My videos on iPhoto no longer play ... the message reads OSStatus error -54. anyone any idea what this might mean?

Hi Terence,
FWIW...
I just restored my entire iPhoto library from Time Machine. I'm running Yosemite. After opening iPhoto for the first time after restoring the DB, it asked me to confirm my library location. Then it proceeded to update all the thumbnails. After this was completed, I observed what the OP reported: all photos work normally, but all videos were a.) missing thumbnails; and b.) yielding this error code when attempting to open.
HOWEVER. Doing a Reveal in Finder showed the videos on disk, and they were playable. After quitting iPhoto and restarting it, it *again* said it was updating thumbnails, and now all the videos both have the thumbnails and play correctly from within iPhoto.

Similar Messages

My iPad and iPod touch won't play the music I choose. Has anyone any idea what the problem could be?

Hi,
Since the IOS 5.0 update my iPad 2 and iPod touch (3e generation) won't play the music I choose. I choose a song from Michael Jackson for example and it's going to play something completely different. The images has changed aswel, so it is a bit strange.
I treind to sincronise them again, but this doesn't change a thing. Has anyone any idea what could be the problem and how to solve it?
Kind Regards,
Ward

So just in case anyone else ever runs into this...
I solved the issue and it was that between the plug of the new earbuds being slightly thicker than the Apple earpods, and the width of the case that I was using for my iPod, there wasn't a connection being made to activate the remote function.
I took off the case and now the earbuds work exactly as they should!

I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

I have a late 2009 macbook with osx 10.9.2 i recently added more memory to stop the colored pinwheel from poping up all the time but it has started again any ideas why this might be ty

my 2009 mac book has the pinwheel popping up alot any ideas?

You'd have to look into Activity Monitor utility, to see if any applications or processes are running or hogging system resources; not just RAM (as it may seem OK even if it isn't; esp in Mavericks) but in the areas of hard drive capacities. Could be you have some other issues not just a too-full hard disk drive, or not enough RAM installed.
Late 2009 MacBook 13-inch:
Introduced
October 2009
Discontinued
May 2010
Model Identifier
MacBook6,1
Model Number
A1342
EMC
2350
Order Number
MC207LL/A
RAM spec:
Maximum Memory
8.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 204-pin PC3-8500 (1066MHz) DDR3 SO-DIMM
•MacBook: How to remove or install memory
http://support.apple.com/kb/ht1651
{specs from http://mactracker.ca for MacBook6.1, Late 2009, 13-inch model}
Another utility that could show you plenty of busywork things going on, is Console. The system logs in there can show a detailed list of tons of activity. Perhaps some of the often-repeated results may be worth considering; and go by the time (day, hour, minute) you notice the spinning wheel; look into the logs from then.
Have you tried starting up in SafeBoot (shift key held on startup, then login screen appears, hold down shift key again when you login) and then run Disk Utility's repair disk permissions? When done, you could try & restart the computer normally.
If you happen to get incorrect specification RAM (close but not correct) that could also play into a spinning wheel deal; however the problem may be something else that RAM did not cure. Yet bad or incorrect RAM only adds to a pre-existing issue, since it could not solve it. Same with a System Upgrade. To upgrade to Mavericks with problems already does not mean they would go away; often that makes the first condition harder to resolve.
Good luck & happy computing!

Any idea what this errorr means? the data type of the reference does not match the data type of the variable

I am using Veristand 2014, Scan Engine and EtherCat Custom Device. I have not had this error before, but I was trying to deploy my System Definition File (run) to the Target (cRio 9024 with 6 modules) and it failed. It wouldn't even try to communicate with the target. I get the 'connection refused' error.
I created a new Veristand project
I added the Scan Engine and EtherCat custom device.
I changed the IP address and auto-detected my modules
i noticed tat Veristand didn't find one of my modules that was there earlier. (this week)
So, i went to NiMax to make sure software was installed and even reinstalled Scan Engine and Veristand just to make sure.
Now, it finds the module, but when i go to deploy it getsto the last step of deploying the code to the target, and then it fails.
Any thoughts?
Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Preparing to synchronize with targets...
• Querying the active System Definition file from the targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.
• Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Preparing to deploy the System Definition to the targets...
• Compiling the System Definition file...
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Sending reset command to all targets...
• Preparing to deploy files to the targets...
• Starting download for target Controller...
• Opening FTP session to IP 10.12.0.48...
• Processing Action on Deploy VIs...
• Setting target scan rate to 10000 (uSec)... Done.
• Gathering target dependency files...
• Downloading testChassis.nivssdf [92 kB] (file 1 of 4)
• Downloading testChassis_Controller.nivsdat [204 kB] (file 2 of 4)
• Downloading CalibrationData.nivscal [0 kB] (file 3 of 4)
• Downloading testChassis_Controller.nivsparam [0 kB] (file 4 of 4)
• Closing FTP session...
• Files successfully deployed to the targets.
• Starting deployment group 1...
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details:
Error -66212 occurred at Project Window.lvlibroject Window.vi >> Project Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
LabVIEW: The data type of the reference does not match the data type of the variable.
=========================
NI VeriStand: NI VeriStand Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
• Sending reset command to all targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.

Can you deploy if you only have the two 9401 modules in the chassis (no other modules) and in the sysdef? I meant to ask if you could attach your system definition file to the forum post so we can see it as well (sorry for the confusion).
Are you using any of the specialty configurations for the 9401 modules? (ex: counter, PWM, quadrature, etc)
You will probably want to post this on the support page for the Scan Engine/EtherCAT Custom Device: https://decibel.ni.com/content/thread/8671
Custom devices aren't officially supported by NI, so technical questions and issues are handled on the above page.
Kevin W.
Applications Engineer
National Instruments

My videos in iPhoto no longer play ... the message reads OSStatus error -54.

I originally shot these videos of my deceased mother when I had a Power Mac Pro G4 with Snow Leopard, so I'm assuming power pc stuff is no longer supported in Mavericks.
How can I restore these archival videos ?

One reason why videos don't play might be a missing cached file.
With MacOSX Mavericks and Mt. Lion it helped to rebuild the cache using a Terminal command:
Try this fix posted by andyBall_UK
Open a Terminal window (the Terminal.app is in Applications > Utilities)
Copy and paste the line below into the Terminal window, hit return and enter your administrator password.
sudo /usr/libexec/xpchelper --rebuild-cache
If you do not want to use a Terminal command you can achieve the same thing by booting into recovery and reinstalling the system on top of your current system - don't wipe the drive again. OS X: About OS X Recovery

Videos on iPhoto no longer play. All was fine as I was organizing photos, but suddenly no more videos would play. What has happened?

Videos on iPhoto no longer play. All was fine as I was organizing photos, but suddenly no more videos would play. What has happened?

Something went wrong. Now for a useful answer...
Before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

I have a Sony Cybershot camera. My problem is that I can't view my panoramic photos properly with iPhoto. Sony says to contact Mac support. Has anyone any info on this prob, please?

Panoramic photos. I have a Sony Cybershot camera. My problem is that I can't view my panoramic photos properly with iPhoto. Sony says to contact Mac support. Has anyone any info on this prob, please?

Not sure what you want - you shoot the photo by doing a sweep and the camera makes a static JPEG that is long (panaromic) and you import it - on the camera and in iPhoto is is a panaromic photo
for example
LN

When synchronizing my iphone4 on the computer it errors out when optimizing the photos and shuts down iTunes. Any idea what to do to get the synch working?

When synchronizing my iphone4 on the computer it errors out when optimizing the photos and shuts down iTunes. Any idea what to do to get the synch working?

OKay, here is the deal. You cannot change the location of encrypted files nor can you share them with other machines. There is no file server for iTunes so even if you export the movie index from iTunes to an external volume, each time you reboot your computer itunes has to reindex the external drive every time you want to access the files. The second you run your mobile computer without the external drive or try to access the HD movies from another device or another user on the same network, the indexing gets out of synch. The entire process is self defeating regardless. The HD movies are encapsulized by apple to stream to your devices via iCloud and NOT via Cloud. Only your TV can play 1080p. That single file you download from iTunes has mutiple versions of the same video in the capsul, one version for each type of apple device. There are no 1080p apple devices except for the Apple TV. When you buy a movie you are buying a license and not the movie. It's going to get worse with all the new copywrite laws. Already you cant share any apple devices with other itunes accounts. Your airport express just stopped streaming music to all users on the local home sharing Cloud. Only the one user for each device and soon only airplay speakers connected directly to the device. No more passthru via your TV and no more file sharing with other accounts on the same wi-fi. All the ISPs are doing the same thing. And soon everybody will be buying their phones and TV's and iPads from the cabble guy.
Apple has done a poor job of educating the consumer as to the difference between the Cloud and iCloud. They are not the same at all.
Message was edited by: ronfromwoodland hills

I can't log in to game centre but I can log into iTunes. I recently changed my password. I checked the troubleshooter and am getting the message regarding server error but how do I fix this? It doesn't specify this in that article. I don't have firewalls

I can't log in to game centre but I can log into iTunes. I recently changed my password. I checked the troubleshooter and am getting the message regarding server error but how do I fix this? It doesn't specify this in that article. I don't have firewalls

Hello sadiepix,
The following article details several things that can be done to quell iTunes' constant need for authorization.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Cheers,
Allen

My safari keeps closing unexpectedly and when it does it tells me that it quite while using the .GameHouseBeachParty.so plugin. I have no idea what this means! Can someone please help me fix this?

My safari keeps closing unexpectedly and when it does it tells me that it quite while using the .GameHouseBeachParty.so plugin. I have no idea what this means! Can someone please help me fix this?

You have the Flashback trojan.
Check out the replies in this thread for what to do;
https://discussions.apple.com/message/18114958#18114958

I have an iphone 3g on the top bar left of the battery symbol i have an icon of a lock with a cirular arrow around the lock any ideas what this is

hi my 3g ipone has problems connecting to a wifi hotspot,on the top next to battery symbol is a LOCK ICON with a circular arrow around lock .anyone have any idea what this signfies and could it be something to do with the wifi problems

It's orientation lock. Double tap the home button, swipe left to right, far left is the orientation lock. Tap on/off. Tap home button when finished.

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't, and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

Try leaving it plugged in and then restart the computer.
If you are on Windows this link may help but it is a bit old.
http://www.technologynext.org/error-usb-device-not-recognized-how-to-fix/

Working in Pages a folder with the Pages icon in a folder appeared on my desktop I cannot move it delete it do anything to it. Any idea what it might be? Thank you.

While working in Pages a folder appeared on my desktop with the Pages icon on it. I don't know how it got there. It will not let me move it on the desktop. I will not let me delete it. It will not let me do anything to it. Any idea what I might have done to create this alien?
Any help greatly appreciated with thanks in advance.

Restart Finder by pressing option + command + Esc. Select Finder int he window that pops up and click on the Start/restart button.
You could also try deleting the com.apple.finder.plist file from Users > your name > Library > Preferences
Restarting the computer in safe mode , press the Shift key just after you heard the start chime. Keep it pressed until you see the grey apple. See if the folder is gone or can be moved.

I am trying to upgrade my hard drive in my mac book pro using the disk utility in an attempt to clone my old hard drive. I can only get so far, just before cloning may start and receive an "error 254" and can go no further. Any idea what this error is?

I am trying to upgrad the hard drive in my mac book pro using the disk utility in an attempt to clone my old hard drive. I can only get so far throughj the process where its about to start cloing when I get a message " error 254". Any idea what that means and how do I get around this issue so I can use my new hard drive? Thanks for your input.
Vince

Connect the HDD to your MBP. Open Disk Utility>Erase and drag the HDD icon inrt the Name field. The format should be Mac OS Extended (Journaled). Click on the Erase button.
Then try the clone process again. You may use Disk Utility>Restore or a third party cloning application such as Carbon Copy Cloner or Super Duper.
Ciao.

My videos on iPhoto no longer play ... the message reads OSStatus error -54. anyone any idea what this might mean?

Similar Messages

Maybe you are looking for