My voice is not transmitting to the other person while using speaker mode during a call in iphone 6 plus

I bought iPhone 6 plus last week, which came with ios 8.1 pre-installed, now when I call, my voice is not reaching/transmitting to other person on the call while talking on speaker mode but as soon as I turn off speaker mode my voice reaches to that person.
Another problem i

Hi kshitij 2589,
Thanks for visiting Apple Support Communities.
It sounds like you can't be heard on calls when using speakerphone. I know it can be frustrating to encounter unexpected issues with a new device.
I'd recommend going through these tips first, to see if they have an impact on the behavior you're seeing:
Test the microphone
To find out if there is an issue with the microphone itself—and not the app you're using or your cellular connection—test the microphone with the built-in Voice Memos app. Speak into the microphone and then play back the recording. You should be able to hear your voice clearly.
Follow these steps, testing after each with Voice Memos.
Unplug anything plugged into the headset jack.
If you're on a call and holding your phone next to your ear, speak into the microphone and make sure you don't block it with your fingers or shoulder.
If you're using a screen protector or case that covers the microphone, remove it. Clear any debris from the microphones.
Restart your device.
Update to the latest version of iOS.
If you've tried these steps and people still can't hear you well on calls, contact Apple Support.
You can find the steps above in this Apple Support article:
If your voice is too faint or sounds unclear using iPhone, or iPod touch - Apple Support
All the best,
Jeremy

Similar Messages

  • HT2515 What happens if our video chat is not connecting with the other person?

    What happens if our video chat is not connecting with the other person?

    Hi,
    Not really enough info to help constructively.
    Which Version of iChat ?
    Is it iChat to iChat or iChat to Messages  (i.e Mac to Mac) or AIM (iChat) to PC AIM  (needs to be a compatible version)
    Is this AIM to AIM (Includes AIM valid Screen Names from certain Apple IDs) ?
    Is it Jabber to Jabber (this can only be done Mac to Mac in Messages and/or iChat) ?
    Do you get any failure  message ?
    In the Video Menu > Connection Doctor > Errors tab do you get any info ?
    NOTES
    As mentioned it is iChat to iChat or iChat to AIM on a PC if the PC has a compatible version (which is not the latest)  (where it lists iChat it also means Messages in Mountain Lion)
    It has to be either AIM to AIM IDs or Jabber to Jabber IDs
    It cannot be Jabber to some GoogleTalk Web Browser Login (or Facebook)
    It cannot be Jabber/Google Talk to the PC app called GoogleTalk
    Google released an PC only App that will use Jabber protocols for Video (Called Jingle)
    Their web Browser Plug-in also uses Jingle for Video and Audio chat but iChat and Messages use SIP (Session Initiation Protocol) to connect.  The two are not compatible.
    Facebook also run a  Jabber server and have apparently released their Own Plug-in  which can cause problems of it's own on a Mac.
    However you also cannot video to a Web Browser Login on Mac or PC
    If this is iChat 6 it does not Video on the Yahoo Accounts  (that is Text Only)
    This means it cannot Video to any version of Yahoo on Mac or PC or any Web Browser method.
    10:27 PM      Tuesday; February 19, 2013
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Iphone 4s - how do I change the name in the contacts for the owner of the phone - it is coming up as the other person who uses the laptop - so when ringing or texting anyone 2 names are being used as the caller id on the screen

    Iphone 4s - how do I change the name in the contacts for the owner of the phone - it is coming up as the other person who uses the laptop - so when ringing or texting anyone 2 names are being used as the caller id on the screen

    *Ralph Johns* writes:
    "Your options are:
    Get a trial account form @mac which will work as an iChat name after the 60 days run out but not be a email account that is valid (And is free)"
    Do you mean a trial account from .Mac? (DotMac)
    "Get an AIM Screen name and set it to Display what you want as you set it up.
    The Screen name can be whatever yu want but you can also set it to display something else as well."
    I had thought about this, but it seems other people have already chosen the screen name "pinksharkmark" and virtually every variation of it I can think of. So that isn't an option for me. As for getting it to display something else as well, do you mean that if I were to get an AIM screen name like "CromulentCat" I could somehow log in to iChat under the AIM account "CromulentCat" yet get iChat to represent me to my Buddies as "PinkSharkMark"? Because I have to admit I don't see how that can be done. It appears as if iChat displays to anyone chatting with you precisely the account name you logged in under and nothing else. So if you logged in using a .Mac account, then you are displayed as "[email protected]" while if you logged in under an AIM account, you are displayed as "CromulentCat". But that's it that's all... there is no way to change CromulentCat to PinkSharkMark.
    Thanks very much for taking the time to reply, though.

  • I can't hear the other person while facetiming on the Imac

    I cant hear the other person while face timing on my imac but they can hear me

    HI,
    There have been similar issues with iChat and I will use that as an example first.
    In iChat the Mic needs to be On (in the Video menu).
    It also needs to be listed in iChat Menu > Preferences > Video section > Microphone Drop down and this needs to match ther Mic set up in System Preferences > Sound > Input.
    In addition to this the Mic needs to be "turned up" high enough in the System Preferences to work with the app.
    So If you Buddy cannot hear you it is your Problem when it comes to iChat.
    If you cannot hear the Buddy it is much more likely that they have not set up the Mic in System Preferences or have the Mic Off in iChat.
    Moving to FaceTime you will find a Mic Setting in the Video menu (if you have two or more Mics).
    If you do then the System Preferences > Sound > Input  and the volume setting there needs to match the choice in the App.
    As it is your contact that you cannot hear you need to get them to check their settings first.
    As for your end, it will be worthwhile doing a PRAM reset.
    Shut down the computer.
    Restart it holding down Apple/CMD ( or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
    9:06 PM      Thursday; June 27, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I can see myself and hear the other person while attempting to connect to face time but cannot see them

    New iPhone 4S. Attempting to use face time but it wont show the person I am attempting to connect with. I can see myself and hear the other person while attempting to connect to face time but cannot see them. Face time was working before.

    Hello Wollyt
    Check out the article below for troubleshooting FaceTime issue.
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/ts3367
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Does it cost me or the other person to use facetime using a mac and an ipad2?

    Does it cost me or the other person to use facetime using a mac and an ipad2?

    Thank you, also can i use the ipad and mac using the same email to contact each device

  • First name is not transmitted to the other system through Idoc

    Hi all,
    Here customer is created in R/3 system & then transmitted to the other system through I doc.
    Issue is first name is not transmitted properly or is transmitted but nit correct value.
    I checked the segments of respective i doc in we05 there i could see right values. But in target system it is totally wrong or the word 'CONSTANT' is coming.
    what could be the reason & where i can find it out.
    Please help me
    Thanks
    JM

    Hi
    The issue should not be in SAP. You need to check with the middleware system which reads the data from SAP and triggers an IDOC and sends it to the other system.
    Regards

  • Iam not able hear the other person voice while calling.

    hi there

    swonz wrote:
    I had Sony aked me to go to settings and select smart connect to delet all data. But it still had a problem. The headset jack and plug on phone are clean. One thing I believe that caused the problem is software update by Android on Lillipop. All calls on normal, WhatsApp, Viber and Line are fine for the earpiece and Mic. Only Skype for which the mic does not work. However, when I call the other person and he picks up the call, the mic works when I pull out the plug and reconnect the plug again. It works all the time that way. So it could be software for Andriod and Skype.Hi, we had the same problem on this new android version. I found a solution-need to remove the headset jack from mobile phone and then return it again then the other person can already hear you. if you do a call on skype with headset on it, the problem will happen again after the other person answer your call. then you need to remove again the headset and reconnect. hope it will temporarily solve our problem. but we need skype to help on this. 

  • TS4268 I can't hear the other person when using FaceTime

    I Am able to connect to them but all I hear is a crackling static sound. My iPad is unmuted and the volume is turned up, I am pretty sure it's not my Internet connection because I have never had a laggy connection. Any help would be appreciated.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    The other person could have dust in their Mic hole. Use a vacuum to remove the dust.
     Cheers, Tom

  • Cannot hear the other person when using Skype.

    When receiving a video message via Facebook (skype) cannot hear the other person. They hear me but I don't get any sound. Please help. Thank you.

    Both of you can take a look at this help Guide from Skype:
     Making a video call (Windows desktop)
    Kind Regards,
    Dragon-Fur

  • I can't see the other person when using facetime but they can see me just fine, how can i fix this?

    When I use facetime with my fiance on my brand new macbook air she can see me but I can't see her. Please help me remedy this problem, I have verified that I am logged into facetime and connected it with both my ipone5 and my email but haven't seen any changes.  It is a 1 week old macbook air and I'm assuming it has the latest iOS installed but don't know how to check as this is my first Macbook.  Thank you for your help

    Frogmanian wrote:
    It is a 1 week old macbook air and I'm assuming it has the latest iOS installed but don't know how to check as this is my first Macbook.
    MacBook Air does not run iOS.  It runs OS X (pronounced as in OS - ten).  You can check which version you have by clicking the Apple logo in the upper left of the menu bar, then "About This Mac".  The current version is OS X 10.8.4.  If you do not have that version, you can click "Software Update" just below the "About This Mac" entry under the Apple logo.
    Anyway, typically, the reason for the FaceTime behavior you're describing is a less-than-robust internet WiFi connection.

  • Can't hear the other person while calling

    Recently I found this problem where when I call with my best friend I can hear him but he can't hear me.
    The phone is not on mute and neither is his.
    We then both tried to call someone else and then we didn't experience any problemens.
    Then I called his friend who was standing next to him to test my phone and it worked flawlessly.
    So, I was wondering what it could be.
    I didn't have this issue with my old phone with the same simcard.
    Nor do I have it with Skype on my phone, so it isn't a hardware issue, it's purely the software.
    My friend read on some forum about a bug in Android 4.4.3 that if you call a person a few times it automatically is added to the favorites and then this bug would occur.
    Except I have updated to Android 4.4.4 and he has a OnePlus One phone which also runs on 4.4.4.....
    Any other people experiencing this problem?
    And can this bug be fixed soon, because it becomes very very annoying.
    Especially because my friend gets mad constantly because he thinks I'm not saying anything and he ends the call.

    I just tried it, didn't work.
    As I said it's only when calling this person.
    If I try to call someone else just after that call, it works just fine.
    Also when my friend tries to call someone else, it works fine for him too.
    We read about a software bug in the Sony layer with the favorites. Which only occurs on the Z models.
    That could explain why I can hear my friend but he can't hear me.
    The weird thing is, when I delete his number from my phone and just dial it manually, it also works perfectly.
    That is a work around for now, but it's annoying if I have to do that every time I want to call him.

  • HT201269 How do I take a phone off my iTunes after selling it so the other person can use it?

    I've upgraded and had my iPhone 4S unlocked but the new owner says it's linked to my Apple ID
    How can I unlink it so they can use it?

    Read here:
    http://support.apple.com/kb/HT5661

  • WHEN USING FACETIME, THE OTHER PERSON CAN SEE AND HEAR ME BUT I CANT HEAR THEM AND THEIR VIDEO IS A STILL PICTURES.. DOES ANYONE HAVE ANY ANSWERS???

    When using Facetime.. the other person can see and hear me, but I can't hear or see them.. Does anyone have any solutions?? The only thing I can see is a still picture of them

    Hi mduggan,
    Thanks for visiting Apple Support Communities.
    If the other person can't see you during a FaceTime call, first use the Camera app on the iPhone to make sure the camera is working properly. If you don't see an image when using the Camera app, try these troubleshooting steps first:
    If the screen shows a closed lens or black image, force quit the Camera app.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    You can find these steps and more information here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    If the camera is working normally, next troubleshoot FaceTime using the steps in this article:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/ts3367
    All the best,
    Jeremy

  • When I make a call or recieve a call, the voice of the other person is not heard. but speaker phone works. what could be the trouble. could you please help me in resolving this? iPhone 4, iOS 6.1.3

    when I make a call or recieve a call, the voice of the other person is not heard. but speaker phone works. what could be the trouble. could you please help me in resolving this? iPhone 4, iOS 6.1.3.i had purchased my iphone 4  factory unlocked from usa last month.i am from india so will any apple service centre help me for this issue?

    They will help you just make sure that you make a appointment before you go into the store. Also if the iPhone needs to be replaced and you are not within your year of hardware coverage, that is when they will ask you to pay a fee.

Maybe you are looking for

  • My remote iPad keyboard stopped working

    My remote iPad  keyboard stopped working

  • How to read the check box value in alv report

    hi experts, i m working on one alv report where i m using the check box for field selection in alv display. but i don't know how to read the only selected fields. wa_fieldcat-fieldname = 'BOX'.   wa_fieldcat-tabname = 'IT_HEADER'.   wa_fieldcat-selte

  • SAPSQL_ARRAY_INSERT_DUPREC   OBJECT_NUMBER_INSERT_VB

    HI, I am getting a short dump in ST22. The error is attached herewith: Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC Exception              CX_SY_OPEN_SQL_DB Date and Time          15.10.2009 14:47:15 Short text The ABAP/4 Open SQL array insert r

  • Read statement with repeated key field

    Hi Experts , We  are in the process of UCCHECK in an upgrade program and come across an issue with read statement using repeated key fields which is not allowed in a unicode compatable environment.             READ TABLE it_vbpa WITH KEY             

  • MIGO - NDR print indicator default to unchecked

    We would like to default the 'print' box in MIGO to always be unchecked when a user goes into the transaction.  There will be times when the user will check the box to print a label; however this will not be often.  Today, if a user checks the box, b