My virtual printer has an error status

i have just downloaded the adobe createpdf virtual printer and have just used it to 'print my first document' however the document is still in the que for the printer and has a status of 'error' i have called tech support but i dont think they are open at the moment and im doing an assignment in MYOB that requires a virtual printer.i have a laptop with windows 7 on it. if anyone could help that would be awsome.

You may use following forum:
http://forums.adobe.com/community/createpdf?view=discussions

Similar Messages

Message has a error status on outbound side

hi all
when iam doing bpm alert , in sxmb_moni iam getting the message
"message has a error status on outbound side" error flag is coming.
Regards
Raju

HI,
Check receiver agreement and reciever determination.
Regards,
AKshay.

My printer has a error of Oxc19a0025

my printer has a error of Oxc19a0025

This document may offer some help:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01953073&tmp_task=solveCategory&cc=us&dlc=en&lc...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Virtual Machine has aborted error during Java EE SDK install

Hi all,
I'm trying to install java_ee_sdk-6u3-jdk7-windows-x64.exe on our new Windows Server 2012 machine but the installer starts and I then get a Setup box appear that says Error: The Java(TM) Virtual Machine has aborted. I've looked in the Event Viewer and there are no messages and I've tried to get the installer to create a log file (by passing the parameter -l <loglocation>) but it doesn't seem to get that far as no log is created.
The very first time I tried to run the JavaEE install on this machine, it installed everything ok but didn't create the windows service as .NET Framework 3.5 was missing. So I uninstalled JavaEE and added in the .NET Framework 3.5 and then my problems began. I have already installed these versions of Java and JavaEE successfully on a previous Windows Server 2012 machine which had the .NET Framework 3.5 on it.
The JRE installed already on the computer is jre-6u45-windows-x64.exe and I am logged in as an administrator. I've tried uninstalling the JRE and reinstalling and also doing a registry clean using CCleaner incase there are any old references to the JRE/JavaEE but it didn't help.
If anyone can give me any clues as to why this error is appearing I'd be most grateful!
Thanks,
Caroline

Have finally got this to work after a lot more headscratching. Turned out just passing the path to the JRE to the install wasn't good enough, I had to include the drive letter too even though it was on the same drive!

Printer has communication errors?

What do three dots over the bluetooth symbol mean?

You can also try resetting the printing system.
OS X Mavericks: Reset the printing system

Message has error status at outbound side File To Idoc Scenario

hi ,
In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
Please suggest what may be the problem ?
Regards,
Rohit

1. First check the RFC destination name used in receiver Idoc adapter communication channel.
2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
Regards,
Prateek

BPM Error: Message has error status on outbd. side

Hi,
BPM overview:
Receive Step -> Transformation Step (1) -> Send Step ASYNC (1) -> Send Step SYNC (1) -> Transformation Step (2) -> Container Operarion Step (1) -> ...
Error Message in SXMB_MONI: Message has error status on outbd. side
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC*</Trace>
<Trace level="1" type="T">select interface namespace urn:tranbpm</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface AI_BPM_TRAN_EMP_DETAILS_FILE_ASYNC*</Trace>
<Trace level="1" type="T">select interface namespace urn:tranbpm</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
</Trace>
I am don't any Interface name MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC* in my scenario, the actual interface name is MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC does BPM adds a '*' at the end of the interface name.
In the workflow log it shows that "Transformation Step (2)" has error. I am using multimapping in the transformation step.
Any help would be greatly appreciated as I ran out ideas to fix this issue.
Thanks in advance.
Sarvesh

The issue was with the step "Transformation Step (2)" and I fixed it in the mapping.
When using two send steps "Send step (1)" & "Send step(2)", BPM is executing the second send "Send step(2)" before it completes the first send step "Send step(1)". The first "Send step(1)" inserts the data into the database table and the second "Send step(2)" retrieves the data inserted in the first send step.
If I insert a "Wait step" between the 2 send steps it working. Can anyone explain how the send step in BPM works.
I did post the same question in "Exchange" forum also so that it can be view by more people.
Thanks,
Sarvesh

BPM Scenario: Message has error status on outbound side

Hi All,
        I am doing one BPM scenario. In my scenario i am collecting 12 different type of idocs in BPM and bundling these idocs and sending these to the 12 different files.
        If i send 12 idocs from the R/3 then my scenario is working perfectly fine. If i send less than the 12 idocs that time i am getting the error message as "Message has error status on outbound side" with red flag.
           Can you please explain what minght be the problem. I have already checked in SM58,SMQ1 and SMQ2.
Thanks & Regards,
Purushotham

Hi Nutan,
        I hv configured my scenario as follows
1. Start
2. Block ( Deadline and Control step for cancell the process)
   3. Fork(Necessary branches 12)
      4. Loop(12 loops)
          Under loop
          a. Receive Step
          b. Container Operation( For count)
          c. Container Operation(For append)
5. Fork( Necessary branches 12)
    6. Transformation
    7. Send
8 Stop
This is my scenario. In the first Fork step i am checking end condition as total number of idocs is reached then i am sending all the data to the target system. If the idocs are not reaching with in 1 hour then i am cancelling the process.
        Now can you please tell me what is the problem.
Thanks & Regards,
Purushotham

Message has Error status on outbound side - in ABAP inbound proxy !!

Hi All,
One interesting question for you guys. I have got one of the scenarios like File to ABAP inbound proxy. Message are going properly, no errors in receiving system. But on PI moni I can able in "outbound status" column in red colored flag. No all the messages couple of them with u201CMessage has Error status on outbound side ". Why please?
Regards
San

Hi ,
Please check whether the correct data is coming from sender side . and check the j2ee engine runtime parameters.
Cheers,
Meera
Edited by: MeeravaliDudekula on Oct 18, 2010 2:36 PM

** BPM Error - Msg has error status on oubound side

Hi Friends,
I am doing BPM scenario. (Receive Step --> Transformation Step --> In Block (For each) Synchronous Send Step ). That's all BPM design.
We have created Server prox (inbound Proxy) in ABAP, it receives PO details and return Sales order no. Coding has been written inside Proxy. If we test Proxy in ABAP, it is working fine.
The required PO data we pass from JDBC. Receive step receives the whole message (It may contain 1 or more PO). In Transformation step, we split message using multiline checkbox( One message per 1 PO).
Message is processed successfully upto this step. In the Synchronous send step, it throws an error.
In SXMB_MONI, 3 messages are generated. In the first message itself, in the outbound status column 'Red Flag' is coming, (but processed successfully). The error is 'Message has error Status on outbound side'. Inside the message 'PE' adapter is in grey color.
So, what could be the problem ..?
Kindly reply, friends.
Kind Regards,
Jegatheeswaran P.

Hi Jegatheeswaran,
Take the Message after transformation and try to test your synchronous service with this message,
if u r using any web service you can use Altova (XML SPY) to test your service with the data after
transformation.
If it does not show any problem then try to see you have build your BPM Properly (Press F7 to test For any syntactical error).
You can also go to SXI_CACHE to see if your Workflow does have status 0 .
To get Exact error Message . Click on PE ->goto->ThechnicalSetting->select synchronous call->click on content tab->and go on navigating you will find detailed exception.
Reward Points IF Helpful
Thanks
Sunil Singh

Message has error status on outbd side

Hi,
I am doing File to IDoc scenario, in SXMB_MONI i am getting the following error "Message has error status on outbd side". I am not using BPM and this interface was working fine earlier .
Any clues!!!!!!!!!!
Regards
Swatantra

Hi Vijay,
Cross check whether you have done these:-
SLD-
1) Create a Product/Software Component
2) Technical System pointing to R/3 system
3) Business System for the above technical system
In the Repository
1) Import the Software component created in the sld
2) Create a namespace,
3) import the idoc and then create sender data type/message type etc and mapping
4) Mapping Rules is depends on the requirement
In the Directory
1) Create a Scenario /import the business system
2) Create Receiver/Interface determination
3) Create communication channels for sender and receiver
4) Sender Agreeement and Receiver Agreement.
Then the file adapter configuration is depend on the input file format.
Also you need to have Logical destionation created in the XI , and the IDX1 entry
In R/3 Port, Partner profiles etc should be created
Have a look into this document~
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
While doing an File -> XI -> IDoc scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you will need a sender agreement for the file.
4. In this configuration note that you will also need a receiver agreement for the IDOC.
For any File -> XI -> IDoc scenario ref:
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
Hope this helps.
Regards.
Praveen

Message has Error Status Outbound Side

Hi All,
I have one question.... we procssed one file from ftp it should creates Idocs in R/3 side we developed this scenario using BPM....it processed successfully inbound side but in Outbound side it is showing Red Flag (Error Meaase : Message has Error Status Outbound Side) and its not creating IDOCs in R/3 Side but in Process engine all steps completed Sucessfully and created Idocs in XI....i tried so many ways...like in Queues and Refreshed Cache and checked RFC connection in Both ways and checked passwords in communication channels.... i could't find any this....if any body help me on this....it would be appritiated.
This was i am testing on Test system i got this type of problem but in Development box it is working successfully we are using the same fuctionality and same code also i don't know why its happening.
Thanks,
Sudheer.

Hi,
Where are you find the Error and
> Process engine all steps completed Sucessfully and created Idocs in XI....
Can you explain in detail
Regards
Sangeetha

Message has error status on outbd. side (error in Moni)

Hello All,
Iam doing soap to idoc scenario, the scenario was working fine since long time....but yesterday we had an issue...we can see the message was sucessfully processed in XI monitor and RWB, but idoc not got created in sap ecc system.
when i checked in moni one column called Outbound status is in error status and the error is message has error status on outbd. side.....i checked the idx1, idx2,sm59......all settings are fine.
How to reslove the issue, please help me.
Thanks and regards,
Chinna

Hi
Please check the below i think your problem will solve
Hi,
Check whether IDoc was created:
1. Execute Transaction WE05; enter correct date/time parameters etc. If IDoc found in failed status, open status records folder and double click on the failed status records to get error message.
Check Whether IDoc is received by the Receiver:
2. Execute Transaction WE05; enter correct date/time parameters etc and verify if the IDoc was created or not and if IDoc is in a successful status or not. If the Idoc is in Status-30(Yellow), you can push it again through Transaction BD87.
3. If the IDoc is located and status is successful but receiver has not received the IDoc, Execute transaction SM58 to determine if IDoc is stuck in the ALE/RFC layer. If entries exist in SM58, look for Message Type
4. If message type exist and Run the Program "RSARFCEX". If after the RSARFCEX program has ran and IDocs are not in SM58, issue should be solved. Validate in receiving system via WE05 that the IDoc was received or not.
5. If IDoc is still stuck in SM58, check RFC connection. Go to SE37, enter function module RFC_PING. We need to have access to SM59 to test the RFC Connection.
6. After an issue has been resolved and/or you need to process an IDoc, besides processing IDocs via programs, you can also process IDocs via Transaction BD87.
Thanks ,
Meeravali Dudekula

HP P3015n that has an error message of 8BC5 1334 PRINTER ERROR in the event log. What does it mean?

An HP P3015n printer has received this error twice in 7 days.
Number Date and Time Cycles Event Firmware Description or Personality
26 2012-OCT-04 14:48 59082 49.2334 07.080.3 8BC5 1334 PRINTER ERROR
24 2012-SEP-27 00:07 57130 49.2334 07.080.3 8BC5 1334 PRINTER ERROR
Can someone tell me what it means?

An HP P3015n printer has received this error twice in 7 days.
Number Date and Time Cycles Event Firmware Description or Personality
26 2012-OCT-04 14:48 59082 49.2334 07.080.3 8BC5 1334 PRINTER ERROR
24 2012-SEP-27 00:07 57130 49.2334 07.080.3 8BC5 1334 PRINTER ERROR
Can someone tell me what it means?

HP PSC 2355 all in one --printer has no response, or has error messages

My printer has been slow or non responsive since installing on my new computer with Window's 7. The most current error message is Error: oxc18e000b 54019: Sweep_mgr_udw.e Any idea what this means?

Hi there,
Double check the content in this article. If you have been through all these steps the product may need to be serviced. If not give the steps a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

My virtual printer has an error status

Similar Messages

Maybe you are looking for