My volume is really low even when turned all the way up.  Is there a fix?

I got this ipod for fathers day and just started messing with it this weekend.  The volume is really low.  I downloaded my music and have tried several songs plusdifferent earphones and the radio on the ipod.  I can hear it but it is to low to run with.  I think ill here myself panting over it.  Is there a fix or does apple support the problem?

Hello dreuer
Try out some of the troubleshooting steps in the article below, it will go into checking Bluetooth connections as well as restarting your iPhone.
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
Regards,
-Norm G.

Similar Messages

  • HT1937 my receiver volume (5s) is very low even when turned all the way up. is there a setting to correct?

    my receiver volume (5s) is very low even when turned all the way up. is there a setting to correct?

    Hello dreuer
    Try out some of the troubleshooting steps in the article below, it will go into checking Bluetooth connections as well as restarting your iPhone.
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Regards,
    -Norm G.

  • Vol is low even though adj all the way up.

    I have set up and adjusted vol high and still is low how can I correct this problem ?

    Hi,
    One thing can help is the following.  Right click the speaker icon in the Taskbar and select 'Playback Devices'.  Left click the default device once to highlight it ( it's usually 'speakers & headphones' ) then click the Properties button.  Click the Enhancements tab and put a tick in the box next to 'Loudness Equalization'.  Click Apply to save the change and then click OK in all remaining windows and see if this has helped at all.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HT4110 my brightness on screen is fading even though turned all the way up

    does anyne know how I can fix this or do I need to take to a service dept.?
    Thanks

    Hello dreuer
    Try out some of the troubleshooting steps in the article below, it will go into checking Bluetooth connections as well as restarting your iPhone.
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Regards,
    -Norm G.

  • IPad air keyboard  makes sound when volume is turned all the way down

    My iPad air's keyboard makes noise, even when the volume is turned all the way down. Is this normal? If so how can I turn off the keyboard typing noise without disabling entirely.

    Aloha Raptorcheese, Good news, if you have you have change with buttons turned on you can control the keyboard volume with the normal volume control. No need to go back to settings all the time.

  • ITunes crashes upon opening after telling me the volume is turned all the way down....

    After updating to iTunes 11.1.3, everything was fine initially. Suddenly though, as of yesterday, my iTunes decided that it was going to turn off it's own program-controlled volume. It was kind enough to alert me to this, and I closed the warning about it and set about raising the volume, wondering why I had turned it down in the first place. At this point though, iTunes had stopped responding at all. So, I forced it to quit, reopened it, and once again it alerted me to the fact that the volume was turned all the way off. Okay, I said, told it not to warn me again, closed the warning and then there was a new alert about the fact that my previous forced closure of iTunes resulted in extra windows being closed that it was now asking me if I wanted to reopen. I can't even click on the "Don't Reopen" button, as the program itself once again stops responding after I acknowledge the first warning about the lack of volume. Anytime I open iTunes it does this (repeated without fail, several dozen times now...). Once iTunes is open, none of the options in the Help or Edit or File or any of those buttons in the taskbar are actually clickable, since I can't do anything before acknowledging the alert about the volume, after which it inevitably stops responding. Tried restarting the Mac to no avail. Tried downloading and installing a fresh iTunes hoping it might repair the damaged files, to no avail. I can't actually remove the current iTunes from the computer since apparently it is 'essential to OS X'. Not really sure how to go about fixing this issue.....could anybody shed some light on this?
    Thanks!

    In that case I would reinstall your itunes. It will just install over the top of the existing program. As a precaution it is usually wise to make a copy(Backup) of your itunes folder when installing itunes. It should not affect anything but you never know
    You can find the install package for itunes 11 here
    http://www.apple.com/itunes/download/

  • I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up, I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up

    I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up, I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up. Any ideas?

    Go step by step and test.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers.
        Make sure that Mute is not enabled.
    2.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.

  • Why is my iTunes volume turned all the way down every time I launch the program?

    Everytime I launch iTunes I get a warning and my iTunes volume is volume is turned all the way down. How do I fix this?

    This worked for me:
    Close iTunes
    Open Finder and navigateto: Users>YourAccountName>Library>Preferences>com.apple.iTunes.plist
    Move that file to the desktop
    Launch iTunes (which will create a new prefs file)
    If the problem is now fixed, move that prefs file from the desktop to the Trash. There might be some personal settings in iTunes you will need to re-do.

  • My iPad 1 does not make any of the sounds (key clicking, etc) I have directed it to despite having volume turned all the way up...any thoughts?

    my iPad 1 does not make any of the sounds (key clicking, etc) I have directed it to despite having volume turned all the way up...any thoughts?

    Check to see if the "silent" switch is turned on. This is either the hardware switch next to the volume control or a software switch on the "recent apps" tray depending on how you have your iPad configured (Settings > General).
    Too see the software switch on the "recent apps" tray double-click the Home button and swipe the tray to the right.

  • HT201210 the screen on my ipod touch will only show the apple icon it will not turn all the way on

    the screen on my ipod touch only shows the apple logo.it will not shut off or turn all the way on and when plugged into itunes it will not allow the newest update

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Mini Dvi to hdmi problem, the mini dvi doesn't even plug in all the way?

    hi,
    i have a mid 2007 macbook, i just bought a mini dvi to hdmi cable, i tried to plug it in and it doesn't even plug on all the way, 1/3 of the conector is still hanging out, and it doesnt display anything anyways, nothing is detected on the macbook or the TV.
    somone seem to have the same exact problem as me with the laptop, but his query wasn't answered it was the last post on this thread.
    https://discussions.apple.com/thread/3660057?start=0&tstart=0                        

    Thanks for that. I have a Y adapter (3.5mm stereo headphone jack to RCA sound just like you said). Under input options on my TV, I can select either HDMI1 input (which gives me video only) or AV1/S input (which gives me audio only) - not both at once...Could you explain how I can get stereo audio on my TV?

  • Display is dark. Its is turned all the way up in settings? how do I fix it?

    After the latest update. My daughters Ipod nano won't light up. In the settings, its turned up all the way. How can I fix it without a factory reset. She will loss all her music and movies.

    Try resetting it and check for solutions in the "More Like This" section over in the right column.
    It would be helpful if you would tell us which model iPod Nano you have?

  • All-in-one PC volume is too low even when maxed out

    When playing web content with sounds like youtube videos, the sound is too low even when the volume in the cotrol panel is already maxed out. what do i do?  My desktop is an hp 22 all-in-one touchsmart pc.
    Thanks!
    Cynch

    Hello @Cynch,
    I understand that you are having issue with your HP TouchSmart 22 All-In-One Desktop PC where the volume is low when listening to online content. I would be happy to assist you, but first I would encourage you to post your product number for your computer as there are various version of the HP TouchSmart 22. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • HT3576 Can you get sound notifications for mail and iMessage with the new iPad. Under general sounds I have a sound selected for both of those. My volume is turned all the way up but I still don't get sound notifications with these apps. Suggestions?

    I have sound turned on under general> sounds. The volume is all the way up and I can hear it when i adjust it. However under notifications sound is not an option for mail or iMessage. Just badges and alerts. Both of which are on. I would really like to hear my notifications. Any suggestions.

    1. Double-click the Home button and swipe Task Bar to the right
    2. Check the volume and mute settings
    http://i1224.photobucket.com/albums/ee374/Diavonex/6d3191ba.jpg

  • HT1386 my phone will no longer turn all the way on or sinc... It just says activation required.

    My I phone will no longer turn on all the way or conect with my computer all the way to sinc.... keeps saying "activation required"? How do I activate?

    The only time I have ever seen that is when my SIM card is out of my phone. Try opening the sim card tray and then replacing it after a minute. Use a paperclip to pop the door open on the side of the phone (if it is a 4 or 4s) or on top (if 3GS) and see if that changes the alert message. Check back with status if that doesn't help. You can also trying a full restore by plugging it into your computer and opening iTunes. When it recognizes the phone click on the phone name in the left menu and hit restore. This will erase the phone but if you have a backup you can restore from that after it resets the phone or you can set it up as a new phone and start from scratch. Good luck, let me know if this helps.

Maybe you are looking for

  • Batch Change Photo's

    Hi, I am looking to make a number of changes to photo's that I receive to make them web friendly. I would like to be able to select a bunch of photo's (say around 70), reduce the size on disk, reduce the width to around 500px and also change the phot

  • Android Remote Debugging Help

    Hi everybody, I'm using Flash Professional CS6 and am trying to deploy my application to an android device and remotely debug it via wifi, but the problem is that it won't automatically install the app on the device. Debugging works if I transfer the

  • Highly Available Management Servers in SCVMM 2012

    Dear All,             I need to build Highly Available Management Servers (2) (SCVMM 2012) for my environment.  I am interested in following things: 1.  What are my options.  I have done little reading and seek confirmation that without building a wi

  • Snow Leopard Freeze on Screensaver with "Alias" jpg-pictures?

    Hi all I have now updated my 10.5 to 10.6 installation. My Setup for Screensaver on 10.5 was: - Folder in Photo-Folder "Screensaver" - in this Folder I have a few "Alias" (Links) to Fotos in the other Photo-Folders - Setup of Screensaver => Added thi

  • Video glitchy pauses jumps and stutters

    Hi there I seem to be having prolems with video playback on my MBP. Often on You Tube for example after the video is fully downloaded on playback the video sporadically pauses or jumps forward or behaves generally glitchy. I do not believe it to be t