My volume control isn't working....

Ok, so I've had my ipod for years now, and its been fondly loved. Its been working fine up until this point.
Out of the blue, the volume control doesn't want to work. Right now its at 100% volume, and it sounds like its only at 50% volume.
Help?

Sorry to say it but it appears you need to send it in for repair or spring for a new device. Have you tried a hard reset? May help? Worth a shot.

Similar Messages

  • Head phone volume controls are not working after updating to ios 6.1 y?

    head phone volume controls are not working after updating to ios 6.1 y?

    I have tried my head phone with other iphone still the same problem may be my head phones has been not working need to chek my iphone with other head phones which are working

  • HT204492 can someone help me ? My iMac remote control isn't working properly , well all buttons are working apart from the MENU button !! Can anyone shed any light on this ?

    can someone help me ? My iMac remote control isn't working properly , well all buttons are working apart from the MENU button !! Can anyone shed any light on this ?

    As this is the forum for PPC (pre-2006, non Intel) iMacs I assume that is what you have.
    Try pairing the remote again:
    How to Pair your Remote to your Mac:
    http://support.apple.com/kb/HT1619?viewlocale=en_US

  • Downloaded ios7 to my iphone4s and now my volume control does not work 99 % of the time. what can i do to solve the problem

    I downloaded ios7 to my iphone and now my volume control does not work 99% of the time. Is there something I need to do to correct this?

    Adjust the Volume Control in Control Center, or try a RESET.............

  • I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

    I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. 
    There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • When unlocking my iphone with the camera slide, my volume controls won't work on video playbacks.  However, if I unlock the phone normally and open the camera roll I am able to watch my videos and control the volume.  Anyone else notice this?

    When unlocking my iphone 5 with the camera slide, my volume controls won't work on video playbacks.  However, if I unlock the phone normally and open the camera roll I am able to watch my videos with the control of the volume.  Anyone else notice this?
    Thank you.

    Who can help me what are the symbols of a moon and a lock with a partial circle around it not allowing me to turn on or off my phone

  • My beats studio 2013 work fine on my ipad but the mic/ volume control doesn't work on my iphone 5

    My beats studio 2013 work fine on my ipad but the mic/ volume control doesn't work on my iphone 5. Can anyone help me?

    Thanks, daniel.early79!
    I have an iPhone5 bought in late Dec 2012.
    I've noticed on rare occassions that the volume down button some times would not respond.
    Starting yesterday, the volume down button would not respond more consistently.
    Sometimes a reset would fix it, sometimes a reset network would fix it, but the problem would come back.
    Came across this thread, and pressing gently on the upper right hand corner fixed it!
    I remember seeing some video on Youtube or iFixit that shows how to replace the power button. It appears that the volume buttons and the power buttons are tied in together on the same piece of connector. I supposed taking the iphone in and out of cases may have warped or twisted the connector inside the case ever so slightly that the sensor for the down volume button got shifted.
    The down volume button works now, after doing the trick you suggested. I'll wait and see if it comes back before taking it in for warranty repair.

  • Volume control doesn´t work with iphone 3gs

    Hi, the volume control doesn´t work with my ihpone 3gs, i´m using the apple headset, any suggestions???

    ´Till the moment it is, i just recently received a notification with a software update, but i tried with another 3gs with the same characteristics and it worked.

  • When I insert headphones and then I remove them, volume control doesn't works.

    When I insert headphones and then I remove them, volume control doesn't work more, and I have to operate on system preferences=>sound=>output volume. Whay does it happens and  how can I fix it?

        Yes, I am using 09 with out issues.  Just have to remember to use "open with 09" or open pages 09 first then my document.
      I create some amazing cards and posters with 09 that when on a PC I would have to use both Word and Publisher to create.  Flipping back and forth. 
      Apple if you're  listening please, give us back our layout options and even add a few more design options like beveled and 3D text.

  • 2G Touch: Music is far too loud. Volume controls don't work.

    My Touch is very new and it looks like there is stuff I don't understand yet.
    When I play my music, any track, it's way too loud and is injurious to hearing.
    I have slid the volume slider all the way to the left. No result. The slider does nothing.
    I have used the volume buttons on the left of the Touch. No effect. Way too loud.
    I have used the Volume Limiter in Settings>Music. It's all the way to the left. No effect.
    Clearly the Touch must not be used to listen to music until I get my volume control working.
    "Reset all settings" has no effect on the volume problem.
    Any Suggestions?

    OMG! Found it. Very unintuitive.
    The Touch volume controls do not work if the 'Pod is sat in the Apple Universal Cradle. I was using the cradle without the USB cable.
    That makes little sense to me.

  • IPod nano version 6:  random turn off, volume controls don't work, does not turn off, skip does not work.  Two years old!  Next version of nano has no clip and same amount of storage.  I do not want to give up my version 6!

    iPod nano version 6:  random turn off, volume controls don't work, does not turn off, skip does not work.  Two years old!  Next version of nano has no clip and same amount of storage.  I do not want to give up my version 6!

    Make a Genius Bar appointment at your nearest Apple Store and pay $75 USD for an out-of-warranty replacement.

  • Ipad Keyboard volume controls don't work?

    When I have headphones plugged in to the jack on the keyboard the volume controls don't work. If I plug them in to the jack on the Ipad then the volume controls work. Known bug? Defective unit?
    Any help appreciated.

    The keyboard controls, but nevermind. I found out they're not supposed to work on the aux jack on the back of the keyboard. Guess I should RTFM
    Thanks anyway, everyone!

  • Keyboard volume control does not work

    I have an iMac G5, running OS 10.5.8, and a new Apple Keyboard with Numeric Keypad. My keyboard volume control does not work. Any have ideas as to why ? (I have a similar set-up at work with no volume problems.)

    Try system prefs/keyboard/keyboard/ and uncheck Use all F1, F2 etc as standard function keys.
    Other wise the volume and brightness controls will only work if you hold down the function key first (fn)

  • Volume control doesn't work

    Had 2 kernel panics recently, and been noticing a string of strange issues, one of which is that the Volume control doesn't work, or specifically, it doesn't affect many applications.
    For example, when using Chrome, if I want to use the volume control to icrease or decrease volume on a movie (YouTube etc), the hardware controller keys (F10 - F12) do not have any affect on volume, but I am able to change it using the software interface of the current player.
    Something has gone haywire with my laptop... disks are unmounting as well (USB & FireWire 800), major settings seem to have returned to default (trackpad and other), and installed software seems to have disappeared (eg, Paragon NTFS). I am concerned!
    Help, please!
    I am still using 10.6.8.
    Peter

    I am having the exact same problem. I just did a complete re-install of max os x and did all of the updates..my hard drive had crashed so i had to replace it. lot's of fun.. and after the last upgrade i can't use my sound at all.. the sound shows that it's all the way up but it has the "no Smoking" sign as well..
    i have tried to restart.. change options and whatever else i could .. i did notice that when i enable the option to show the sound icon on the main bar that there is just a blank spot where it should be.. and i can't change it form there either because it just doesn't show..
    any one seen this before.. ?
    all my other Mac's work fine..
    please help..

  • Volume control doesn't work on AOL radio

    The Volume control doesn't work on AOL radio. I does work in iTunes and with music. Is there a way to reset AOL radio?

    To be honest Im not quite sure why this volume indicator is not visible on the screen but in my opinion its really not a serious issue
    I mean the sound is working properly and this is only a indicator which shows you a current sound level
    However, I think its something wrong with an process which cannot be started or a registry issue

Maybe you are looking for

  • Samsung HDMI 1080p no longer works after 10.8.4

    Has anyone else had a new problem with HDMI connection to their Samsung LN40B series TV failing to successfully work at 1080P since installing 10.8.4? This is happening via mini display port ---> HDMI connection with both a MacBook Air and MacBook Pr

  • Error in installing TestStand 2012

    Hi, I am seeing strange error while installing TS 2012. The attached files shows the error. My system has P4 processor with 2 GB memory and Win XP is the OS. Please help me in installing TS 2012. Thanks Attachments: 1.JPG ‏13 KB 2.JPG ‏22 KB setup.in

  • My refurbished iPhone 5 display has a yellow tint?

    I got a replacement iPhone from AppleCare today, and I've got everything figured out with my new iPhone 5. When I was texting my friend, in messages I noticed the white background in the messages apphas a yellow tint to it. To make sure I wasn't seei

  • Purchase info record for material groups

    Hi all, We have purchase info records for material groups, not material specific. When I create and activate integration model for these info records, no info record is sent to APO. Is there a way to create Transportaiton Lanes automatically in APO?

  • Javascript folder locations

    Hi. I'm currently working on a short reference documentation for a client. This documentation has to instruct the client on how to place a trusted function script in the user javascript library. My client works in Acrobat 8.0 standard and Acrobat 7.0