My volume buttons on the side of my I phone 4s doesn't work properly what do I do?

Hi-

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:       
iOS: How to back up           
- Restore to factory settings/new iOS device.
-  Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Similar Messages

  • My volume buttons on the side of my iphone4 quit working

    my volume buttons on the side of my iphone4 quit working so now i cant turn up my call volume is there another way like in settings or something?

    If the basic troubleshooting steps outlined in the User Guide don't help, then bring your phone into Apple for evaluation.

  • I could not turn up the volume on my iPad using the volume button on the side. Is there any way to fix this?

    I could not turn up the sound (volume) on my iPad 2 using the volume button on the side. This happens after I have reduced the volume to minimum using the same volume button. The volume indicator does not move up at all. Note: it was not on mute, so the issue seems to be the button.

    Try this and see if it works.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I have adjusted the settings to max and the volume button on the side to max, is there any other way to increase ringtone volume?

    I have adjusted the settings to max and the volume button on the side to max, is there any other way to increase ringtone volume?

    you can connect an amplifier to the 3.5mm minijack but it will require batteries or AC power to amplify of cause

  • The middle button on my iphone 4 doesn't work properly what can I do about it?

    the middle button on my iphone 4 doesn't work properly what can I do about it?

    Make an appointment with the genius and bring to the Apple Store.

  • My iphone 4s is updated to ios7.1 after that it shutsown when i insert the sim.if ther is no sim it was working properly.what can i do for this

    My iphone 4s is updated to ios7.1 after that it shutsown when i insert the sim.if ther is no sim it was working properly.what can i do for this

    Hi Ravihara,
    Thanks for visiting Apple Support Communities.
    If your iPhone is not working with a SIM card inserted, I recommend these troubleshooting steps:
    Try turning iPhone off and then on again.
    Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
    Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
    Restore the iPhone.
    If you still are unable to resolve this issue, contact Apple support for further assistance.
    From:
    iPhone: Troubleshooting No SIM
    http://support.apple.com/kb/ts4148
    Best Regards,
    Jeremy

  • The button on the side that turns my phone to silent does not work and niether does the up volume button.  I have tried restarting my phone, I did a soft reset, I checked all my settings, but nothing has worked.  Does anybody have any suggestions?

    Hello,
    I have an iPhone 4 and recently started to have some problems.  First, the button on the side of my phone, that puts the phone on silent is not working. I can move the switch, but my phone stays in silent. However, If I plug my headphones in, Then I can hear everything like I am supposed too.   Also, my up volume button does not work.  This is with the headphones also. 
    I have tried doing a soft reset, I reset all of my settings, I updated my software, I restored everything back to factory settings, and nothing has fixed it.  I bought it from best buy and can send it in for service, but the last time I sent a phone in, it took them 3 months!  and I really don't want to go without my phone that long. 
    Does anybody have any suggestions? 
    Thanks so much!!

    Sounds like it either believes that there are headphones plugged in, or the switch is broken.
    Why in the world would you take it to Best Buy for service? Take it to an Apple Store. They can replace it on the spot if it's defective.

  • A65-S159 - I can't use the CD Recovery because my CD/DVD doesn't work properly

    Hi, I need help to reinstall the system and drives. It's a Satellite A65-S159. The CD/DVD doesn't work properly. Rarely, the CD/DVD can read a DVD. So I can't use the CD Recovery. What may I do?
    Thank you,
    Cabula, Brazil

    There are two ways to run the recovery DVD, one is from Windows.  Instead power ont he computer with the disk in the drive.  And imediatly after powering on start pressing the F12 key.  After a few seconds you should see a boot device menu that you can select the CD/DVD drive to boot from.  Try that and let us know if you got the boot menu, and if the disk worked.
    This signature left intentionally blank.

  • When I turn on my ipad2 the volume box appears and does not go away until i hit the volume button on the side and the increase volume button does not seem to funtion only the lower section does?

    I need help. I got an ipad 2 for Christmas and the volume box appears every time I turn it on and it won't go away until I hit the side volume button.  I also realized that the upper portion of the volume key does not seem to work properly.  Any solutions?

    i face totally similar problem so i think its a software flaw. but mine got on quite a long time.
    what should i do, i dun like going to the store in exchange for a refurb one

  • I have an iphone4 that is 2 and 1/2 yrs old and the volume buttons on the side of the phone no longer work, therefore I cannot hear people who call me very well unless I use a handsfree and also when listening to music or watching footage, I cannot alter

    My iphone4 is 2 and 1/2 yrs old, works fine other then the volume buttons just stopped working all of sudden. This function not working means I cannot hear people very well when they call because I cannot turn the volume up and when watching footage i.e. music video or film, I cannot turn volume up or down. This has meant I cannot use my phone like I used to, therefore not fit for purpose. Questions is - Is Apple, under the Sale of Goods Act 1979 obliged to repair/replace my phone for free?
    When I went into my Bromley store today I was told because the phone is not under the 12 month warranty Apple could not help me or I could pay in excess of £100 to get phone repaired, is this right?

    sunshinesunshine wrote:
    So basically if a iphone has a fault after the 1 year warranty period is over, there is nothing the consumer can do but purchase a new phone??
    Pretty much. Except that Apple will replace it for a fixed fee that is far less than the cost of a new phone. In the US the replacement cost for an iPhone 4 is $149. It is comparable in the UK. Unless you can prove that the fault was present at the time of purchase. A switch wearing out would probably be considered normal wear and tear, not a "fault".

  • HT201401 The volume buttons on the side of my iPhone 4S do not work . Is there a way to turn them on or off or are they broken

    Volume button don't work . Can they be turned on and off?

    If the iPhone falsely senses it is docked due to short in the charging port it can disable Volume buttons. Shorting in charging port can be due to dust, debris, etc. If no Warranty, clean with toothbrush and small amount of Isopropyl Alcohol. Never hurts to try a Restore with current iTunes on your computer, too.

  • Volume button on the side won't work

    The down volume button on my iPad will not work.  It has not been dropped.  Does anyone have any suggestions for fixing it?

    Bring it in to apple for exchange.  If you're in warranty it will be exchanged for free; if not your phone will be replaced for $149

  • OK button on the sign in screen of Application Screen doesn't work

    When I go to the App Store to add an app, it asks for my iTunes password. The OK button on this screen doesn't work. Everything works fine in other screens. The CANCEL button works but not the OK. What's up???? Any help would greatly be appreciated!!!

    Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened. The AnchorFree toolbar that you have is a version of the Ask toolbar.
    There are a couple of places to check for the Ask toolbar:
    * Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
    * Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

  • All of a sudden don't have sound on my phone, music, apps, games, notifications. Don't even have the volume bar on videos to turn it up or down, when I press the manual volume button on the side to turn it up nothing happens. Somebody help me fix this

    Somebody please help me fix this issue!!!

    Clean iPhone charging port with clean dry toothbrush. See if better. If still problem, and if there is Warranty or AppleCare coverage, make Genius reservation or set up service and take or send to Apple for resolution. If no coverage, clean charging port again with small amount of Isopropyl Alcohol.

  • So I bought a Used copy of final cut pro 7, but i cant use it because I need a serial number and the serial number that came with it doesn't work. What do I do?

    I bought my copy from ebay and when i got it I installed it, but every time i click on final cut pro 7 it asks for a serial number and when i put the on that came with it, it tells me it an invalid serail number. It is kinda making me want ti throw my mac out the window and just stick with windows.

    First, find out if you bought an "Upgrade" version, or a "Full" version.
    If you have an "Upgrade" version, it will require two serial numbers to work - first, the serial number of the last "Full" version you are upgrading from, then the serial number of the "Upgrade" software you are installing.
    If you have bought a "Full" version, see this KB article with help entering serial numbers in the Pro Apps:
    http://support.apple.com/kb/TS2005
    MtD

Maybe you are looking for

  • Mini DVI to VGA Adapter Video Problem

    This year at Randolph-Macon College we replaced the Math lab Emac computers with IMac G5 Intel machines. The laboratory has an NEC model MT1050 projector with a manufacturer's date of August 2002. We can not seem to get rid of ever present scan lines

  • "Invoice and Delivery No Look  UP "In B2C webshop

    Hi All, We have the Following scenario. 1.A registered User creates the order in B2C web shop 2.The order gets replicated to ECC 3.The Delivery and invoice gets created at ECC. 4.The document flow containing the delivery number and Invoice should get

  • J2EE JNDI-00009 EJB Reference "ejb/SessionEJBCalled" could not be resolved

    When load (run) the following EJB (JDev 10.1.3.1.0 embedded server) loads with no problem: package project2; import javax.ejb.Stateless; @Stateless public class SessionEJBCalledBean implements SessionEJBCalledLocal { public SessionEJBCalledBean() {  

  • N73: I want to save the file Contacts.cdb

    Neither with the file manager x-plore nor Y Browser did I manage to find the file Contacts.cdb in my sister's Nokia N73. I want to copy it to the PC so to save the addressbook. Can anybody suggest how to do so? The file should be in C:\System\Data, b

  • PO release - Wrong agent assignment issue

    Hello friends, i have a strange issue with PO release strategy . A particular PO has been assigned to release group EG and release code F2 . But F2 has no agent assignment defined . However , The PO approval is going for another agent belonging to re