My volume controls don't work

The volume controls on my Nano don't work. How can I repair their operation?

Read the PDF user manual for a possible solution: iPod Manuals, search through Apple's Knowledge Base for support Articles and/or iPod Nano Support

Similar Messages

IPod nano version 6: random turn off, volume controls don't work, does not turn off, skip does not work. Two years old! Next version of nano has no clip and same amount of storage. I do not want to give up my version 6!

iPod nano version 6: random turn off, volume controls don't work, does not turn off, skip does not work. Two years old! Next version of nano has no clip and same amount of storage. I do not want to give up my version 6!

Make a Genius Bar appointment at your nearest Apple Store and pay $75 USD for an out-of-warranty replacement.

Ipad Keyboard volume controls don't work?

When I have headphones plugged in to the jack on the keyboard the volume controls don't work. If I plug them in to the jack on the Ipad then the volume controls work. Known bug? Defective unit?
Any help appreciated.

The keyboard controls, but nevermind. I found out they're not supposed to work on the aux jack on the back of the keyboard. Guess I should RTFM
Thanks anyway, everyone!

2G Touch: Music is far too loud. Volume controls don't work.

My Touch is very new and it looks like there is stuff I don't understand yet.
When I play my music, any track, it's way too loud and is injurious to hearing.
I have slid the volume slider all the way to the left. No result. The slider does nothing.
I have used the volume buttons on the left of the Touch. No effect. Way too loud.
I have used the Volume Limiter in Settings>Music. It's all the way to the left. No effect.
Clearly the Touch must not be used to listen to music until I get my volume control working.
"Reset all settings" has no effect on the volume problem.
Any Suggestions?

OMG! Found it. Very unintuitive.
The Touch volume controls do not work if the 'Pod is sat in the Apple Universal Cradle. I was using the cradle without the USB cable.
That makes little sense to me.

Volume controls don't work in Messages iOS 8. And music stops playing when I open Messages

My volume buttons don't work when I'm in Messages on iOS 8, I can't change the ringer or headphone volume. More annoyingly music stops playing when I open Messages, but I can start it again. Any help on this would be greatly appreciated.

For all of you, the first thing to do when these things happen after an update, is to close all your open apps and reset. This will cure your ills 99.9% of the time:
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

My earbuds volume control don't work with my iphone, but it does on my ipod?

I've done everything from blowing in the headphone jack to cleaning it with an q-tip and restoring the iphone. i know my ear buds work since the volume up and down and the play and pause controlls all work with my ipod touch but when i try using it with my iphone the controls still don't work. i'm about to go over to apple and get this replaced. the iphone is pretty much new too. i might've gotten some water inside it when i was putting on my screen protector but it wasnt that much.

Count me in. I have the "Backup ccould not be completed" error since november.
Yesterday it worked once right after I restored my iPad while iTunes transfered all the data back to my iPad. So it is definitely not a problem on the iCloud side but on the iPad's Apps side.
My guess is that it might be just one app's data which blocks iOS from backing up correctly...
Any ideas?

Nokia X6 volume controls don't work for music play...

Hi all
Just brought a new Nokia X6 for my wife and I have an odd problem.
I can start the music player from the home screen and skip forward and backwards a track with no problems. But I can't adjust the volume.
If I start playing music from the home screen and it's too loud or quiet, I have to open the music player itself before I can change the volume.
This seems very odd to me, and I have googled it and looked all the way through the forums here for the X6 and no one else has mentioned it. Does that mean it's only me having this trouble? Or does everyone else not use the music player from the home screen?
Also, I noticed that I cant fast forward and rewind a track from the home screen. If I hold my finger on the Foward button for an extended period of time, the track continues playing as normal and then ether skips to the next one when I take my finger off, or all the player buttons disapear from the home screen when I take my finger off.
Again, if I do this in the music player itself, the track will fast forward or rewind after a second or two holding the 'button' down. Anyone else tried this?
Thanks everyone in advance.

Yes, I realise that, but it only works when you are in the media player. If you are playing music from the home screen, then the volume button does nothing!! Is this how it's supposed to work?
I have looke right the way through the manual and it doesn't mention playing music from the home screen at all.
It seems odd to me that Nokia would build a phone expressly for playing music, have music controls on the front screen so that the user would not have to go to the music player to play music, then disable the volume controls on the home screen so the user is forced to go to the music player anyway.

I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

HP keyboard volume controls don't adjust anymore after upgrading to W7 64 bit

I have an a6430f that I upgraded to W7 64bit. I don't see drivers for W7. The mute button does work on the keyboard, but volume controls do not work. Is there a fix for this?
This question was solved.
View Solution.

Jomak123,
Try this driver for windows 7
Original HP Multimedia Keyboard Driver
sp46377.exe
Let me know how everything goes
Have a good day.

Volume keys don't work anymore after Gnome 2.26 upgrade

I have two pc: a desktop and a laptop. The desktop doesn't have this problem. While on the laptop, a sony vaio fz21s, after the recent gnome 2.26 upgrade, the volume keys don't work. The osd appears on the screen but no change in volume is observed. Through the gnome-volume-applet i set "Principal" as main device. Controlling the volume with the gnome-volume-applet works.

ad1g3n wrote:I solve this problem with adding alsa to DAEMONS array in /etc/rc.conf
I have it too
My laptop works perfect, i need to solve only this

Motorola S9-HD audio controls don't work with 3GS?

I'm the recent and proud owner of a 3GS and Motorola S9-HD headset. The headset easily pairs with the phone and plays music flawlessly (sounds awesome too). Only catch is that the only controls that work on the headset are the volume. The audio controls don't work at all.
Anyone know of a work around for this or if I'm just out of luck...

Word is the OS3.O for iPhone does not support full implementation of music controls via Bluetooth. Not a defect of your headset. As we all know, Apple has been dismal at implementing Bluetooth on its devices. However, word is that OS3.1 update for iPhone will fix this. I have both the Motorola S9-HD headset and the Motorola S805. Neither has full control with my iPhone 3GS using the current OS.

My Bose SIE2i volume control does not work. (pause/play does work). This is the secone set - the apple store in Sydney replaced the firsat set that had the same problem. It was working OK and has stopped.

My Bose SIE2i volume control does not work. (pause/play does work). This is the second set - the apple store in Sydney replaced the first set that had the same problem. It was working OK and has stopped.

Thanks again V.K. I did check the layout, and it was listed as alphabet when I inputted the password. So that doesn't seems to the the issue.
Just finished a truly mystifying experiment, but I put in a shorter password in the way mentioned earlier and it worked. I then systematically kept increasing the characters of that password and it seems that if the password starts to exceed about 16, it stops recognizing it. I am fairly sure it is not the password itself since it never gives an error when typing in the verification password. So unless I systematically make the exact mistake twice at the setup screen, and then don't or make a different mistake every time at the login screen, I don't think its my typing skill.
So problem solved for now, but I am still a bit worried. Maybe I should completely reinstall and use a shorter password.
Is there supposed to be a length limit?

IPad 2 Rotation, Sleep, and Volume Buttons Don't Work.

I have an iPad 2 running 7.1.1 (11D201) and just yesterday the sleep sleep and volume buttons don't work, and the screen won't rotate at all. I have already tried the following:
Switched the Lock Rotation/Mute settings in General
Power cycling it
Held the sleep and menu button to reset it (the button worked for that at least)
Done a network reset
Reset All Settings and restored from backup
Reset All Settings and restored from iCloud
Erase All Content and Settings and restored from backup
Erase All Content and Settings and restored from iCloud
If anyone has any OTHER suggestions besides what I've already tried, I am all ears. Thanks.

Go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again. Also, if you have IOS-7, read this.

My earphones mic and volume buttons don't work ever since the iOS 8.1 update! Please help me. One discussion person says they bought a new pair and THEY don't work either. What do I do? I'm about to have a breakdown!

I rely heavily on my earphones because well... I'm lazy but they don't work. They work on my friend's iPhone who hasn't updated yet but I've updayed and the mic and volume buttons don't work. Please make a correct update!

Nope, still same problem. I did an install, didn't work. Then I completely removed my IDT driver, restarted, installed the driver, restarted, same problem.
When I troubleshoot my audio it always asks me which one to troubleshoot. It only works if I do one of the "Speakers / HP - IDT" but I don't know why it has so many devices listed with the same name.
Also, after I troubleshoot and I can hear audio, if I go to "Manage audio devices" it still shows that no audio device is installed, which is why the webinars won't work.

Head phone volume controls are not working after updating to ios 6.1 y?

head phone volume controls are not working after updating to ios 6.1 y?

I have tried my head phone with other iphone still the same problem may be my head phones has been not working need to chek my iphone with other head phones which are working

My volume controls don't work

Similar Messages

Maybe you are looking for