My Video shakes from side to side in Windows Media Player is this caused by the stabilization effect

I have recently saved some of my video's in the format "MPEG HD 720P 30" and when I play them with windows media player is does not go full screen it has the two black bars on the sides and at certain points in the video the sides will shake right to left. I did some reading and it seems to be the video stabilizer going to effect however on the yellow line drop down menu on each clip in my timeline the setting is on Opacity and not stabilization. Is there any reason it would still be doing this?

I am using PE 10 and the Camcorder is a Sony handycam dv, model dcr-hc36. I did use PE to import the video.
the project settings:
General-
Editing mode: DV NTSC
time base: 29.97 Frames/second
Video settings-
frame size: 720x480
pixel aspect ratio: d1/dv ntsc (0.9091)
fields: lower field first
display format: 30fps drop-frame timecode
title safe area: 20/20
action safe area: 10/10
video rendering-
file format: microsoft avi dv/ntsc
compressor: dv ntsc
optimize stills: active
output settings:
-MPEG 2
-HD 720p 30
output Summary:
ntsc, 1280x720, 29.97 fps, quality 4.0, de-interlaced mpeg, 384 kbps, 48khz, 16 bit, stereo, VBR,
1 pass, min 4.00, target 15.00, max 18.50 mbps
Source: clip, sequence 01:
720x480 (0.9091), 29.97 fps, lower, 01;08;15;17

Similar Messages

Using a video purchased from itunes for use in windows media player

I purchased a tv show on itunes and I was wondering if there was any possible way to view the video using windows media player,
thanks

Sorry but no. The copy protection will only allow play in iTunes or on a video-capable iPod.

Videos emailed from my iPhone4 won't open or play on the recipients' computer. Is this a quicktime/windows media player issue? What is the best way to solve this ? THANKS!

Videos emailed from my iPhone4 won't open or play on the recipients' computer. Is this a quicktime/windows media player issue? What is the best way to solve this ? THANKS!

Is the recipient using QuickTime on their PC to view the video?
What is the error message provided when trying to open/view the video?

I can sync media files from Windows Media Player to my ipod, but the information will not show up on my ipod. Why?

I HATE using iTunes (it's a pain in the bleeping arse) so, despite what someone from Apple told me, I tried to sync a song from Windows Media Player onto my ipod. The sync appears to be successful, and yet when I ejected my ipod to check to see if the song was on there, it was not. Why? And how do I get it on there? I want to avoid using iTunes at all costs.

Try MediaMonkey or Winamp. Unlike Windows Media Player which will just blindly throw the files onto the iPod's hard drive these two at least (there may be others) know that they have to update the device's database if you are going to be able to access the content that has been added.
tt2

I use to be able to click on a link in a website to watch a video and it would launch windows media player. I have installed the plugin but it still will not launch

Windows Media player will not launch from a video link within a website. it worked until I installed FF4. I did install the plug in but still nothing it just goes to a black then blank page when you try to launch the video.
Ideas?

At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
Then... Try putting these numbers in Network>TCP/IP>DNS Servers, for the Interface you connect with...
208.67.222.222
208.67.220.220
Then Apply. For 10.5/10.6 Network, highlight Interface>Advanced button>DNS tab>little + icon.
DNS Servers are a bit like Phone books where you look up a name and it gives you the phone number, in our case, you put in apple.com and it comes back with 17.149.160.49 behind the scenes.
These Servers have been patched to guard against DNS poisoning, and are faster/more reliable than most ISP's DNS Servers.
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
10.5.x/10.6.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.

Recording audio in Adobe Audition from a DVD played on Windows Media Player

I use Adobe Audition for audio production. I should be able to play a DVD via Windows Media Player and record the audio from it using Adobe Audition.
It isn't working.
I get a pop-up message indicating: INVALID ASIO INPUT (it continues to read) ! The selected input port or ASIO driver is invalid. Please change your settings in the audio hardware setup dialogue.
I tried that approach, and was not offered the ability to make that change.
Anyone have any ideas? My much older VAIO Sony computer handled this perfectly.
Thanks!

Hey Terry
in the corporate world wee have to contend with clients who are all windows based and prevented from installing anything on their systems.
I use Flip4Mac, Studio Pro HD, with the following mix of settings;
Open clip in QT, I do also use compressor but for some reason I like using QT for exporting to WMV.
File/Export
Export:movie to windows media
Use: One pass VBR, Presentation (high), 16:9
Options>
Advanced... input type: interlace Lower field first(DV), output type: progressive
Coding method: Two pass VBR
Give this a shot and then tweak to suit your needs, oh and you can save your settings as a preset for QuickTime.
Within Compressor there is no export to WMV, so you have to start with another setting and create your own saving it for future use.
Tony

Windows Media Player has somehow made itself the dealt video player for certain file types?

Title should say default
I have Windows 7 installed in a virtual machine but I didn't think Windows Media Player would barge it's way onto my Mac and start making itself the default player for files here too -.- I even right clicked on the file, click open with.. chose vlc and checked the change all box. This worked and now when I double click the file it will open with vlc, but when I right click it, it still says that Windows Media Player is still the default player for this file type.

alexis
Don't know much about WMPlayer, but if FCE has multiple audio tracks a "MIX Down Audio" should be done just prior to the export.
Al

.avi video clip audio not working in premiere pro but play is windows media player

Hi all,
Using .avi video files. They play fine in windows media player. In premiere pro, the video plays fine, but there is no audio. When moved to a sequence, it builds an audio track, but it is silent. Any help is appreciated.

AVI is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Can't play videos on Windows Media Player from Xperia z3

I have recorded som videos and while trying to load them onto my computer via USB some show up and others just play the sound without the video?
Can anyone help with this problem?

Hi Gearld, welcome to the community!
I would advise transferring the files through PC Companion using the Media Go app like Phy has suggested & also playing the videos through VLC player rather than Windows Media Player as this VLC player can read a large number of formats and is most likely to play your videos smoothly.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Make Firefox Open Windows Media Player for Video Files

I need to make Firefox open the actual Windows Media Player application (not a plugin, the actual app window) when clicking on video links, e.g., WMV. These file types are already associated in Windows Explorer with WMPlayer, but this has no effect on Firefox.
What happens right now is that after clicking a video, I get a black screen with the yellow VLC Player icon (VideoLAN VLC is installed on my PC) in the center and no video. I do NOT want to launch VLC or any internal plugins.

You can change what type of application opens for each kind of type in Firefox's options.
*[[Image: new-fx-menu-button]] > Options > Applications > (example) SWF File > Select whatever is on the right side (e.g. Use ShockWave Flash for Firefox > Set <i>Use other</i>, find Windows Media Player

Windows Media Player cannot play the file because the required video codec is not installed on your computer

I can not find solution to the issue "Windows Media Player cannot play the file because the required video codec is not installed on your computer" while attempting to play the file with *.wmv extension. Some computer fail in spite of said missing codec
being present according the windrows media player in Windows 7 box

If Rashid's link does not resolve it... consider the below:
A) As of this writing, the codec for GoToMeeting webinar recordings ("G2M4" codec) was only mentioned in *one* web page, of about 10 Microsoft web pages I read, to resolve this problem (and that codec is not included, yet, in their diagnostic tool),
so if you're trying to play a GoToMeeting webinar, simply get the codec for it from their site: http://www.GoToMeeting.com/codec
B) If Windows Media Player (WMP) will not even open the file, you won't be able to get the 4-character codec's name (like "G2M4") from WMP. But VLC's media player will tell you that code, even when it fails to run the video.... and then you can
search the internet for it.
C) The problem sometimes is not actually a missing codec. Other things that have helped others, some from:
http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/the-windows-media-player-12-could-not-play-the-wma/bb823460-44df-4e8d-ba2c-42ec0e111e5a?page=3
(1) running the System File Checker (SFC.exe),
(2) opening WMP first (running both the 32-bit and 64-bit versions) then opening the file from inside them,
(3) confirming that WMP was the file association for WMV files,
(4) Control Panel -> Hardware and Sound -> Sound, selecting my audio device, and looking for a "5.1" setting (I didn't have one), to change to "stereo",
(5) checking Tools\Options\Devices\Speakers\Properties\Speaker Properties\AdvancedPlayback\ Speakers /HP\Properties\Advanced\Default Format, to select "CD or DVD Quality" (if that setting appears for your device),
Good luck,
-- Doug
Doug Ivison

How can i take the music or music video iTunes to my windows media player

i would like to know how import music and music videos from my iTunes to my windows media player . so i can put it on a usb flash drive or a DVD or music CD . so i can have for my cleints . i am a limo driver . and like having new music for them .

if the music and music videos are purchased through iTunes then you won't be able to as they are protected (DRM). Basically, you can't.

Opening a video in Windows Media Player

How do you open a video in Windows Media Player?
The video I'm trying to open in Windows Media Player is an
avi file.
I noticed that in the Authorware 7 book, it says to simply
add a
wmp after "avi". For ex: myvideo.avi.wmp
It then says to place or import that file onto Authorware
(the flowline).
However when I play it to view, it does not open in Windows
Media
Player. Can someone help me with this problem?
Thank you.

Yes it did. Thanx Erik. Appreciate it.
quote:
Originally posted by:
Newsgroup User
No.
Do NOT use the video icon. As has been stated here a few
times, that is
ONLY for playing the movie INside Authorware.
If you want to play a movie OUTside Authorware, you use the
JumpOUTReturn function, NOT the JumpFILEReturn function.
Your folder setup is good.
So with that folder setup, assuming 'myvideo.avi' is in the
same folder
as your Authorware file, just do:
JumpOutReturn("", FileLocation^"myvideo.avi")
That work for you?
Erik
V1ck1_D wrote:
> I redid this task, I did everything the same as I did
before (posted above)
> accept I changed the file path so it would be shorter
and to avoid the
> mistakes in the path.
>
>
> I created a folder called "Testing".
>
> Created a file in Authorware called "Testing" (a7p) and
inserted that into the
> "Testing" folder.
>
> Inserted an avi video in the "Testing" folder
>
> So with that done I redid the coding in the calc. icon
as:
> JumpFileReturn("", FileLocation^"myvideo.avi")
>
> Placed my "myvideo.avi" icon below the calc icon.
>
>
> Is the coding correct.
> If someone would help me with this, I would really
appreciate it.
> Thank you.
>
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware

How do I import music from itunes, windows media player or my music onto a ipod?

I have just got Now 83 on cd and want to download it onto my iPod touch (4th gen ios 6.1), I have iTunes and have made a playlist with the songs on, I have ripped the files onto windows media player and i've got the songs in my music folder. What do I do now? I've tried copying the playlist and file but it doesn't work so... (10 points if good answer)

Noroc Blame wrote:
So literally all I need to do is sync my current iTunes library on my iPod to the computer I'm using now as I have synced my other songs onto another computer?
If this is yes, you will get 10 points.
Don't lie.
No - exactly the opposite.
You cannot sync the music on the iPod, from the iPod to iTunes.
You have a choice:
Follow lllaass's tip, mentioned in his post of 22:35 this evening. Not my preferred method, because I believe it becomes difficult to manage with a large complicated Library and an absolute nightmare if you ever need to Restore your iPod. Not to mention moving everything to a new iPod, eventually. But don't let me stop you.
Take my advice. Put all your music etc. into one Library, using an external drive to move songs from other computers to the one computer and iTunes Library you intend to use. That way, you have one Library to work with (which you should then regularly back up onto the external drive, so that if your computer's drive fails, you can restore your Library from the most recent back up). Play counts, Playlists etc. etc. are all there, in one place. Less likely to lose some content, compared to having stuff all over the place.
Assume that I am lying...
Huh? What's that all about? I'm trying to help you. I have quite a few points to my name, you can see for yourself. Those points are awarded by people who feel that I've helped them, I don't put them there. You will find that I can be very caustic in some of my posts, but that's with people who deliberately come here to cause trouble. Unfortunately, there are many of them. Their posts usually start with;
I hate Apple
I don't like iTunes
I bought an iPod
they have a user name such as "Fred Linux 985"
...and they have no points
(I have nothing against Linux).
Noroc Blame wrote:
Don't lie.
Don't ever say that to me again.

Open video in Windows media player

The county offers streaming video of meeting of the Board of Supervisors.
The video requires that it be playing in Windows media player for the Mac.
When I click on the video link on the County's web site the video opens in what I presume is a dedicated Safari player but the video does not run properly in that player. (The name of the Safari player isn't identified.)
Is there a way to get Safari to open video files in the Windows media player?
Thanks,
Jim

Hi iBob,
Yes, I do have Flip4Mac installed. I don't know that Safari (3.2.3) recognizes it. Safari used to display the plug-ins under the Help menu, but now it doesn't on my new Mac Mini.
Let me issue a challenge--if you are willing.
1) Go to url: (http://new.mynevadacounty.com/streaming/)
2) At the bottom of the page there are 3 video links labeled: "video" Click on any one of the three.
3) Assuming that it will begin to play (on my Mac it opens in an undefined player) you are supposed to be able to jump to any of the agenda items listed in the box in the lower left hand corner of the screen. (Otherwise you have to listen to the entire meeting (lasting over 7 hours) to get to the item.) This option (jumping to the selected agenda item) doesn't work on either of my Macs (Power Book and Mac Mini).
I would appreciate your feedback.
Jim
P.S. According to the County IT department you need:
1) A G3 or newer with Mac OS X installed.
2) You also must use Window Media player version 9 or higher or silverlight player.

My Video shakes from side to side in Windows Media Player is this caused by the stabilization effect

Similar Messages

Maybe you are looking for