My volume bar looks really weird? What's wrong?

Macbook Pro Retina 15inch (Mid 2014), Processor: 2.5GHz Intel Core i7, Memory: 16 GB 1500MHz DDR3
When I try to adjust my volume, the volume bar looks really weird and there is something wrong with the graphics. Anybody know what's wrong?
Picture shown (attached) below. Thanks!

Looks OK to me.

Similar Messages

HT5569 My iPad refuses to join my home network, after I had connected to a local bar's network. What's wrong?

My Mini iPad refuses to connect to my home network. I was at a local bar last night and connected to their network automatically. When I came home, it wouldn't connect to my network. I have the big iPad with retina display also. It was connected to the network until I disconnected a few minutes ago. Then it would not longer connect.
Both iPads are running ios 7.0,4 Any ideas about what's wrong?
Many thanks for your help.
Hazel

Try to power cycle your router. Meaning unplug it, count to 10, plug it back in. Let it reboot and see if that helps.
You can also reset your iPad. Hold down the sleep and home keys for about 20 seconds until you see the silver apple. Let it reboot and try again.
If that doesn't work, go into the settings and wifi. Tap on your home network name and tell your iPad to forget it. Then exit the settings and go back in. You should see your home network again and try to join again.

What's wrong with my script?

Can someone please look to see what's wrong with my
navigation bar here:
http://www.simple-it.us/index2.html.
The links don't work.
At the top of the page you can download my files.
If you figure it out, please tell me in laymen's terms. Flash
is NOT my forte!
Thanks!
Michelle

Click on the top frame and open the actions window:
btn_home.onRelease = function() {
btn_home.getURL("");
The getURL needs a url inside of the quotes - something like
index.html

I just downloaded two songs that cut off and start the next one. what is wrong?

i just downloaded three songs i can usually do this at one time. the first one downloaded just fine, but the next two like cut off in the middle of the song and jump to the next one. it is really agrivating. what is wrong with it?

Assuming you are in a region where you are allowed to redownload your past purchases, delete the current copies from your iTunes library, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
tt2

How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?

How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?

Try reset all settings.
Settings > General > Reset > Reset all settings. It won't delete any data.

I have a macbook pro with OSX Mavericks 10.9.5 and some keys that are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it

I have a macbook pro with OSX Mavericks 10.9.5 and some keys randomly are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it, and I can't for the life of me figure out how to fix this. Can anyone help? of course this happened after my warranty expired.

**update**
I don't know if this will help someone but I am posting this for that purpose. In the past when I first had this problem, I'd read a post somewhere (sorry, long ago, don't have the link) where an individual was having the same problem and they stated that when the MBP got heated, that's when the keys would stop working, and they went into the MBP and jiggle some stuff around (a specific wire, I'm not electronically inclined so I know NOT of what they spake!). Well I didn't want to do that but it always stuck in the back of my mind. I had given up, really, and was planning to take my MBP to the apple store. But by chance one night I left my MBP on the floor where it's cool, and when I turned it on, the problem went - poof! It seems there was some validity to the post that spoke about heat, because my problems started when I would stream foreign dramas on my MBP for hours at night, and I would hear the fan going off all the time, and in the mornings, my "p", "enter", "0", ";", and all the function keys would stop working.
So, maybe try keeping the MBP in a cool place when it's off. Since I've started doing this overnight every night (keeping it on the cool floor, out of reach of any big feet), I have not had a single problem with my keyboard.
Hopefully this might help someone.

Dv5-1124ca volume bar not working

I've had my laptop for just over a month now, and every thing is fine minus the volume bar. Ever so oftent it will do something annoying like the display well stay up and it will continue to click and stuff, but that goes away when i press stop. Anyways now Im having another problem with the volume bar, when ever i try and use it it doesnt really adjust anything. Its acting kind of like a spring, it will go up a few levels then go right back to where it was. I've tryed reinstalling quick launch and quick touch, updating them, and even the recovery manager and dont know what else to try. Anyone have any suggestions?
Message Edited by syst3m on 02-09-2009 09:51 PM

This usualy happens when the quicktouch driver doesn't interact properly with the audio driver. Reinstalling both will almost always resolve this issue.
Click on start, in the start search bar directly above, type REC. This will give you the option to open Recovery Manager. In recovery manager, select advanced options. Select hardware driver reinstallation. Click Next, then Next agian. In the list of avalibale driver, select your Quicklaunch (or quick touch) drivers and reinstall them. Then select and reinstall your audio driver. This SHOULD resolve your issue. If it doesn't you might try going online and looking for an updated version of both.
-Good Luck

Volume bars and sound slider disappeared?

When I press the volume keys the thingy pops up like normal but the bars on the thingy are gone and it won't let me listen to music and it won't let any sound come out and I really need my alarms? I already reset it and I don't know what else to do. I can't watch videos either because the slider underneath the video that adjusts the sound is gone? It's so weird I don't even know

You can try a hard reset as a first option, but this is most likely a hardware issue. See here:
http://www.ifixit.com/Answers/View/68836/Volume+bar+has+disappeared+-+No+sound+i n+apps
https://discussions.apple.com/thread/3672166
Turn your iOS device off and on (restart) and reset - Support - Apple

My iMac is acting really weird lately....

So I got my iMac in 2008 I think. Around that time. So sometimes it's slow but it still works fine... Initially I had 1 GB of RAM and last year I got 3 more so now I have 4GB of RAM. (I don't know whether this may be related to my problem but I thought I'd mention it) My iMac has been acting unusually weird for a week or so. It starts up soo slow, it takes about 7 minutes. Yesterday it started up just fine though.... Today I wanted to start it up and I got to the desktop screen but the little applications on the top bar (the wifi, volume, language preference, caffeine etc) wouldn't all load (just a few of them were there)... and then I got the spinning wheel.... which wouldn't stop spinning... so I shut it down because nothing would work and I started it up again. No luck. I tried again and this time I was stuck for 15 minutes at the grey apple logo thing before I got to the desktop screen... Also, I have an app called Caffeine. A few days ago it disappeared from my top bar without having done anything... I use it so that the desktop doesn't go into sleep mode/screensaver mode... so I noticed the screen saver and I thought it was weird because I haven't had screen savers for years. The first time it started to act strange was a week ago, when I started the iMac and it told me to enter my apple ID and password - but I never logged out of it! This happened multiple times. Once, I entered everything correctly and it told me that it was incorrect. When I restarted, it got me right into my apple ID.. Also Chrome was asking me for a password for 'local items' - which is really weird because I never had something like that. Or at least never seen that before..... I also searched for viruses and repaired some permissions but it didn't change much... now it doesn't ask me to log into my apple ID anymore but it takes so long to start up... But once it's finished starting up it works flawlessly. I'm really worried. What's happening to my iMac?

Do the following:
Repair the hard drive and permissions using Disk Utility.
Backup your files to an external drive.
Boot from your installer DVD.
Erase the hard drive.
Reinstall Snow Leopard.
Upgrade Snow Leopard to 10.6.8.
Reinstall any third-party software from original media.
Restore your data files.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Drive Partition and Format
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. After formatting is finished quit Disk Utility and return to the installer. Complete Snow Leopard installation.
5. Download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8
The easiest way to do the backup step is to connect a formatted, empty hard drive of the same capacity or greater than your internal drive. Clone the internal drive to it.
Clone using Restore Option of Disk Utility
1. Open Disk Utility in the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

I tried to import a PDF of a line drawing into Photoshop Elements. The thumbnail looks fine, but when imported the file is empty. This used to work in the past. What is wrong and how do I solve this?

I tried to import a PDF of a line drawing into Photoshop Elements. The thumbnail looks fine, but when imported the file is empty. This used to work in the past. What is wrong and how do I solve this?

Hi
The value of the Channel Strip volume etc is not stored within the C Strip setting, as you have discovered.
If you really wanted, you could add a Gain plug to the strip, with it set to give the correct output level with the Fader set to 0
(Or just set the fader manually in MS)
CCT

Using iWeb to publish my mobileme photo gallery -really weird bugs help plz

I have a really weird problem and have tried searching the forums already with no luck.
I'm using iWeb09 to put mobileme photo album on my website. When I initially add the widget onto my page, the widgets will show a "preview" of what pictures are in the gallery if you hover your mouse over it. Later during the day, I'm not sure if I did anything to mess it up but that "preview" is no longer there. It's just a black box. It still works however if you click on it because it takes you to the mobile gallery.
The only way for me to fix it was to delete the mobile me album and create a new one. Then re-add the widget onto my iWeb.
This has happened twice to me already and I cannot figure out why it happens. I'm sorry if my description is vague. Please help.

There is no point in re-installing iWeb, because after you have published it really is not an iWeb problem - if there is something not working on uploading the files, then it is really nothing to do with iWeb after html pages have been created.
If you are using Fetch to upload, then you have obviously published your site to a local folder? If so, are the photos there when you look at your local site? If they are there when you publish to a local site, then it is an error in uploading and if photos do not show, it means that some things are not being uploaded to your server correctly.
Have you tried using Cyberduck instead of Fetch? Cyberduck or Transmit are two of the better ftp programmes to try.

Is My Iphone 3gs the only one that does this really weird glitch

ok i have a issue i looked everywhere and i did not see anything in the forums about this
when i am replying to a text message and auto-spell types something so i hit the back button/delete key to rewrite what i want to type and it does not delete the text it just goes over the letters and doesn't delete it and sometimes the cursor will just get stuck and sometimes the cursor when i am deleting text will keep going over the letters i am typing and doesn't do anything , so as i hit back/delete button on keyboard it just keeps going over the letters and does not delete its really weird, and this is my 2nd new iphone 3gs for a different issue, and they both did that.
what i want to know is if this is a hardware problem and should i take it in to get it replaced again which i hate doing,since i got a good iphone 3gs this time...has this happened to anyone else,or does this happen to anyone else
any help would great thank you

Well if it happened to 2 different iphones perhaps something is corrupted in your backup restore file. By restoring your new phone with this old backup restore file u may be copying over the problem.
Solution: Restore and setup your iphone as a 'New' phone instead of restoring from a previous backup. This should solve your problem.

Should my iPhone 1 (iOS 3.1.3) with Bluetooth 2.0 (Handset HSP?) work with wireless earbuds with BT 4.0 and the Headset (and Handsfree, A2DP, AVRCP) protocol? They pair and connect; status bar looks good. But audio always comes out the speaker. Thx.

Should my iPhone 1 (iOS 3.1.3) with Bluetooth 2.0 (Handset HSP?) work with wireless earbuds with BT 4.0 and the Headset (and Handsfree, A2DP, AVRCP) protocol? They pair and connect as expected (with a PIN); status bar looks good and shows Bluetooth active, and I even see the iPhone displays the battery levels of the wireless earbuds. But audio always comes out the speaker. (If I plug in wired headphones into the headphone jack then audio comes into the wired headphones, as expected.) I have rebooted the iPhone; I have had it forget about the wireless earbuds, and repaired and reconnected; I have reset all network settings. Thx in advance.
PS: I understand that more recent versions of iOS have a way to choose where audio output goes (speaker, headphone jack, Bluetooth device). Does this older version of iOS? I could not find an option or setting.

I've noticed this lately as well, with my iPhone 4. I couldn't confidently pin it directly on any particular iOS update, but my iPhone used to automatically connect up via Bluetooth with my Prius's handsfree feature, and now it doesn't. I work with a CE-based device at my job, with Bluetooth capability, and I used to test out that feature by having it discover my iPhone. This no longer works either.
What I have found (not really a solution, but it does work and may be a clue for Apple) is that if I simply go to the Settings app then the General -> Bluetooth screen and let it sit there, it will pair right up with my car within a few seconds. Bluetooth is always on, and always says "Now Discoverable" at the bottom of the settings screen.

Volume Bar!?

Hi,
Does anyone know what happened to the volume bar on the new iPhone OS 3.1? I have the 1st Gen iPod touch without the volume thing on the side, so basically, I can't change the volume right now.
Does anyone know how to resolve this issue?!
Thanks

thanks Sam, that's what I was afraid of. It would cost so much just to have it looked at (definitely older than the 1yr warranty) probably not worth getting fixed .
So, great excuse to finally 'upgrade' to an iPhone 3Gs!

HT201401 Volume bar - not working......

Hello, I have an IPhone 4 & suddenly my volume bar is empty. I can't adjust the volume, it doesn't have that line that you can get the volume set... In addition, I don't hear anything when playing music, YouTube, apps etc. I tried restarting, tried restoring, cleaned the charging bar etc.... What else can I do??? I saw many have exoerianced the same issues but no one had a solution... I a, from Australia but on holiday in Greece & they don't really have an Apple outlet around... Thanks in advance :) Sara

Basic troubleshooting steps right from the manual are restart, reset, restore from backup, restore as new. Try these steps in succession until your problem is resolved. If the problem is not resolved, then you'll need to make an appointment at the Genius Bar and have your phone evaluated by Apple.

My volume bar looks really weird? What's wrong?

Similar Messages

Maybe you are looking for