My volume doesn't work as I dropped my ipad2 and dented near the volume buttons.

Hi, my volume doesn't work as I dropped my iPad 2 and dented it near the volume button, any idea what i could do to fix it or how much this would be to get it fixed only got it at christmas 2013 so should still be in warenty??

Warranty doesn't cover drop damage unless you purchased Apple Care +.
Some iPad users have been able to revive their dropped iPad. Turn the iPad over and give it a HARD SLAP on the back. May take several slaps.
dropped iPad
https://discussions.apple.com/thread/4474708?tstart=30
Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
The warranty will apply to the country of purchase. And if there is a problem needing repair you have to return it to the country of purchase.
Apple’s Limited warranty can be found here:
http://images.apple.com/legal/warranty/docs/ipad_warranty.pdf
Out-of-Warranty Service
     If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)   
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th, Air
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
iPad Repair and Service
http://www.apple.com/support/ipad/repair/
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iCracked - Broken iPhone, iPod or iPad
http://www.icracked.com/
iReVamp Electronics Screen Repair ($99)
http://www.irevampelectronics.com/ipad-2-broken-glass-screen-repair.html
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
Do It Yourself iPad Repair
http://www.ifixit.com/Device/iPad
 Cheers, Tom

Similar Messages

  • Since Lion installation the remote control first generation, doesn't work as usually. On Leopard when I pushed the menu button, it opened a menu that showed music, films, photo. Now it doesn't work anymore. Is there anyone to explain me why this happen?

    Since Lion installation the remote control first generation, doesn't work as usually. On Leopard when I pushed the menu button, it opened a menu that showed music, films, photo. Now it doesn't work anymore. Is there anyone to explain me why this happen? Thank you.

    Sadly Snow Leopard was the last OS X to have Front Row and it is no longer offered in Lion or Mountain.
    see > Farewell Front Row | Macworld
    If you want, you can get it back with some tweaking.
    see > Get Front Row for Mac OS X 10.7 Lion
    or > Use Front Row In OS X Lion
    Also note: that your remote should still be working for waking the Mac, volume control and iTunes...? If it is not, let us know for help with it.

  • When I have finished working on an image in Photoshop and I hit the save button it goes instead to the "save as" screen. This never happened in previous Photoshop versions. When I get to Lightroom, I have a grey screen the says "File could not be found."

    When I have finished working on an image in Photoshop and I hit the "save" button, it goes instead to the "save as" screen. This never happened in previous Photoshop versions. When I get to Lightroom, I have a grey screen the says "File could not be found." I then have to go to "locate" to get the image. When I select the correct image, I get a message that it is not the same file name but I am eventually able to access the image. Needless to say this is having a negative impact on workflow!

    The problem with write permissions for the OneDrive folder only shows up in Lightroom 6's export dialogue, that's why it's to irritating. Lightroom 5.7.1 is not having that problem nor does the file explorer. The problem also exists on both of my machines. I will try to check for other problems with the OneDrive troubleshooter though: Running the OneDrive troubleshooter - Windows Help   

  • Sound on my ipad only works when I enter my pass code and when I play games. But when I typed, however, or try to listen to music/YouTube/Netflix, the sound doesn't work. When I double tap and go to the task manager, the volume slider has no dot. Help?

    I did not have this problem earlier today. I haven't dropped it recently or any such thing. I have, however, used two different audio jacks today. Although it makes keyboard sounds when I type in my pass code, it doesn't make the sounds otherwise. I also tested the sound on temple run and it worked. My slider key is set to mute, not to lock screen. When I try to adjust the volume, it'll say "sound effects" and the volume will be turned all the way down, but it won't let me turn it up. I got this iPad in December and unfortunately did not purchase AppleCare and I believe the warranty has passed. Any suggestions as to what's wrong?

    Try A and B
    (A) Restart iPad
    1. Hold down the Sleep/Wake button until the red slider appears.
    2. Drag the slider to turn off iPad.
    3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
    (B) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Power button doesn't work after new update...and that's the least of it

    Ever since I updated my 4S with the new software my phone has had so many problems:
    Power button no longer works. I have to hold both the home button down and the power button to "reset" my phone to turn it off.
    I am having to do this CONSTANTLY b/c my phone freezes up ALL the time. When texting, using maps, other apps. Sometimes I can't get the freaking thing to even unlock. Texting is a disaster. Half the time they don't go through and when my phone freezes up for the millionth time that day and I reset, I later find out that my freaking texts didn't even go through. I HATE THE NEW SOFTWARE HELP!!

    If you are able to hold your home button and sleep/wake button down at the same time to reset the phone, you should be able to power it off just fine...

  • IPod Touch Volume doesn't work!

    My iPod Touch 4G's volume doesn't work! When I increse it, it decreases automatically or, It stays for a while & it gets on 0 again!! What do I doo?

    Try the standard fixes in order:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore from backup via iTunes
    - Restore to factory defaults/new iPod

  • Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

    Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

    Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

  • Home button and volume doesn't work

    My iphone 4 home button and the volume doesn't work.  Have Besy Buy black tie protection plan but they want me to be without my phone for almost a month to repair.  I can't do that.  What can I do to fix myself?

    You don't.
    If you are under warranty, you can bring it to tha Apple Store and have them look at it.

  • I backed up my phone before i went on vacation. I dropped my phone in a pool and now it doesn't work, is there any way that i can get the pictures that I took on vacation off of the phone?

    I backed up my phone before i went on vacation. I dropped my phone in a pool and now it doesn't work, is there any way that i can get the pictures that I took on vacation off of the phone?

    IF you had icloud backups and Camera Roll turned on in Settings on the wet phone, then you can restore that backup to an iOS device, but not a computer.
    http://support.apple.com/kb/HT1766?viewlocale=en_US&locale=en_US
    Once you get a replacement phone...
    Go to Settings>General>Reset and tap Erase All Content and Settings.  This will erase your device.  Then you will go through the setup screens again as you did when your device was new, and when given the option, select Restore from iCloud Backup.
    This link gives another overview of backup and restore:
    http://support.apple.com/kb/HT4859?viewlocale=en_US&locale=en_US

  • Ipod doesn't turn off and volume doesn't work

    My Ipod touch is 2 months old--all of sudden it wont' turn off and the volume doesn't respond.
    I have charged it, synched it and done a restore--nothing fixes.
    It sometimes will allow me to turn the volume off (once a day) but then most of the time doesn't respond
    I can't click "home" and "off" at the same time b/c all that does is turn the voice recognition on.
    Any ideas?

    Hi,
    Try placing your iPod in Recovery Mode and restoring it to factory settings/defaults via iTunes:  http://support.apple.com/kb/HT1808.  Otherwise, make a reservation at the Genius Bar of your local Apple Store. 
    Hope this helps! 
    ---likeabird---

  • I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions.

    I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions. HELP PLEASE!

    yeah i plugged in my iphone to my computer and itunes does not even notice that i plugged it in.

  • HELP, My SWF doesn´t work in latest versions of IE and Safari

    I have a swf made in Flash CS4. It works fine in firefox and older versions of flash player in IE, but it doesn't work in recent versions of IE and Safari In this case just I can hear the music.
    Could help me please, my URL is:
    http://www.quecolor.com.mx/UAT/

    Hi,
    Did you try embedding swf using SWFObject via JavaScript ? Here is more information on how to embed swf using swfobject. http://code.google.com/p/swfobject/wiki/documentation
    Thanks,
    Karthikeyan R.

  • Hi, can someone please tell me why the spell check in pages doesn't work. I went to preferences and enabled this auto spell checker and have set the language to british english. But still it doesn't work while it works perfectly in TextEdit.

    Hi, can someone please tell me why the spell check in pages doesn't work. I went to preferences and enabled this auto spell checker and have set the language to british english. But still it doesn't work while it works perfectly in TextEdit.

    Inspector > Text > More > Language
    Only applies to selected text, like making it a particular font.
    It is not a setting that sticks. If you continue to paste in text from elsewhere particularly the Internet it will have a different or None language set to it. You need to select it and make it B.E.
    Peter

  • I upgraded my 3 yr old iMac to Snow Leopard and now my HP C4150 Scanning function doesn't work (not recognized).  I downloaded updated Drivers from the HP site, but still no joy.  Any suggestions?

    I upgraded my 3 yr old iMac to Snow Leopard (OS X 10.6) and now my HP C4150 Scanning function doesn't work (not recognized).  I downloaded updated Drivers from the HP site and installed them, but still no joy.  Any suggestions?

    aspaceman,
    Perhaps I owe you an apology.   Having re-read that downloading from HP was unsuccessful I feel uncomfortable.  Can I suggest you update your 10.6 system (as noted in your profile) to 10.6.8 (if it is not already there) by using the
    Mac OS X 10.6.8 Update Combo v1.1 combo update plus any software updates that then apply.  

  • Why some contact forms doesn't work on some websites? We don't receive the submission form with the information?

    Why some contact forms doesn't work on some websites? We don't receive the submission form with the information?

    Hi Aish
    I wanted to check the following, but the URL is not found, you have another one?
    thanks
    Nicole
        4. Visit http://my-site.com/scripts/form_check.php in a web browser and make sure you see all green checkmarks. If some items do not display green checkmarks that means that the hosting server is not configured correctly to allow the Form widgets to send email messages to the address you've specified.
                    Contact your web-hosting provider about the server configuration problem. Describe the items that are not marked as green in the form check page, so that they can help you set up the servers to use the correct settings.
    Il giorno 9-set-2014, alle ore 16:11, Aishvarya Raj Rastogi <[email protected]> ha scritto:
    Why some contact forms doesn't work on some websites? We don't receive the submission form with the information?
    created by Aishvarya Raj Rastogi in Help with using Adobe Muse CC - View the full discussion
    Hi Nicole,
    What is the "From" email address in your form?
    Also, have you checked the spam folder?
    Please check the following posts as well :
    https://forums.adobe.com/docs/DOC-3581
    Re: PHP mail may be disabled or incorrectly configured on the web server.
    Regards,
    Aish
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6714281#6714281
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Maybe you are looking for

  • Can I write a Java Program in Narrative view and make it work?

    Hi All, I got a requirement which demands me to write a java program in narrative view. As per my knowledge its not possible..........but do you guys have any work around or any other way to get that java program run when the report runs and the out

  • How to convert videos to bitmaps?

    I couldn't find an solution how to load videos with Java and then convert still images to bitmaps. I should make a program that loads video files and then does some processing to the images after I get the data in still images. Is it possible to use

  • With an upgrade to RoboHelp 11 from RoboHelp 9, does the upgrade cost cover any additional upgrades, such as 11.1 or 11.2?

    I previously purchased RoboHelp 9, and this covered me for the updates to 9.1 and 9.2. If I upgrade to RoboHelp 11 directly, will that 600$ cover any potential 11.1 or 11.2 updates?

  • How do I download CS 5.5. to my new computer?

    I had my computer stolen, and now want to download my already paid for CS 5.5 on my new computer. But it's not available in the Downloads list anymore, since CS. 6 has now hit the streets. Do I have to pay for an upgrade to get CS on my new computer,

  • Variants in Query in standard area

    Hi, We have recently upgraded to ECC6.0. The queries/infoset/usergroup has been transported. But while executing the queries with variants, a message is displayed as "Variant <var> is not created". But the variant is visible while selecting through F