with the playback function of recorded videos in Photo Booth.
My machine is an iMac late 2007 with Mountain Lion on it.
Well ! It's possible to create a video with Photo Booth. But if I like to playback the record in Photo Booth, I only see a black screen inn the Photo Booth window.
Any solutions for me?

Hello namzo !
May be it will be solved in the next Mountain Lion update.

My iPads video gallery isn't working now

I downloaded a t.v. show a couple of days ago and the downloading was apparently interrupted somehow. So I tried to redownload it again since it wasn't successful and iTunes won't let me because it says I already downloaded it. I try to watch it in my video gallery and it acts as though it is trying to load my videos but It never does. It's just a black screen with the little loading symbol in the middle. Restarting it didn't make a difference. I don't know how to fix the issue. Help!

'Fixes' that quite often work for the Videso app are :
Try searching for the name of one of your videos on the iPad's spotlight search screen - swipe your first homescreen to the right, type in it's name, and if it finds it tap on it to see if it plays.
If that doesn't work then try closing the Videos app completely : from the home screen (i.e. not with the Videos app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Videos app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option if the two above don't work is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Presenter 8 video record fails to work with firewire camcorder

Tried to record with camcorder connected via firewire. Presenter video creator crashed. Poor results for a highly anticipated "upgrade". Problem with installed "Adobe-Pr-VC.exe" app. Wish that Adobe would test their products instead of having us doing their Quality Control. But, I guess this is what they would describe as being a "feature". Glad I'm finding all these problems during the "trial" period.

Hello Bill,
I reported a similar issue on August, 9 : "Presenter 8 crashes after connecting external Firewire cam"
("http://forums.adobe.com/message/4609394#4609394")
The lack of support for FireWire connections is making the product less usefull than I tought it would. We also record conferences and corporate training presentations, and recording the speaker with just a low quality webcam is not always the best option (limited options of framing, zooming, panning, tilting, following the speaker ... they are not always standing on the same spot ).
Being in the "trial" period still, I digitized and copied a pre-recorded videofile of a recent presentation on my PC and tried to synchronize it with the PowerPoint presentation, but then I found out that I need to split up my complete recording in as many individual pieces of video as the amount of slides the speaker presents. Presenter only allows to import and synchronize one videofile with one particular slide. This type of post-processing is time-consuming and inefficient.
I also can't ask the trainer to do his/her presentation in a classroom first before an audience, and then repeat the whole presentation again afterwards in front of his/her webcam to record it to make it available for people who couldn't attend the session.
That is why the connection of an external camera or recorder is a necessity. There is nothing as easy and efficient as having a camera at the back of the class or conference room, and synchronize the camera image with the PowerPoint slides in real-time, while the speaker is presenting the slides before an audience. We simply don't have the time to go through a time consuming post-processing cycle by cutting the recorded presentation into several individual videofiles and importing them into the individual slides, or asking the speaker to repeat the presentation for the 2nd time in front of a webcam. Time is Money.
I also found out that only presentations recorded in real-time with a webcam (via the RECORD button on the toolbar) gives me the possibility to upload the presentation to YouTube. When using the possibility to import a videofile to a slide via the Presenter toolbar (Video --> import), it only gives me the possibility to publish to My Computer (or network), to Adobe Connect or to a PDF-file. No YouTube publishing possibility here anymore.
Why not, Adobe ?
Company policy to only connect to the proprietary Adobe Connect platform?
That is a real pitty.
I really don't understand Adobe's policy to not support FireWire appliances in Presenter 8. This would open so many possibilities for the product.
FireWire support is nothing new for Adobe. I'm an Adobe Premiere user for more than a decade, I use Adobe Flash Media Live Encoder to stream training sessions, conferences, etc ... and all these products support FireWire without any problem.
Don't tell me that the Adobe team needs to start studying for months how to connect a FireWire camera or recorder to its Presenter 8 software.
I hope they will investigate how they can solve this flaw as quickly as possible.
In the meanwhile, I guess, I will let the trial period pass and might consider purchasing the product once this issue has been solved.
Regards,
Patrick ROTEN
CIPAL
Governmental ICT Agency
Dept Marketing & Strategy
(Belgium)

After upgrading audio on video files isn't working

After "Upgrading" to 6.0.2.23 the audio on video files is screwed up. The video image is fine but it sounds like a CD player that's stuck. Audio only files and streaming audio files play fine. Any ideas?
Dell Workstation Windows 2000

Solved!
codecs were missing...should have thought about it!
Jsut install the perian app for quicktime....fixed.

I just upgraded to OS X Mountain Lion......now my e mail isn't working....any suggestions?

I downloaded/upgraded to OS X Mountain Lion, version 10.8.2, and now I can view any of my emails. Does anyone have any suggestions for how to fix this problem? If so, it will be greatly appreciated!

Quit Mail.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click the text on the line below to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy (command-C) the selected text to the Clipboard. In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste (command-V) into the box that opens, then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. If you get a warning that the file is in use when you try to empty the Trash, log out and log back in.

Hi, Flash player has gone grayed out, it used to work fine before. Any clue?

Flash player is showing gray box. It is working fine in "Next Browser" and "Dolphine Browser".

''jayelbe [[#answer-665432|said]]''
<blockquote>
Hi Zaffar,
It sounds like you might not have the newest version of Flash installed. Firefox will stop some older versions of Flash from running in order to protect your security.
To install the latest version of flash:
# Go to this page on the Adobe website: http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
# About three quarters on the way down the page is a section titled ''Flash Player for Android 4.0 archives''
# Tap the first link in that list to download Flash 11.1.115.81
# Once the download is completed, install Flash by swiping down from the top of your screen to show your notifications. Tap the ''Download Complete'' notification to start the installation.
# When the installation is finished, quit Firefox and then relaunch it.
# Enjoy your newly-working Flash! :D
I hope this helps. Reply to let us know if the problem is fixed!
Jayelbe
</blockquote>
Thanks for your valuable time, I already have the latest Flash player installed :(
And the videos are showing properly in "Next Browser" as well as in "Dolphin Browser" it just recently stopped in Firefox that is also latest and updated.....

My itunes on windows 8 quits "itunes has stopped working" every time. any clues?

Can you help with an answer to itunes quitting each time I launch it? I've tried uninstalling and re-installing several times.

I have the same problem in windows8, I've reinstalled old versions and new versions but is happening the same error "iTunes has stopped working", Windows closes iTunes and start searching for solutions...
Pleas Apple Support We need answers!!

My video recorder isn't working on my iphone5, any clue?

Similar Messages

Maybe you are looking for