My videos open and show only quicktime logo
SO thats it. My videos that I open show only Quicktime logo and the audio works normally. I have updated to the latest version and have a ipad 4. How do I get my video back?
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
Similar Messages
-
my ipad is taking restart automatically and screen is fully balck and showing only apple logo.please give me solution for that
Have you tried a reset first? If it works, you won't have to go through the restore process.
Hold down the sleep (upper right hand top) and the home button at the same time. A slider will appear. Ignore it and keep holding down the buttons. The Apple logo shoud appear. Then your ipad might work again. It takes a good 15 seconds. You will not lose anything on your ipad.
If you try it a couple of times and it doesn't work, you might have to go through the restore process as has been suggested above. But follow the steps so you don't lose your data.
Hope this helps. -
i am trying to reset my iphone 4s with all original seting when i have done all procedure it has gone blank and showing only apple logo and i cannt off or on and not getting start.please advise/
try holding the home and power buttons at the same time for about a minute!
-
Ipad is black screen and showing only a logo and updating bar.
I just downloaded new ios in itunes and updated my ipad 3G. But during updating itunes encountered a problem and closed. When I reopened the itunes and connect my ipad again, my ipad cant connect to the itunes and still showing only a logo and updating bar. Could you please share me some ideas?
You probably have to put your iPad into recovery mode now in order to restore the iOS software to fix this problem. This will explain how to do it.
If you can't update or restore your iOS device - Support - Apple -
I was erase all contect and data after it it showing only apple logo from last 2 hour i need help
i was erase all contect and data after it it showing only apple logo from last 2 hour i need help
You should reset your iPhone,
Reset your iPhone by pressing the 'Sleep' and 'Home' button at the same time for about 15 seconds or so. Your iPhone will then go through a reset / reboot procedure and will be ready for use within about a minute.
Don't worry about doing this as you will not lose data or settings.
Good luck and do report back. -
My computer
Problem description:
My macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
EtreCheck version: 2.1.8 (121)
Report generated 31 de março de 2015 18:29:15 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1333 MHz ok
BANK 1/DIMM0
8 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 250
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
Disk Information: ℹ️
Hitachi HTS545032B9A302 disk0 : (320,07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[running] com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
iTunesHelper UNKNOWN Hidden (missing value)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Stickies Application (/Applications/Stickies.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 8 Update 31 Check version
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
AdobePDFViewer: Version: 10.1.13 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
npsf_cef: Version: sf 3.3.1.1 [Click for support]
Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
DivX HiQ
DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
MacFUSE [Click for support]
Perian [Click for support]
Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
Destinations:
Time Machine Backups [Local]
Total size: 999.86 GB
Total number of backups: 60
Oldest backup: 2012-07-15 01:16:54 +0000
Last backup: 2015-03-29 19:28:06 +0000
Size of backup disk: Excellent
Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
97% rapportd
3% WindowServer
1% mds
0% fseventsd
0% distnoted
Top Processes by Memory: ℹ️
155 MB Safari
120 MB Finder
86 MB rapportd
86 MB WindowServer
69 MB mds_stores
Virtual Memory Information: ℹ️
12.56 GB Free RAM
2.53 GB Active RAM
428 MB Inactive RAM
1.66 GB Wired RAM
1.04 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 31, 2015, 06:00:15 PM Self test - passed
Mar 31, 2015, 01:13:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
Mar 31, 2015, 01:05:42 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
Mar 31, 2015, 12:24:33 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
Mar 30, 2015, 05:45:38 PM /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
Mar 30, 2015, 01:52:07 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
Mar 29, 2015, 05:55:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
Mar 29, 2015, 01:06:38 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
Mar 29, 2015, 01:02:47 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hangOpen Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Is there a way to create a thumbnail for QuickTime videos on a PC? (Windows XP) All the the videos currently have the same QuickTime logo as their thumbnail.
Abdur,
In the sheet :: table :: cell that is going to receive the data, type an equals sign, then click on the cell that the data will come from and press Return.
This will require that you navigate to the origin cell by choosing the proper sheet.
Jerry -
My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
The game "horn" does'nt open and shows installing but nothing happens. it was transferred from the computer to the ipad. help!, The game horn does'nt open and shows installing but nothing happens. it was transferred from the computer to the ipad. help!
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
Cheers, Tom -
Envy 100 printer. screen shows only hp logo doesn`t respond to touch
envy 100 printer screen shows only hp logo. Doesn`t respond when it is touched.
Hi artie11235,
I understand the front panel of your HP Envy 100 is unresponsive and you are only able to see the HP logo. Please start here: The HP Printer Won't Turn On or Respond When the Power Button is Pressed. If you have completed all steps listed here with no success, I suggest calling our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www.hp.com/cgi-bin/hpsupport/index.pl
I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
Iphone showing only apple logo on screen, iphone showing only apple logo on screen
iphone showing only apple logo on display
Hello!
Since your iPhone has hanged on you follow these steps
Hold the Home button and the Sleep/Wake button until it switches off, do not let go,
Keep holding until you see the Connect to iTunes symbol
Now you can let go and plug in your iPhone to your computer and restore from backup!
Hopefully I resolved your issue -
My Ipod keeps restarting and showing the Apple Logo over and over....
PLEASE HELP ME!!!! My Ipod keeps restarting, or turning off, I'm not sure which, but when it does that then it shows the Apple Logo, it will go to the main screen for maybe 1 second, but then it does this cycle over again. It has been doing this for a while now. It is also unresponsive, I and tried the R things but they didn't work either. I have tried plugging it up and it hasnt helped, I have no idea what to do. Oh and I havn't dropped it or anything, I have taken very good care of it. The only thing I can think of that ould be wrong with it is that my Dad had it plugged into his car radio, he says it started doing this action while it was plugged up to that, but I have no proof of that. He also plugged it into his computer, which has none of the Itunes software on it, to try to download my songs onto his computer, he says all the songs copied to his computer just fine. I plugged the Ipod into my Ihome and it froze up, when it unfroze I saw that I had all of my songs, but then it started to Turn off and show the Apple Logo. If you have any suggestions please contact me!!!!
Genug geweint -
nach 3 Wochen funktioniert es wieder-I fixed it, after 3 weeks
leider kann ich nicht sagen, an was es liegt/
sorry, but I am not able to tell you what the problem was
Da es jetzt geht, ohne dass ich an Vista etwas geändert hätte, vermute ich, dass eines der Apple Programme des Fehler verursacht.
I did not change anything with Vista but it works now. Though I think the failure occured because of one of the Apple products.
Schritt für Schritt / step by step
1. iPod auswerfen / diconnect your iPod
2. holen Sie sich alle wichtigen Windowsupdates/
update your windows
3. holen Sie sich iTunes noch einmal aber installieren Sie es nicht/
download iTunes again, but don't install it.
4. deinstalliere alle Appleprogramme
(ich nutze nur die 6 Apple Programme, die zwangsweise mit iTunes installiert werden, ob es Sinn macht auch Safari zu löschen kann ich nicht sagen,weil ich es nicht nutze,aber vielleicht sollte man alles rausschmeißen)
deinstall all Apple-software
(I use only the software wich comes together with iTunes. I don't use safari. You might deinstall it as well, if you use it on a PC)
5. Verbinden Sie den iPod mit dem PC
Ohne iTunes hörte der "Kampf" zwischen Windows und iTunes auf (logo!).
Solange der iPod davor verbunden war gab es Fehlermeldungen sowohl von iTunes als auch von Windows und der iPod flog bei beiden Systemen raus. Jetzt ließ Windows den iPod in der Liste der angeschlossenen Geräte. Ich habe ihn neu formatiert und dann ausgeworfen.
Connect your iPod.
Without iTunes the struggle between windows and iTunes was over.
As long as iTunes was installed and a iPod was connected I got a notice of a failure from iTunes and windows. both of them disconnected the iPod. Now windows kept the iPod an I was able to format it, then I disconnected it.
6. Da ich keine Zeit mehr hatte habe ich den Computer heruntergefahren und erst mehrere Stunden später wieder angemacht. (ob das spätere Hochfahren von Bedeutung ist werde ich wohl nie erfahren, ich erwähne es nur, um möglichst keinen Schritt auszulassen)
I drove down the computer and turned it on again after a few hours. (Is it necessary to wait a few hours? I don't know. I mention it only)
7. Installieren Sie iTunes / install iTunes
8. starten Sie iTunes / start iTunes
9. verbinden Sie den iPod mit dem Computer / connect your iPod with your PC
Bei mir haben die Fehlermeldungen aufgehört und ich konnte das "kaputte" Gerät wieder mit Musik, Filmen und Hörbüchern füttern.
Ich hoffe es klappt auch bei Ihnen.
In my case there were no further messages of a failure. I got music, movies and audiobooks on my daughters iPod.
Interessieren würde mich schon, warum ein System plötzlich spinnt, obwohl ich "außer" updates nichts verändert hatte.
Why happened it??? -
I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?
Click here and follow the instructions.
(98897) -
Whenever I try to open Microsoft Word it doesn't open and shows me an error report!
Whenever I try to open Microsoft Word it doesn't open and shows me an error report! I don't know what to do! Help!!!!
This is the extra info that comes along with the error report:
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_BAD_ACCESS
Date/Time: 2013-08-30 16:41:14 -0400
Application Name: Microsoft Word
Application Bundle ID: com.microsoft.Word
Application Signature: MSWD
Application Version: 14.1.0.110310
Crashed Module Name: MBURibbon
Crashed Module Version: 14.3.4.130416
Crashed Module Offset: 0x000072f0
Blame Module Name: MBURibbon
Blame Module Version: 14.3.4.130416
Blame Module Offset: 0x000072f0
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Crashed thread: 0
What should I do??????It might be a good idea to also ask here:
Office for Mac forums -
How to open and show dialog "Save" in jsp
Hi all,
I write a program which open and show all file type. If browser can open -> open and show this file, if can not open, the program must show dialog "Save". How I can check browser can open a file ?
ThanksHow I can check browser can open a file ?You cannot.
You can decide to let the client choose the option to save or open the file itself. Change the "content-disposition" in the header to "attachment". Then the client will always get a "Save as" dialogue.
Maybe you are looking for
-
TS1363 Our two iphones are no longer recognized on iTunes
Our two iphones are suddenly not being recognized on iTunes. In fact, when we go to "file", then "devices" and try to click on something under devices, it won't let us, i.e. nothing happens. Tried deleting iTunes and uploading again. Still did
-
GOT A MANY TROUBLES AND CRASH ON MY MBP 2011, MANY KERNEL ON MY MAC, WHAT'S ABOUT ? THE COMPUTER RESTART, AND STOP WHEN I WORK SINCERLY YOURS
-
How to reset security questions and answers???, How to reset security questions and answers???
I'm trying to purchase an app on my iPod touch for the first time and it is asking for my security answer and I don't remember what I put.... ANY IDEAS QUICKLY
-
HT201401 Problem with my iPhone 4S volume, my phone will vibrate but won't ring...
I Have a problem with my iPhone 4S volume, my phone will vibrate but won't ring. IS IT EASILY REPAIRABLE?
-
IPHONE WON'T SEND YAHOO EMAILS
I have an Iphone 4S version 6.0. In the past couple days my phone will not send yahoo emails. I updated to 6.0 as soon as it came out and it has worked fine until 4 days ago. I can still receive them from what I can tell. I had this problem a few d