My videos stop rendering/exporting at 80% any help?

When using premiere pro cc I can edit a video just fine. Then I get to exporting and every time without fail it stops working at 80% and the entire program just shuts down. Like when a program stops responding. I use windows 7. 8 gigs of ram GTX 590 video card latest drivers and an i7 3770k intel processor at 3.5ghz. My cpu usage never gets too high for my pc. I've tried updating all my drivers, uninstalling reinstalling, changing render settings, and nothing works. Am I missing something?

I found a solution to export an hour long doc that worked with Premier CC,
File > Project Settings > General > Renderer
The Renderer is set to default as: Mercury Playback Engine GPU Acceleration (Open CL)
Change this to: Mercury Playback Engine Software Only
After weeks of exports failing at 80% changing this setting worked and it spit my MPEG2 file out in no time.
Hope this helps

Similar Messages

I am importing a video and in iMovie the video is now white. the audio still plays and I can play the video properly outside of iMovie so any help is good?

I am importing a video and in iMovie the video is now white. the audio still plays and I can play the video properly outside of iMovie so any help is good?

I going to recommend again, downloading and installing some video helper applications.
1. http://perian.org/ (this will add a number of different file types to the ones QuickTime already plays)
2. http://www.divx.com/en/software/mac (will add more file types to what QuickTime can play)
Either one of these might be necessary to get MPEG Streamclip to export the video. Failing that the only other thing I have found is an obscurve discussion thread on Avid.com:
http://duc.avid.com/archive/index.php/t-277791.html
I've figured out what the problem is on my end. The video came from Avid on a Windows machine and was encoded with Squeeze. I found out that the 2 seconds of black at the top of the video were at a different frame rate than the rest of the video. I chopped off the 2 seconds of black and started at the first frame of video, exported it with Quicktime Pro and was able successfully view the video in ProTools. Apparently Squeeze will let you create a movie file that has different frame rates within the same movie... This fixed my issue that was exactly as you describe, hopefully it might work for you.
Lastly, you could try converting the video clip using HandBrake

When i move a clip into the top project screen, it cuts off about an inch of video. im trying to make a chin face video so i need that inch. any help?

when i move a clip into the top project screen, it cuts off about an inch of video. im trying to make a chin face video so i need that inch. any help?

1) Make sure that your project is in the same aspect ratio as your camera. If your camera shoots 16:9. make a 16:9 project.
2) Check the clip inspector for the clip in your project to see if Image Stabilization is turned on. Stabilization works by zooming in, so you may want to turn it off.

My ipod 4g external speaker has been working on and off for the past few days since christmas. 2 days ago it was working all morning then in the afternoon in the middle of watching a video it just stopped. it hasnt worked since ): any help?

My ipod touch was given to me from apple refurbished and still with ios 5.0.2 after owering it on for the first time and updating to 6.0.1 it was functioning normally and i was using it just fine. i had just begun to use itunes and i bought some music and after playing about 3 or 4 songs aloud from the external speaker it stopped working. just like that. i looked over the internet about other incidents like that but then after thaty i returned back to my ipod and began playing Tron and the sound worked fine! i exited the app and it played my music just fine too. then the next day it went out again and no sound was being played. i left it alone and after about 2 or 3 hours i came back to it and it played sound again. the next day it went out in the middle of watching a video i had just taken. it hasnt come back on since. any help/suggestions?? anything plz..

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself

HT1725 My movie rental wont complete download. stops at 1.52gb everytime. any help please!

I tried renting batman dark night rises, but everytime it downloads it stops at 1.52gb and won't go any further, anyone know of any help?

Alright, since NO ONE can help me, how about this ....
How do I email iTunes CS & appraise them of this event?

Have quick time on windows 7 and can not rotate or flip the video sent to me from friends any help on this thanks.

Have a windos usung Quick Time and friends sending videos to me that are sideways and upside down. Any way to flip while watching from Quick Time.
Some are from a MAC computer and can not turn them to watch them the right way. How do i do this thanks.

I have purchased Quicktime Pro and when I use the rotate button under Show Video Properties-Visual Settings, the viewing screen rotates from portrait to landscape but the video itself does not rotate. Any suggestions as I have a lot of unusable video which I want to pull into my video editor.
BTW, my Studio 15 which is a fairly high-end software has successfully rotated previous videos shot with my wifes I-Phone 4 but on these video clips, the rotation works but then does not play. I wonder if it was some setting or problem with my wife's Iphone?

My iMac os 10.7.4 Lion purchased 2/12 has jerky videos. I've tried watching you tube and other videos with Safari and Google Chrome and sometimes they don;t jerk but most of the time the spinning globe appears and the video stops for a few seconds. Help

my iMac os lion 10.7.4 has jerky videos. I've tried YouTube videos with Safari and Google Chrome and the spinning globe appears and the video stops for a few seconds. I can't watch the white house weeklky address because it stops and starts every few seconds. The software is up to date. Just bought this thing in February 2012. Can anyone help me?

Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine. Might also apply to new machines w/o AppleCare.

10 Videos, 9 menus....any help?

I have 10 videos and 9 menus. The Menus will say "Did you understand what you just viewed?" The person watching will answer Yes and go to the next video or No and watch the previous video. I need the first video file to play, then the Yes or No menu that I now have....Yes leading to video 2, No repeating video 1, then after video 2, another menu pop up with Yes leading to video 3 and No leading to video 2, etc, etc. Then at the end I need a form to pop up with time and date stamp for the person to enter their name and print. This is a freebie project and any help would be greatly appreciated. Any tutorials on basic flash stuff like this?

I went to redpluim.com and selected Printable in the tabs along the top. I slected a coupon randomly and clicked on the "printer" icon. The website automatically began downloading the print driver to my hard drive and I was presented with the following:
Afer upgrading to Mavericks or any other version of OS X, the coupon print driver has to be reinstalled in order to print coupons My wife prints coupons all the time and this is a "normal" occurance after a software upgrade. The print driver downloads to the Download folder. If it does not auotmatically present you with the option to install the driver, you may have to go into the Download folder and find the file. Double click on it and you should be presented with the Install option.
Message was edited by: Joe M

I have a ipad 3 with ios 5.1.1 and it will not update to ios 7. I keep getting a software failed message and the download takes 13 hours and stops half way through. Any help?

I have an ipad 3rd gen with ios 5.1.1 and I can not update it to ios 7. It will take 13hours and when I try it stalls out halfway through and says software update failed. I have tried everything. Any help?

it actually needs more space than that. The file size is your 65 mb is probably the ota incremental file size. The full package is 700 mg, and the system needs 3 gig of free space to unpack and install.
There is a fairly good discussion here
https://discussions.apple.com/message/23680750#23680750

IMovie Full Quality Export Video Stops As Audio Continues. PLEASE HELP

Im making a video of my camping trip, and I tried to export it using the Expert Settings. When I watched it, it stopped about 1.5 minutes in. The video freezes but the audio continues. I really need this video up soon! If you've experienced this and know how to fix it, please help! I used a Canon SD1000 to record, I have a macbook core duo with 1 GB memory, 60 Gig Hard Drive, and iMovie HD 6.0.3.
Thanks a bunch!
-Chris

Hi OK
Then there is sufficient space
And no external hard disk that interferes.
Then I would try to delete the iMovie pref file
iMovie
-->/Users/YourName**/Library/Preferences/com.apple.iMovie.plist
and
-->/Users/YourName**/Library/Preferences/com.apple.iMovie3.plist
and see if a new export will work
(to make this easy one might just start a new account (log-in) and use this and re-try)
- other thoughts:
• versions: Mac OS X.4.9 and iMovie 6.0.3 AND QT ????? 7.1.6 ?
• Running (Apple Disk Util tool): Repair permissions and Repair hard disk
might help (second one needs start from CD/DVD or external hard disk)
Yours Bengt W

Video error when exporting from slideshow - any fixes?

When I try to export video from the LR Slideshow module I always get the same error msg:
- Cannot create encoder instance, h264OutVideoNew failed
- error: h264OutVideoChkSettings - no library function available
- error: No encoder library could be found!
Can anyone help me remedy this?
Thanks,
Dennis

There's another thread here discussing the same error message, though not in exactly the same circumstance:
http://discussions.apple.com/thread.jspa?threadID=2212899&tstart=0
Perhaps something in that thread will help you.
Good luck.
Message was edited by: Dave Sawyer

Using My Digital Video Camcorder and Quicktime...any Help???

I recently purchased a digital camcorder that I am trying to get to work with my Mac. I also just purchased Quicktime 7.0.4 PRO which I am hoping can convert the files from my camcorder to a viewable Mac format.
I am using OSX 10.4.6. The camera is a DXG-305 and the software written for the camera is for PC only. When I connect the camera to my Mac I get a folder to pop up of whatever I have captured but it shows files that are in a .ASF format. When I click on the file to try to open it , it wants to open in Microsoft Windows. When I go into Quicktime PRO and under File try to "Open File"- the file does not even become highlighted or selectable? Is this a file that Quicktime PRO is not able to open? If not, is there anyway that I can convert this file to one that I can use on my Mac? Is it possible to upload from my camcorder via the included USB cable and convert directly through Quicktime PRO? I am looking for ANY solution to this dilemma? Thank you-
John

Is this a file that Quicktime PRO is not able to open?
Yes. Your camera's native video format is MPEG-4 and appears to possibly be "muxed" with MP3 audio.
If not, is there anyway that I can convert this file to one that I can use on my Mac?
Try installing the free Flip4Mac component. Then try playing the .asf file in the QT Player.
Is it possible to upload from my camcorder via the included USB cable and convert directly through Quicktime PRO?
If your file plays using the Flip4Mac player component, you may then wish to consider purchasing full conversion codec which will allow you to export your DXG-305V files to any frame-to-frame synchronized QT compatible format in QTPro.
ADDED: Sorry about the duplication, too slow with my response.

After I downloaded the most recent versions of itunes and quicktime I cannot play any videos, tutorials. Thank you for any help.

Videos will not play after downloading the mmost recent versions of Itunes and Quicktime. What can I do? The video tries to start but freezes and does not respond.

Appreciate the suggestion. I did the repair, but videos still don't play.
I tried putting quicktime in "safe mode", but that also did not solve the video-play problem.
However, I downloaded a video and that video does play.
A video may start but quickly freezes.
In itunes is the player "quicktime or itunes"?
When I open the quicktime player(its appearance doesn't look like a player with controls for play, pause, etc.).
Maybe the controls appear when play begins' however, then I try to open any song of video, I always get the same message: "Do you want to allow this website to open a program on your computer(in itunes, I assume).)
If i choose "yes" I get an error message.
I thought this additional information might be helpful, but you can just answer the original question if you have some additional ideas.
Thanks for your help.

Video Playback Error In iTunes. Any Help?

Hey. I just got a video from the iTunes store (TV Show), and it won't display on my pc. It plays just fine on the iPhone, but on the monitor it shows up as a green screen with pixelated sections. No audio, no video. Any suggestions? I've already tried everything in support.

Hey sb521,
If you can play other videos in QuickTime Player like the Movie trailers available through QuickTime or FREE ON iTunes content. The issue may be with the content you've downloaded. You may have to contact the iTunes Store support group: http://www.apple.com/support/itunes/store/browser/
If you cannot play the FREE ON iTunes content or Movie trailers in iTunes or Quicktime PLayer, the issue may be related to the software on your PC.
Make sure you have the latest version of DirectX, this article has a link.
http://docs.info.apple.com/article.html?artnum=24382
You also may want to try uninstalling any codec packs or QuickTime plugins that you've installed.
Jason

I get motion drag when i compress my video into appleprores 422 and 422HQ any help on how to reduce this?

ok so when i compress my video into apple prores 422 and 422 HQ i always get drag on the image when it moves? and i know it not the image as it works fine on tape and in FCPX itsself? is there a special setting i have to use to reduce this? or is my video file bad?

You posting in the FCP7 forum.
I would consider sharing one or more of the following when asking for help:
Souce footage codec, pixel dimensions
Sequence codec & pixel dimensions
How are you exporting it?
What kind of file are you ending up with? codec, size, etc.

My videos stop rendering/exporting at 80% any help?

Similar Messages

Maybe you are looking for